N95-1 V30 Bugs & Issues

Let's discuss the bugs and issues with the new V30 firmware.
What I don't like about V30 are that
1- when the N95 starts, the standby screen goes blank for less than a second for once.
2- There are now too many applications installed on the phone (if you check the Application Manager you will see the list) occupying the memory.
3- Also after updating from V21, V30 crashed when using bluetooth. Seemed like it had problems with bluetooth. The crash was bad that you could only restart the phone by taking out the battery. After 3 re-installs now the bluetooth works fine.

Did anyone see any difference at the Sound ?
The sound at the music player seems lower quality now.
I have tried to restore to defaults and change the equalizer settings again but the sound is just Cr@ppy.
Its seems like the sound is being compressed, especially in the high volume and even more at the bass parts as expected.
Its like the sound is being struggled, more mid and some high but not real voice and clarity.
It reminds me some cheap Chinese mp3 player.
I had the V23 and the sound was crystal clear and
balanced.
If this is the price that I have to pay for some more minutes of music as the Nokia say for this Upgrade then I prefer to hear the half and have some descent quality.
I just hope that they ll fix this in some newer version and that they are not doing this just to make the Music versions look better in sound.
Message Edited by blastar on 04-Oct-2008 08:11 AM

Similar Messages

  • N95-1 V30 bugs :(

    Hi all! Dunno if it was discussed before, but here is my list of bugs that I got in new V30 firmware on my N95-1:
    1) Web browser crashes when visiting YouTube and some "big" sites (more than 1mb), that's annoying
    2) Nokia Maps 2.0 crashes sometime(specially when i get connection from satellite)
    3) Small bug in Music Player - for example you added 4 songs to memory card and after what you pressed "Refresh" button it shows you that was added 1 song (when you added more than 1).
    4) Sometime when closing camera, camera app. don't close properly (black screen, press red button and it exit)
    5) Barcode reader crashes sometime
    I got N95-1 with 4gb memory card. FW- 30.0.015
    On phone I didn't installed 3rd party soft that may cause this crashes. Please help me to fix it. Thanks!

    I've noticed 4 out of 5 of those problems.
    1) is more to do with the hardware, specifically the amount of SDRAM in the phone. There isn't really enough to process large web pages.
    2) is one I'd never noticed because I tended to use google maps rather than Nokia maps on my N95.
    3) seen it too. In fact, if you add a whole load of tracks, for each track it counts while refreshing the library, it does in fact detect 10 of them.
    4) this sometimes happens if you're doing something else at the time or if other applications are open. As you say, it's easily solved by pressing the red button.
    5) I've seen this with barcodes that are difficult to read.
    All but 1) could really be considered bugs. What I don't know is if there will be any more updates for the N95 series of phones at this point in their life. They've been around for a while and Nokia is more likely to be concentrating on newer models nowadays.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Wifi Bug issues

    I suspected there is a software bug issues with the Wifi once you first install the Windows 10 Preview Technical Enterprise.

    Hi
    Can you explain more please?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Nokia n95 FW 30 bug!! please help

    hi. i just updated my noikia n95-1 to fw 30 and there is a bug. the phone shuts down spontaneously. It happens usually after i connect it to the computer and transfer files. i set it to charge when i sleep and when i wake up its no longer on... please help.

    I think my phone is a lemon - it has powered off on its own since fresh out of the box. It does this occasionally when I slide open the keyboard -especially annoying when trying to answer the phone. It also shuts down on for no reason, I reach to make a call, check if I missed a call to find it is off. The mystery is that it still has battery life so that is not the issue.
    Is there an upgrade that would fix this? Everyone says the N95 is such a great phone but mine has been a nightmare!

  • Nokia N95 UK V30

    hey guys anyone got the V30 Firmware for the nokia n95-1 ???
    im only asking cause i just got it for my handset and im wondering if there are any bugs in it ?
    thanks for any info
    and by the way
    whats new ??
    Nokia N95 v31.0.017 16GB Nokia N91 4GB Nokia N80 2GB Sony Ericsson W850i 4GB

    well guys ive noticed a bug with the v30 firmware it makes my phone constantly vibrate sometimes and the only way i can stop that is if i turn the phone off and back on
    witch sucks
    as i thought by now nokia would have got it right
    is there anyway i can go back to v21 ?
    Nokia N95 v31.0.017 16GB Nokia N91 4GB Nokia N80 2GB Sony Ericsson W850i 4GB

  • How can I tell that it is a hardware issue or ios bug issue with Iphone 4S Battery life & flapping 3G?

