Name of the field on teh Selection Screen

We execute a report program and we get a Selection Screen .
The requirement is can we catch the field names of the fields on the selection screen.(We can get the field name by pressing F1 and looking into the Technical Information)...But how can we fetch the value of the field name dynamically.
Any information/Pointers in that direction will be very helpful.

Hi,
This is a part of code from SAP standard code to get the technical field info. Probably you can explore on this ...
DATA epss TYPE REF TO CL_EPSS_GENERIC.
DATA w_appl TYPE epssappl.
DATA l_info_object TYPE sdokobject.
DATA l_infodoc TYPE epssdoc.
CALL METHOD epss->give_applications
EXPORTING
applid = 'EPSSHTML'
IMPORTING
control = w_appl-ref.
CALL METHOD w_appl-ref->('GIVE_ACTUAL_DOCUMENT_INFO')
IMPORTING
infodoc = l_infodoc.
Here the l_infodoc contains the techical field info.
Regards,
Wenceslaus.

Similar Messages

How to capture the user change in an input field on a selection screen?

I am coding a selection screen in which there are two input fields. The first field takes a Unix directory from the user input. Based on the input value, the second field will be populated with a the name of a file under the corresponding directory.
My question is how I can make the program capture the user input without having to make the user press ENTER after they enter the value in the first field?
Any help will be greatly appreciated.

Venkat,
Actually you led me to the real solution! It's the function module DYNP_VALUES_READ that does the trick for me. This function enables the program to capture dynamic user changes without recourse to PAI. Please refer to the code below:
REPORT   zreiabsintf MESSAGE-ID zreiabsintfmc.
*<HGDC------------------------------------------------------------------
* Selection screen for the conversion program
*HGDC>------------------------------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-001.
PARAMETERS: p_indir   LIKE epsf-epsdirnam OBLIGATORY,                   " Inbound file directory
            p_infile LIKE epsf-epsfilnam DEFAULT gc_infile OBLIGATORY, " Inbound file name
SELECTION-SCREEN END OF BLOCK input.
*<HGDC------------------------------------------------------------------
*   Displays a file-open dialog when the user clicks the search
*   help button next to the inbound file text field. The user
*   can select the inbound file visually.
*HGDC>------------------------------------------------------------------
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
* Capture any user change to the directory.
PERFORM check_dir_change.
* Display the file open dialog
PERFORM file_open_dialog CHANGING p_infile.
*<HGDC------------------------------------------------------------------
* Global constants
*HGDC>------------------------------------------------------------------
CONSTANTS:
    gc_indir LIKE epsf-epsdirnam
              VALUE '/interfaces/<SID>/inbound/',      " Default inbound directory template
    gc_infile LIKE epsf-epsfilnam VALUE 'input'.       " Default inbound file name
*<HGDC------------------------------------------------------------------
* Global data
*HGDC>------------------------------------------------------------------
DATA:
    gs_dynpfields   TYPE dynpread,                        " Fields of the current screen
     gt_dynpfields   LIKE STANDARD TABLE OF gs_dynpfields. " Table of the screen fields
*&      Form file_open_dialog
*       Opens a dialog window for the user to choose a file in
*       the specified Unix directory.
*      <--P_FILE is the file to be selected.
FORM file_open_dialog CHANGING p_file.
* Validate the directory.
OPEN DATASET p_indir FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    MESSAGE i001(zreiabsintfmc) WITH p_indir.    " Unable to open the given directory
    EXIT.
ENDIF.
CLOSE DATASET p_indir.
* Call the dialog window to open a file in the directory.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = p_indir
    IMPORTING
      serverfile       = p_file
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc NE 0.
    MESSAGE i002(zreiabsintfmc).                 " Failed to open the file.
    EXIT.
ENDIF.
ENDFORM.                    " file_open_dialog
*&      Form check_dir_change
*       text
* --> p1        text
* <-- p2        text
FORM check_dir_change .
CLEAR gs_dynpfields.
CLEAR gt_dynpfields.
gs_dynpfields-fieldname = 'P_INDIR'.
gs_dynpfields-fieldvalue = p_indir.
APPEND gs_dynpfields TO gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = gt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_dynpfields INTO gs_dynpfields INDEX 1.
p_indir = gs_dynpfields-fieldvalue.
ENDFORM.                    " check_dir_change
Thanks for all your answers! The problem is now solved.
Edited by: Ning Hu on Apr 9, 2008 11:32 AM
Edited by: Ning Hu on Apr 9, 2008 11:34 AM

