N97 Network Failure 2G

My Nokia N97 purchased in july 2009 is now having network trouble, ie it wont catch any network in a 2G sim. But works in 3G mode.. When I contacted nokia care they said to replace the entire mother Board which is quite expensive.. Friends any solution for this please inform me.. Weather a new Firmware upgrade can solve this? Heard that a new firmware v30 id releasing for n97.Any information regarding that?
 Please help me friends!

Was the network mode set to GSM, just a check.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

  • Portal failed to access remote resource due to network failures

    Hi,
    We have a portlet that allows users to upload files to a SQL Server database and make it available for other users to access. The portlet code is on our remote servers. Everything works fine in dev environment, but certain files fail in pre-prod and prod within the portal, but work fine when the code is executed outside the portal.
    I keep getting this error:
    Error - Portal failed to access remote resource due to network failures. Try again later or contact your portal administrator.     
    What could the problem be?
    Thank you for your help.
    Rad

    If the Studio service looks good on the remote server where Studio is installed (check that
    the service is started and look in the Studio logs for any warnings or errors), you should
    also verify the configuration settings in the Studio remote server object. Is it properly
    configured and pointing to the correct remote server?
    If so, check the portal servers access to the Studio server via the port specified in the remote
    server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
    prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
    the name of your Studio remote server. The screen should just go blank, meaning that there is
    something accepting connections on that port on the given server. (We would hope it's the Studio
    app and not another service occupying that port.) If you get "Could not open connection to the host"
    or some such similar result, check that the network between the portal and the Studio remote server
    is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
    communication between the two servers).

  • Modbus ip shared variable network failure

    I am using lab view 8.6 DSC module to communicate to a watlow system which contains five watlow 96 controllers and an EM gateway.  I have created shared variables for the process temperatures and setpoints for each of the five controllers using watlow modbus register Numbers with a 400001 offset.  I have also created shared variables for Updating,CommFail,UpdateNow,and UpdateRate which where predefined. I have error when starting the VI if the SV  has been  dragged and dropped into the block diagram. The message is  Error -1967353902 (The Modbus I/O server failed to receive any response from the Modbus slave device.) occurred at SV in vi. If I bind a variable in the VI to this same SV the error does not occur but the variable cycles between Good, Network Failure, No known value, and device failure as stated in the variable manager watched variables.  The Updating, CommFail and UpdateRate all have a consistent Good in the quality column of the variable manager.  UpdateNow has X in value, type, timestamp, and quality columns.  CommFail and Updating does cycle between true and false randomly.  I have tried a third party software called SpecView 32 demo to see if the commincation with the modbus system is not working and I can create five watlow controlers on my screen and direct them to the ip address along with a unit address and the system works without faults.  This leads me to believe the commincation bewteen the SV Engine and the IP address is not correct.  HELP Please. 
    Robert Jensen
    UND EERC

    If your application can deal with it I would recommend staying clear of the 'Networked Published' option.
    When I started my Modbus development on cRIO....I left it enabled, and with ~100 shared variables on a 9074, the CPU was railing, and I saw a buffering behavior on the shared variables (which was not desirable in my application).
    In my application I am using the old modbus library (as apposed to the new API) for cRIO to slave comms, the cRIO being the master.
    I am also using the IOserver making the cRIO a slave to an external SCADA - and it passes essentially the same data arrays as I use on the modbus library for my local HMI [Not an NI product].....Which is two full Modbus frame writes (@ 120 words each, and about 60 words more for ~300 words outbound from the cRIO).
    The IOserver slave was a recent addition and did not add much to the CPU load - although only 16 bytes is high speed, the balance of the total word package is at either 1 second or 3 seconds.
    So, in my experince, the 'Networked Published' option adds significant CPU loading (on entery level cRIOs) YMMV.
    I am huge fan of the shared variable engine (some at NI were pusing the CVT, and TCE etc...). However most of my shared variables are not the Networked Published variety (excepting local module channels) those have remained networked published for DSM (Distributed System Manager) use.

