N97 Mini Map Loader using Mac OS X failed to load ...

Nokia N97 Mini
S/W v 12.0.110
Nokia Maps Loader 1.0 (770) on Mac OS X 10.6.4
I'm trying to load map for INDIA (121.1 MB). While in progress, the software shows me a message "52f40.cdt: File couldn't be uploaded. The file or folder might be in use"
I repeated the sequence many times but it eventually fails.
Any help appreciated.
F

Same problem with downloading nokia maps for India.
Phone NOKIA 5800
Mac OSX 10.5.8
After quite a few minutes of downloading (seems so)
Error message appears: 55f69.cdt File could not be uploaded. The file or folder might be in use.
Please help.....

Similar Messages

N97 mini maps problem !

hi all, i have a n97 mini and i hard formated it then i loaded all software now i can't enter my maps, after i open, it s closing in 1-2 seconds i don't understand what's going on :/ pls help help help me

@behzatkara
Welcome to the forum!
Regrettably neither of the two previous posts appear to address your issue with one under the misapprehension that you are using N97 where phone memory is certainly a problem instead of N97 Mini in question.
It is more likely here that you have corrupt map data, which is the commonest cause of OVI Maps crashing upon opening! When you updated OVI Maps application to latest v3.06 it needs to delete previous 0.1.25.114 map data used by v3.04 to make way for 0.2.42.122 map set. Whilst there is a message saying that old map data will need to be removed, it requires confirmation by the user.
Suggest that you try deleting E:\Cities + .qf file, re-start OVI Maps application upon device to re-initialise application and re-create necessary folder structure. You now have option of downloading regional maps using either "Update" feature within application upon device via WLAN access point or use OVI Suite > Maps as previously if so preferred.
Happy to have helped forum with a Support Ratio = 42.5

Problems using JAXB in windows(Failed to load Main-Class manifest)

Friends,
I am trying to use JAXB in windows environment. I have already included rt and xjc jar files in my system classpath.
I have sucessfully created java files using the xjc compiler(without the xjs map file). They rock!!
But I am facing problems while creating .xjs file from my dtd. I tried looking into previously discussed topics, with no help. :(
my command line:
java -jar C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar mySchemaFile.dtd
This is what i get :
Failed to load Main-Class manifest attribute from
C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar
Please help, if you have come across this or similar issue..
Or let me know how you create a .xjs file.
Any idea what is the main file class in jaxb-rt-1.0-ea.jar that creates a xjs file ?
All/any help appreciated. Thanks in advance.

Hi,
You cannot use xjs files with the JAXB Beta RI.
This has been mentioned at http://java.sun.com/xml/jaxb
"Note that this version is not API-level compatible with the previous released version of the specification and DTD schemas are no longer supported."
You can generate code using the xjc binding compiler for schema documents.
Pls let me know if you have more questions
Thanks,
Bhakti
Friends,
I am trying to use JAXB in windows environment. I have
already included rt and xjc jar files in my system
classpath.
I have sucessfully created java files using the xjc
compiler(without the xjs map file). They rock!!
But I am facing problems while creating .xjs file from
my dtd. I tried looking into previously discussed
topics, with no help. :(
my command line:
java -jar C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar
mySchemaFile.dtd
This is what i get :
Failed to load Main-Class manifest attribute from
C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar
Please help, if you have come across this or similar
issue..
Or let me know how you create a .xjs file.
Any idea what is the main file class in
jaxb-rt-1.0-ea.jar that creates a xjs file ?
All/any help appreciated. Thanks in advance.

TS1702 I am having trouble opening the Times and Sunday Times Newspaper App in my iPad Newstand. Each time I seek to load I get the message "Failed to load the Kiosk".

I have been told by the T8imes helpline that this is an Apple problem with its Newsstand. I have tried deleting the App and reloading it. Still the same message "Failed to load the Kiosk" appears. I have tried a hard reset of the iPad, again without success. Can you suggest anything else?

