"Name not known" error in all PCR of the MSS Package

Hi,
I'm getting an error in the PCR workset of the MSS package.
When I submit any form the error which I get is
"Name not known.Check your entries" .
Is this due to some problem in R/3 settings?
Also when I submit a PCR "Request for separation(enhanced)" I get an exception.
The log entry for this exception is as follows:
_27##0#0#Error#1#com.sap.sup.admin.connector.AbapConnectorLauncher#Plain###Cannot start ABAP Connector Listener. Please try to configure the connection in ABAP Systems Management (Setup Local Connectivity).

Hi Justin,
With other words, you are using the BP for MSS 60.1.5 or later.
Can you connect to the backend via a Java Connection?
Also this link will guide you much further. It helped me a lot for the new MSS forms (ECC 50).
The ISR Cookbook can be found here!
http://www.service.sap.com/isr
regards,
Noel

Similar Messages

  • Field name is not known Error in formula field...

    Hi,
    I have a report in CR11.5 r2 that I call from VB6.
    The report works fine, until a I create this formula, Trim ({RSE.PatName}).
    When I put this formula field in a section in the report, I have this error, "Field name is not known Error".
    Any idea?

    Make sure you have SP 6:
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Does the formula work in the designer?
    Are you changing datasource at runtime? If so, can you change to that datasource in the designer and run the report there?
    If you do not use the Trim function, does it work?
    If you do not use the field in a formula abd place it in say, the detail section as a test, does the report work?
    But remember that what ever the report is doing at runtime, must work in the designer 1st.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • BPM_DATA_COLLECTION fails with (Output device "" not known) error

    Hi all,
    I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system  failing with 'Output device "" not known error.  Since it is collecting data for Solution Manager system why does is it trying to find an output device.
    It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
    Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2.  _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
    Thank you very much for your help!

    I am experiencing this same issue in our ECC 6.0 system.  We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system.  These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
    When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
    Does anyone know if it ok to change the user for this job? Should it be run by DDIC?  I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

  • Field name not known   in old existing report.

    We have a report that we have used for a long time and has always been fine.  Today when we open it  it says data will be lost because "Field name not known".   So you click ok and look at the report in design and the report is missing a bunch of fields.  You look at the Field Explorer and it only shows the first field in the table.  This report links 2 tables. The linking field is the first field in both tables.
    I try to re-map datasource and no luck.   I close Crystal, open Crystal and create a new report, look at the same tables and all of the fields are there. Create similar report looking at same datasource, same tables, some of the same fields, and it works fine.
    What is wrong with the original report and why won't it connect or show fields?

    It may be that the report file became corrupted. Do you have a back up of that report anywhere? If not you could create a new report using the same tables and links and then have both new and old reports open and copy objects from the old report to the new report. Save it and then verify it all works as it should and replace the old report with then new report. Copy the old report somewhere safe also.
    Thank you
    Don

  • "not known error system" saving metadata

    very often, but no always, when I save metadata in the file, appear an "not known error system" message

    Hi, thanks for reply,
    I use mainly raw files,
    Giancarlo Majocchi
    cell +393356263390
    www.buildup-it.com
    Inviato da iPad
    Il giorno 17/mar/2014, alle ore 13:19, Tony Jay <[email protected]> ha scritto:
    Re: "not known error system" saving metadata
    created by Tony Jay in Photoshop Lightroom - View the full discussion
    Hi welcome.
    Are you able to furnish information about which files metadata is being saved - RAW files (XMP sidecar files in reality), JPEG, TIFF, PSD etc?
    Are there any patterns to this error message appearing?
    Tony Jay
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6216084#6216084
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6216084#6216084
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6216084#6216084. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • It shows the log sequence not found error while all the log seqences exist?