  • How to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    What does this have to do with using an iPhone in an enterprise environment?
    What carrier are you using and where did you get the phone?

  • JMS adapter webspehere mq, network failure - stop

    Hello,
    After a network failure the JMS sender adapter (JMS --> XI) goes red, and doesn't automatically recover after a network failure. It is necessary to manually stop and start the adapter. This is bad design from SAP. You would like it to behave like the ftp adapter which automatically continues to poll for files after a network outage.
    What can be done to overcome this bad design?
    I'm on XI SP 18.
    My Idea is to use the new AAM described in
    SAP Note 766332
    1. com.sap.aii.af.service.administration.cpa: Channel-related interfaces and APIs
    2. com.sap.aii.af.service.administration.monitoring: Monitoring interfaces and APIs
    3. com.sap.aii.af.service.administration.i18n: Localization interfaces and APIs
    I would like to write a standard j2se application to connect using jndi to list the status of the channels, and then stop and start depending on status.
    Which jar files should be included?
    Example code?

    Hello,
    I have now built a workaround solution based on the AAM API.
    It is implemented as a J2EE stateless session bean and a J2EE client. The client reads config with information about which channels to restart and calls the bean which checks status on the channels and restarts the ones with errors or in a stopped state. We schedult the program to run every 5 minutes and check the status.
    Check the channelstatus.jsp for hints on how to use the api.
    It's a pity SAP hasn't got this functionality builtin, it's clearly a design error.
    /Otto
    Edited by: Otto Frost on Dec 18, 2007 4:32 PM

  • Sign in has failed. Network failure.

    Hi All,
    We are half way through updating an iPad issue and after rebooting because the upload was hanging in the Folio Builder we cannot log in due to network failure. Cannot sign into https://digitalpublishing.acrobat.com either under any log in.
    http://status.adobedps.com/ is saying everything is fine, is anyone else having the same problem? Was working, if not a little slow, this morning but now we cannot access anything. Our internet connection seems fine and can access everything else.
    Any help would be appreciated.
    Thanks.

    You're not alone, check http://forums.adobe.com/message/5988644#5988644

  • Upload has failed. Network failure

    Hello.
    Since i work with indesign cc, i have a trouble wit folio builder panel: Everytime the upload fails at first attempt, it appears this message:"Upload has failed. Network failure." Ever works when i retried, but not at first attempts. This is unworkable with large publications, with a lot of articles. I´ve wrote that this is a trouble with the acrobat.com service outage, i need a solution.
    Thanks. Best regards. 

    Was successfully re-linking indesign files to my dps producer dashboard.  Files had been converted to CC (from CS6)-- and was switching from v26 to v 28.    Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then  I began getting the NETWORK FAILURE notice. 
    This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
    These files are from a successful app-- already in the app store, but it sure doesn't work right now!  IOS 7 ... #!#*?
    It is not about where your files are-- or how much memory -- Something else is going on. 
    I know you guys will figure it out...and will be standing by, anxious to fix my app!
    THANKS.
    nancy p

  • Upload failed "network failure"

    Why is it that I get upload failed "network failure" msg on folio builder, immedieatly hit retry and it goes thru, or after several trys it goes thru? Or sometimes it goes on the first try, and then I make a small change and the upload will not work again? My upload speed is 20 Mbps.