    Hi There,
    My Battery dies real quick on 4S compared to 4 eventhough my wireless is off, location services are off, the only thing on is the cellular data. I even adjusted the brightness to 60%.
    Another issue is that My 3G connection keeps flapping, goes & comes in a wierd way where it falls back to Edge.
    Am I to consider this part of the issues i can see so many people facing & therefore consider as ios bug & wait for the update or should I take it over to a service center to check the phone for me which means waste of time to get it done.
    Kindly advise from your experience

    It's almost always a software issue. Actual hardware problems are rare but can get very serious, if you recall the antenna issue last year.
    Reception problems just depend on how strong the signals are at your location. But if you're dropping to Edge even in strong areas, it wouldn't hurt to have an apple store look at it.

  • N95 + One Touch Access issue on Windows Vista Busi...

    Hi all,
    I searched for a solution to this issue both in this forum and in the Nokia PC Suite help but I couldn't find any.
    I'm able to use Nokia PC Suite with my N95 + cable DKE-2 except for One Touch Access.
    When I clic on "Connect to the Internet" I get the following error message pop up:
    "You do not have sufficient privileges to modify the connection properties. Only Administrators can create and modify connections."
    The funny thing is that I am an Admnistrator of my notebook (I don't know how many times I checked it from the Advanced User Accounts Control Panel).
    If I clic "Ok" I get the One Touch Access window with the following message:
    "There are no Nokia modems installed. Please make sure you have installed Nokia Connectivity Cable driver software."
    And below the picture of the notebook and the base station:
    "No modem found!"
    But if I check in the Device Manager (Control Panel) list I find "Nokia N95 USB Modem #2".
    Moreover, as far as I understood, the cable driver is automatically installed with the Nokia PC Suite and I shouldn't reinstall it: http://europe.nokia.com/A4144937.
    This is the System Information I get from the Help > About > System Info command:
    Operating system:
    Microsoft Windows Vista
    Build 6000
    No service pack installed
    Language: English (United States)
    Language for non-Unicode programs: English (United States)
    Locale: Italian (Standard)
    Input language: Italian (Standard)
    Nokia PC Suite:
    Version 6.81.13.0
    Language: English
    Connectivity Cable Drivers:
    Microsoft Outlook:
    Version 12.0
    Build 5000
    Bluetooth stack:
    Microsoft Bluetooth stack
    Version 6.0.6000.16386
    This is the log of the "Query Modem" command (Device Manager > Properties > Diagnostics):
    ATQ0V1E0 - OK
    AT+GMM - Nokia N95
    AT+FCLASS=? - 0
    AT#CLS=? - COMMAND NOT SUPPORTED
    AT+GCI? - COMMAND NOT SUPPORTED
    AT+GCI=? - COMMAND NOT SUPPORTED
    ATI1 - 356962013384111
    ATI2 - V 06wk41v31
    05-06-07
    RM-159
    (c) Nokia
    ATI3 - Nokia N95
    ATI4 - 2006_wk41_v26
    ATI5 - OK
    ATI6 - OK
    ATI7 - OK
    The modem driver is updated: version 6.84.0.0, date 21/06/2007.
    The Nokia N95 software is updated: version 12.0.013.
    Any help is very appreciated!
    Michele
    Thank you,
    Michele

    I've had the same problem but it was not solved by installing PC Suite 6.84 (as this failed to install), however this is how I got around it.
    Find the "OneTouchAccess.exe" program. It should be in C:/Program Files/Nokia/Nokia PC Suite 6/. Right-click the "OneTouchAccess.exe" program icon and go to ‘Properties’, then click the ‘Compatibility’ tab. Under ‘Privilege Level’, select ‘Run this program as administrator’ and click ‘OK’.
    Then when "PC Suite" tries to launch "OneTouchAccess.exe" via the "Connect to the Internet" icon, it does so with the right privilieges.
    (Any body know why PC Suite 6.84 would not install on my Acer notebook running Windows Vista V6.0 Build 6000?)

  • Help: Collaboration Room Bugs/Issues

    Hi,
    I have created my own collaboration room template by duplicating the standard Information Site template.
    However, i am facing a few issues related to collaboration room creation, which might be standard features/bugs in collaboration room.
    1. When i create a new Room, all the users of that room (members as well as administrators) get full access to room documents, headers, news, Faqs etc.
    The permissions started working fine when i changed permissions in KM Content --> Room_Extensions.
    All the existing rooms showed the correct permissions.
    However, whenever i create a new room, every user gets full permissions to all the parts of the room.
    This is despite the fact that i have removed all the users from full permissions to the room_extensions folder in KM and reset the child permissions.
    2. I have attached the iView com.sap.ip.collaboration/TemplateContent/Homer/iViews/ com.sap.netweaver.coll.RoomMemberList (Team Members iView)to my room template.
    When i create a new room based on my template, i do not get the users specific to a particular room.
    What i get in the Team members list is all the users listed in the Contacts list in Collaboration Launch Pad.
    3. When i try to preview some of the iViews stored in com.sap.ip.collaboration/TemplateContent/Homer, i get an exception. On attaching these iViews to the Collaboration Rooms, i get a message stating "Invalid Item ID" index.xml.
    I get the same message even after attaching these iViews to a collaboration room template and creating a room based on the template.
    Any help regarding these issues would be highly appreciated. Full points for helping me with these issues.
    Regards,
    Vibhu

