Name() not supported XSLProcessor class?

Hi,
XSLProcessor doesn't seems to support the node set function name(). Is this true? Or is there something wrong with my code segment below?
<xsl:template match="*">
<TD>
<INPUT>
<xsl:attribute name="NAME">
<xsl:value-of select="name()"/>
</xsl:attribute>
<xsl:attribute name="VALUE">
<xsl:value-of select="."/>
</xsl:attribute>
</INPUT>
</TD>
</xsl:template>
Can someone please advise? Thanks a lot!!!

Hi all,
I found the answer already!!! The name() function is not supported in a previous version of the XSLProcessor class! Thanks for your time! Cheers... :)
regards,
Jerry

Similar Messages

BOXIR2: Object name not prefixed with class

While creating Webintelligence report from a universe having more than one Dimension object with same name in different classes, the Object name is not prefixed with Class Name.
1. The issue occurs after migration to XIR2 Webintelligence.
2. 6.5 version of WebIntelligence and XI Desktop intelligence is prefixing class name in above scenario.
REPRODUCTION STEPS:
Create a universe with 2 classes (C1 & C2), Create a dimension object D1, D2 under class C1 and D2 & D3 under class C2. Export the universe.
Create a webi report from the published universe, In Java Query panel , Drag all 4 Dimension Objects to Query Filter Section.
Perform the above in Webintelligence of BO 6.5 & BO XI. Note that in BOXI Class name is not prefixed.
Please let me know weather its change in the product or bug.

Yes this is a bug...

Itunes speaker name not supported by this base station

I get this message when I try to enable airtunes on my AX using the new Airport Utility:
--The setting "itunes speaker name" is not supported by this base station--
I have reloaded the firmware, done a couple hard resets, no dice.
Anyone seen this before?
If I try to use the old airport admin utility I don't see the "music" tab used to inspect and change the speaker name and password.
And the AX does not show up in the iTunes speaker list.
TIA for ideas,
UPMG

Welcome to Discussions, andrewmalone!
Unless it's brand new, to get a signal you'll need to reset to factory default to clear the previous conflicting profile. Refer to the last section "How to perform a factory default reset" on this page:
http://docs.info.apple.com/article.html?artnum=108044
To confirm successful reset after a minute, you should see the Express's default name (Apple Network ____) in your menu bar's AirPort icon.

Cameras with European names not supported!!!!

I don't have my copy of aperture yet, however I have been reading some of the posts to get ready. As I understood the raw support is build into MacOS, so if you can open a raw files in Preview or iPhoto that particular raw format will also work with Aperture. I was happy to know that apple had just included .MRW (raw for Konica-Minolta 7D) in the last release of Tiger (10.4.3). To my great disappointment however I see that i cannot open .MRW files in Preview nor in iPhoto. So I investigated a little further and found out that people in the US can open the files with no problem. Apparently the issue is the camera name: Maxxum 7D in the US and Dynax D7 in Europe. The same thing is true for Canon for the European version of EOS Digital Rebel XT, the EOS 350D. For Canon a fix has been posted (http://minimal.cx/2005/11/01/make-os-x-1043-understand-canon-eos-350d-raw-files/), but unfortunately nothing for Konica-Minolta. I hope Apple will immediately address this issue, or somebody will come up with a fix.

The issue is indeed just the camera name !!!
The .MRW raw files from my Konica Minolta Dynax 7D were not recognized by either Preview or iPhoto, while in the US owners of Konica Minolta Maxxum 7D (exactly the same camera) could open them.
I edited the Raw.plist in the folder /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources with text edit. All I had to do was to duplicate the listings for the MINOLTA-MAXXUM 7D and change the name of the camera to MINOLTA-DYNAX 7D. Now I can open the .MRW files with no problems and they look fine. I assume they should now work also in Aperture.

DNS Names Not supported by voicemail module - workaround?

itguy1234455454 wrote:
but they changed it on usIf they is your ISP I'd be having some very serious complaint level words with them.itguy1234455454 wrote:
our IT Manager wants to use DNS names instead, to prevent this from happening again.It's good practice to use a hostname anyway.