    I am getting the same error message - I just updated the Folio producer tools that were released on OCT 10 for 5.5

  • Oracle 10g CRS autorecovery from network failures - Solaris with IPMP

    Hi all,
    Just wondering if anyone has experience with a setup similar to mine. Let me first apologise for the lengthy introduction that follows >.<
    A quick run-down of my implementation: Sun SPARC Solaris 10, Oracle CRS, ASM and RAC database patched to version 10.2.0.4 respectively, no third-party cluster software used for a 2-node cluster. Additionally, the SAN storage is attached directly with fiber cable to both servers, and the CRS files (OCR, voting disks) are always visible to the servers, there is no switch/hub between the server and the storage. There is IPMP configured for both the public and interconnect network devices. When performing the usual failover tests for IPMP, both the OS logs and the CRS logs show a failure detected, and a failover to the surviving network interface (on both the public and the private network devices).
    For the private interconnect, when both of the network devices are disabled (by manually disconnecting the network cables), this results in the 2nd node rebooting, and the CRS process starting, but unable to synchronize with the 1st node (which is running fine the whole time). Further, when I look at the CRS logs, it is able to correctly identify all the OCR files and voting disks. When the network connectivity is restored, both the OS and CRS logs reflect this connection has been repaired. However, the CRS logs at this point still state that node 1 (which is running fine) is down, and the 2nd node attempts to join the cluster as the master node. When I manually run the 'crsctl stop crs' and 'crsctl start crs' commands, this results in a message stating that the node is going to be rebooted to ensure cluster integrity, and the 2nd node reboots, starts the CRS daemons again at startup, and joins the cluster normally.
    For the public network, when the 2nd node is manually disconnected, the VIP is seen to not failover, and any attempts to connect to this node via the VIP result in a timeout. When connectivity is restored, as expected the OS and CRS logs acknowledge the recovery, and the VIP for node 2 automatically fails over, but the listener goes down as well. Using the 'srvctl start listener' command brings it up again, and everything is fine. During this whole process, the database instance runs fine on both nodes.
    From the case studies above, I can see that the network failures are detected by the Oracle Clusterware, and a simple command run once this failure is repaired restores full functionality to the RAC database. However, is there anyway to automate this recovery, for the 2 cases stated above, so that there is no need for manual intervention by the DBAs? I was able to test case 2 (public network) with the Oracle document 805969.1 (VIP does not relocate back to the original node after public network problem is resolved), is there a similar workaround for the interconnect?
    Any and all pointers would be appreciated, and again, sorry for the lengthy post.
    Edited by: NS Selvam on 16-Dec-2009 20:36
    changed some minor typos

    hi
    i ve given the shell script.i just need to run that i usually get the op like
    [root@rac-1 Desktop]# sh iscsi-corntab.sh
    Logging in to [iface: default, target: iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz, portal: 192.168.181.10,3260]
    Login to [iface: default, target: iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz, portal: 192.168.181.10,3260]: successfulthe script contains :
    iscsiadm -m node -T iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz -p 192.168.181.10 -l
    iscsiadm -m node -T iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz -p 192.168.181.10 --op update -n node.startup -v automatic
    (cd /dev/disk/by-path; ls -l *sayantan-chakraborty* | awk '{FS=" "; print $9 " " $10 " " $11}')
    [root@rac-1 Desktop]# (cd /dev/disk/by-path; ls -l *sayantan-chakraborty* | awk '{FS=" "; print $9 " " $10 " " $11}')
    ip-192.168.181.10:3260-iscsi-iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz-lun-1 -> ../../sdc
    [root@rac-1 Desktop]# can you post the oput of ls /dev/iscsi ??you may get like this:
    [root@rac-1 Desktop]# ls /dev/iscsi
    xyz
    [root@rac-1 Desktop]#

  • How to design a grid to withstand a partial network failure

    Hi,
    We are evaluating Coherence for a mission-critical system where we want to test partial network failure scenario. We want to run 4 physical hosts, 8 JVMs with 2 JVM on each host. The evaluation criteria is to connect 2 machines on either side of a router, kill one side during a load test, thereby disconnecting the 2 machines and run with the remaining two. In order to have a fail-safe behavior in this scenario, I guess we must ascertain that the back-ups for the objects on one side of a router are always made on the other side. Can Coherence detect such a network set up and store backups accordingly? Or is there a way to configure this by overriding the default behavior?
    Pls advise
    Thanks,
    Sairam

