Nakisa Role
I colleagues,
I have a doubt about OrgChart 4.1 sp1 Nakisa authorizations.
We are planning to use SAP struct. authizations, We will use a no dialogue SAP user for the login connection string, and them each Nakisa user will use their own SAP user for access and show orgchart data. (depending Structural Authorization).
I would like confirm if all SAP user need add the OM_COMMON role with standard authorization objects or it only neccesary add OM_COMMON role for no dialogue SAP user for the login connection string? I suppose all user need the role, it´s right?
Regards
Albano
End users will need that role (or the permissions within it!) as each user's id is being used in each RFC call taking place.
See the Admin Guide regarding roles.
Stephen
Similar Messages
-
HR ABAP authorizations for Nakisa roles
Hi there,
We have just started to plan for ORG chart and Talent planning systems by naksia. Wondering if there are any
standard HR authorizations that the standard nakisa roles use and if anyone can elaborate if IT 008 (Basic Pay) really comes in to play with this as it is very sensitive. The project team has presented these user types:
Everyone, Executive,Assistant,HR(Human Resources), Manager
We are not using Structural auths but auth by PLOG, P_ORGIN
Any direction appreciated. Thanks !Hi Dan,
For OrgChart are you using Live or Staged?
There are no special auths required for OrgChart. A SAP role needs to be mapped to an ORgChart role in order for users to see certain data. No PA0008 data is shown by default in OrgChart, although obviously if you want to show it you'll need to make configuration changes to restrict display, depending if you are using Live or Staged. The roles you mention are standard OrgChart roles that come pre-defined out of the box.
For SuccessionPlanning (assuming you are on ECC6 EhP4) you need to have the Talent Management Specialist role (SAP_TMC_TALENT_MANA_SPECIALIST) assigned to each user and an Area of Responsbility assigned in HRTMC_PPOM. This is between the Position of the user and the OrgUnit of each area they are responsible for. No configuration is required in the application because, for SuccessionPlanning, it is really just an interface between the user and ECC data and leverages ECC security etc.
I hope that helps!
Luke -
Security and roles in Nakisa TVN
When a Nakisa role is mapped to an SAP role, does it limit the data that the person who is running that role sees? For example, if an employee logs in and is assigned a "Employee" role, is it possible to limit the org chart that the employee sees to only his org unit and below?
Hi there,
This depends on which architecture you are using, Live or Staged. In Live OrgChart uses SAP structural authorizations and therefore the user only sees what data they can see in SAP. In the Staged version you have to build roles and map SAP roles to them. In STVN2.1 OrgChart there are 5 pre-configured security roles available out of the box, which do include a "derives and below" security role ("Derives and Below" allows a user to see information about objects in the structure below them).
It is possible through configuration to allow a logged-in user to start at their location in the structure and also to prevent them from navigating up the structure. This configuration can be very complex and requires full knowledge of configuration of authentication as well as authorisation (ie roles) in order to achieve what you want. It is also possible to limit data fields and fields in the search etc through less complex configuration and if you're really clever you can customise the application in order to do things based on particular roles (like display a pop-up message at login etc). However, that takes a thorough knowledge of how the application works to achieve and only few consultants outside of Nakisa and provide that level of customisation.
I hope that helps.
Luke -
Hi,
we have created users in SAP R/3 and loging in to Nakisa with User ID and Password option (2nd Option).
What are the specific authorizations and roles we need to assign to the Manager and Employee.
Can we user ESS/MSS roles or we need any specific authorizations for Nakisa?
Thanks
ChanduHi Luke,
Can you be more precise as to what you mean by "You need to map the roles to roles created in Naksia" . I mean how do we do that.
Right Now, We have OrgModeler in a live connection mode. And we have connected Nakisa with SAP using Userid\Password Method. Whenever we try to login using an SAP userid in NAKISA, the entire hierarchy is visible to the user in Org Chart,right from the top-level. This is not what we want.
Tried to look for documents related to this , but couldn't find any.
Is the view to Org-Chart controlled through roles in SAP, if yes what is the simplest way to control the Org-Chart view through roles in SAP.