    Hi Vibhu,
    here my comments:
    1) These are the standard settings (every room member gets full access) for the permissions of KM content created during a Room creation. Since KM can't distinguish between the room roles, we can't set 'better/stronger' permissions. You can only set manually permissions on concrete users.
    2) It seems that you have not set the mappings for this iView. For the RoomMemberList you need the following settings:
    StartURI        room_rootrolegroup_rid
    path            room_rootrolegroup_rid
    roomrid         roomid
    in the documentation you find more mappings for iViews delivered by SAP, which You have to set in the templates.
    Please see http://help.sap.com/saphelp_nw04/helpdata/en/3f/fcfe06fd7f1321e10000000a114cbd/content.htm for more information.
    3) That's possible since some of the iViews needs certain iView-Parameters set to work properly. Please check if this iView needs some mappings under the link in the documentation under 2)
    4) Up to now we are treating groups as you described. We are working on a solution where we work with groups as room members and we don't resolve the members of the invited/added group.
    Regards, Erwin

  • N95 Mass storage connection issue.

    I have a strange problem with my N95. When I connect to my PC Vista cannot install the drivers for the mass storage/data transfer application. The drivers for PC suite, media player and image print work fine, but it appears that the drivers for Mass Storage are not on the CD.
    I decided to upgrade my firmware to attempt to solve the problem, but when using Nokia Software Updater, the program stalls at the detecting device stage (step 2/3).
    Can anyone help? As without the ability to connect the phone as a mass storage device, I cannot use Nokia Map Loader (again it will not detect my phone - despite PC suite detecting it fine)

    i also have the same problem, but wonder why no one has replied a solution to this issue. as you describe exact same problem. if anything ive found with this phone so far, its a NIGHTMARE.
    there was definatly a problem with the firmware when it was first shipped, after this was updated fixed some things, but the WLAN wouldnt work and needed alot of research online to fix it, nokia support to note didnt have a clue. The problem i had was due to setting the aerial to always on, and not power saving. Anyway if someone has an answer as to why the mass storage driver wont install and so i can put the nokia maps on the phome, it would be much appreciated.

  • How to "Fix" the 50% dreaded bug issue on almost all  android devices.

    I made a post about LG Ally having this issue a few days ago and I've done heavy research on this issue since then and found that pretty much all 2.1 devices have this issue. Yes google is aware of it and I've seen topics where verizon and htc said that they were aware of it too and all 3 companies are working to fix it and push an update. I tested a "fix" to this issue and it seems to work. I don't know if it's permanent but so far my Ally is not showing this issue so let's get to fixing. 
    Here's the link to my LG Ally topic it has another fix there too:
    http://forums.verizon.com/t5/Android-Devices/Why-your-LG-Ally-has-horrible-battery-life/td-p/210036
    How to find out if your android device has this:
    --Go to [Settings>About Phone>Battery Use>Cell Standby (if you don't have cell standby in there than you don't have this issue, but if you do doesn't mean you have it, keep reading)>if your time without service is above 50% than you have the bug.]
    The fix that I've been testing:
    --Open dial pad and dial *#*#4636#*#* (If Testing menu doesn't come up than click "Call" and it will come up)>Go to Phone information>Scroll down and you'll see preferred network type>click it and switch it to GSM/CDMA auto (PRL)
    Now your issues should start going away and the time without service will slowly start decreasing. For the first few hours my time without service stayed at about 11% but than dropped to 0% in 24 hours.... You might need to do that step a few times before your phone makes that option a default one. Your phone might try to change preferred network type so check it every 2-3 hours on the first day.