Hi,
I have an NEC UX5000 voicemail system that doesn't appear to support DNS Names. Our SMTP host's WAN address changes often. Instead of playing catch-up and change the wan address when someone tells me they are not getting their voicemails, is there a better way to handle this?
I was thinking of some type of IP based DDNS solution. If I could point my mail server to an internal address that never changes, and have that dynamically get the IP of the SMTP server, and then translate it, that would fix my issue.
Your thoughts?
This topic first appeared in the Spiceworks Community

Calendar+iCloud to Outlook 2007 - not supported calendar message . ics

Consider this
Two new macs
1. MacA set up with iCLoud to sync Calendars
2. MacB set up not to use iCloud
Test on MacA (my Wifes) used for her work, across iPhone, iMac, MBP
Send invite from Calendar on the Mac to my work address [email protected] and reciever on Outlook 2007 from MacA
gets Name has invited you to <Event Namre> but the attached .ics enty
has name "not supported calendar message.ics"
The attached body coantains a web page screen shot to interact with icloud
In additaion the reply address is [email protected] and an unintelligble email address
This mac has iCloud as the account in Calendar
Test on MacB used for fun - not connected to any work
Send invite from Calendar onthe Mac to my work address [email protected] from MacB
gets Event invitation <Event Name> and the attached .ics enty
works as expected. Accept the invite and it gets put in your Outlook calendar as you would expert
Right reply address, right behavior on reply.
Ths imac has calander accounts to use gmail.
I kind of get why. But is there anyway solve the issue with with MacA.
My wife's invites for her work will not behave correctly to whoever her clients are.
But I want iCloud to sync Calendars - and send invites properly not add all the iCloud functionality over the top

Yes it is elsewhere, however I have a Vista 32-bit that doesn't work and a Windows/7 64bit that doesn't work. I think it's just generally "bad code" and OBVIOUSLY the person that was supposed to test it didn't. I can't uninstall on my Vista machine because it will break all my Contacts and Calendar sharing too. Therefore, for now, I guess I will just have to give up on sharing pictures until they get it fixed.
Which, BTW, has been an AWFULLY LONG TIME already. I installed v2 over a week ago and Apple hasn't even acknowledged anywhere I've seen that they have an issue.
'Bout time to start sending emails to the press: Maybe they can goad Apple into doing something.
There are several articles expounding about how great it is: I will be replying to all I can find that it DOES NOT WORK AND APPLE DOES NOT CARE. They sold several million new phones, all made in China, and now they are fat, dumb and happy.

JBO-26061, Null User Name and password not supported by thin driver

Hello !
I have just installed Oracle 8.1.6 on my Linux Box.My Jdeveloper is installed on Win 98 Box. Now I am trying to execute the Online Orders sample package provided with the Jdeveloper. I have followed the instructions provided with the Jdeveloper Tutorial sample. The test connection between the client and server are a success. The OnlineOrder test is also a success. When I run The Application.java Class then it is giving the
JBO-26061 error with details as Null user name and password not supported by thin driver.
Where I am wrong I dont understand. Pls guide?

jdeveloper is certifed to run on the win nt AND win 200 platforms only.
Please read the "Install notes" file (install.htm) before proceeding further.