Also as seen in the current setup, The Auth. Obj S_RFC is sufficient for a SAP User to login into Nakisa and view the Org-Chart structure.
Any help would be appreciated in this regard.
Thanks -
Nakisa TF & SP : Read-only Roles
Hi Experts,
I am currently using Nakisa SuccessionPlanning 3.0 SP1 0701027700 and Nakisa Talent Framework 3.0 SP1 0701021700.
My question is, the user currently can log in to TalentFramework and SuccessionPlannning to display & maintain data.
Is it possible to setup a role that can be assigned to a group of user, so that they are only allowed to display the data (read-only) and not allowed to maintain it?
Please help to give some insight on this.
Thanks,Hi Aimey00,
For the STVN solutions the authroizations are all controlled in the backend. I would recommend speaking to a consultant with experience of authorizations who can help you restrict this data access.
In theory you could introduce application security roles to do this, but the effort required would be significant and would require a great deal of customizing. I recommend going through the backend authorization approach.
Best regards,
Luke -
Dynamic rooting (User Record) setting is not working in Nakisa OrgChart SP3
Dear All
The Dynamic rooting setting is not working in the Nakisa OrgChart SP3.
It is giving an error message - "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date."
We followed the same steps as given in the Admin guide of SP3 (P.no. 109 - shown below)
In Orgchart --> General Settings:
* Select the Org chart root value source.
User Record: Retrieves the record specified in the next step from the employee data element.
*Do one of the following to define the org chart root:
If User Record was selected in the previous step, select the field containing the ID of the required organizational object in the employee data element from the User record field drop-down list. For example, if you wish to root the org chart at the org unit of the logged-in user, select the field containing the org unit ID. Hence, we have selected the Org unit ID.
Note:
We had enabled single sign-on with logon tickets
Retained the standard settings in Security Settings --> Employee Source
Had provided full authorization to the roles
If we use the "OrgChart Root" option available in 'Orgchart root value source', the org structure gets displayed correctly from the root object defined.
As this is an standard functionality, Kindly guide us in resolving the issue.
Regards
RavindraRavindra.
You don't have to and shouldn't always include the username and password parameters for the SAP Connection string. When you omit them it will use the user's login credentials.
Remember though that:
The SAPRoleMappingConnection will need them included in order to get the details for the user in the first place.
Without the username and password specified in a connection string you can't click the option to test the connection and result in a successful connection. Remember unable to connect does not necessarily equate to wrongly configured.
I've filtered the log file for errors and the following entries were flagged up:
26 Jun 2012 10:00:06 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:13:52 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:43:49 ERROR com.nakisa.Logger - java.lang.reflect.InvocationTargetException
26 Jun 2012 13:55:09 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 14:32:03 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:48 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
At the very least it looks like SAPPositionVacancyDataElement is missing and whilst the other errors around it are unfamiliar I wonder if it might be a good first step to see if you can track down the reference to and existence of this data element? That being said it looks like your last test occurred well over an hour after this (so you may have already resolved it) and resulted in nothing but information messages. If that is the case it might be worth "rolling" your log file or manually trimming it to the right time frame when posting it? Otherwise it can be misleading as people could flag up issues you have already resolved.
So assuming you haven't tried Luke's suggestion (which should only take a couple of minutes to do) I think you should go back and do so right away .
Regards,
Stephen. -
Nakisa OrgChart STVN 21 JAVA Connectivity issue with ECC 6.0 Ehp4
Dear Nakisa,
We have deployed Nakisa component with following steps:
1. Java component OrgChart21 TalentOrgChart21_16.sca on SAP Netweaver CE 7.1 Ehp1.
2. applied Nakisa "STVN21_Addon_NW701.SAR" and "STVN21TP_OCOMECC60_1_1.zip" on SAP ERP 6.0 Ehp4.
3. Created SSO connectivity between NWCE and ERP 6.0 Ehp4.
5. Applied Nakisa License on portal using following URL:
http://coe-lba-asd1.group.coe:57000/OrgChart/manager.jsp
6. We have provided security settings entries without role mapping and getting following issues while accessing Nakisa user portal:
404 Not Found
SAP NetWeaver Application Server 7.11 / AS Java 7.11
Error: The requested resource /default.jsp is not available
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: File [default.jsp] not found in application root of alias [/] of Java EE application [sap.com/com.sap.engine.docs.examples].
