NAC SNMP MAC notification traps not being sent

I have the switch set up for mac notification, and the switch has the below config. But no mac notification traps get sent to the CAM.
interface GigabitEthernet1/0/24 switchport access vlan 800 switchport mode access snmp trap mac-notification added spanning-tree portfast!snmp-server community **** ROsnmp-server community **** RWsnmp-server enable traps snmp linkdown linkupsnmp-server enable traps MAC-Notificationsnmp-server enable traps stpx root-inconsistency loop-inconsistencysnmp-server host 10.101.90.20 version 2c **** snmp-server host 10.101.90.20 **** MAC-Notification snmp
Below is a debug of snmp packets when a host it connected to the switch on port 1/0/24
1y29w: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/24, changed state to up1y29w: SNMP: Queuing packet to 10.101.90.201y29w: SNMP: V2 Trap, reqid 62, errstat 0, erridx 0 sysUpTime.0 = 648642685 snmpTrapOID.0 = snmpTraps.4 ifIndex.10124 = 10124 ifDescr.10124 = GigabitEthernet1/0/24 ifType.10124 = 6 lifEntry.20.10124 = up1y29w: SNMP: Queuing packet to 10.101.90.201y29w: SNMP: V1 Trap, ent products.516, addr 10.202.1.2, gentrap 3, spectrap 0 ifIndex.10124 = 10124 ifDescr.10124 = GigabitEthernet1/0/24 ifType.10124 = 6 lifEntry.20.10124 = up1y29w: SNMP: Packet sent via UDP to 10.101.90.201y29w: SNMP: Packet sent via UDP to 10.101.90.201y29w: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/24, changed state to up
Am I missing something in the config or something?

Hello,
Please post your SNMP receiver config on the CAM. Also, can you do a capture on the CAM to see if you're seeing the packets getting there?
To do the capture, in a SSH session, use this command: tcpdump -ieth0 'host ' -s0 -wcapture.pcap
Once you've captured the success/failure, hit Ctrl-C to kill the capture. You can then use WINSCP or any other SCP program to get that file off of the CAM for further analysis.
HTH,
Faisal

Similar Messages

Mac-notification traps not sent

Our 6509 switch is not sending mac-notification traps to the NAC manager.
The linkup linkdown traps are working however the traps specific to mac-notification are not.
SNMP counters are not incrementing and a show mac address-table notification change indicates that there are no new notifications.
As a result, the NAC does not know the mac address of the switchport in order to process any rules.

Hello,
Please post your SNMP receiver config on the CAM. Also, can you do a capture on the CAM to see if you're seeing the packets getting there?
To do the capture, in a SSH session, use this command: tcpdump -ieth0 'host ' -s0 -wcapture.pcap
Once you've captured the success/failure, hit Ctrl-C to kill the capture. You can then use WINSCP or any other SCP program to get that file off of the CAM for further analysis.
HTH,
Faisal

Notifications are not being sent when Bulk Load is done

Hi All,
I have OIM 11g setup on my machine. I use the bulk load utility for loading the user data. Now in my OIM setup, the notifications are being sent for all stuff like Reset Password. New account creation and other. However when I bulk load the users, notifications are not sent to their mail ids. I am running the scheduled job "Bulk load Post Process" which is necessary so that the users are synced to the LDAP repository. I have the LDAP Sync option checked and also the Notifications option set to yes in this scheduled job. Though the users are loaded successfully and are synced properly, the notifications are not sent. Can some one please guide me as to what could be the problem here?
Thanks,
$id

The code is probably only called in the Event method of the event handler that sends the notification. You can check the mds files and find the notification you are looking for and then use a code decompiler to find the class that is called. You can then use this code as a sample, or write your own notification code and create an event handler that runs in the BulkEvent.
And on another note there is also this System Configuration Variable: Recon.SEND_NOTIFICATION which is set to FALSE by default.
-Kevin

Subscription / Notification emails not being sent

Hello all,
We are unable to get emails sent from KM through our Exchange server. We are using NW04 SP12. We have configured the EMAIL and INTERNET channels with the valid Exchange server, we have configured the Channel Originators with valid email addresses. I have successfully tested via telnet to the Exchange server from the Portal app server using the originator address.
The Subscription and Workflow Approval have been set up to use the EMAIL Channel, and I see the notifications arrive in the Notification iView, but no email gets generated. I see nothing in the log files to indicate an error. Also, the 'Send To...' does not generate emails either, although this appears to use the JavaMail Global Transport rather than the EMAIL channel.
Is there a way to test the EMAIL Channel after getting it configured?