RUL-00025:fact class multiple inheritance not supported

Hi Everyone,
I am creating a rule for a order schema which accepts OrderTotal and CustomerType and based on both response back if the Approval is required or not. When deploying the process I am getting the "RUL-00025:fact class multiple inheritance not supported." Below is the schema which I am using.
<?xml version="1.0" encoding="windows-1252"?>
<schema targetNamespace="http://www.OrderRequest.com" xmlns:or="http://www.OrderRequest.com" xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="unqualified" attributeFormDefault="unqualified">
     <element name="OrderDetailsRequest" type="or:OrderRequestT"/>
     <element name="OrderDetailsResponse" type="or:OrderResponseT"/>
     <complexType name="OrderRequestT">
          <sequence>
               <element name="OrderTotal" type="int"/>
               <element name="CustomerType" type="string"/>
          </sequence>
     </complexType>
     <complexType name="OrderResponseT">
          <sequence>
               <element name="ApprovalRequiredFlag" type="string"/>
          </sequence>
     </complexType>
</schema>
This is what the error is:
The rule session RulesTest:90002 failed to execute step assert
RUL-00025:fact class multiple inheritance not supported
oracle.rules.rl.exceptions.RLRuntimeException: fact class multiple inheritance not supported
     at oracle.rules.rl.exceptions.ExceptionFactory.createRuntimeMultipleInheritanceException(ExceptionFactory.java:467)
     at jess.DefinstanceList.autoDefclass(DefinstanceList.java:996)
     at jess.DefinstanceList.assertObject(DefinstanceList.java:570)
     at jess.Rete.assertObject(Rete.java:1557)
     at jess.AssertObject.call(ReflectFunctions.java:1198)
     at jess.FunctionHolder.call(FunctionHolder.java:30)
     at jess.Funcall.execute(Funcall.java:280)
Caused by: oracle.rules.rl.exceptions.MultipleInheritanceException: fact class 'DemoPackage.OrderDetailsRequestImpl' cannot extend both 'DemoPackage.OrderRequestT' and 'DemoPackage.OrderDetailsRequest'
     at oracle.rules.rl.exceptions.ExceptionFactory.createMultipleInheritanceException(ExceptionFactory.java:443)
     at oracle.rules.rl.common.ClassSymbol.setFactClass(ClassSymbol.java:187)
     at oracle.rules.rl.common.ClassSymbol.initialize(ClassSymbol.java:280)
     at jess.DefinstanceList.getProperties(DefinstanceList.java:1168)
     at jess.DefinstanceList.autoDefclass(DefinstanceList.java:992)
     ... 33 more
Execution plan for RulesTest:90002
assert fact DemoPackage.OrderDetailsRequest
Please help me!!!
Thank You.

For the class DemoPackage.OrderDetailsRequest, either don't import it into the datamodel or set the visibility of it to false. This should fix the issue.

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group.

Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "";
Also I have used,
             String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof     {
     public static void main (String[] args)     {
          Hashtable env = new Hashtable();
          String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
          String adminPassword = "XXXXXXX";
          String ldapURL = "ldap://mydc.antipodes.com:389";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          //set security credentials, note using simple cleartext authentication
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL,ldapURL);
          try {
               //Create the initial directory context
               LdapContext ctx = new InitialLdapContext(env,null);
               //Create the search controls
               SearchControls searchCtls = new SearchControls();
               //Specify the search scope
               searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
               //specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
               //Specify the Base for the search
               String searchBase = "DC=antipodes,DC=com";
               //initialize counter to total the group members
               int totalResults = 0;
               //Specify the attributes to return
               String returnedAtts[]={"memberOf"};
               searchCtls.setReturningAttributes(returnedAtts);
               //Search for objects using the filter
               NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
               //Loop through the search results
               while (answer.hasMoreElements()) {
                    SearchResult sr = (SearchResult)answer.next();
                    System.out.println(">>>" + sr.getName());
                    //Print out the groups
                    Attributes attrs = sr.getAttributes();
                    if (attrs != null) {
                         try {
                              for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
                                   Attribute attr = (Attribute)ae.next();
                                   System.out.println("Attribute: " + attr.getID());
                                   for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
                                        System.out.println(" " + totalResults + ". " + e.next());
                         catch (NamingException e)     {
                              System.err.println("Problem listing membership: " + e);
               System.out.println("Total groups: " + totalResults);
               ctx.close();
          catch (NamingException e) {
               System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated.