Now we would require implement connectivity between Nakisa JAVA component and ERP 6.0 Ehp4. Please help us with its procedure.
Regards,
RajHello,
The connectivity if I understand you correctly is based on the Connection String.
Please refer to the page 33 "Setting the Authentication Source" on the Administrator Guide for STVN2.1.
An example of connection string would be:
ASHOST=SAPTWO SYSNR=02 USER=gsmith PASSWD=PWD1234 CLIENT=800
Cheers,
Bentow. -
SAP Authentication error in Nakisa 3 SP1
Hi,
I have uploaded the serial key and performed the below steps as per the Admin guide for sucession planning
Test the required data connections in the Data Center (configured SAp connection)
Verify the security authentication settings (for login screen)
Ensure the required modules are enabled
but when I am trying to login to below URL using the admin user, I am getting the error.
user used in the string have SAP_ALL, SAP_New, S_RFC (service user type)
http://hostname:port/SuccessionPlanning/default.jsp
289. 25 May 2011 09:41:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User to authenticate admin
290. 25 May 2011 09:41:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication provider SapStandard
291. 25 May 2011 09:41:55 ERROR com.nakisa.Logger - Sap Authentication : Name or password is incorrect (repeat logon)
292. 25 May 2011 09:41:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Login process finished with errors
293. 25 May 2011 09:41:55 INFO com.nakisa.Logger - Strings.decodeURIComponent , encoded=admin , decoded= admin
294. 25 May 2011 09:41:56 INFO com.nakisa.Logger - Tenant ID: 000
295. 25 May 2011 09:41:56 INFO com.nakisa.Logger - LoginSettingsObject Load: 9
296. 25 May 2011 09:41:56 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Credential provider ActiveDirectory
297. 25 May 2011 09:41:56 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User to authenticate null
298. 25 May 2011 09:41:56 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication provider SapStandard
299. 25 May 2011 09:41:56 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Login process finished with errors
I have also created a user ro_splan but not sure if we have map any role and how. please advice,
Regards,
SagarHi Luke,
I dont have SettingsResources and .delta directories under the build directory. Below is the list of files under that diretory.
/Nakisa/SuccessionPlanning/servlet_jsp/SuccessionPlanning/root/.system/Admin_Config/SuccessionPlanning: ls -altr
total 128
-rw-rr 1 <SID>adm sapsys 4282 May 20 17:05 UserControlResources.xml
drwxr-xr-x 2 <SID>adm sapsys 256 May 20 17:05 Themes
drwxr-xr-x 3 <SID>adm sapsys 4096 May 20 17:05 TemplateXML
-rw-rr 1 <SID>adm sapsys 11625 May 20 17:05 SettingsResources.XML
drwxr-xr-x 2 <SID>adm sapsys 256 May 20 17:05 Security
drwxr-xr-x 10 <SID>adm sapsys 256 May 20 17:05 Root
drwxr-xr-x 2 <SID>adm sapsys 4096 May 20 17:05 Picture
drwxr-xr-x 3 <SID>adm sapsys 256 May 20 17:05 OTFSchema
-rw-rr 1 <SID>adm sapsys 6397 May 20 17:05 ManagerResources.xml
-rw-rr 1 <SID>adm sapsys 191 May 20 17:05 LangModifications.xml
-rw-rr 1 <SID>adm sapsys 4455 May 20 17:05 InterResources.XML
-rw-rr 1 <SID>adm sapsys 122 May 20 17:05 BuildInfo.xml
drwxr-xr-x 8 <SID>adm sapsys 4096 May 20 17:05 Authentication
drwxr-xr-x 27 <SID>adm sapsys 4096 May 20 17:05 AppResources
drwxr-xr-x 2 <SID>adm sapsys 256 May 25 08:42 ___000___SuccessionPlanning
drwxr-xr-x 4 <SID>adm sapsys 256 May 25 08:42 ..
drwxr-xr-x 11 <SID>adm sapsys 4096 May 25 08:42 .