You bought an app but it did not work properly on your device. You can easily report problems with your iTunes Store purchases via the iTunes Store. Here is how:
Launch iTunes > Choose Store > Sign in.
Store > View My Account > Purchase History then Click the Report a Problem button.
Fill out the form explaining the problem you are having.
Submit the problem report and wait for a response from Apple, they usually respond within 24 hours.
Notes:
When Apple emails your invoice, there will be a link on the invoice. You may also click the “Report Problem” link next to the app that you are having issues with to report your problems.
Problems with in-app purchases or free apps, report them here:http://www.apple.com/support/itunes/ww/
Before reporting your issue, make sure that you followed these troubleshooting steps explained here.
<Link Edited by Host>

Ovi app wizard apps on n97 mini

i cant get any of the new ovi app wizard apps to load on my n97 mini? the app opens but the feed doesnt load, does anyone have any idea how i can sort this? thanx in advance.

i have this experienced too.
At last i found out that it is because you have update your ovi suite and the setting within will change.
Be sure you have check you map store location are on the correct place as if you have memory card installed.
First :- On your ovi suite, go to TOOLS -> OPTIONS -> MAPS.
On your right hand side you will see "SELECT THE DEVICE MEMORY USED FOR SAVING MAPS DATA".
Below it have a drop box. Make sure the drop box is not empty (it will be if you did not connect your phone.)
If you have connect your phone then the memory location should be MASS MEMORY (E
once this set, click ok then back to maps.
if it does not refresh. unplug your phone and plug it in again.
If this still not help then go to your phone delete CITIES folder and QF files. ( you will need to re-donwload the MAPS and voice guidance).
After delete it, you will need to acess the MAPS program on your phone to regenerate that folders and file you have delete.
also remember to check the setting on your phone is same as your computer, MAPS storage location are same MASS MEMORY (E.
GOOD LUCK,

Wlan stop working for N97 Mini

Dear Friends
greetings;
I've got N97 mini; when I use the wifi it shows connected but no response I can't log on any site
I saw when I check the connection that it show message active/and after while in active and so on
hope I found a solution
thanx

Another thing, I can still get the mac address from the phone by dialing *#62209526#.
Hope this helps

Applet failed to load when visited using HTTPs protocol with Java 7

We have a java applet on our website which worked for ages. Then Java 7 came out, people installed it. When people with Java 7 visiting our website using HTTPS, the applet failed to load (ClassNotFoundException). The same site and the same applet, when visit using regular HTTP, it works fine.
People with previous version of Java (1.6.x) can see the applet using either HTTP or HTTPs with no problem.
Anything we can do on our side to resolve this problem for people with Java 7 and like to stay with HTTPS?
Googled and didn't see any relevant result. Any pointer would be much appreciated.

