N79 Power Saver Theme Problem

I bought an N79 just last mounth.
it's a sweet phone but i have an small problem.;
when i choose a theme for power saver (Date, text, slide show , ....) it have been shown for only 2 seconds and disappear and screen goes to BLACK.
even i choose longest time for power Saver but it did not work.
anyone has problem like this? any idea?
Does NOKIA fix this problem in new firmware?
how can i report this BUG to NOKIA?
thanks
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA

I really doubt this is a deliberate design. Most other Nokia phones have the same "power saver" which pops up when the phone is idle, and all of them - even current ones - are set up so that:
1) The power saver appears after its timeout
2) The backlight switches off after its own, independent timeout
3) The power saver remains shown regardless of the phone's current state
Why would the Power Saver have its own timeout and selection of Power Saver screens designed to show you the date and time, if it can only be shown for 2 seconds? I'm disappointed that Nokia support is disregarding this issue, but I assume it's more out of ignorance and a stock response than any insight into their plans for future firmware updates. Is there a "bug report" page or something we can use to ensure it's properly logged and not just dismissed?
Help I'm trapped in a sig factory.

Similar Messages

N79 power saver, can't animate

I just bought my N79 ..... quite cool ..... The problem is with the power saver. I like my phone to animate the clock after power svaer, It just go to black screen without the animation of the clock. Anyone know how? The other thing is in other model of nokia when you press the red cancel button in lock mode, the clock will also come out. In N79 can't do that... Ant tips on how?

I just want to comment on my view. How I see it, N79 is more interest in saving power and ready to jump online (internet). But there are so many problems like small graphic, slow connection and so on. For the same amount people could just get a notebook and internet is so much faster.... My suggestion is Nokia should concentrate more on handphone as a handphone. Camera is good. Animation should also be available, more priority comre to internet. A survey can tell how many people surf internet with handphone, very few. I hope future realease have the option of offline ( no internet) but with the option of a handphone of can call and receive call. After all is still a hanphone not a notebook. It would be nice to have a notebook with a camera and handphone features.
Thanks, I hope Nokia can do more survey on what customers want as they are the one buying.

N95 8GB power saver lightning problem !?

Hi There ,,
I just got my new N95 8GB
everything works fine , until i saw this problem
i have this strange screen(power) saver lightning
like if it was flashing or some like that
so if anyone had this problem please help
Model: N79
Type: RM-348
Software version: 11.049
Solved!
Go to Solution.

if you are talking about that flashing light at the top of the phone near the front camera, then there's nothing to worry. its normal. its just to indicate that your phone is 'swithced on'. if you observe,when your phone goes into power saving mode, the screen is absolutely blank. its almost impossible to tell if the phone is on or not from a distance.
This is the prupose of that light.
Well....the good news is that you can turn it off if you don't like it.
I dont recollect how but it can be done via settings somewhere i guess.
List of Nokia phones I've used: 3310, 3315, 3200, 6600,3250, N73 ME, N95 8GB, 5800 XpressMusic and Nokia X6 16 GB (currently using this).

Power Save Polling Problem

Hi,
i have a problem with my access point. it is a problem of my access point but i have to workaround. ok now to the problem. when i connect to a old accesspoint(where i have no control over the firmware) i have massive packet lost if i have no power cord connected. it seems it is a problem similar to http://www.intel.com/support/wireless/wlan/sb/cs-006205.htm
i have not found a workaround for my ibook.
is there a way to disable this PSP capability.
thanks in advice
thomas

I assume you mean the 7.2.1 update? Yes, that is the version running on my base station.
I should point out that my base station's radio mode is configured for "802.11n (802.11b/g compatible)" - but that should be obvious, since the 3945ABG adapter doesn't support N. The original poster to this discussion indicated his base station was running in 802.11n mode - but I assume he hadn't meant "N-only" mode.

N79 Power saver

Had this phone for a couple of days now and very impressed with it. But does anyone know how to make the powersave display stay on?
I set it to just display the date and time bar but after the light goes off the date and time bar only stays on for a few seconds then all i have is a blank screen.
I could get it to stay on with my N95 and quite a few nokia phones iv had before it.
thanks in advance for any help as i like to have this on so i can just have a quick look at the screen to see the time or any missed calls or texts without having to press buttons first.