Regards,
Sagar -
Nakisa 4.1 - TalentHubHRExec missing masterBuild.sys does not exist
Dear Gurus,
I'm not able to do searching using employee on Nakisa TalenHubHRExec using employee listing anda position listing on data grid list.
I check from cds.log show missing masterBuild.sys does not exist, appreciate if can advise where should i get the file.Below i capture 2 error from the log, i already follow based on NakisaAdmin guide for Role Authorization Mapping using NakisaAdminConsole.
Error 1
04 Mar 2014 11:49:13 ERROR com.nakisa.Logger - Strings : readFile : java.io.FileNotFoundException: File 'NakisaPath\apps\Nakisa\TalentHubHRExec\servlet_jsp\TalentHubHRExec\root\.system\Admin_Config\__000__TalentHubHRExec_TF\masterBuild.sys' does not exist
04 Mar 2014 11:49:13 ERROR com.nakisa.Logger - java.io.FileNotFoundException: File ''NakisaPath\apps\Nakisa\TalentHubHRExec\servlet_jsp\TalentHubHRExec\root\.system\Admin_Config\__000__TalentHubHRExec_TF\masterBuild.sys' does not exist at org.apache.commons.io.FileUtils.openInputStream(FileUtils.java:137)
Error 2
04 Mar 2014 11:53:33 ERROR com.nakisa.Logger - com.nakisa.manager.ui.subucs.RoleMapping : getRolesDataSet : Error with roles DataSet. Connection String: ASHOST=NakisaHost SYSNR=00 CLIENT=100 USER=firhasa PASSWD=passwd
04 Mar 2014 12:02:24 ERROR com.nakisa.Logger - RoleMapping_SAP.MapRoles() : Message: while trying to invoke the method com.sap.mw.jco.JCO$Function.getImportParameterList() of a null object loaded from local variable 'function'
Regards
Mohamad Firhad SamuriHi Mohamad,
Your cds logs shows different errors however i have few questions here in terms of troubleshooting.
1. Any search listings worked earlier or it never worked ?
2. Have you properly imported the abap add-ons and transport pack ?
3. Do you have any customizations in listings ?
4. TREX is working fine, please confirm with Basis
5. Have you imported and exported the build ?
Dipak Bujjad -
Nakisa 4.1 - Org Chart does not display
Hello gurus,
I do have an issue with our fresh implementation of SOVN 4.1 (Org Chart, Build 0911012400, SAP_live build). I did set up the authentication to Logon Screen, and configured the org chart settings (very basic). I did not set up any Role mapping. My connection strings all have the same parameters, including the RFC username and password. They all test succesful.
When I log in the frontend, I get the famous message: "Cannot find the root of your orgchart. The orgchart box may have been deleted or
incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date. "
I did a capture of the log, and there is an error in the RFC wizard code, it seems:
7. 24 Apr 2014 08:06:25 INFO com.nakisa.Logger - Tenant ID: 000
8. 24 Apr
2014 08:06:25 INFO com.nakisa.Logger - LoginSettingsObject Load: 19
9. 24 Apr
2014 08:06:25 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn :
Credential provider ActiveDirectory
10. 24 Apr 2014 08:06:25 INFO
com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User to
authenticate znakisa_org
11. 24 Apr 2014 08:06:25 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication provider SapStandard
12. 24 Apr 2014 08:06:25 INFO com.nakisa.Logger -
com.nakisa.framework.login.Main : LogIn : User authenticated znakisa_org
13.
24 Apr 2014 08:06:25 INFO com.nakisa.Logger - com.nakisa.framework.login.Main :
LogIn : Authentication row is null
14. 24 Apr 2014 08:06:25 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User population provider is Database
15. 24 Apr 2014 08:06:25
WARN com.nakisa.Logger - Configuration merge warning: : Right configuration is
null - Merge skipped!
16. 24 Apr 2014 08:06:25 INFO com.nakisa.Logger
- ApplicationConfigurationManager:mergeConfigurations 0
17. 24 Apr 2014 08:06:25 WARN com.nakisa.Logger -
Configuration merge warning: : Right configuration is null - Merge
skipped!