    Hi Sairam
    If you use scenario 1) then your test will work. As this scenario only has two machines then the primary node for a piece of data will be on one machine and Coherence will make sure the backup is on the other machine. If you then break the link between the machines or lose a machine you will not have lost data.
    If however you have more than 2 machines then you break the link between them you have what is known as a split-brain - which means you have effectively split your cluster in two. Both sides only know they they can no longer see the other part of the cluster and assume they are must be the remaining working part. In this case though you will have lost data from the cluster as some of the backups for each part of the cluster will be on the other part. There is nothing you can do about this, you cannot control which machines backups are allocated to.
    Increasing the backup count to 3 does not give you any more reliance than having a backup count of 2. As far as I know Coherence only guarantees that the placement of the first backup is on another machine.
    I am not quite sure what you are trying to test as a Coherence cluster cannot automatically survive a network failure that splits the cluster. There are things in 3.6 that you might be able to do with Quorums to mitigate the damage while you recover and there are things you can do to make recovery easier - but you will have to recover lost data.
    JK

  • Handling Network failure during data transfer from ECC to PI

    Hi,
    We have created a custom program in ECC to push invoice header information to PI using the proxy call.
    We're able to successfully now push these data to PI without any issues.
    However, there is a comment from client like if there is an unexpected error such as system or network failure during transferring data from ECC to PI, then how is it being handled from ECC side?
    I'm left with no answers. I know the messages will be stucked in SMQ2 or SMQ1 but we need to find out how can resend those data to PI in case of such failures. Documents in ECC are either posted or parked or payment totally based on real time process and based on each ECC event such as parked or posted or reveresed, we are sending one message to PI respectively. But how can we resend these invoices incase of an unexpected error?
    If we go with an ad hoc process, how do we implement this process for each document which is being created or rejected.
    Thanks,
    Shamim

    Hi,
    The queue will automatically restart if the problem was connection issue. In case of system failure you need to check and start them manually.
    check http://help.sap.com/saphelp_nw04/helpdata/en/f3/df5f3cb0decb09e10000000a114084/content.htm
    To check for any problems you can use CCMS monitoring.
    check http://help.sap.com/saphelp_470/helpdata/en/52/12f73b7803b009e10000000a114084/content.htm
    Hope this will help you.
    Regards
    Vinit

  • APP-V 5 SP1 - "Application Failed to Launch. This may be due to a network failure 0x0FD01B25-0000007B"

    Hello all,I am having some issues with APP-V 5.
    I am having particular issues with starting a packaged SIMS.net. I keep recieving:
    "Application Failed to Launch. This may be due to a network failure 0x0FD01B25-0000007B"
    ...within a second or two of clicking on the app-v created shortcut for this software.
    To clarify, I had this software working perfectly previously. I recreated this package due to a software update, but it fails to launch now. I started a new package from scratch as this is a complex piece of software with multiple installers to run etc.
    To be honest, I keep seeing this error on other applications. At one point, nearly every published app returned the same error. I spent a day trying to diagnose but the following day, everything mysteriously started working again.
    I have had a look on kirks blog & Tim Magan, but to no avail.
    Any help would be greatly appreciated, as this is a 'business critical application' (as they say).
    Quick overview of my setup:
    - Single Server configuration (Management, Publishing & SQL) on Server 2012 VM in 2012 Hyper-V
    - Win 2000 Domain with 2003 DC
    - Windows 7 Enterprise SP1
    - SIMS.net Summer 2013 sequenced on 32bit following best practice guide
    - Deploying to 32 bit machine
    - Client settings pushed by GPO. Powershell execution policy set to allsigned.

