N82 Lcd Screen Problem After the Update (20.0.062)

Hi Everyone...
After i have updated the firmware of my phone to 20.0.062,
the LCD of it show red scratches... hmmm... very annoying when i view pictures and videos on my phone... How can i fix it? Please help me...

take it to a nokia repair center, remember to backup your phone before you take it.
Blackberry Bold

Similar Messages

  • Dual screen problems after last updates

    Hello everyone,
         it was long time since our Arch gave me some problems, but then now I'm fighting furiously with dual screen configuration with new gnome. Let me explain.
    I upgraded the home PC that I hadn't update for months, so I updated more or less everything ... kernel, nvidia drivers, gnome, etc..
    The PC has always been dual screen (no twin view, without xinerama), two screens (one on a LCD monitor and one on a TV) where I could run separate applications independent.
    Now, after the update, when I launch any application in the second screen (the TV) it starts on the first (screen).
    Obviously I have't made any changes to xorg.conf before and after the upgrade. I also tried to recreate one with the nvidia-tools but nothing ...
    Can you help me? Someone had the same problem?
    I post my xorg.conf, I hope that someone has a hint. I can no longer watching movies on TV and it is very annoying!
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder63) Wed Oct 1 15:10:25 PDT 2008
    # Auto-generated by Archie mkxcfg
    # Auto-generated by Archie mkxcfg
    #Section "DRI"
    # Mode 0666
    #EndSection
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 1024 0
    Screen 1 "Screen1" LeftOf "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    # Load "type1"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    # Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "it"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    # Warning: This may fry old Monitors
    # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Samsung SyncMaster"
    HorizSync 30.0 - 81.0
    VertRefresh 56.0 - 75.0
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
    ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
    ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
    ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
    ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
    ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
    ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
    ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
    ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
    ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
    ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
    ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
    ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
    ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
    ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
    ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
    ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
    ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Unknown"
    ModelName "TV-0"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Videocard1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 1
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7300 LE"
    BusID "PCI:4:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "metamodes" "CRT: 1280x1024 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "TV: nvidia-auto-select +0+0"
    Identifier "Screen1"
    Device "Device1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "TwinViewXineramaInfoOrder" "TV-0"
    Option "metamodes" "TV: 1024x768 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Writing the post a tried to install fluxbox, and then... all ok. In fluxbox all works fine. I think this is a problem related to the new gnome screen configurer.
    I post an image of gnome screen configurer vs nvidia-tools.
    Googling around I found that new gnome screen configuration (using xrandr) is not compatible with nvidia drivers. Could be this the source of the problem?
    Help please
    Last edited by frullino (2008-10-25 13:17:29)

    Hi,
    Does your Mac go to the sleep status when you close the cover? If so, the remote session can be terminated due to time out and the time out value may be redesigned in the latest versions.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Problems after the update.

    After the update my wi-fi doesnt work, and several apps are closing down just after starting them, please help

    Looks like the apple shops are going to be busy this weekend
    Best thing you can do is book it in and go to the shop and complain. Ask them to sort it for you and don't take no for an answer

  • Nokia 5800 Screen Problems After Firmware Update V...

    Hi all,
    I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
    Heres what I've done to resolve the problem:
    - remove the battery, memory and sim cards for a few hours.
    - reboot the phone without the memory card(eliminating any corrupt setup files).
    - reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
    - tried running the updates on all XP, Vista and Windows 7.
    Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
    Thank you all for your help.

    There is another way to hard reset your phone and it is as follows.
    With your phone powered off, press and hold Green  + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
    Always remember to backup your phone before performing resets as your data may be lost.
    This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

  • Javascript problems after the update

    Ever since the latest software update on my Galaxy S3, I've been having problems with my internet.  I keep getting a message that I need to turn on JavaScript, but I already have JavaScript enabled in my browser.  I go into the settings, and then click advanced, and the box next to "Turn on JavaScript" has a check mark in it, and yet I can't do diddly squat on the internet.  This seems to be a sporadic problem.  One second everything will be working fine, and then all of the sudden I can't access any sites.  I Come back the next day and it's fine. For a little while, and then suddenly I'll get the message again.  Even if I'm on the internet and get the message and hit the back button to go to what I was just viewing, it suddenly won't be able to load.  Soooooo irritating!!  Anyone know how to fix this problem?