27-Oct-2008 08:23 AM
psychomania wrote:
Set it to white on black as this uses less power than black on white.
I think this is only true on OLED screens. LCD screens have the same power consumption regardless of what they're displaying since the brightness of a pixel is defined by the amplitude of an AC voltage across a cell with quasi-infinite resistance (i.e. which doesn't actually drain any current).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Power Saver Problems M30-344 (CPU only uses 600MHz)

Hi!
In my m30-344 are changed mainboard and display.
At this time i can't use the full 1.5ghz of the cpu!
In the Power Saver Profile i can choose only the cpu-rate 1-3! I have now de-installed this tool and reinstalled the version by the net. But i can only use 600mhz!
What can i do?
[Edited by: admin on 07-May-05 08:18]

Hi
Just need a little more help on this! I rang up pc world today and they had no idea what i was on about with the micro code. The guy kept saying its because i have no prossessor intensive apps running so it would run at 600mhz, he also said that cpuz is probably reporting the wrong cpu speed.
I know this cannot be the case as in the bios it is set to high which will mean it will run at 1600mhz all the time and not drop to 600mhz. I also ran a game in the background, while raring a 600mb file with 6 ie windows open to no avail just to proove to him that it wasnt goin to 1600! :-)
But he still didnt understand! So i need some light shed on what this micro code buisiness is all about because i have to explain to them exactly what the problem is. I need some info on this by tuesday so i can send it off with the laptop! Any help kindly recieved!
Regards
maki43

Toshiba Power saver may be the problem

My Satellite A665-S6050 has had all of the symptoms you read about in these forums;
crash, freeze, hung, locked, BSOD, Windows crash errors, etc.
I bought the laptop new a couple years ago and both love it and hate it when it exhibits
its freezing behavior. This is the intel I-3, 4 GB ram, Windows 7(64 bit) version. Really nice
when it's running normally.
I have watched and read through hundreds of posts throughout these forums since my purchase.
I have never sent the laptop back to Toshiba. Primarily because I've been able to force power off
then on, go to safe mode, schedule a disk scan on the next power up, reboots normally and I'm good
for who knows how long.
Following suggestions you can read in these forums, I have upgraded the Intel HD graphics display driver.
I install Windows updates every time they come available(auto update is enabled). I've updated the
Toshiba bios. I've updated Firefox every time it is available(my favorite browser). Updated java and
flash(again automatic updates). Some user settings that I've changed; I've disabled sleep mode(set it
to 'never' under 'advanced power settings) in every power scheme I have. I only use 'High Performance'
power scheme(plan). I have the setting for turning off the hard drive set to 'never'. My rational for doing
this is there is just too much going on under Windows 7, all the time. You never know what's running in the
background. Many times as the laptop freezes and or Windows tries it's best to recover, I get a strong feeling
that the hard drive has shut off! Especially, when Windows is trying to save a dump but can't because it can't
access hd0(hard drive)(I have to force power cycle off/on to recover).
This brings me to my current state of this troubleshooting saga. The last time the laptop froze, I was watching
streaming video in one Firefox window and had a slide show playing in another Firefox window(2 windows, not
2 tabs). Then in the lower right corner I get the Toshiba power saver notification that it is shutting down the
optical drive. It goes away on it's own in about 10 seconds. But immediately everything gets real slow until every
freezes. Windows tries to save a dump but can't. Windows tries to reboot itself but can't. Shows me a screen to
modify the boot list because the hd0 is not available. So, as so many times before I have to hold the power
button down for force power off. Wait a few, then power on, do my thing with safe mode, check disk, etc.
Power up and boots normally. Runs great for who knows how long. Right now as I type this, I have a audio CD
in my optical drive with Windows Media player set to 'replay' continuously. This I hope will prevent the 'Toshiba
power saver' from getting triggered because the optical drive is not idle and therefore won't shut off the hard
drive too! I have no idea how I can prove that 'Toshiba Power saver' is causing these freezes, crashes, lock ups,
etc. But at least if I can keep the optical drive in use and therefore prevent the 'power saver' from kicking in
maybe I can eliminate that as a possible cause of the freezes.
I am really disappointed to read so many Toshiba owners sending their computers to Toshiba service
hoping and praying for resolution but getting no satisfaction in the end. I love my Toshiba and I'll keep it.
I am a recreational user. Don't need to save power. When I use my computer, I want it to function as
powerful as possible until I intentionally perform a normal Windows shutdown.
My employer supplies me with a laptop (different brand). It has Intel I-5 chip, 3 GB ram Win XP Pro..
I run that computer full speed 9 -10 hours a day and I may have to reboot maybe once every other week.
Not bad considering the abuse I put it through. I would hate to have to rely on this Toshiba for work. I
don't think it could stay fully operational for that period of time.
Please Toshiba, tell me how I can help with the troubleshooting of this seriously pervasive problem on
so many of your computers. Is there an event log I can provide? Windows dump files(when they do get
saved)? Help me help you resolve this problem and satisfy hundreds of your customers.
Thank you in advance for your time.
Doug