Field Name of the field on the Selectiion Screen

Hi,
I am executing report program and we get a Selection Screen .The question is can we catch the field names of the fields on the selection screen dynamically.
We can find the field name by pressing F1 and looking into the Technical Information of that perticular field.
But can we fetch the field name dynamically.
Any pointers/information in this regard will be highly helpful.
Thanks & regards,
Abhijeet

Hello Abhijeet,
Here's what I think you're looking for -
tables spfli.
parameters     : p_test   like spfli-carrid.
select-options : s_carrid for spfli-connid.
DATA:
descr_ref TYPE ref to cl_abap_elemdescr.
START-OF-SELECTION.
descr_ref ?= cl_abap_typedescr=>describe_by_data( p_test ).
WRITE: / 'Typename     :', descr_ref->absolute_name.
WRITE: / 'Kind         :', descr_ref->type_kind.
WRITE: / 'Length       :', descr_ref->length.
WRITE: / 'Decimals     :', descr_ref->decimals.
WRITE: / 'Output Length:', descr_ref->output_length.
WRITE: / 'Help ID      :', descr_ref->help_id.
Kind------> data type (C , I , etc.,)
Help ID---> data element (usually).
There are other classes in ABAP of the form CLABAPDESCR which can provide you with other information. These classes all belong to what is called RTTI (Run Time Type Identification). However, these are available only from 46c. You can explore the other classes, as I think they would be very interesting and useful in the future.
Regards,
Anand Mandalika.

I need below fields at my selection screen.From which table we can find the

Sales Org > only one selection field
Division > only one selection field
Channel > from u2013 to fields
Sales Office Channel > from u2013 to fields
Sales Rep Channel > from u2013 to fields
User ID of the CSR Channel > from u2013 to fields
Customer Channel > from u2013 to fields
Material Channel > from u2013 to fields
Date: Channel > from u2013 to fields
I need these fields at my selection screen.From which tables I find these things.I need this logic also.

I need help

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

To get plant field in my selection screen based on user profile maintained

Hi All,
I have plant (WERKS) field in my selection screen. Now I need to get the plant value maintained in the user profile for that user. So how to get the plant value based on the user profile.
Please let me know if anyone having idea on this. I will reward to you with the valid points.
Regards
raghu.

Hi Raghu,
I have searched and found this information, check it may help you
Check the SY-UNAME with the the name of the Plant
User Plant user data take it from T001W table
and All logon User data will be in USR02 table
take the data from corresponding tables and check.
If you are working in SRM
Use FM BBP_READ_ATTRIBUTES to get the User plant after passing the User ID to the FM.
in SUIM go to Users by Complex Selection criterion.
In that there would be the Authorization Object..select an object which has the value plant in it and enter the value inthat....
Also u can enter WERKS value as 1120 in the object field and get the list,
Regards,
Satish

What are the names of the flowers on Apple TV screen saver?

what are the names of the flowers on Apple TV screen saver?
I am looking for the the botanical names...
Would anyone know where to find the credits for the photos used on the flowers screen saver?
-carol8ne

You can stream from a Mac via itunes selection (iPhoto events or a folder) - it has 8GB of solid state temporary storage, but quite how things are cached/flushed from here is a bit of a mystery - you cannot say designate 2GB to hold photos or prioritise photos over other material.
Even rentals seem to flush if you've watched them and they haven't expired - relative fell asleep during a rental yesterday so i suggested she watched it today and it downloaded from scratch again, and the AppleTV hadn't had anything but music playing in the interim. Silly this really. There's a post on another section where someone used 17GB of their data allowance to watch a HD movie as it kept reloading!
Yes you can stream photos from iPod/iPad using Airplay, but to be honest i don't think ATV2 offers that much over ATV1 for photos (yet anyway), and in some ways it's inferior.
ATV2 is far more responsive/uses less power etc but I'm not convinced you get anything groundbeaking unless you have a lot of guests who could use it via Airplay from their iphones (and with ipads currently without cameras, photos would have to come from somewhere else in the first place).
Message was edited by: Alley_Cat

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

Currency field on a selection screen of type 'DMBTR'.