        I want to ensure you have a positive experience with your S3. What I would suggest is clearing data and cache from the browser. You may complete this by heading into Settings > Applications > Manage Apps > All > Browser -- Clear Data and Cache.
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • Is there a solution already for the "wifi greyed out button" problem after the update to ios7?

    Apple Techies HELP!!!!!

    Hi there mctreve,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    -Griff W.

  • Home screen wallpaper after the update? HELP

    I can't set my wallpaper to my homescreen, is this something we can't do as owners of the 3g?

    you don't get this feature with the 3G, only the 3GS and later...

  • HT201109 My shape mask is starting off screen (too far for me even to grab) and I was wondering if anyone knows how to get it back. Happened after the update to 10.1.1

    After updating to FCPX 10.1.1 my shape mask starts waaaay off screen. Too far for me even to grab the center fully zoomed out. My friends mac had the same problem after the update. Anyone have an idea on what to do? Thanks

    Make an appointment at the genius bar of your local Qpple Store. An out of warranty replacement will cost you $269.

  • Multiple Samsung Stratosphere problems after FF1 update

    There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update.  Some were replys to older posts and some only touched on a single issue.  I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
    For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
    Summary:  Verizon and Samsung have finally updated the Stratosphere almost 1 year after release.  This updated the phone from Android 2.3.5 to Android 2.3.6.  Going by filename, this is known as the FF1 update.   This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
    There were some noticable changes in this update:
    -Lock screen has changed.  The puzzle piece and glass lock options have been removed.  New options have been added, such as facial recognition unlock.
    -Call answering screen has changed, introducing the option to ignore call with a message.
    -Camera now has digital zoom ability.
    -Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
    -Phone icon has changed ever so slightly
    -Wifi icon now included up and down arrows to indicate data is being sent or recieved
    -Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
    -The visual voicemail app has been improved (I have personally not used this feature)
    -Callback number is now supported in text / picture messages
    -Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
    -Update to how the device deals with the end of scrolling.  It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll.  (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
    -(I am sure there are more.  please list any others you may have noticed)
    I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
    -The biggest problem is with wifi connectivity.  Upon an initial connection to wifi, everything works great.  After somewhere between 15minutes and 2 hours, problems start happening.  Its as if the wifi keeps hanging or reconnecting.  Download speeds (tested with the SpeedTest.com app) slow to about one third of normal.  Apps like Facebook that require a constant connection will just time out.
    -It appears the signal strength for 3g and 4g connections is lower.  There are places where I used to get a 4g connection, and now I only get 3g.  Some palces I fall back to just 2g digital.
    Another minor issue i found was with text messages.  When you reply to a message, it no longer automatically focuses the text in the input box.  You have to first click into the box to start typing.  Not a huge deal, but one more step to take over and over.  Minor annoyence.
    At my house, I struggle to get a 3g or 4g signal.  I depend on wifi for my data connection.  So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home.  Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
    -Complete factory reset on my phone.  (did not help)
    -Pull battery and SIM card out of phone for 15 minutes.  (did not help)
    -Went to a Verizon store.  The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update.  He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
    -I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP.  Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address.  Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this.  I have a NetGear N900 router, and I can not change teh DHCP lease time.  It appears, however, that my router is not sending out "forever" leases.  But just to make sure, I gave my phone a static IP.  (None of these steps made any difference).
    The only thing that temporarily fixes the problem is a reboot of the phone.  This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
    I have now had this update for over a week, and on 2 phones.  I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
    I am asking Verizon or Samsung to at least confirm this issue if possible.  Maybe there are newer revs of the Stratopshere hardware that don't have this problem.  Or there is something unique about my (and apparently others) situation.  But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
    I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
    I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
    Thank you for your time.

    Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
    I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
    UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
    One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
    Message was updated by David Rensberger

  • I tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?

    i have tried updating my iphone to a newer version but after the update was completed the phone is not  restarting, just the apple logo is showing up on the screen. what is causing that problem?

