Name EE Grp EE SGrp Per Area & Cost Center tab disappered from PA 30 Screen

Hi Guru,
I have created the shift schedule for new company code and then moved it dev (No chng) for testing and hired an new employe on same company with new shift schedule. And as soon as execute PA 30 screen to see the master data emp namd , EE grp , EE sgrp , pers area an cost center tab has disappeared.
Please tel me wht went wrong or wht wil be possible cause for this error.
Rgds
Subrat

Here it is, sorry for the delay, I kinda gave up for a while:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP5"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "PreferredMode" "1920x1080"
EndSection
Section "Monitor"
Identifier "0-DFP10"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "3600 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "PreferredMode" "1920x1080"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
Option "PreferredMode" "1680x1050"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP5" "0-DFP5"
Option "Monitor-DFP10" "0-DFP10"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 5520 1920
Depth 24
EndSubSection
EndSection
Last edited by xeekei (2013-09-12 22:47:09)

Similar Messages

Cost Center data Extraction from R/3

Hello,
I am using extractor 0CO_OM_CCA_1 to get CO data into BW-BPS. After examining the resulting data into BW, I have a a problem: The customer uses movement types JVIV, RKIV, RRIV in R/3 for some of their cost centers, and they want those movements to be excluded from the extraction. However, I can see no valid filtering possibilities at the extractor....
Do you know how I could make this filtering?
Many thanks in advance for your help,
Eduardo.

Hi Gianfranco, thanks for your reply
I am stuck at this point because when data is extracted from R/3 into BW, there is a "conversion" for such "movement types", in which the system maps those values I mentioned from table COSP_VTYPE in R/3 into something like the following in BW:
Table RSTVTDETAIL:
VALUETYPE MEASTYPE VTDETAIL TXTSH                TXTMD
010       001000   01       Primary Costs        Primary Costs
010       001000   02       CO-Transfer          CO-Transfer
010       001000   03       CO-Allocations       CO-Allocations
010       001000   04       CO-Activ. alloc.     CO-Activity allocations
010       001000   05       CO-Settlement w act. CO-Settlement with activity flow
010       001000   06       CO-Settl. wo act.    CO-Settlement without activity flow
The problem is, I cannot find a correspondent value for those JVIV.. from R/3, and thus, all data is displayed as a total. What I intend is to separate entries related to those COSP_VTYPE values and exlude them from budgetting...
The final objective for this one is (I will try to explain it without a specific technical knowledge of financial vocabulary), that It is a requirement that imputations to a cost center that come from other cost centers, are not displayed for the former.
Any help will be appreciated. Thank you very much in advance
Regards,
Eduardo.

Dept as Pers.Subarea & cost center at Dept level

Hi Experts,
I have a requirement where we have major cities as main locations & there are various departments which are located at this location level.
Can I in this situation make the main location as the Pers.Area & the depts. as PerSubarea.
At the same time client wants to capture the cost at Dept level so in OM,can I attach a cost center at Dept level or SubOrg unit will inherit the superior OrgUnit cost center. will it provide me with the Dept level costing.
Will it be best a practice.
Comp Code-AG01
Location-Mumbai- Sales, HR,Operations
Delhi- Sales International, Marketing, Corporate IT.
Will I be able to track the cost at Dept level.
Please guide..Thanks

Hi Thanks for putting your details.
Now we are exploring another option of Putting the Dept as Personnal Arae & the location as Sub Area.
Please guide me whether it will be in the right direction.
Dept- Software Dev- which has multiple locations across country-Pers.Area
Then under this Bhubaneswar,Mumbai,Delhi-SubArea.
Bhubaneswar- Sales,Distribution,Marketing.,HR.
Now all the depts will have cost centers assigned at SubOrg level but in that case will the Master cost center at the main organization level Software- Will it carry all the sub organization cost.
The HOD should be able to get the entrie cost of all the dept under Software Dev.
Is there any report which will provide the costcenter-cost posted to it.
Organization starcture wie
CompCode-
Software Dev-Persarea
Location-Subarea
SoftwareDev-Head Org Unit under the group compcode
location-Bhubaneswar,Mumbai,Delhi
Depts- Sales,Distribution,Marketing,HR
Sub Dep-Sales-Inside sales & Presales,Marketing-Domestic/Internation.
In all these cases can i capture the ORg Stracture & how the reporting & report generation will haapen with such.
Please guide.