Not able to get group name by using memberof class, getting Total groups as 0 even I am member of that group. Through this memberof class I am trying to find full qualified name(DN) of my group.
code I have used:
//specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "";
Also I have used,
             String searchFilter = "(&(objectClass=user)(CN=Username))";
               //Specify the Base for the search
               String searchBase = "ou=ibmgroups,o=ibm.com";
But in both cases I am getting value for Total groups as 0.
Code Reference:
* memberof.java
* December 2004
* Sample JNDI application to determine what groups a user belongs to
import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
public class memberof     {
     public static void main (String[] args)     {
          Hashtable env = new Hashtable();
          String adminName = "CN=Administrator,CN=Users,DC=ANTIPODES,DC=COM";
          String adminPassword = "XXXXXXX";
          String ldapURL = "ldap://mydc.antipodes.com:389";
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          //set security credentials, note using simple cleartext authentication
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,adminName);
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          //connect to my domain controller
          env.put(Context.PROVIDER_URL,ldapURL);
          try {
               //Create the initial directory context
               LdapContext ctx = new InitialLdapContext(env,null);
               //Create the search controls
               SearchControls searchCtls = new SearchControls();
               //Specify the search scope
               searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
               //specify the LDAP search filter
               String searchFilter = "(&(objectClass=user)(CN=Andrew Anderson))";
               //Specify the Base for the search
               String searchBase = "DC=antipodes,DC=com";
               //initialize counter to total the group members
               int totalResults = 0;
               //Specify the attributes to return
               String returnedAtts[]={"memberOf"};
               searchCtls.setReturningAttributes(returnedAtts);
               //Search for objects using the filter
               NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
               //Loop through the search results
               while (answer.hasMoreElements()) {
                    SearchResult sr = (SearchResult)answer.next();
                    System.out.println(">>>" + sr.getName());
                    //Print out the groups
                    Attributes attrs = sr.getAttributes();
                    if (attrs != null) {
                         try {
                              for (NamingEnumeration ae = attrs.getAll();ae.hasMore();) {
                                   Attribute attr = (Attribute)ae.next();
                                   System.out.println("Attribute: " + attr.getID());
                                   for (NamingEnumeration e = attr.getAll();e.hasMore();totalResults++) {
                                        System.out.println(" " + totalResults + ". " + e.next());
                         catch (NamingException e)     {
                              System.err.println("Problem listing membership: " + e);
               System.out.println("Total groups: " + totalResults);
               ctx.close();
          catch (NamingException e) {
               System.err.println("Problem searching directory: " + e);
Any help will be highly appreciated.

2008 Airport Express utility doesn't work all of a sudden, name reverted to ID, lost security, message not supported.

The Airport Express I purchased in 2008 worked fine this morning, but when I tried to use Wi-Fi with my cell phone and iMac the light was green on the AE but no signal. I unplugged AE and unplugged my modem, plugged in my modem, plugged in my AE, it turned green but no signal - that is, the name I had given it did not appear on either my iMac of cell phone. Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working. The problem is there now is no security. I got a message that Airport Utility did not support or something like that. So then I took the old CD that came with AE (in 2008) and loaded that on my iMac so I could re-establish WPA security. It seemed to load okay but then the following message popped up, "AirPort can't be installed on this disk [my Macintosh HD]. The version of Mac OS X on this volume is not supported." Well, yes, since I'd purchased my AE I'd gone through all the cats and recently had upgraded to Mountain Lion, 10.8.5, several weeks ago. But since this morning I had done nothing new.
So, it's 12:30am, Apple Care is not open - I'm not even sure I'm still covered - so maybe some night owl out there can tell me what I need to do. I'm beginning to suspect it might have to do with my operating system upgrade, but don't understand why this problem should suddenly crop up after several weeks. Any ideas out there? Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week - something I just lived with.

Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working.
My first thought is that the AirPort Express is normally good for 4-5 years on average, so you may be getting some signals in that regard.
The AirPort Express reset itself back to factory default settings. The big question now is if you re-configure it again whether it will hold those settings. Not likely....my opinion.
The other problem that you have is that Mountain Lion operating system no longer supports the older version of the AirPort Express that you have.
Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week
It's really time for a new AirPort Express, which will offer much faster reliable performance....and it will be compatible with AirPort Utility on the Mountain Lion operating system.