Thanks for the quick response.
Not much on the stack trace, did a tread dump below.
It is an application requires login, please sent and email to [email protected] and I will sent you the url and login info by email.
Thanks
plugin2manager.parentwindowDispose
Java Plug-in 10.4.0.22
Using JRE version 1.7.0_04-b22 Java HotSpot(TM) Client VM
User home directory = C:\Users\dchen
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Dump thread stack ...
2012-05-10 17:17:59
Full thread dump Java HotSpot(TM) Client VM (23.0-b21 mixed mode, sharing):
"D3D Screen Updater" daemon prio=8 tid=0x04fa1800 nid=0x530 in Object.wait() [0x0a0df000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at sun.java2d.d3d.D3DScreenUpdateManager.run(Unknown Source)
     - locked <0x296c0248> (a java.lang.Object)
     at java.lang.Thread.run(Unknown Source)
"ConsoleTraceListener" daemon prio=4 tid=0x04fa0000 nid=0x269c in Object.wait() [0x09c8f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at com.sun.deploy.uitoolkit.ui.ConsoleTraceListener$ConsoleWriterThread.run(Unknown Source)
     - locked <0x296c0c90> (a com.sun.deploy.uitoolkit.ui.ConsoleTraceListener$BoundedStringBuffer)
"AWT-EventQueue-1" prio=6 tid=0x04fa2000 nid=0x1730 waiting on condition [0x0a6ce000]
java.lang.Thread.State: RUNNABLE
     at com.sun.deploy.uitoolkit.ui.ConsoleHelper.dumpAllStacksImpl(Native Method)
     at com.sun.deploy.uitoolkit.ui.ConsoleHelper.dumpAllStacks(Unknown Source)
     at com.sun.deploy.uitoolkit.impl.awt.ui.SwingConsoleWindow$2.actionPerformed(Unknown Source)
     at javax.swing.JComponent$ActionStandin.actionPerformed(Unknown Source)
     at javax.swing.SwingUtilities.notifyAction(Unknown Source)
     at javax.swing.JComponent.processKeyBinding(Unknown Source)
     at javax.swing.KeyboardManager.fireBinding(Unknown Source)
     at javax.swing.KeyboardManager.fireKeyboardAction(Unknown Source)
     at javax.swing.JComponent.processKeyBindingsForAllComponents(Unknown Source)
     at javax.swing.JComponent.processKeyBindings(Unknown Source)
     at javax.swing.JComponent.processKeyEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
"TimerQueue" daemon prio=4 tid=0x04f9e000 nid=0x3e0c waiting on condition [0x09f3f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x24620900> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.util.concurrent.DelayQueue.take(Unknown Source)
     at javax.swing.TimerQueue.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"AWT-EventQueue-4" prio=4 tid=0x04fa1400 nid=0x255c waiting on condition [0x0945f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x246209e8> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.awt.EventQueue.getNextEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
"Applet 5 LiveConnect Worker Thread" prio=4 tid=0x04f9f400 nid=0x3994 in Object.wait() [0x05d9f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at sun.plugin2.main.client.LiveConnectSupport$PerAppletInfo$LiveConnectWorker.run(Unknown Source)
     - locked <0x24620ac8> (a java.lang.Object)
     at java.lang.Thread.run(Unknown Source)
"AWT-EventQueue-0" prio=6 tid=0x04f9fc00 nid=0x3b2c waiting on condition [0x0608f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x2979ab70> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.awt.EventQueue.getNextEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
"AWT-Shutdown" prio=6 tid=0x04f9e800 nid=0x244c in Object.wait() [0x0669f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at sun.awt.AWTAutoShutdown.run(Unknown Source)
     - locked <0x2979acd8> (a java.lang.Object)
     at java.lang.Thread.run(Unknown Source)
"TimerQueue" daemon prio=6 tid=0x04fa0c00 nid=0x3914 waiting on condition [0x0a65f000]
java.lang.Thread.State: WAITING (parking)
     at sun.misc.Unsafe.park(Native Method)
     - parking to wait for <0x29c27340> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
     at java.util.concurrent.locks.LockSupport.park(Unknown Source)
     at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
     at java.util.concurrent.DelayQueue.take(Unknown Source)
     at javax.swing.TimerQueue.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"JVM[id=2]-Heartbeat" daemon prio=6 tid=0x04f9ec00 nid=0x3c98 in Object.wait() [0x0687f000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at sun.plugin2.main.server.HeartbeatThread.run(Unknown Source)
     - locked <0x2979a7a0> (a sun.plugin2.main.client.PluginMain$Heartbeat)
"Browser Side Object Cleanup Thread" prio=6 tid=0x04f9d000 nid=0x3ce4 in Object.wait() [0x0710f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979a958> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979a958> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at sun.plugin2.main.client.LiveConnectSupport$BrowserSideObjectCleanupThread.run(Unknown Source)
"CacheCleanUpThread" daemon prio=6 tid=0x04f9dc00 nid=0x2500 in Object.wait() [0x0655f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979a978> (a com.sun.deploy.cache.CleanupThread)