Business Area - Cost Center - Urgent

Hi,
I have encountered a problem with business area wise document splitting. I have selected business area wise document splitting after posting values in the cost centers. now I need to assign business area in the cost center master data. Because of the cost center is having values, it is not allowing me to assign business area in the master data. Now i want assign business area in the cost center master.
And in Cost Center Master Data the Business Area Feild is mandatory field, thats why it is not allowing me to change the period and to create a new cost center with the same CC No.
Pls help me out in this regard
Thanks in Adance
Raveendra

Hi,
try to run the following ABAP: RKACOR06 It allows you to change the business area in the cost centre master.
Hope that helps, points welcome
Csaba

Business Area-Cost Center error while doing VL09 (PGI Reversal)

Hi Friends,
Kindly go through the "ERROR" message and "IMPORTANT" point as mentioned below:This is happening while reversal of PGI in VL09.
IMPORTANT: Just to make you aware, the cost center in error (CONSDSPL) was nowhere assigned in FS00 or OKB9. Also to state that at the time of this error some different cost center was assigned in FS00 which was having business area SUGR. So PGIs are picking up two business areas i.e. 1.DSPL (from Plant-Division-BussA setting) & 2. SUGR (for P&L GL from FS00)
Following error coming while doing PGI reversal:
ERROR -
> BAL1/CONSDSPL CTR belong to business area DSPL not SUGR
Message no. KI188
Diagnosis
Account assignment object BAL1/CONSDSPL, type CTR is assigned to business area DSPL. You made an explicit assignment to business area SUGR.
System Response
The posting row may contain only one business area.
Procedure
Perform one of the following actions.
Make an explicit assignment to business area DSPL. To do so you must set the "Business area" field as entry-ready in Customizing.
Enter an account assignment object assigned to business area SUGR.
Change the assignment of BAL1/CONSDSPL to business area DSPL. Note the document number and continue processing the document after changing the assignment.
PLEASE GUIDE. NEEDED ANSWER BADLY.

Business area filed in cost center CONSDSPL is DSPL (what it should be). In this scenario, they have assigned SGPRODCTN cost center in GL master wherein business area is SUGR.
That means, when accounting entry is getting generated, it will show two business areas. One will be fetched from "Plant-Division-BussA" setting (SPRO) & the other from GL. Also to make you aware that here the business area should be DSPL, but since they assigned wrong cost center in GL master, the entries are going to SUGR as well.
Most important thing to notice out here is that when this error came "no default account assignment was done through OKB9" The cost center showing in error viz. CONSDSPL was nowhere assigned. So the question is from where the system is fetching this cost center?

Adding cost center in RABEST_ALV01 from ANLZ node - ADA Logical database

Hi,
I am trying to display cost center in output list of RABEST_ALV01 ALV report (Copied it to ZRABEST_ALV01).
I was able to include fields which are there in ANLAB and ANLAV in FIAA_SALVTAB_RABEST structure - CI_REPRABEST inlcude. And have included cost center field also in the include (KOSTL).
This ALV report RABEST_ALV01 is reffering to ADA logical database. I included a node explicitly in the program along with other node declaration :
NODES: anla0,
             anlav,
             anlz ,
             anlb,
             anek,
             anepv,
             anlcv.
and added a GET statement in the program GET ANLZ before moving the values to final internal table.
Here, the the issue is that the values of ANLZ is getting displayed as "#".
Kidnly suggest.
Thanks and Regards,
Rashmi

Hi Rashmi,
Please make sure the order of the nodes should be same as the order in which they are there in LDB or else they will be overwritten
Thanks
Bala Duvvuri

OLMRLIST screen how to fix the cost center tab and its impact?

Hi
Explain the function of the T-Code OLMRLIST.
How does it interact with the MIRO T-Code?
What is the significance of a field check box being checked in OLMRLIST. I particularly want to know about the Cost center field.
Raja

OLMRLIST is used to adjust teh screen variant for the MIRO screen. At the line item level you see layouts and each layout has a set of fields in the form of columns. These are adjusted via the screen layout variants in OLMRLIST like 7_6310 which is all information and like wise you have 6_6310, etc...