18. 24 Apr 2014 08:06:25 INFO com.nakisa.Logger -
ApplicationConfigurationManager:mergeConfigurations 0
19. 24 Apr 2014 08:06:25 ERROR com.nakisa.Logger -
com.nakisa.integration.sap.manager.SAPConnector_RfcWizard :
java.lang.NullPointerException: while trying to invoke the method
com.sap.mw.jco.JCO$Function.getImportParameterList() of a null object loaded
from local variable 'function'
20. 24 Apr
2014 08:06:25 ERROR com.nakisa.Logger - java.lang.NullPointerException: while
trying to invoke the method com.sap.mw.jco.JCO$Function.getImportParameterList()
of a null object loaded from local variable 'function'
21. at
com.nakisa.integration.sap.manager.RfcWizardIntegrationClassParameterSetter.setParameters(RfcWizardIntegrationClassParameterSetter.java:25)
22.
at
com.nakisa.framework.data.commandProcessor.impl.sap.BaseFunctionProcessor.call(BaseFunctionProcessor.java:104)
23.
at
com.nakisa.integration.sap.manager.SAPConnector_RfcWizard.getDataSet(SAPConnector_RfcWizard.java:50)
24.
at
com.nakisa.integration.sap.manager.RfcWizardIntegrationClass.getDataSet(RfcWizardIntegrationClass.java:106)
25.
at
com.nakisa.framework.data.commandProcessor.impl.sap.BaseFunctionProcessor.getDataSetFinal(BaseFunctionProcessor.java:120)
Would you happen to know what is the issue here?
Thank you for your help!
M.E.Hi Matthew,
How about the directory search function ? Does it work ?
I would follow below troubleshooting steps.
1. Validate If Transport Pack and ABAP Add-on are installed properly
2. Restart the Nakisa application and check
3. Check If User ID has correct authorizations in SAP
4. Check If Data is correct
5. Do the RFC trace
Regards,
Dipak Bujjad -
New to Nakisa - Talent management module
Hello Experts,
I got good experience working in ESS/MSS, eRec, PMS modules
But now i wanted to learn on Business Package Talent Management and Nakisa tool and looking for some trainers or any kind of materials.
I hardly find any guidance too
Also i am being a functional consultant how to start with and will learning Nakisa help me. Also for learning Nakisa does we require technical knowledge or functional part is enough? Pls help me to understand where and how to start with in the areas of Using Nakisa for SAP HCM module
Hope for the inputs
Regards
VijayHi Vijay,
For information on the Business Package for Talent Management Portal role see here:
[http://help.sap.com/erp2005_ehp_04/helpdata/en/a4/efdae793364ab3b0286319c9989846/frameset.htm]
for information on Talent Management and Talent Developlent see here:
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/3f/6efcf555334d9e981c36e253dc2aec/frameset.htm]
For SVSN there are no guides available. To see a functional overview of functionality you can watch one of the videos on the Nakisa YouTube channel:
[http://www.youtube.com/user/Nakisainc]
My approach towards learning about SVSN is to start with the functional features of each application. Then I would then learn the technical side of the application so you are aware of the configuration and customizing capabilities - this is important to be able to blueprint a suitable solution for your clients. It is worth taking a technical training course with Nakisa as these show the functional and technical aspects of the applications and focus on SP1. The information you get here cannot be obtained elsewhere. Then you just need lots of time to study the application and, most importantly, do some implementations! You can also work with Nakisa on implementations to begin to gather some knowledge.
Good luck!
Luke -
Nakisa OrgChart Detailed View in VSN30 SP2
Hi Experts,
In Nakisa OrgChart, I cannot see the detailed view of each Org.Unit in the right pane with SSO.
Also I did the role mapping. But still unable to view the details. Also I used default roles (Manager), but still unable to view.
But in anonymous acces I can see the detailed view of each OrgUnit.
Regards,
Xavier.Hi Xavier,
For Anonymous mode you will see what the user assigned to access data sees, but when you use authentication you only see what your user is authorized to see. Therefore it could be correct that aith Anonymous you see everything but with authorization you see much less. Is your user for Anonymous access different to your user?
