N97 not starting after software reinstallation

Hi All, Just reinstalled the software on my phone and now it refuses to start. Screen lights up and computer beeps but no nokia screen. Any Suggestions?

If nothing from this valuable resource works..you need to visit Nokia Care...

Similar Messages

  • Nokia E5 not starting after software update

    Hi 
    I today updated my software through wifi. after download, it tried to restart the phone and didnt restart at all. Its completely dead now. 
    Please help.
    Regards
    Lalit

    Hi lalit20,
    Welcome to Nokia Discussions.
    If your device does no longer switch on after updating through WiFi, try connecting the phone to Nokia Suite and see if you can reinstall the current software. You can do this by clicking on the green arrow in Nokia Suite, the option to reinstall the current software will be displayed in blue in the bottom of your screen.
    If the device does not respond after connecting it to Nokia Suite or you're not able to reinstall the software, please visit a Nokia Care Point where the phone can get looked at and sent for repair if necessary. 
    Let me know how you get on.
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • My C5 5mp not starting after software update

     Hi , need help.I was updating my nokia C 5 5 MP software update and during update got a call.  i didnot not answere the call but my software update gave me an error and disconnected my phone. Now my cell phone is not restarting. Wat shud i do. 

    Welcome to the Apple Support Communities
    It looks like you turned off the Mac during a firmware update. If you turned it off, the only solution is to take the Mac to an Apple Store to get the computer repaired, but first, as a last try, reset the SMC > http://support.apple.com/kb/HT3964

  • ITunes will not start after software update yesterday

    Using recent version of iTunes to manage my iPod Touch on a ThinkPad T400 with Win7 Pro 64-bit.
    I was offered a software update last night, and took it.  It appeared to install OK and required a reboot, which I performed.
    Now I cannot run iTunes at all.  In the Processes view of Task Manager, the iTunes process appears and then disappears without any kind of UI error message.
    I heve rebooted again.  I have downloaded the 10.4 installer from http://www.apple.com/uk/itunes/download/ and used the repair option.
    No good.  Rebooted.  No good.  The file version from Properties of iTunes64Setup.exe is 10.4.0.80 by the way.
    Stopped the Bonjour service.  No good.
    So now I cannot get my latest podcasts onto my iPod and I am extremely unhappy.
    Any ideas please?

    If you downgrade, uninstall Apple compatibility support also from Programs as that seems to be the crux of many issues, both with iTunes but also Safari.
    The other "crux" is that QT 7.7 and Safari 5.1 are security patches/updates deemed "critical/essential" category. Safari you can probably do w/o. iTunes is "dot zero" (10.4.0).
    iTunes: I am always doing this that bring UAC to blank the screen, and refuse to disable that security feature, but that also means iTunes video (music, movies etc) will also go blank.
    Other feature I have had with itunes is that it will go into a process thread lock wait state between video/movie and require a kill thread.
    In 5 yrs Vista/7 I've had more issues with Apple software than anything else bare none.
    Trouble installing Apple iTunes or QT Windows
    Removing Apple software components Windows
    iTunes Windows Troubleshooting security software issues
    Removing Apple Software Windows XP

  • FP Install Will Not Start after DLM Install

    The FP installation will not start after an apparent DLM installation.  The DLM appears to install and the control panel shows it is present, but the FP installation will not start.  There are no other messages that appear.  A restart and reinstallation attempt installs the DLM again, but still no FP install.  Using XP SP3 and IE 8.0.
    Thx

    Hi mont1228,
    The Adobe Download Manager (DLM) executes the Flash installer in "silent mode" so you shouldn't see a dialog box.  To confirm that Flash was installed successfully, go to http://www.adobe.com/software/flash/about/ and let me know if the animation doesn't appear.
    Best regards,
    Chris
    clechner//adobe

  • Windows 8.1 desktop PC not starting after hibernation

    Hi,
    I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
    and such but this new one is hard to figure out without a desciption.
    First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
    I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
    I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
    white text on blue background), I got to a black page with grayish text telling me the following:
    Windows Boot Manager
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your Windows installation disc [...]
    2. Choose your language [...]
    3. Click "Repair your computer."
    File: \Windows\system32\winload.exe
    Status: 0xc000000f
    Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
    It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
    Errors:
    1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
    2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
    I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
    I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
    Sorry if this post is a bit of messed up, that's about how I feel right now... :)
    Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
    Many thanks in advance.

    Hi,
    According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
    Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
    For Windows boot process knowledge, you can refer to the contents of the link below for more details:
    http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
    For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
    Roger Lu
    TechNet Community Support

  • Oracle 10g not starting after upgarde

    Hi,
       Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
    Description:
    The OracleDEV102iSQL*Plus service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.
    Cheers
    Murali

    Hi,
    I cannot explain what went wrong.
    The error indicate that the upgrade is not finished or an error happened during the upgrade.
    Please, review the alert log and the upgrade logs.
    There are some possibilities:                                                                               
    - First one is to finish the upgrade to Oracle 10.2 manually. Please,  check the Metalink notes:                                                                               
    Note 316889.1 - Complete checklist for manual upgrades to 10gR2   
        Note:420146.1 - What is the Best Way to Upgrade to 10g?                                                                               
    - Second option is to restore the database to a point before the  upgrade. In this case, you have to use the Oracle 9.2 software as  well and need to restart the upgrade from the beginning.

  • Windows could not start after SP-3 update

    Windows could not start after SP-3 update
    After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I used the power button to shut down Windows & then booted into Mac OS X normally.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
    Thanks for any help.

    Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
    Message was edited by: growler62000

  • Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

    I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
    I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
    I do not use a firewall or virus program.
    My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
    What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
    It is either a Ubuntu problem or a Firefox problem.
    Sonny.

    ''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
    Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
    The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • ITunes 10.1.2 not starting after update

    iTunes will not start after being updated to 10.1.2. Also experienced internet explorer being extremely slow. Tried to repair the installation, but same result. Uninstalled iTunes, restarted the computer, and internet explorer started working again. Reinstalled iTunes from Apple web page. Same result as after update. Everything worked fine before update, no errors during installation.

    I have just had exactly yhe same problem.
    Try this!
    Go to the itunes support page and uninstall / reinstall Itunes + quicktime exactly to the troubleshooting instructions.
    It takes some time and patience but it works on my Vista operating system. Windows 7 should also work as the instructions refer to both systems.

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • PC Suite 6.86.9.3 does not start after reboot

    Hi!
    I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
    But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
    The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
    Does any one have an idea how to solve my problem?
    Thanks
    Michael

    Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
    Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

  • My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

    My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
    I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

    here is link to the apple product feedback website:
    http://www.apple.com/feedback/

Maybe you are looking for