Jerry,
It happened again this afternoon. This is the first time my system froze since the last time
I reported here in the forum. And just like I reported earlier, Toshiba Power Saver turned off
the optical drive power, I saw the pop-up in the lower right corner to notify me of the event.
I had Toshiba 'PC Health Monitor' running and minimized. I clicked on the icon to restore it
to the desktop. It displayed as expected. The hard drive graphic looked normal and spinning
as usual. I clicked on the graphic of the spinning hard drive and expected 'Power Options' to
display. Instead my desktop went away(all icons, system tray, system notification area, launch
pad, etc), everything gone. The graphic of the spinning hard drive stopped spinning. I tried a
CTL+ALT+DEL and got a new pop-up from Windows that it couldn't respond and I had 2 options;
press ESC or hold the power button down to force power and a shutdown. Which is what I eventually
did.
Powered up, went to safe mode, scheduled disk check on the next restart. Disk check runs and
finds no problem. System runs normally again.
As far as finding these events in the Windows logs using 'Event viewer', is not going to help.
I know exactly what time this all took place. I just can't find any event log showing that it took
place. There's a small gap in the time stamps just before the event until a few minutes after the
event. Then I see a mixture of 'errors' and 'information' events after the power on and restart
but nothing specifically addressing the hard drive before the restart.
I see an event log; "Previous shutdown was not expected". I'm sure that's not what your asking
to see. I don't know if it would be possible to trace the 'Toshiba Power Saver' but that may be
the only way I could prove my point that it is shutting off power to both the optical drive and
the hard drive at the same time.
Is there a way to disable or remove Toshiba Power Saver without causing a more serious problem?
Thank you in advance for your time and expertise.
Doug.

HT4623 Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

That's corrected, they save to your camera roll.

NB205-N210 Power Saver Problem

Hi!
Im haveing an error during install of the Power Saver software.
I have Win XP SP3 (Hungarian) and when I try to install the software, it gives me this message:
"1628: script based installation unsuccessful"
I read after this, and they say that "Idriver.exe" makes the error, I tryed to disable it but I cant,
Anyone can help me finding out how to install this vital part of software to my netbook, with out it the batter last only for about 3-4 hour (insted of 7-9)?
Thank you very much in foreward!

Microsofts Knowledge base suggests:
Method 10
If you get the message error "Error 1628: Failed to complete script based install"
And followed the instruction above and it didnt resolve the problem and you just create fresh
installation packet by using InstallShiled tool, please disable "Cache installation on local machine"
option during the installation packet create process.
Link http://support.microsoft.com/kb/555175
So maybe it has something to do with temporary files.
Go into c:\documents and settings\[your name]\Local Settings\Temp
and delete all the files in there (close all other programs first, or do it in Safe Mode).
Also try disabling your Antivirus software. They can sometimes block installations.

Nokia 5300 - Power Saver Problems

Hi!
I have a 5300 and sometimes my Power Saver mode does not work.
I'm sorry but I coudn't figure out the problem reprodution steps yet. All I can tell is that from a certain point beyond the power saver does not appear although it is activated. One way to correct this is to turn the phone off then on.
Is Nokia aware of this problem?
I found a similar post about another model, the suggested explanation resided on the operator's firmware, but in 5300's case the firmware is Nokia original...
Thank's.

I also tried formatting my memory card... that did not worrk either

N96 V30.033 Power Saver Problems

Hi there,
I've just recently updated my N96 to V30.033 and now the power saver does not seem to work properly.
I have an .swf animation set in the Power Saver options (power save timeout set to 30 secs). After 30 secs when it tries to go into power save, the animation comes up briefly, and then comes out of power save (back to the standby screen. or whatever screen you had open last).
It will just keep doing this in a loop.
It used to work on the last firmware, any ideas?
The only way to stop this is not to use an animation.
Thanks.