    Why the database shows the log sequence not found error while all the log seqences exist?
    SQL> select*from v$log_history;
    RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
    RESETLOGS_CHANGE# RESETLOGS
    1 657328345 1 1 519368 13-JUN-08 543434
    519368 13-JUN-08
    2 657370849 1 2 543434 13-JUN-08 567705
    519368 13-JUN-08
    3 657373012 1 3 567705 14-JUN-08 570408
    519368 13-JUN-08
    RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
    RESETLOGS_CHANGE# RESETLOGS
    4 657373039 1 4 570408 14-JUN-08 570464
    519368 13-JUN-08
    5 657374623 1 5 570464 14-JUN-08 573505
    519368 13-JUN-08
    6 657375015 1 6 573505 14-JUN-08 573856
    519368 13-JUN-08
    RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
    RESETLOGS_CHANGE# RESETLOGS
    7 657376537 1 1 570465 14-JUN-08 573543
    570465 14-JUN-08
    8 657377084 1 2 573543 14-JUN-08 575109
    570465 14-JUN-08
    9 657377094 1 3 575109 14-JUN-08 575114
    570465 14-JUN-08
    RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
    RESETLOGS_CHANGE# RESETLOGS
    10 657377103 1 4 575114 14-JUN-08 575121
    570465 14-JUN-08
    11 657377106 1 5 575121 14-JUN-08 575123
    570465 14-JUN-08
    11 rows selected.
    RMAN> flashback database to sequence=10 thread=1;
    Starting flashback at 14-JUN-08
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=155 devtype=DISK
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
    RMAN-20206: log sequence not found in the repository

    Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
    You seem to mistake the column recid for the sequence column.
    The sequences are listed in -not surprisingly- the sequence# column.
    Sybrand Bakker
    Senior Oracle DBA

  • TS1702 My app 'Paper Notes' is error. My documents in the app is lose. I cannot contact Nuance. Please help, I want my documents back.

    My App 'Paper Notes' is error. My documents in the app are lose.
    I need my document back. Please advise.

    I don't see it mentioned above, but when you remove the apps from your devices, have you been to system preferences > iCloud and checked that all your pages and numbers documents have been deleted from your storage, deleting them if necessary.
    Also when you add things back, avoid adding documents with the same names as those you have been having problems with.

  • HT4641 Hello there i am using the latest version of pages but when I imported a word do.ument with some figures ( mainly pictures, X-rays,  CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anybody

    Hello there i am using the latest version of pages on ipad3 but when I imported a word doument with some figures ( mainly pictures, X-rays,  CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anyone help.
    Thanks

    Thank you very much!
    I cant believe this little comment has been so helpful!
    But yes it is:
    I explain, despite my efforts to find, googled it, forums, faqs, etc...
    no where it mentionned the manifest.fm file is... INSIDE the .jar!
    Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
    So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
    I am going to try that now.
    Actually.... :( no its mentionning my main class!
    Manifest-Version: 1.0
    Ant-Version: Apache Ant 1.7.0
    Created-By: 10.0-b19 (Sun Microsystems Inc.)
    Main-class: courseworkjava3d.Simple3D
    Class-Path:
    X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
    http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
    Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
    Edited by: CupofTea on Apr 13, 2008 3:28 AM

  • Anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??

    anyone know why i cant upgrade to newer version of itunes , its coming with an error "ITUNES64.MSI FOLDER containing the installation package is missing ??Ive tried unistalling previous version but same message comes up

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • The field name is not known error

    Hi,
    I have a report that is pointing to database(db1).
    Can i change the database name to database(db2) in my c# application?when i am changing to new database name in my application i am getting error as "field name is not known".
    Please give some suggestions.
    Thanks in advance

    I'm having the same problem.
    I've upgraded from Crystal 8.5 to Crystal XI.
    I've converted all my reports from Crystal 8.5 to Crystal XI.
    When I try to run the report I get the error:
    The Field Name is not known and nothing else.
    I did upgrade the report and verified the database.
    Does anyone have any ideas ?
    If I delete the formula, and after I create it (by handle) the report will good.
    But I have about 1000 reports !