Hello ABAPers,
      Could you please tell me how to do it?
       I have a currency field on a selection screen of type 'DMBTR'.
       When i input and press the enter key ,i want the value to be displayed in the following style.
          1. CURRENCY     EQ    'JPY'
                EX:
                      Value before pressing EnterKey =   123456
                      Value after pressing   EnterKey =    123,456
                  i.c the value should be displayed without decimal point
        2. CURRENCY      NE    'JPY'
                EX:
                      Value before pressing EnterKey =   123456
                      Value after pressing   EnterKey =    123,456.00
                  i.c the value should be displayed with decimal point
      Note:The above trick has already been done on a standard dynpro screen of Tr.Code FB60 and Field 'Amount'.
<removed_by_moderator>
Thanks and Regards,
Mohan
Edited by: Govindasamy Mohan on Oct 8, 2009 6:22 PM
Edited by: Julius Bussche on Oct 9, 2009 1:36 PM

Hi ABAP Lover,
   Thanks a lot for your reply.
   I had the same idea as yours like using data type 'P'.
But, the problem is that there is only one currency field on the screen .There is also a field of 'Company Code'.
Both fields are mandatory .
Hence,the requirement is to convert the currency value to the currency of the company code which is input .
The conversion should yield the following output on the screen after pressing the enter button.
1. When currency EQ 'JPY' , the value should be displayed without decimal point
2.When currency NE 'JPY' , the value should be displayed with decimal point
I am very sorry for not explaining you clearly in my first posting.
Thanks and Regards,
Mohan

Can you "combine" criteria for 2 or more fields on a Selection Screen?

Good day everyone,
Here's my question: I understand that I can put fields on a Selection Screen and pre-fill them with data values. In this particular case, I want to pre-fill a couple of hidden fields with data values that will be used as criteria when I read data from the database; however, I need to pull back records that have this COMBINATION of data. For example:
WERKS     BTRTL
Z002      Z001
Z002      Z002
Z003      Z001
Z003      Z002
So in my SQL, if I say "werks IN s_werks" and "btrtl IN s_brtrl", true, it will still work. But really, I need to say "if werks = 'z002' and btrtl = 'z001', or werks = 'z002' and btrtl = 'z002', etc. I can't rely on the simple "IN" functionality because it's possible a new value could be added in the future:
WERKS     BTRTL
Z003      Z003
So if I use the "IN" logic and the record has werks = 'Z002' and btrtl = 'Z003', it would be returned. But I really don't want it returned, since a combination of werks = 'Z002' and btrtl = 'Z003' doesn't exist in my table of valid combinations.
Is this even possible to do in a Selection Screen? Do I go ahead and populate the fields separately, use the "IN" functionality, then spin through my resulting internal table and delete anything that doesn't match my "table" of valid combinations? Do I skip putting these on a Selection Screen completely and check the values in my SQL statement?
Thanks in advance -- points, as always, will be given.

Hi
Yuo can try to use FOR ALL ENTRIES option.
IF you have:
WERKS BTRTL
Z002 Z001
Z002 Z002
Z003 Z001
Z003 Z002
You should do something like that:
DATA: BEGIN OF <TAB_SEL> OCCURS 1,
       WERKS TYPE WERKS,
       BTRTL TYPE BTRTL,
      END   OF <TAB_SEL>.
WERKS BTRTL
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
SELECT * FROM <TABLE> INTO TABLE ITAB
   FOR ALL ENTRIES IN <TAB_SEL>
                   WHERE WERKS = <TAB_SEL>-WERKS
                      AND BTRTL = <TAB_SEL>-BTRTL.
In this case you need to fill correctly the internal table <TAB_SEL> with the all combinations.
Max

REPORT PAINTER - Add a field to a selection screen - custom report

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT

Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
Julien

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

How to color the text element in selection screen

hi,
i am going to pass some text element in selection screen output and my requiremnt is text element should be given some colour.
plz guide me.
regards
muthuraman.d

Hi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
   IF PA_UPD = 'X'.
         IF <YOUR MANDATORY FIELD> IS INITIAL.
              Message 'Entry is must in this field' type 'E'.
         ENDIF.
   ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
<b>Reward if Helpful</b>

Add certain field at dynamic selection screen in FBL3N transaction

Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris Kim

Hi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n

Search help to a field of a selection screen

how do we add a search help to a field of a selection screen..??

refer this code - reward if helpfull
*& Report ZGILL_VALUE_REQUEST                                         *
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

Name of the field on teh Selection Screen

Similar Messages

Maybe you are looking for