     at java.lang.Object.wait(Object.java:503)
     at com.sun.deploy.cache.CleanupThread.run(Unknown Source)
     - locked <0x2979a978> (a com.sun.deploy.cache.CleanupThread)
"CacheMemoryCleanUpThread" daemon prio=6 tid=0x04f9d400 nid=0x1ac4 in Object.wait() [0x0611f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979aa68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979aa68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at com.sun.deploy.cache.MemoryCache$LoadedResourceCleanupThread.run(Unknown Source)
"SysExecutionTheadCreator" daemon prio=6 tid=0x04f9c800 nid=0x3ff4 in Object.wait() [0x0660f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at sun.plugin.util.PluginSysUtil$SysExecutionThreadCreator.run(Unknown Source)
     - locked <0x2979aa88> (a sun.plugin.util.PluginSysUtil$SysExecutionThreadCreator)
"AWT-Windows" daemon prio=6 tid=0x04f8f000 nid=0x3480 runnable [0x026af000]
java.lang.Thread.State: RUNNABLE
     at sun.awt.windows.WToolkit.eventLoop(Native Method)
     at sun.awt.windows.WToolkit.run(Unknown Source)
"Java2D Disposer" daemon prio=10 tid=0x04f8d000 nid=0x1920 in Object.wait() [0x064ff000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979ad68> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at sun.java2d.Disposer.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
"Java Plug-In Pipe Worker Thread (Client-Side)" daemon prio=6 tid=0x04f8a000 nid=0x580 runnable [0x0617f000]
java.lang.Thread.State: RUNNABLE
     at sun.plugin2.os.windows.Windows.ReadFile0(Native Method)
     at sun.plugin2.os.windows.Windows.ReadFile(Unknown Source)
     at sun.plugin2.ipc.windows.WindowsNamedPipe.read(Unknown Source)
     at sun.plugin2.message.transport.NamedPipeTransport$SerializerImpl.read(Unknown Source)
     at sun.plugin2.message.transport.NamedPipeTransport$SerializerImpl.readByte(Unknown Source)
     at sun.plugin2.message.AbstractSerializer.readInt(Unknown Source)
     at sun.plugin2.message.transport.SerializingTransport.read(Unknown Source)
     at sun.plugin2.message.Pipe$WorkerThread.run(Unknown Source)
"Timer-0" prio=6 tid=0x04f3d800 nid=0x2c38 in Object.wait() [0x0521f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     - waiting on <0x2979b0a8> (a java.util.TaskQueue)
     at java.lang.Object.wait(Object.java:503)
     at java.util.TimerThread.mainLoop(Unknown Source)
     - locked <0x2979b0a8> (a java.util.TaskQueue)
     at java.util.TimerThread.run(Unknown Source)
"traceMsgQueueThread" daemon prio=6 tid=0x04f19c00 nid=0x3b50 in Object.wait() [0x054cf000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at com.sun.deploy.trace.Trace$TraceMsgQueueChecker.run(Unknown Source)
     - locked <0x298209e0> (a java.util.ArrayList)
     at java.lang.Thread.run(Unknown Source)
"Service Thread" daemon prio=6 tid=0x04e80c00 nid=0x2930 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"C1 CompilerThread0" daemon prio=10 tid=0x04e7c400 nid=0x2648 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Attach Listener" daemon prio=10 tid=0x04e7b000 nid=0x1b5c runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x04e77c00 nid=0x1bd0 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=8 tid=0x022e1000 nid=0x3d00 in Object.wait() [0x04c5f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     - locked <0x2979b330> (a java.lang.ref.ReferenceQueue$Lock)
     at java.lang.ref.ReferenceQueue.remove(Unknown Source)
     at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
"Reference Handler" daemon prio=10 tid=0x022df800 nid=0x3644 in Object.wait() [0x04bdf000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:503)
     at java.lang.ref.Reference$ReferenceHandler.run(Unknown Source)
     - locked <0x2979a0c8> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x0036d800 nid=0x2f40 in Object.wait() [0x00a2f000]
java.lang.Thread.State: WAITING (on object monitor)
     at java.lang.Object.wait(Native Method)
     at sun.plugin2.message.Queue.waitForMessage(Unknown Source)
     - locked <0x2979b3b8> (a sun.plugin2.message.Queue)
     at sun.plugin2.message.Pipe$1.run(Unknown Source)
     at com.sun.deploy.util.Waiter$1.wait(Unknown Source)
     at com.sun.deploy.util.Waiter.runAndWait(Unknown Source)
     at sun.plugin2.message.Pipe.receive(Unknown Source)
     at sun.plugin2.main.client.PluginMain.mainLoop(Unknown Source)
     at sun.plugin2.main.client.PluginMain.run(Unknown Source)
     at sun.plugin2.main.client.PluginMain.main(Unknown Source)
"VM Thread" prio=10 tid=0x022de400 nid=0x3cc0 runnable
"VM Periodic Task Thread" prio=10 tid=0x04ea9000 nid=0x3fd4 waiting on condition
.main.client.PluginMain.run(Unknown Source)
     at sun.plugin2.main.client.PluginMain.main(Unknown Source)
"VM Thread" prio=10 tid=0x022de400 nid=0x3cc0 runnable
"VM Periodic Task Thread" prio=10 tid=0x04ea9000 nid=0x3fd4 waiting on condition
Done.