Binx:This is definitly one of the problems comin directly from the firmware, because it used to work for me before as well and now all of a sudden with this **bleep** firmware, we are back to triangle of worst firmwares (V10, V11, V30)............
Nokia N96-1 (RM-247)
Firmware version: 30.033
Made in Finland

Power Saver Problem

Recently when I start my computer, I get a message fatal error power saver. Any idea how I fix that? Thanks

Which computer? There is a label on the bottom?
What do you mean by "turns off"? One of these?
Hibernate VS Sleep VS Shut-Down
-Jerry

After upgrading from Vista to Windows 7, Firefox lost all my stored passwords, never asks to save them, even though I've checked box for saving them, have made sure history is not cleared, and am not in Private Browsing.

In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.

I have the TX2 1012NR and its can upgrade just fine! Here is a few recommendations "only if u have the HP Upgrade program disks"
If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS.... Just use the windows 7 upgrade disk and start the process. The clean install clears your entire drive but does not void your warranty! When you use the use me first disk after the install it actually loads everything else needed to get you up in running. The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site. Once again its recommended that if there were any programs installed delete them do not try to update them! This causes issues and countless errors. Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support. I found this was not the easy way to do it but the best way... I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only! Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed. I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7.... Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download...
http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
Microsoft Link for download:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa...

U2312HM and second monitor = Entering Power Save Mode

So, my monitor has not been able to turn on for about a week now. It shows that it's getting power, but after 3 seconds I get the message that it is going into power save mode. I am able to press some buttons on the monitor and a message pops up that there is no signal and to try typing or moving the mouse which doesn't work. I've attempted to change the input source which only leads to "No DisplayPort Cable - The display will go into Power Save Mode in 5 minutes.". I have tried a separate monitor which is extremely less powerful and I get the same message that it's entering power save mode. Could this be a fried video card or what's happening here?

Thanks for the reply Chris. I do have both DVI and VGA out ports and I will be testing that today. Not sure if this has anything to do with my issue or not but I might as well mention it. I have 4 2 GB ram sticks which came with my pc. I purchased two new 2 gb ram sticks due to some memory issues I was having. The problem is, the two new ram sticks I had were not the correct size but I attempted to use them anyway. Now prior to inserting these new ram sticks I cleaned my pc using air duster and a light suction vacuum cleaner, not sure if I got all of the dust. Once I found that the ram sticks were not the right size I then reinserted my older ram sticks and this is when the monitor issue occurred. A couple people had mentioned that this sounds like a bad video card, but could inserting wrong ram sticks affect the motherboard and in turn mess with the videocard?
Also, roughly 3 weeks prior to the monitor issue, the lights on the side of my case are generally dark blue (but can not confirm if this is normal as I rarely pay attention to it.) The only reason I bring this up is because the lights began to turn red, then a sortof clear light color progressively throughout the next couple of weeks, eventually not turning on at all. Again, I've never really noticed the lights on my pc to begin with so this could not mean a thing.

Dell monitors go into power save cycle

I got 2 brand new Dell P2412H monitors to use as a dual display. However when the computer puts the display to sleep they go into a "Entering Power Save Mode" cycle and the display never shuts off it stays blue and continues to do that. This happens with either display even in single monitor setup. I have the problem on my old Powermac G5 and now on my new apple mac mini. What is happening?
I have read about similar problems here but they were not solved:
http://en.community.dell.com/support-forums/peripherals/f/3529/t/19422779.aspx
http://en.community.dell.com/support-forums/peripherals/f/3529/t/19447579.aspx
http://en.community.dell.com/support-forums/peripherals/f/3529/p/19434910/200449 89.aspx
And this guy even made a youtube video of the same problem but different monitors:
http://www.youtube.com/watch?v=48EFXz6xIEU

I've tried a factory reset on the monitors. My monitors sleep settings are fine and they wake up from being asleep perfectly. As of this morning my little trick of unplugging them and swapping connections has stopped working. Now, when I swap cables the video card automatically assigns the primary video output to one of the monitors and keeps the other one asleep. very strange. So when I unplug the mini video adaptor from the dvi cord and then place that same cord in the native dvi output on the video card the card automatically reassigns the primary video output to that channel. So no matter how much witching I do I always end up with the system acting like I have a stretched desktop but with only the left display working while the right one is asleep. It's time to give apple support a call.

N79 Power Saver Theme Problem

Similar Messages

Maybe you are looking for