  • This field name is not known error

    We are repeatedly getting the following error for some of our users .We are unable to trace it.Your inputs would be highly appreciable. We are using dot net 2.0 & visual studio 2005 for development & Crystal Reports 10.2.
    error message appearing  -u201CThis field name is not known. Error in File C:\WINDOWS\TEMP\DNIReport {61006661-3C45-4100-88AD-09C3D7839CF5}.rpt: Error in formula . 'if({DNIBE.ParentStoreId}= "" or {DNIBE.ChildStoreId} = "") then ' This field name is not known.u201D
    Thanks in advance

    Hello, Janmejaya;
    This error occurs when the application is not correctly logged on to the database.
    Because we are a two pass reporting system and the first pass looks at the formulas, you get a formula error when data is missing instead of the expected Database logon error.
    Confirm that your data is visible to your reports at runtime.
    Elaine

  • "This field name is not known" error when upgrading from VS 2003 to VS 2005

    When we upgraded our web servers from VS 2003 to 2005, our crystal reports web viewer began having a problem with reports that contained sub-reports.  We now are getting the following error on the web page.  The reports were developed in Crystal 10, but I upgraded them to Crystal 11 but still recieved the same error.
    Any help would be greatly appreciated.
    thank you
    This field name is not known. Error in File C:\DOCUME1\DMDEVB1\ASPNET\LOCALS~1\Temp\CategorybyStateProductDist {B0FCB37B-A7DB-4786-AD69-55568EC94923}.rpt: Error in formula . '{usp_wd_RptCategoryByStateProductDist;1.State} = {?@State} ' This field name is not known.

    HI Karl,
    Also Try to update the database connection for the report.
    You can do that by opening report in designer, then
    Go To Database Menu -> Setdatasource Location
    Connect to the datasource you want and update the datasource.
    Save the report.
    Hope this Helps !!!
    Prasad

  • Object name not found error after upgrading to Visio 2013

    Hello,
    I have a C# application which uses the Visio drawing control. I have been working on making it compatible with Visio 2013. I get an error using Visio 2013 which I did not get using Visio 2010. The error is a COMexception:
    Object name not found.
    That is all the error says. The code which causes it to occur is as follows:
    Document document = axDrawingControl1.Document;
    document.Pages["page1"].Drop(document.Masters["Dynamic Connector"], 0, 0);
    It does not seem to matter whether I use Dynamic Connector or Rectangle or any other shape, the error still occurs.
    Here's the weird part: I tried out this code in a simple app with a Visio drawing control to see if I could figure out how to make it go away, and the error was still occurring for a little while, and then the code magically started working without me making
    any changes to it. Unfortunately, it didn't start magically working in the original application so I'm still trying to figure out what is causing it.
    Thanks for your help!

    Did the error disappear once you'd created a document and added a dynamic connector shape to the drawing? If so then there is now a Dynamic Connector master stored in the document stencil (where masters used in the drawing are contained).
    Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
    Sandrila Ltd

  • Field not Known Error in Crystal Report 11

    I was using Crystal Report 8.5 earlier and i had a field named "Fee $" in the query and it was working fine when i pull the report in VB Application using Crystal Report Viewer. But when i migrated to Crystal 11 things started breaking. Crystal Report 11 is not supporting "Fee $" as column field and generates error Field not Known. And when i change it to only "Fee" removing special character "$", thing started in place. I appreciate any help on this.

    duplicate

  • Changing ODBC Connection results in Field Name not found error

    Post Author: POH
    CA Forum: Data Connectivity and SQL
    I am using CR XI with mySQL 5.0 and VB6. The computer I use to to design my reports has a odbc dsn which is used to develop the reports. On the production computer the same odbc dsn is present but has a different server, database, user and password entries. I am using the code below to set the connection and test the database.    For Each objDatabaseTable In objDatabaseTables        objDatabaseTable.SetLogOnInfo "servername", "dbname", "user", "pw"        objDatabaseTable.ConnectionProperties("UseDSNproperties") = True    Next crxDatabaseTable    crxDatabase.Verify No Error is given and the report in this case does not have any sub reports.Now when the command ViewReport is run the CR viewer is shown but the report is not displayed. The viewer shows the error "Filed Name not found". I do not have any formel fields in the report and I have checked to make sur that both databases have the same structure. Can any body help me. Regards Paul    

    Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
    the DSN. It's better if you add a System DSN.
    Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
    driver specified". See this KB article:
    http://support.microsoft.com/kb/942976/en-us

Maybe you are looking for