Do you have authorizations to see the data displayed in the details panel? If you login with a user that has SAP_ALL (assuming your user doesn't have SAP_ALL) do you see anything or is it the same?
You won't see View in Analytic Profile or any analytics in Anonymous because these items are secured to application security roles and these aren't used with Anonymous authentication.
The log updates in real-time. You can select the latest log in the Log Viewer - it will just be called cds.log and doesn't have the date in the name. The log name changes to the date when a new day starts. You can also access the log in the file system under the Log folder.
Best regards,
Luke -
Hi SAP Techies,
I am getting the following error while generating a role,
"18 field value(s) for object K_CCA were not entered in the profile"
Can you please provide me a solution to fix this problem.
Thanks.
Regards,
AgustussHow many cost centres are you putting in the role? Do you have cost centre set as an org level?
From your User Name I assume that you are at the BBC...Do you still use a program to populate the cost centres in the role based on the cost centre group names? If so it is possible that you are trying to put too many cost centres in the field and the the profile will not generate because of this (we had it back in 2001 when I was working there).
Do you have the technical error message details? -
Cannot send email from Powershell on Mailbox Role
Hi,
I am trying to send an email from Powershell on Mailbox role of Exchange server. I have installed Symantec Mail Security on Mailbox Role.
When I try to send email using Powershell, I got the following error.
PS C:\a> Send-MailMessage -to [email protected] -Subject "Alert Closed.. Service is restarted on Computer" -from
[email protected] -Body "The service was found stopped on Computer it was started automatically and it is now running normally." -bodyasHTML -priority High -SmtpServer smtp.domain.com
Send-MailMessage : Service not available, closing transmission channel. The server response was: 4.3.2 Service not active
At line:1 char:1
+ Send-MailMessage -to [email protected] -Subject "Alert Closed.. Service is ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpException
+ FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage
This command is working fine on every server except exchange server (CAS, Mailbox). Firewall is off on the servers.
Any help will be highly appreciated.
Regards,
AneesHi,
Please check the similar thread .
http://social.technet.microsoft.com/Forums/exchange/en-US/ef699832-8da9-4709-9a50-c6223b13bd95/sendmailmessage-returns-the-server-response-was-432-service-not-available?forum=exchangesvrsecuremessaginglegacy
smtp server (smtp.domain.com) is rejecting the connection from the
Mailbox role of Exchange server.
So please allow the mailbox server ip address on the smtp server's (i.e. smtp.domain.com)
receive connector to get it done
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
How to get security roles in a JSF portlet
I need to get the LDAP user-roles available in the Sun Portal Server 7 in my JSF-168 portlet.
I've added the mapping file, updated the portlet.xml and web.xml, deployed the portlet (psconsole). But the portlet shows the "content not available" error with javax....title title.
I've probably messed up the descriptors, but I don't see what is wrong. Here they are:
roleMaps.properties
cn\=VSM.Administrator,dc\=neco,dc\=cz=Administrator
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4">
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>server</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/navigation.xml,/WEB-INF/managed-beans.xml</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>false</param-value>
</context-param>
<filter>
<filter-name>UploadFilter</filter-name>
<filter-class>com.sun.rave.web.ui.util.UploadFilter</filter-class>
<init-param>
<description>
The maximum allowed upload size in bytes. If this is set
to a negative value, there is no maximum. The default
value is 1000000.
</description>
<param-name>maxSize</param-name>
<param-value>1000000</param-value>
</init-param>
<init-param>
<description>
The size (in bytes) of an uploaded file which, if it is
exceeded, will cause the file to be written directly to
disk instead of stored in memory. Files smaller than or
equal to this size will be stored in memory. The default
value is 4096.