    Which method.  I would imagine the airplane mode is a temporary fix.  Something about it resets the radio apparently.  With the *#*#4636#*#* method you need to keep checking it.  I have 2 issues with it though.  First it does take several attempts before the change sticks.  Second since there appears to be no GSM radio I can't see why this is an advantage at all. 
    I have searched and searched for anything that would explain why this is there and why I can select it on my Incredible but not on my Dad's Moto DROID.  Is it possible that the Incredible does have a GSM radio?  I can't select a band it force closes on me so I have to assume it doesn't however if you change it to CDMA/GSM AUTO and ping it apparently it does seem to find GSM signals.  That is intriguing and a little disturbing.  Intriguing because if it is there and inactive then there is a way to activate it and in theory you could use the phone on any network.  Disturbing because there is no mention of it anywhere and no way to choose a band.  That disturbs me as well because the choosing the band thing, which I could do on my dad's Moto Droid had options for Wimax, several versions of CDMA and all the current itterations of GSM including the new TMobile signal.  How cool would it be if you could unlock GSM on this phone and use it on literally any network.  I guess it doesn't matter the main advantage we have is the network but if the phone is completely unlockable it makes it that much more valuable. 

  • Please update to 4.4.2 to get rid of the share bug issue

    The share bug has been present since Dec and 4.4.2 fixes this issue. Why is it taking so long to release this update?

    Im talking 4.4.2 not 4.4.  https://www.google.com/search?q=4.4+share+bug&oq=4.4+share+bug&aqs=chrome..69i57.4331j0j7&sourceid=chrome&es_sm=122&ie=U…

  • Merged clips and modified audio channels bug/issue

    My problem is that if I create a merged clip and modify it's audio channels Premiere (both CC and CC2014) does not respect the modification under specific circumstances. These circumstances are: if I use keyboard shortcuts or the source window buttons for overwrite/insert to cut the merged clip into a timeline. However, if I drag & drop the clip from the source window or from a bin into the timeline Premiere will respect the audio channels set through modify audio channels.
    Here are steps needed to create my problem. You will need a video clip and an audio clip with at least two channels to reproduce this.
    1. Create a merged clip from the video and audio. Does not matter if you have "Remove audio from AV clip" enabled or not.
    2. Right click on the merged clip in the bin and select Modify -> Audio Channels.
    3. Set the merged clip's audio channels to Number of Audio Tracks: 1, Channel Format: Mono. Set the source channel for Audio 1 to anything except Channel 1. Click OK.
    4. Make sure you have the merged clip open in the source monitor. Use keyboard shortcuts (. or ,) or the insert/overwrite buttons in the source monitor to cut the clip into a sequence.
    5. The merged clip in the sequence will use channel 1 for audio, even though it has been set to use another channel.
    6. Now try drag & dropping the merged clip from either the source monitor or from a bin into the sequence. It will now use the audio channel that has been set through modify audio channels.
    My workaround is to use drag & drop for now for affected clips, but in the long run this is a pain in the backside.
    My question is if this is something that affects other users as well. And while I'm waiting for a fix, if anyone has any suggestions on how to get modified audio channels to work properly, I will gladly listen.
    I have filed a bug report for this. I have reproduced this on multiple Windows 7 machines with Premiere Pro CC and on two Macs with both CC and CC 2014.
    EDIT to add: I have been in discussion with Rameez from Adobe about this through the support chat and have been told that this is working as intended. He suggested I post a thread about it to see how other editors feel about the functionality. I personally feel that the way it works now makes no sense at all. If others feel the same way, maybe this issue can be fixed in a future update. So please make your voice heard.
    EDIT to add: In most usage this might not be an issue at all. But if for example you have external audio on multiple channels and to make sure you have a clean timeline, you wish to remove extra tracks from your merged clips and those extra tracks happen to be any track before the last one(s), you will find that editing the merged clip in in any other way than drag & dropping it in the sequence will result in you losing those last tracks instead of any tracks in the middle that you have disable through modify audio channels. I would think that the audio channel modifications should work no matter what way you cut the merged clip in.
    Message was edited by: Jaakko Rinne

    Going to try, but here is my workflow and have not encountered any problems until this last P/U days footage.  I've been doing things this way because I found having all files in the project was causing it to crash constantly when I was working.  I have a new I7' processor IMac with 24 gigs of RAM.  And since Premiere does not allow you to have multiple projects open at the same time (Wish this would change.  Avid and FCP both allowed multiple projects) I have to do things this way.
    Pre-workflow Project File
    Label all Video and Audio files to match Scene #'/Takes
    Set in points on all video and audio to reflect slate
    Merge Clips
    Working Project File
    Import only Merged Clips into Project.  Either via import or copy/paste
    Now I've done this workflow from just about the very beginning.  Deleting all of the original source video and all audio clips from my working project so only my bins containing my merged clips remain.  Have had no problems and edit has been smooth.  Did a pickup day last week, followed same steps as I've done in the past, imported the merged clips into my working project and the clips have the audio set to none by default.  Now once I go into the sequence I can manually set it and it's there but I cannot play audio in the source monitor which is how I edit, there's no reason I should have to go back to the crappy FCP way of editing doing the copy and paste from a sequence.