Cost center PR price from contract

Hi
my requirement is to get Purchasing Request ((which is cost center PR acct cat:K)) price, from a relevant valid contract..
even when i assign the contract as a source of supply system doesnt take the PR price from contract?
Any suggestions
Thx in advance

Hi ,
Please take care of the SAp note 311174
Cause and prerequisites
The transfer of data from the source of supply is not planned and only
makes sense in some cases. In particular when you change the source of
supply later the copied data must be changed again. However, at this
time it is no longer clear whether the data was copied from the source
of supply or was entered manually.
For your requirement, I would like to suggest you to use the enhancement
below to implement your own logic in purchase requisition:
LMEKO002
Enhance communication structure KOMP for price determination
MEREQ001
Customer's own data in purchase requisitions
BR
Nadia Orlandi

Cost center data fetch from COSS/COSP tables.

Hi Experts,
I need to fetch data from COSS/COSP tables for particular Cost centers fetched in CSKS select.
As there is no Costcenter field I cannot access the database tables directly.
Fetching entire dat and then deleting is causing performance issue with the report.
I need to reduse the time taken by COSS/COSP table select , as I have Cost center field on the selection screen.
Is there any other method or FM that I can use?
Thanks in advance!!!

Hi
This is my code to get the data from a certain cost element group:
}call function 'G_SET_GET_ID_FROM_NAME'
     exporting
       shortname                      = p_kagru
       tabname                        = 'CCSS'
       fieldname                      = 'KSTAR'
       kokrs                          = p_kokrs
       ktopl                          = 'ENPC'
       setclass                       = '0102'
       check_set_empty                = 'X'
     importing
       new_setid                      = setid
*     SET_INFO                       =
    exceptions
      no_set_found                   = 1
      no_set_picked_from_popup       = 2
      wrong_class                    = 3
      wrong_subclass                 = 4
      table_field_not_found          = 5
      fields_dont_match              = 6
      set_is_empty                   = 7
      formula_in_set                 = 8
      set_is_dynamic                 = 9
      others                         = 10
   if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   endif.
   call function 'G_SET_GET_ALL_VALUES'
     exporting
*     CLIENT                      = ' '
*     FORMULA_RETRIEVAL           = ' '
*     LEVEL                       = 0
       setnr                       = setid
*     VARIABLES_REPLACEMENT       = ' '
*     TABLE                       = ' '
*     CLASS                       = ' '
*     NO_DESCRIPTIONS             = 'X'
*     NO_RW_INFO                  = 'X'
*     DATE_FROM                   =
*     DATE_TO                     =
*     FIELDNAME                   = ' '
     tables
       set_values                  = t_set_values
    exceptions
      set_not_found               = 1
      others                      = 2
   if sy-subrc <> 0.
     message id sy-msgid type sy-msgty number sy-msgno
             with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   endif.
loop at t_set_values.
    count = count + 1.
    r_kstar(3) = 'IEQ'.
    r_kstar-low = t_set_values-from.
    append r_kstar.
    if count = 500.
      perform read_coep.
    else.
      at last.
        perform read_coep.
      endat.
    endif.
endloop
U can use somthing like that to get data from cost center
Max

Retraction cost center plan data from BPC to ECC

HI Experts,
We are integrating BW-BPC.
The client wants to Retract the data from BPC to ECC System for reporting purposes.
u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
What is the options to support this Business Process of getting data from BPC to SAP ECC.
Regards
venu
Edited by: venu WAD on Aug 19, 2011 7:19 AM
Edited by: venu WAD on Aug 19, 2011 10:17 AM

Hi Keyrun:
Please refer to slide 7 of document below.
"SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
>Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
>See SAP Note 525543 for additional documentation on field mapping.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

PPOME ,pers no,EE group,EE subgroup,pers area not appear in Basic data tab?

Hi Friends,
                    I am new to SAP HR. I am trying to assign a person for a position in tcode PPOME. After that I could not see Pers No,Name,EE group,EE subgroup,Pers area details are not appear in Basic data tab. But for other persons which are all exist already in system ,I can see pers no,name,EE group,EE subgroup,pers area details. Could you advice what will be the issue?. Thnak you.
Regards,
Hock Teck..