</description>
<param-name>sizeThreshold</param-name>
<param-value>4096</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>UploadFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>ExceptionHandlerServlet</servlet-name>
<servlet-class>com.sun.errorhandler.ExceptionHandler</servlet-class>
<init-param>
<param-name>errorHost</param-name>
<param-value>localhost</param-value>
</init-param>
<init-param>
<param-name>errorPort</param-name>
<param-value>25444</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>ThemeServlet</servlet-name>
<servlet-class>com.sun.rave.web.ui.theme.ThemeServlet</servlet-class>
</servlet>
<servlet>
<description>Generated By Sun Java Studio Creator</description>
<display-name>CreatorPortlet Wrapper</display-name>
<servlet-name>VSMPortal</servlet-name>
<servlet-class>org.apache.pluto.core.PortletServlet</servlet-class>
<init-param>
<param-name>portlet-class</param-name>
<param-value>com.sun.faces.portlet.FacesPortlet</param-value>
</init-param>
<init-param>
<param-name>portlet-guid</param-name>
<param-value>VSMPortal.VSMPortal</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>ExceptionHandlerServlet</servlet-name>
<url-pattern>/error/ExceptionHandler</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ThemeServlet</servlet-name>
<url-pattern>/theme/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>VSMPortal</servlet-name>
<url-pattern>/VSMPortal/*</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>faces/null</welcome-file>
</welcome-file-list>
<error-page>
<exception-type>javax.servlet.ServletException</exception-type>
<location>/error/ExceptionHandler</location>
</error-page>
<error-page>
<exception-type>java.io.IOException</exception-type>
<location>/error/ExceptionHandler</location>
</error-page>
<error-page>
<exception-type>javax.faces.FacesException</exception-type>
<location>/error/ExceptionHandler</location>
</error-page>
<error-page>
<exception-type>com.sun.rave.web.ui.appbase.ApplicationException</exception-type>
<location>/error/ExceptionHandler</location>
</error-page>
<jsp-config>
<jsp-property-group>
<url-pattern>*.jspf</url-pattern>
<is-xml>true</is-xml>
</jsp-property-group>
</jsp-config>
<security-role>
<role-name>Administrator</role-name>
</security-role>
</web-app>
portlet.xml
<?xml version='1.0' encoding='UTF-8' ?>
<portlet-app xmlns='http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd' version='1.0'>
<portlet>
<description>Created By Java Studio Creator</description>
<portlet-name>VSMPortal</portlet-name>
<display-name>VSMPortal Portlet</display-name>
<portlet-class>com.sun.faces.portlet.FacesPortlet</portlet-class>
<init-param>
<name>com.sun.faces.portlet.INIT_VIEW</name>
<value>/Uctarna.jsp</value>
</init-param>
<expiration-cache>0</expiration-cache>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
</supports>
<supported-locale>en</supported-locale>
<portlet-info>
<title>VSMPortal</title>
<short-title>VSMPortal</short-title>
<keywords>Creator</keywords>
</portlet-info>
<security-role-ref>
<role-name>Administrator</role-name>
<role-link>Administrator</role-link>
</security-role-ref>
</portlet>
</portlet-app>If I don't use the security-role and security-role-ref tags, the portlet works, and the isUserInRole method obviously doesn't.Nobody uses the LDAP roles in a portlet? Anybody knows other thread discussing similar issue (I can't find anything)?
Maybe you are looking for
-
Upgrading OIM 9.1.0.1 to 9.1.0.2 BP07
Hi All, I am trying to upgrade the OIM 9.1.0.1 which is installed on weblogicserver 10.3 to OIM 9.1.0.2 BP07 with application server 10.3.2 on windows machine. First i tried to upgrade the OIM to 9.1.0.2.In upgrading this i did the following steps: 1
-
XML Output from Concurrent Request DBMS_XMLGEN
I am trying to create xml output for a concurrent request, using the DBMS_XMLGEN package to generate my XML? I have gotten so far as to be able to run my procedure and see the output in TOAD using dbms_output.put_line, but I can't seem to quite get t
-
Not able to download itunes 10.5..says file ja.lprog is corrupted (its empty) and error code 2330. Not able to download/install on another drive...even external drive-same reason given. Not able to uninstall itunes to reinstall...same reason given.
-
Opinion: What you do NOT like in Arch Linux?
Hello, I saw many topics about opinion of Linux and many like "why you have switched to Arch" but there was no topic about complaints. I know that most of Developers would not like to see topics like that but it is needed to improve this great di
-
Hi experts, I would like to have the TAB key blocked for certain fields in documents. The reason for this is that I want to filter permanently, for example, the customer list for the Sales Order. My idea is to create a FMS query and link this field t