    RESOLVED: This error is caused by the "Program Files" missing from the "C:\ProgramData\Microsoft\Windows\Start Menu\" folder.
    Firstly, a big thank you Nicke. You may not have solved the problem, but you sent me down the road to resolve this issue.
    After trying the step you mentioned, I placed the computer in an OU with inheritance disabled. From this point onwards, I deduced that it was actually a group policy issue.
    In my environment, I redirect start menus to generated start menu. This is created using a powershell script to combine locally installed items and network items. This scripts deletes the content of the 'programdata' start menu (i.e all users start menu)
    to prevent these items disrupting the start menu.
    Now... The app-v packages were breaking because, the 'Start Menu > Programs' folder did not exist. If an empty 'Start Menu > Programs' exists, the packages work correctly.
    I can only assume that the two packages that were working correctly - that I installed these for 'current user only', rather than 'all users'.
    It seems a little silly to me that app-v should fall over for something so simple. However, you could argue that it serves me right for playing about with system files :)
    Thanks again for the help.
    Mark

  • An error has occurred while saving your changes to the server. Network failure.

    When I'm importing my articles I get this message. "An error has occurred while saving your changes to the server.
    Network failure. Do you want to try again?"
    Any Help would be great.

    I had several fails yesterday as well.  Not sure what the issue was.  Haven't tried today, but I know there were 1 or 2 other people posting the same issue.

  • Server side does not detect network failure

    Hi folks,
    I coded a simple chat program. When a client connects to the multi-thread server, server shows newly connected client's IP address. Now, if the connection between client and server is down, client detects and terminates itself but server does not. The server still shows that client as connected. when I traced the server side, I found out that server was waiting at the readObject (client object input stream) line but it didn't throw any IOException. I tried to send some message to all connected client at every 20 seconds, so I expected to catch IOException when the server did not reach the client. Unfortunately, it didn't work. That is my question how can server side detect network failure?
    Thanks for help.
    Regards
    Bulent

    That is how TCP works (noting that it has nothing to do with java.)
    Your solution is one of the following or some combination...
    - If the server does not receive something every X time period then it disconnects.
    - If the server has not received something after X time period it sends a keep alive message to the client. If the client does not respond (or the message fails) then the server disconnects.

  • EBS 11i - Concurrent Manager goes down due to network failure.

    Hi,
    We have a Single Node Oracle EBS 11i (11.5.10) [upgraded from 11.0.3] Production Instance on a Windows 2003 (32-Bit) server.
    We have UPS support for the Server but the Netwok Switch is not on UPS. Due to this whenever there is a power trip the network goes down and due to this the Concurrent Manager (only)goes down. All other Apps Tier and DB Tier services are up inlcluding the 806 Listener (APPS_SID).
    Is this how it is designed to work? Is there anyway to ensure that the Conc. Manager does not go down due to network failure.
    Rgds,
    Thiru

    Here it is
    Process monitor session ended : 02-OCT-2009 07:30:04
    The Internal Concurrent Manager has encountered an error.
    Review concurrent manager log file for more detailed information. : 02-OCT-2009 07:43:16 -
    Shutting down Internal Concurrent Manager : 02-OCT-2009 07:45:56
    Reviver is not enabled, not spawning a reviver process.
    List of errors encountered:
    _ 1 _
    Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
    hostdef extension doesn't exist
    Review your error messages for the cause of the error. (=<POINTER>)
    _ 2 _
    Routine AFPSMG encountered an ORACLE error. ORA-03114: not connected
    to ORACLE
    Review your error messages for the cause of the error. (=<POINTER>)
    _ 3 _
    Routine FDPCRQ encountered an ORACLE error. ORA-03113: end-of-file on
    communication channel
    Review your error messages for the cause of the error. (=<POINTER>)
    APP-FND-01564: ORACLE error 1041 in fdudat
    Cause: fdudat failed due to ORA-01041: internal error. hostdef extension doesn't exist.
    The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
    List of errors encountered:
    _ 1 _
    Routine AFPCAL received failure code while parsing or running your
    concurrent program CPMGR
    Review your concurrent request log file for more detailed information.
    Make sure you are passing arguments in the correct format.
    The PROPTRN_1002@PROPTRN internal concurrent manager has terminated with status 1 - giving up.

Maybe you are looking for