Hi Rajesh / Thomaselsy,
                                    Thanks for your response. Pls see my below output,
             1.    Plogi Orga value is 'X'.
            2.I create person in PA with pers area ,ee group,ee sub group details and i can see all these details in PA0001 table. I did not create pers area, ee group ,ee subgroup for position ids. I wanted to see those pers area,ee group,ee subgroup detail, from pa0001, in PPOME under basic data tab.
           3.Whether I assign position id to a person in PA40 or assign a person in PPOME to a newly created position id,in both cases I can see details are updated in both PA0001 and HRP1001 tables correctly.
          4.I also tried to assing a position id to a person in PA40 and then through PPOME i tried to assign new position id for that same person. Then I can see new position id got replaced in PA40 properly.
          But when I double click on person in PPOME, I could not see pers no,name ,ee group,ee subgroup,pers area under basic data tab..Pls let me know how to proceed further..
Regards,
Hock Teck.

Business area is not being specified in cost center master.

Hello Professional friends,
When i specify Business area in existing cost center master data, it appears an error massage - "Field change Business Area is not possible (transaction data already exists)"
I tried to change the validity by analysis Period, when i do this, it appears anothe error " No further processing (contact your system administrator)"
Its user critical requirement that he want to specify business for all new and existing cost center.
there is no problem with new cost center.
Waiting for valuable suggestion.

Hello,
The rule is that if you make any actual or planned date within the current year, you cannot make any changes to any of the organizational units within the cost center master.
From the next year, you can remove / change the business are within the cost center master, provided:
You have to change the validity period of the cost center master by doing:
Go to KS02
Edit ==> Analysis Period
put your cursor on the valid from e.g. 01.01.1900 and click F5 (the line gets selected and become blue)
Click on Other Analysis period and then change the analysis period. The new analysis period must be starting with the first date of the next fiscal year.
Now change or remove the business area.
For this year, surely you cannot change the business area, since there postings.
Do not try to write any ABAP program to change the standard in order avoid the business area change error, it would end up data inconsistencies.
Thanks,
Ravi

Cost Center validity period change & Business area assignment to cost cente

We are facing with error KS134 - Transaction data already exists for the period.
We tried to create new cost center with period split. But I am getting error KS133 - Deletion is not possible (dependent records exist in table ).
Hence even creation of the new cost center is not possible. We alrady have Validity Period from 1.04.2005 to 31.12.9999.
Is there any alternative solution ?
Sumeet

Hi Sumeet,
The fields in Cost Center Master Data are "Time-Dependent" and you can see the Time-Dependency of each field in OKEG transaction code where you can find "Business Area" to be "Fiscal-Year" based.
So, if at all you need to change the Business Area, it would be possible in next financial year only...
And also, because, your Cost Center is defined from 01.04.2005 to 31.12.999, there is no way that you can change the validity period so as to create / extend in the same period-lap.
I hope you got it...
Srikanth Munnaluri
Edited by: Srikanth Munnaluri on Apr 8, 2009 3:11 PM

What is the impact of business area and cost center in the sales document

Hi all
I have small doubt regarding what is the impact of bussiness area and cost center in the sales document... what is the uses of these (bussiness area, cost center) is help full for sd module
can any one reply plz....
Thanking you

Hi,
Business Area determines where the revenue should be allocated when you sell a material or a service.
For eg: If your customer is in say Mumbai and he is ordering for a service in Delhi (say DIAL - Delhi International Airport Limited) then based on the terminology.
Your customer would belong to B Basis Business Area - WHERE THE REVENUE IS COMING FROM or WHERE YOUR CUSTOMER BELONGS TO (SALES OFFICE).
Whereas your DIAL sales will belong to A Basis Business Area - WHERE THE REVENUE IS GOING TO.
Cost Center would determine where your allocate your cost to.
Say Rounding Off can be used as a cost element, because some sort of revenue is lost when figures are roudned off..
Hope it clarifies your doubt.
Reward points if satisfactory
Regards
Ravi.D.Mansharamani

Error when Assign Order Reason to Cost Center& Sales Area

Hi,
SAP Guru,
I Define the Order Reason.
Now I want To Assign This Order Reason to Sales Area & Cost Center.
When I am Doing this I got the Error SYST:Date 00/00/0000 not Expected. Message No.FGV004
Please Advice me.
Thanks & Regards
Bhushan

Hi,
Just define the order reason and it will automatically come in the header irrespective of the Sales area. But if the system is giving you this error FGV004, then consult the abapper that the system might be seekin the date from the program bcoz normally the system pics up the OS date.
Regards
Gaurav

Name EE Grp EE SGrp Per Area & Cost Center tab disappered from PA 30 Screen

Similar Messages

Maybe you are looking for