Dirk,
Thanks for the logging suggestion, we're getting closer.
#1.5#0012798F816800680000000800000A100003FCF66A61D9F2#1122560207063#com.sapportals.wcm.service.notificator.wcm.NotificatorService#sap.com/irj#com.sapportals.wcm.service.notificator.wcm.NotificatorService.NotificatorService$Sender#Guest#19####3aa72f10ff7211d9afe50012798f8168#
Thread[com.sapportals.wcm.notificator.sender,5,system]##0#0#Error##Plain###java.lang.NoClassDefFoundError: javax/activation/DataSource
     at com.sapportals.wcm.util.channels.wcm.EmailChannel.newMessage(EmailChannel.java:198)
     at com.sapportals.wcm.util.channels.wcm.EmailChannel.sendTo(EmailChannel.java:498)
     at com.sapportals.wcm.util.channels.wcm.EmailChannel.sendTo(EmailChannel.java:463)
     at com.sapportals.wcm.util.channels.wcm.Recipient.sendTo(Recipient.java:528)
     at com.sapportals.wcm.service.notificator.wcm.NotificatorService$Sender.doSend(NotificatorService.java:418)
     at com.sapportals.wcm.service.notificator.wcm.NotificatorService$Sender.run(NotificatorService.java:642)
     at java.lang.Thread.run(Thread.java:534)
We apparently have an issue with the javax.activation.DataSource class. We have the Admins that did the install tracking it down now.
Also in response to Michael's post, I verified that we are at the latest and greatest for both KM / Portal. SP12 patch 3 (there are no patches for SP12 portal).

NAC can't receive SNMP mac notification

Hi,
Is SNMP mac notification for switch really works with NAC OOB deployment? We have been trying to test in a POC setup for NAC where the PC with NAC agent is connected behind a Cisco and Nortel IP phones. Once the PC is disconnected behind the IP phone the NAC manager can't received snmp mac notifcation from the switch hence, the user is not automatically removed on the online users or certified devices. Were using NAC version 4.6 and C3750 switch version 12.2(35)SE2 and 12.2(35)SE5. We know there is a bug related regarding mac notification on switch ios version 12.2(25)SEC2 or lower but on stack switches. But were using standalone switches only for the testing and higher IOS version. Hope someone could help me verify on this on what specifically ios version of switch is working properly with snmp mac notification?
Thanks!
Wendell

Just had it confirmed by Cisco Tac. The 12.2(50) version of code is the oldest which they say will work.
This is from the Release Notes of NAC 4.7 and seems to explain it:
Open Caveats NAC
CSCsr95757
No
CAM intermittently stops processing SNMP MAC notification traps from the switch.
This issue can occur on different edge switches. Once the problem is present, no further SNMP MAC notification traps are processed from the CAM for the switch in question.
Note: There is no perfigo-log0.log.0 information, but a tcpdump from a CAM CLI session indicates that the CAM is receiving SNMP MAC notification traps.
Workaround: To re-establish correct SNMP trap handling on the CAM, open a CAM CLI session and enter the following commands:
service perfigo stop
service perfigo start
The CAM immediately starts processing the SNMP MAC notification traps from the problem switch(es).
Note: After a period of time, however, this problem may appear again.
FYI, the workaround didn't help in version 12.2(46) code on a 4506.
Here is the bug information from CCO:
CSCsr84693 Bug Details
Incomplete MAC notification SNMP trap on 4500s
Symptom:
Incomplete MAC notification trap is seen in 12.2(46)SG. The trap is missing some
fields
4: Mon 08/04/08 20:30:54
sysUpTimeInstance = 0d 0:04:10.83
snmpTrapOID.0 = CISCO-MAC-NOTIFICATION-MIB!cmnMacChangedNotification
cmnHistMacChangedMsg.3 = 02
cmnHistTimestamp.3 = 0d 0:04:10.83
A complete traps looks like the following:
sysUpTimeInstance = 0d 0:07:14.16
snmpTrapOID.0 = CISCO-MAC-NOTIFICATION-MIB!cmnMacChangedNotification
cmnHistMacChangedMsg.2 = 01:00:01:00:11:00:22:00:33:00:47:00
cmnHistTimestamp.2 = 0d 0:07:14.16
Thus, in cmnHistMacChangedMsg attribute, the following fields are missing:
MAC Address
Dot1dBasePort
Conditions:
This problem is seen whenever a Mac notification trap is sent.
Workaround:
Use CLI "sh mac-add not change" in 12.2(46)SG.
Use a different software release; eg., 12.2(44)SG
Hope this helps.