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:la

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

Error in File name or class name not found during Automation operation: 'CreateObject'

Hello Team,
When I am trying to execute the below code i am getting the following error. Any help would be greatly appreciated.
Set oFSO = CreateObject("Scripting.FileSystemObject")
If Not oFSO.FolderExists(SavePath) Then
Set f = oFSO.CreateFolder(SavePath)
Else
End If
53 4/11/2014 12:27:22 PM Error:
Error in <NoName(4).VBS> (Line: 9, Column: 1):
File name or class name not found during Automation operation: 'CreateObject'
I have googled through the error and tried to re-register the scrrun.dll using regsvr32 eventhogh it is successfully registered, i am getting the following error. My PC is windows 7 32bit OS.
any help is greatly appreciated.

The following script class will write a log file entry. See if it will run for you.
The script is using a class object that you might not have seen before. A little intro: The top section is just for testing the class. Normally I just comment this out after the class is working well. It should run right way. I would save the vbs file in the editor, That way when you are using autoactpath or currentscriptpath variables they will be able resolve the paths.
Paul
Attachments:
LoggingCode_V2.VBS ‏5 KB

Web Deploy error - "This method is not supported by this class"

I have an MVC project which I am trying to deploy to one of our internally-hosted web front end servers via a TFS build process. Our server hosts the MS Deploy service, and other solutions deploy without problems to the same box. The parameters for the build
process are as follows:
/p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:MSDeployPublishMethod=WMSVC /p:MsDeployServiceUrl=https://<server>:8172/msdeploy.axd /p:DeployIISAppPath="<internal.site.com>" /p:username=<username> /p:password=<password>
/p:IncludeIisSettingsOnPublish=false /p:AllowUntrustedCertificate=True /p:OutputPath=bin\ /p:SkipExtraFilesOnServer=True /p:VisualStudioVersion=11.0
The error message I receive at the point the build reaches the deployment activity is:
Web deployment task failed. (Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.)
Could not complete the request to remote agent URL 'https://<server>:8172/msdeploy.axd?site=<internal.site.com>'.
The request was aborted: The request was canceled.
This method is not supported by this class.
We've found
this StackOverflow post which describes the same error we're experiencing, however the suggested solution is something we already do in our server configuration, so this doesn't resolve the issue for us.
Has anyone seen this error before, or is able to make any suggestions why it is happening?

Hi Matt,
You have to have a look in the build log then copy the command that is under Run MSBuild node and executed it on the build agent.
You should find something like below:
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe /nologo /noconsolelogger "C:\Builds\....sln" /nr:False /fl /flp:"logfile=C:\Builds\...log;encoding=Unicode;verbosity=normal" /p:SkipInvalidConfigurations=true /p:CreatePackageOnPublish=true /p:DeployOnBuild=true /p:SkipExtraFilesOnServer=True /m /p:OutDir="C:\Builds\...\bin\\" /p:Configuration="DEV" /p:Platform="Any CPU" /p:VCBuildOverride="C:\Builds\....sln.Any CPU.DEV.vsprops" /dl:WorkflowCentralLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;BuildUri=vstfs:///Build/Build/31630;IgnoreDuplicateProjects=False;InformationNodeId=14;TargetsNotLogged=GetNativeManifest,GetCopyToOutputDirectoryItems,GetTargetPath;LogProjectNodes=True;LogWarnings=True;TFSUrl=http://...-tfs:8080/tfs/...;"*WorkflowForwardingLogger,"C:\Program Files\Microsoft Team Foundation Server 12.0\Tools\Microsoft.TeamFoundation.Build.Server.Logger.dll";"Verbosity=Normal;" /p:BuildId="aa2d3857-27e9-4854-b44f-4ca625ccd786,vstfs:///Build/Build/31630" /p:BuildLabel="..._2015.02.27.2" /p:BuildTimestamp="Fri, 27 Feb 2015 11:16:41 GMT" /p:BuildDefinition="..."
Daniel

Name() not supported XSLProcessor class?

Similar Messages

Maybe you are looking for