Value Object Factory Pattern - failing to load ValueObject class

Hello -
I'm feeling out the ValueObjectFactory pattern and am running into a problem. My SessionEJB is deployed and working (it's returning values to me, etc.).
Problem: when the ValueObjectFactory class tries to run class.forName(voClassName) where voClassName is the name of the class I want loaded, I get " ENGINE-classload_failed: Failed to load class voClassName" exception followed by "java.lang.ClassNotFoundException: voClassName".
I made sure my classpath is ok in the build scripts, I'm bouncing the server like it's a drunk raising hell in my bar, I made sure files were in their respective homes, their names spelled correctly, and that they are read/write/exe - nada. FYI: I'm on NAS 4.0. Any ideas? HELP!!
Heather

Please place your voClass in the SessionEJB jar file.

Failed to load components. Please reinstall the ap...

i have an n95.
windows xp sp 2.
my os is running in english.
the version for pc suite i downloaded was in english for the n95.
pc suite version 6.84.
all the applications work in pc suite EXCEPT for imagestore and applicationinstaller. anytime i try to load these applications it says "failed to load application components. please re-install the program." i HAVE uninstalled the program/drivers/ran pc suite cleaner. five times. i have tried installing an older version of pc suite (the one included in the n95 box). i've tried running that .bat file in pc connectivity solutions. i've tried re-installing through safe mode. this thing is driving me crazy! i just want to install apps on my n95
anybody know how to fix this problem? or does anybody have any suggestions? i tried talking to nokia support but they kept telling me to re-install the program. which i did... obviously it didn't work though. thanks.

Hi,
Maybe some of system dll file is missing from your PC. Can you take some logs from PC Suite's application installer?
If you can, do this:
1. Go to http://www.sysinternals.com/Utilities/Filemon.html and download Filemon (it is end of the page).
2. Start FileMon.exe and click 'Options', 'Filter/Highlight..' and set string: *Application* to 'Include' option.
3. Go to http://www.sysinternals.com/Utilities/Regmon.html and download Regmon (it is end of the page).
4. Start RegMon.exe and click 'Options', 'Filter/Highlight..' and set string: *Application* to 'Include' option.
6. Start Nokia Application installer
7. when you get the error message, save logs and attach those log files to your response message (or save to www.savefile.com and send link to me)

Street maps - can't add street maps n97 mini

Hi , I recently downloaded the new ovi maps free navigation on my n97 mini and installed fine but now ii am stuck, it wont let me add the street maps, l have tried getting them via wi-if but after checking for updates on the server for 5mins it says could not find any or something along those line and l have tried for day.
Then l tried using the ovi suite but went l go to maps after it has asked me which memory l want to use and l chose phone memory 7gb free, then it say error has occurred please restart your laptop or re-install the PC suite and l have done all that and still says the same thing . Please help!!

@Jesusislord
Haven't got a Windows laptop around to try as primarily a Mac user, but if both WiFi and Ovi Suite methods won't work it's more likely to be your set up on N97Mini!
You are ensuring that both Ovi Maps application upon N97 Mini and Ovi Suite have been set to look for either E:\ mass memory or F:\ memory card? For Ovi Maps on N97 Mini you have to exit application and start again for any changes to be recorded.
Happy to have helped forum with a Support Ratio = 42.5

Can I use Mac Mini as a "server" for a MacBook Pro and iMac?