Workflow Notification Mails Are Not Being Sent

Hi
we are running 11.5.10.2 version , some times Workflow Notification Mails Are Not Being Sent , so how should i start diagnose this issue.
Regards

Dear Hussein
thanks for your reply, below are the log messages from the todays file FNDCPGSC6854.txt
[May 12, 2009 1:21:12 PM AST]:1242123672450:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2LXZhNin2K0g2LXYp9mE2K0g2LnYrNmE2Kf
Zhg==?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 1:21:12 PM AST]:1242123672451:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 2:03:48 PM AST]:1242126228129:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:DAREB
S:172.30.2.45:-1:-1:UNEXPECTED:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.IMAPInboundProc
essor.moveMessage(Message, String)]:Unable to move message {null} -> javax.mail.StoreClosedException: *
BYE Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 closing connection due to timeo
ut.
[May 12, 2009 2:17:01 PM AST]:1242127021657:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2YXYp9ix2KrZhiDZgdmG2YrYsg==?= <mvi
[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 2:17:01 PM AST]:1242127021658:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2KfYtNix2YEg2KfZhNiz2YrYryDYp9it2YX
YryDYtNio2YQ=?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for clie
nt input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 4:03:08 PM AST]:1242133388437:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:UNEXPECTED:[fnd.wf.mailer.URLMIMETagListener]:oracle.apps.fnd.wf.mailer.URLMIMETa
gListener.editStyleRef(HTMLTagEvent, String) Making a connection to {http://oracle.kannon.com:8000/OA_
HTML/cabo/images/cache/cmbts.gif)} returned {404 - Not Found}. Leaving as a reference

Batch Process mail notifications not being sent

Racking my brain on this. On our prod 9.3.1 server, we reconfigured the mail server/database. I logged in as the application owner to establish the mail in application settings. Under workspace/administer/notifications I am able to successfully send a test email.
The emails are not being sent for any of our workspace reporting batch processes. What log would be associated with this for further review?
JTS

FR_GLOBAL_PROPERTIES didn't have the smtp server populated..once populated and then the scheduler service restarted the emails are working..
JTS

Disable SNMP mac-notification only for one snmp-server host

Hi,
we use NAC in our network and because of that I need the MAC-notification trap.
My problem is, the NAC needs that trap, but my network monitoring system doesn't.
Is it possible to disable only that trap for my monitoring?
For the NAC I use the following command to filter all other traps:
snmp-server host 192.168.1.1 version 2c public mac-notification
That works!
Is there something like
snmp-server host 192.168.1.20 version 2c public no mac-notification
to disable that mac-notification?
Thanks!
Sven

Hi Sven,
try using the syslog discriminator - I think it should be possible with this feature but I have not had the chance to play with it:
http://www.cisco.com/en/US/partner/docs/ios/12_4t/12_4t11/htnmsylg.html
and some interesting threads:
https://supportforums.cisco.com/message/3446512#3446512
https://supportforums.cisco.com/message/3340796#3340796
and others (search for "syslog discriminator")
Martin

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

EWA Report not being sent for two systems

Hi Experts,
We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
Issue is -
1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
2. The ECC report is coming ok, but Solution manager report is blank.
The places I checked the configuration -
1. SDCCN for all systems.
2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
4. Background Jobs related to the task including SM:EXEC SERVICES
Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
Solution manager report is being sent but empty.
Please suggest.
Regards,
Sabita

Hi,
what is your ST verison? check this note applicable or not
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
and chek the version of your service updated ST_SER too, patch this also solve the issue
refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
Jansi

Images not being sent with forwarded emails

Hi,
When I forward an email sent to me that has attached images, those images are not being sent when I forward the email.
Yes, I am being asked to "Include" the attachments, and I click the Include button.
I see the images in my message to be forwarded just before I send it, but the recipient does not get the images.
Any assistance would be appreciated.
Thanks