  • Photoshop CS5 export layer comps bug / issue

    I'm experiencing a problem with CS5 that didn't happen in CS4. For some weird reason, when I use the export layer comps script, it won't let me choose a destination for the jpgs that is the macintosh HD. It will only work if I export to an external drive. The error message I get is 'destination does not exist'
    I am on snow leopard and have repaired my permissions. For now I get around the problem by exporting to an external drive, but this seems like a weird issue.
    Any ideas?
    Thanks,
    Tom

    my setup is very easy,
    go > connect to server
    choose the SMB share > connect
    select the volumes that you want...
    I had mounted the volume by placing it into my login startup but since the problem with PS I have removed this ( the good news is that this is how I was able to find this bug). Either way, via the login startup item or the method above creates the problem.
    If you follow the link below to locate the user "speeves1" he has much more insight into the Windows thing than I do, I'm just a rule follower when it comes to networking windows computers.
    http://forums.adobe.com/message/3104027#3104027
    > I can't share specifics of what we have planned, but we are looking into these issues.
    I understand you can't announce future things, no problem. Because of an earlier conversation about Adobe restricted to adding new features after the first quarter of a release, I was curious if the same rulings committee (FASB) has any guidelines for bug fixes. CS4 had one fix within the first quarter and the second patch came after the product cycle ended and CS5 shipped. In general is there any restriction to releasing patches/fixes after the first quarter?
    thanks.

  • Palm Pre - Email and Other Bugs/Issues For Future Updates

    Great phone overall, and glad to see there is a support community.  Couple things I noticed that I wondered if other users know of fixes to: 
    - All emails lose line breaks, in that all previous replies are smooshed into one long run on sentence including title block
    - Email notifications don't disappear when action is taken on PC
    - Be able to delete emails and contacts from the phone without deleting from PC
    Other issues not e-mail related, but not sure which forum to post under: 
    - Cut and paste shortcuts with launcher button don't work (which is why I had to retype all this)
    - Cut and paste doesn't work on text you didn't type such as web content
    - Add URL entry box to browser menu, or a button for it directly on screen (similar to back button)
    - Alarm clock set for weekdays doesn't shut off on weekend
    - Snooze and dismiss buttons should be moved further apart
    - Alarm clock made part of online backup (late for work the next day when I exchanged my phone)
    And most importantly:
    - Use cattle prod to get Adobe to release FREE Flash plugin app for browser and make sure to beat Apple to it!
    Post relates to: Pre p100eww (Sprint)
    Message Edited by kx250ryder on 06-16-2009 09:01 AM

    #1 should be to fix the "Next Sync in 0 Minutes" bug with the email. I have the issue and tried everything under the sun so far to fix it. I'll be calling palm tomorrow to see what they can do, however in my research I have found dozens of people posting this issue online, and there are only temporary fixes that work for one sync.

  • N95 Calendar Sync Bug found

    I have recently come across an issue with the Nokia N95, we have just bought over 20 of these for executive staff at my company, as the IT support officer I have been called out to nearly every one of these new phones to fix a problem. The issue is that when you add a reoccurring meeting request within Outlook and sync it to the N95 it copies across correctly, however if you remove one of the meetings but keep the series it will delete the one meeting from Outlook but not from the calendar on the N95 on next sync, this is obviously a big issue, when the directors PA removes a meeting from the reoccurring series it leaves the appointment in the phone, it seems that even after deleting it the phone only looks at the date range for the reoccurring meeting and places a meeting on each of the days specified in there no matter what, even when the single meeting is removed manually from the phone when it runs sync the next time the meeting comes back again, even though it is not on the device or Outlook. I have been through all the advanced settings within the Nokia PC Suite Software and also active sync and still nothing has helped. When I phoned Nokia Support I was told that the only way to fix this issue was to change the sync setting from both ways to one way only, but this is not good enough as the director and executives need to make appointments when out of the office and have it read back to the computer when they sync. Personally I have a HTC phone that I tested this same issue on and the problem does not exist on this phone. Does anyone have any ideas on how to fix this? We are now looking in to more new phones away from Nokia, it would make us happy to find a fix rather than purchasing all new phones for every executive!

    This is still a problem in iOS 7.0.4 as well.  We just had runaway calendar sync behavior on a 4th generation iPad running iOS 7.0.4 (iPad3C4/1102.55400001), which connected 75,436 times in a single 24-hour day.

Maybe you are looking for