I want to develop a simple system for accessing my files from multiple devices.
I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time). Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule. We use wireless fibre optic broadband.
I don't really want multiple iTunes and iPhoto libraries. We want all our music and pictures in single master libraries that we can all access and update.
As there is seemingly too much data to store on iCloud, we need to find an alternative solution.
My possible solution is:
(1) Load my master iTunes, iPhoto and iMovie libraries ("iTPM libs") on a Mac mini
(2) Buy a new MacBook Pro or iMac (probably doesnt matter which)
(3) Link the MacBook Pro(s) and iMac to the Mac mini to access iTunes, iPhoto and iMovie and the master iTPM libs
(4) Plug the portable hard drives into the Mac mini whenever I need to access the video content stored on the portable hard drives
(5) Add "users" to the system (i.e. family members), in the same way you would access a shared server at work
(6) Over time, buy more computers to access the system in the same way
My questions are:
(1) Is this system feasible?
(2) If so, can I edit the iTPM libs from the MacBook Pro or iMac?
(3) If so, what happens if both the MacBook Pro and iMac are accessing the libraries at the same time? Which takes precedent?
(4) Would this solution be significantly slower than having separate libraries on the different computers?
(5) Is there an alternative approach that might work better for my needs? (which are, after all, relatively straight forward). When I went to the Apple store they were unsure!
Many thanks.

I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time). Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule.
[…] We want all our music and pictures in single master libraries that we can all access and update.
The "update" portion of this is where your problems will arise. You'd be better to consider your proposed system initially in terms of content "consumption", before getting into the nitty-gritty of editing shared content.
iTunes has the Home Sharing feature built-in, which solves the content consumption issue.
I don't know anything about sharing iPhoto libraries, but this KB article looks useful.
As for iMovie, I think there are two things you want to do: share the raw data (sound effects, music, photos etc.) that are used to create iMovie content; and share the finished results. Is that right? I'm not sure how you'd go about doing that, but if you clarify your aims in this regard, it'll help the next person who comes along.
When it comes to updating content, such as adding new music to iTunes or iPhoto, I'd suggest you do it through the Mac mini directly. This seems the least problematic solution. You wouldn't necessarily need a dedicated display for the Mac mini - you could use remote desktop or VNC or what-have-you.
As for speed: doing anything across a network is always going to be slower than doing it locally. But, it probably won't matter for content consumption (though if you're all watching different movies at the same time the drives on the server may struggle, and the wifi bandwidth might be tight).
I hope this represents a good initial response to your query.

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Download files from mac to N97 mini/WLAN

I can access the net through WLAN from my N97 mini, and download from anywhere except for my own Mac (snow leopard).
My wireless router can see the phone, and gives it an IP address, but I get nowhere when I key the address in on my mac.
ISync works OK for calendar and contacts.
What am I doing wrong?

Hi, I'm not that techy. but don't think N97 has share on home network (like N95 had) so I use either bluetooth or usb to transfer files (usb much faster) but I also use pc not mac. Hope someone with more technical knowledge can help'
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Recording Cable TV Shows using Mac Mini

Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir

munirul wrote:
Hi:
does anyone know how to record cable tv shows using Mac Mini?
please discuss the hardware and software issues.
Munir
There are several possible ways, some depend on the type of Cable TV system you have. First I am going to assume you are an American. While Cable TV is available in other countries, for example here in the UK, it ***** so bad in the UK that you are unlikely to be using it here.
Now, with American Cable the first possible method has already been mentioned by others which is to use an analogue connection from your cable box to an Elgato EyeTV 250 (possibly discontinued). This is an analogue tuner for a Mac and will let your Mac record the signal. There is also the more expensive EyeTV 250Plus which includes a chip to do the conversion to MPEG2 and take the load off your Mac. This method will work whether your Cable box is analogue or digital.
If your Cable box uses "Clear QAM" then you could get the HDHomeRun box from Elgato. This not only will provide a direct digital signal with no loss of quality, but will also provide two tuners, and can be shared across your home network. There is also the EyeTV 500 see http://www.elgato.com/index.php?file=products_eyetv500 but this also may have been discontinued.
Finally, if your Cable box has a FireWire connection (and by law they have to give you the option of this) then you can connect the box via FireWire to your Mac and run software on your Mac. Again this will be a direct digital capture with no loss of quality. See the following two pages for information on how to do this.
http://www.ammesset.com/irecord/
http://project-tigershark.com/people/rob/blog/2007/01/14/cable-tv-mac-firewire-h d-pvr/
Note: I am in the UK and have no direct experience of any of the above, and can only gnash my teeth in frustration at how spoilt for choice US TV/Mac users are compared to the pathetic massively DRMed situation here in the UK.

N97 Mini Map Loader using Mac OS X failed to load ...

Similar Messages

Maybe you are looking for