    Re: i tried updating my iphone to a new verison but after the update the phone is not restarting, just the apple sign is showing up on the screen. what is the problem?
    I have tried the above fix and iTunes crashes giving error 27 after trying to load the iPhone firmware.
    I have booted my phone in DFU mode and this has made no difference.
    My mac is up to date.
    My iTunes is up to date.
    All i tried to do was update my ios as i have been unable to make calls or send text's all day.
    Do you have any other suggestions as my phone is no good to me now.
    Many thanks,
    Lyd_v

  • Hello, I am holding a Iphone 4. I have serious problems for the update of the IOS software 5. in fact this new software will not install. after several attempts, I have error messages 1602, 1604, 2009 ... Suddenly, the screen of my phone is stuck with the

    ****, I am holding a Iphone 4. I have serious problems for the update of the IOS 5 which will not install. atfer several attemps, ihave error messages 1602, 1604, 2009.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • I was updating my ipod touch to iso 6.1 ans when it restarted after the update it froze and i held the lock button and home button down to restart it and it goes to random colour screens

    I was updating my ipod touch  to iso 6.1 (i think) and when my ipod restarted after the update it froze on the loading bar so i held the lock and home buttons down to restart my ipod it showed the apple logo for a few seconds then the screen went random colours.  I tried to let the battery drain  then plug it into the computer but it doesen't recognize it when i connect it.
    Please help!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Bluetooth Problems after IOS7 Update (on screen album art gone)

    Before updateing my Iphone with IOS7 my bluetooth connection in my 2013 Toyota Tacoma was flawless. Now after the update i am having problems and would like to see if someone has any suggestions for me to clear this up.
    Before the update i would get my album art or general art from where i was or what i was listening to on my head unit in my truck. ie: if i was listening to a song... the album it was on would appear on my screen... or if i was listneing to sirius via my phone and bluetooth... i would get the sirius logo or channel logo on the screen just to the left of the song or channel details.
    now after the update all i am getting in the small box is the blue tooth logo... that is it... what happened?
    i have tried the unpairing and the repairing... but nothing workes... can anyone help me?
    Thanks!
    James

    I finally had to restore iOS 8 on my iPhone, and then I restored from my backup.  Everything is fixed now.  All music synced without issue, and iTunes even seemed more stable while syncing. I guess iOS 8 didn't install correctly the first time.
    My iPhone seems to be running better now too.
    I'd recommend reinstalling iOS 8, if you're having trouble.  It fixed all of my problems, hopefully it can fix yours too.

  • Dear Apple Support,  Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..  After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to resto

    Dear Apple Support,
    Good day to you.
    This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
    After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
    After restoring it my ipad is now opening and it is like new that i need to set up again.
    I set up again until i reach the apple id and password.
    I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
    What will I do? Please help.
    Thank you
    Sent from my iPhone
    Begin forwarded message:
    From: Apple <[email protected]***>
    Date: October 9, 2013 at 11:53:53 PM GMT+4
    To: ****
    Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini 
    Dear Leslie J.,
    Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
    If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
    Apple Support
    <Email Edited By Host>

    1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
    2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
    Is your iPad working?

  • I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

    i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

    I have the same problem.  After updating to 6.1.2 my iPad 3,2 will not find Verizon network.  It just says "Searching..." for ever.  Any thoughts?

Maybe you are looking for

  • Java does not list any sites in the site exception list, just an exclamation mark, so how do I add them?

    I want to use an online drum machine ("monkey machine") that requires Java, so I installed Java, apparently correctly. However, when I try to use the monkey machine drummer, it still demands Java, but Java's security mechanism won't allow me to add t

  • Weblogic 10.0 Problems with stripes/struts

    When trying to deploy the sample application for the stripes framework on weblogic 10.0 I get the following error when deploying. <Dec 3, 2009 12:16:51 PM CET> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: net.sourceforg

  • Bi Publisher tab not appearing under Excel 2010

    Hi, We have a problem with my team when trying to use BI Publisher in Excel. We use Microsoft Office 2010 under Windows 7 configuration. It is working fine with Word : we use it often and the installation worked fine. The tab in Word appeared at firs

  • Dashboard pages

    Hi, My dashboard page has 3 section the first section has yearly prompt,yearly report second section has monthly prompt ,monthly report third has daily prompt and report when i click on my dashboard only first section should be visible that is yearly

  • How to reterive the droped user?

    Hi I have dropped the user, example xyz. This user contains the lot of tables. Now i want to reterive the user with all the tables. Please help me. Thanks in advance. Regards Sathya