Posts: 26
From: New England
Registered: Oct 15, 2005
Forwarding Mail fails to include pictures
Posted: Nov 26, 2009 7:54 PM
Reply Email
Recently I've had a problem with my iPhone 3Gs when I forward an email that contains graphics. The graphic is fine on my iPhone but when it arrives the picture is missing. I am selecting 'include graphics'.
I've re-booted - no change.
I've restored from a backup - no change.
I've restored without using the backup - no change (other than I lost a couple email accounts etc.)
Anybody got any other suggestions?
TIA
Tim
Intel iMac / MacBook Pro Mac OS X (10.6.2) 80 gig Classic iPod, 32 iPhone 3Gs
wmdilson
Posts: 3
Registered: Oct 9, 2009
Re: Forwarding Mail fails to include pictures
Posted: Feb 14, 2010 9:31 AM in response to: Timothy Adams
Reply Email
I have been having the same issue since late September and been in touch with Apple support since. First they said they had no other reports on it so it was my phone. I started checking and found many other with the same issue. I called back and finally in November I was told they were aware of the issue and was working on it. The first week of January I called again and was told the update first week of February was going to correct this. I did the new software update and guest what....IT STILL DOESN'T WORK!!! It is now February 14th and I am on the phone once again for the same issue that was known back in October 2009. I am paying $30 for data plan that I can not utilize 100%. My question after being patient for 5 months is who is going to refund me a portion of my data plan? Apple or AT&T?? This is a software problem that really needs addressed. Apple just releases an iPAD and can't correct this email issue??
iPHONE 3gs iPhone OS 3.1.3
ernie goldstein
Posts: 177
Registered: Feb 1, 2005
Re: Forwarding Mail fails to include pictures
Posted: Feb 22, 2010 5:33 AM in response to: wmdilson
Reply Email
foward email
Posted: Jan 29, 2010 10:14 PM
Reply Email
i have the 32 g 3gs iphone. i have no problem when i send pictures from iphone from my photo album. the problem i have is when i receive a email on my phone that has pictures not from someones photo album and i foward the email the people get the email but not the picture. all they get is ca blank square where the picture should be. i even fowarded to myself and the samething happens on my mac . I have called teck support & was told they are working on it. this is unacceptable. it should not take this long to fix this.
imac Mac OS X (10.6.1)

Email not being sent because recipient %@ rejected

IN the past 12 hours all my emails are going to my outbox and not being sent. The error message I am getting is " The Reciepient "%@" was rejected by the server because it does not allow relaying" How does one fix this

This problem has nothing to do with her hardware or the Mail application.
If a message cannot be successfully sent for whatever reason, it will remain in the Outbox mailbox and not be sent.
A message moved to the account's Sent mailbox indicates the message was successfully sent by the SMTP server used to send messages with the account but is no guarantee the message will be delivered to the recipient's incoming mail server or be accepted by the recipient's incoming mail server.
Generally, this type of problem is at the recipient's incoming mail server - the recipient's incoming mail server may be blocking all messages received from the domain for the sender's email account/address (the portion of the email address after the @ sign or blocking a range of IP addresses for which the sender is included, etc.
The next place to check is the provider for the sender's SMTP server used to send messages with this account which is usually the email account provider but not always.
My .Mac account is my primary email account but I use my ISP's SMTP server to send messages with my .Mac account when connected to the internet at home - not .Mac's SMTP server.

Mail notifications are not getting sent from a Calendar client

Mail notifications are not getting sent from a Calendar client
<p>
On the client, after creating an event and electing to send a mail notification,
the following error appears in a pop up box:
"module:mailmsg.ctp,label 190, service error"
Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
error from the corresponding time that the client receives one:
DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
-> Request 0x443 for NodeId 10002,
status set to CANTSERVICE
Solution:
If this is only happening for one user, then check for the presence of a dbv.log
file in the /users/unison/log directory. If present this implies db corruption
and the /users/unison/bin/unidbfix tool should be run.
Note: For details on "unidbfix", please read the man page and also the online
Calendar Administrators Guide.

I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
so some problem they are having in emeryville today? I too am waiting for it to clear up.

Cc messages not being sent

I have just realized that mail messages I have been copying to people in the 'cc' header section of mail (version 2.1) are not being sent out. I use .Mac account.
Any thoughts?

Does not being sent out mean these messages remain in the Outbox?
If a message cannot be successfully sent, it will remain in the Outbox mailbox.
A successfully sent message will be placed in the account's Sent mailbox and a successfully sent message is either accepted or rejected by the recipient's incoming mail server.
If rejected by the recipient's incoming mail server for whatever reason, you will received a return email error message from the recipient's incoming mail server indicating why the message was not accepted.
If no such error message is received, this indicates the message was accepted by the recipient's incoming mail server and what happens to the message after that is beyond our control.

AC 5.3 Critical Action Alert Emails not being sent

HI:
We have set up Critical Action alerts for a couple of transactions and while the on-line alert logs are being generated correctly, the alert email is not being sent to the Risk Owner.
Does anyone know where I can trouble shoot this issue?
Thanks,
Margaret

>
Alpesh Parmar wrote:
> Margaret,
>
> Have you set up the SMTP server in visual admin? RAR needs to use this server details to send out an email.
>
> Alpesh
Hi AlpeshMargaret,
Where are the instructions for setting up the SMTP server in visual admin for the purpose of Alert Generation? I am not seeing this in the Configuration Guide. Could you point me to the correct documentation?
Thanks!
Jes

NAC SNMP MAC notification traps not being sent

Similar Messages

Maybe you are looking for