Namspace in front of tag

Hi,
in the IR I have an XSD wich is use as Msg.-Interface. During the mapping-test with this interface
I saw that namespace ns0:XXXX ist gernerarted in front of every tag. Is there a way that XI does not gernerate these namspaces in front of the tag within the graphical mapping.
Regards Bernd

Hi Stephan,
In my scenario as well we are facing similar problem, However I have removed the "ns0" from appearing in start of each node except the root node.
Earlier my XML looks like this:
- <ns0:Document xmlns:ns0="urn:iso:std:iso:20022:tech:xsd:pain.001.001.02">
- <ns0:pain.001.001.02>
- <ns0:GrpHdr>
<ns0:MsgId>PANC6_20090825</ns0:MsgId>
<ns0:CreDtTm>2009-08-25T23:37:59</ns0:CreDtTm>
<ns0:Authstn>PANCT</ns0:Authstn>
<ns0:NbOfTxs>5</ns0:NbOfTxs>
<ns0:CtrlSum>171950400</ns0:CtrlSum>
<ns0:Grpg>MIXD</ns0:Grpg>
- <ns0:InitgPty>
Now, after removing the ns0, except from the root node, it looks like this:
- <ns0:Document xmlns:ns0="urn:iso:std:iso:20022:tech:xsd:pain.001.001.02">
- <pain.001.001.02>
- <GrpHdr>
<MsgId>PANC4_20090826</MsgId>
<CreDtTm>2009-08-26T15:42:44</CreDtTm>
<Authstn>PANCT</Authstn>
<NbOfTxs>1</NbOfTxs>
<CtrlSum>41500000</CtrlSum>
<Grpg>MIXD</Grpg>
- <InitgPty>
Is their any possible way by which we can remove it from root node also?
Thanks & Regards
Amol

Similar Messages

How to add image of Front panel TAGS to html report?

I have a VI with several tabs some of which I would like to append to an HTML report. So far I have managed to include just the front panel front tab (using the Append Front Panel Image to Report.vi. Is it possible to create an image of the tabs in order to append to my report?
I'm using LabVIEW 7.1 on windows 2000
Thanks for any help. It would be greately appreciated.
Eduardo

Hello Eduardo,
In order to accomplish this, you'll need to use the Append Control Image to Report VI in a loop. On each iteration of the loop, programmatically change the Tab Control page (with a local variable or the Value property), then append the tab control image to the report. That way you'll have N images in the report, where N is the number of pages in your tab control.
Hope this helps,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Z97g43 connect front panel audio to computer case

I have z97g43.
Front panel audio computer case to mainboard not work.
i have connect:
JAUD1
mainboard chassis ( all pin available connected )
mic_L mic_L
mic_r mic_power
headphone_r headphone_r
headphone_L headphone_L
ground ground
not connect:
Sense send
mic detenction
headphone detenction
what is the right schematic connect?
thanks

What case do you have? If it is an older case with AC97 audio then you would need to purchase something like one of these: http://www.amazon.com/s/?ie=UTF8&keywords=hd+audio+front+panel&tag=googhydr-20&index=electronics&hvadid=54539991636&hvpos=1t2&hvexid=&hvnetw=g&hvrand=11069445173547096755&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_2w99a9udvo_b
I simply got me an inexpensive case for my last upgrade since I also needed front panel USB 3 and up to date card reader in addition to the HD audio. My case was only $10 more (free shipping at time of purchase ) than the front panel module I needed so I got the new case you see in my signature instead.

Display a blog post's tags

I can assign tags to a blog post but I can't figure out how to display the assigned tags on each blog post. How do I show just the tags for one post?

I would like this feature too, specifically for usability purposes.
Currently the only way to display tags is as a list of all tags across the blog. If a user clicks thru to a tag archive (archived blog posts grouped by tag instead of date) there is no way to indicate exactly what this group of blog posts is. How does the user know they are looking at what they want? How do they know if they accidentally clicked on a wrong tag?
In fact, how does anyone know what tags are assigned to any given blog post?
Moreover, listing individual tags in a blog post is an invitation to click to further, related content. What Google does with my tag list has no bearing on what my site visitors do while they're on my site. I want my site visitors to click thru to more content and to know where they're at in the midst of all the blog posts. This has been standard convention for a really long time now.
This lack of front-end tag functionality effectively renders BC's tagging system useless, as Liam already noted.
Final thought: I've been working with Wordpress since before there was a Wordpress fork, and I have never seen a blog post's tag list count against it in search engine rankings. If anything, the tag archive page provides another page to index and all my Wordpress sites show a fair number of visitors coming from SERPs to the tag archive page.

Accssing xml tags with name space

<XML>
<A> Text line 1 </A>
<A> Text line 2 </A>
<A> Text line 2 </A>
</XML>
I need to know how to Create and access the tag values using name space. could you send me the code please ?
Thanks

Hi:
If you want to use namespace in XML file. You have to define a DTD file or Schema file. Those file you created to validate the XML file. So you can also define a namespace in DTD and Schema or not.
When you define a namespace in DTD or Schema, you can use a prefix in front of tag name.

Apple script to batch rename files by deleting tags on front and back of the file name

Hi, I'm trying to rename a couple thousand files from their current format: "01074_Something Of A Dreamer_Mary-Chapin Carpenter.lrc"
                                                                                                                       "01075_Where Did We Go Right_Lacy J. Dalton.lrc"
                                                                                                                       "01076_Everybody's Reaching Out_Crystal Gayle.lrc"
                                                                                                     To simply: "Something Of A Dreamer.lrc"
                                                                                                                       "Where Did We Go Right.lrc"
                                                                                                                       "Everybody's Reaching Out.lrc"
I just want to delete the number tag on the front and the artist name at the end for all of the files. I imagine a Script to do this wouldn't be too hard to write, something along the lines of read file name after the first '_' character it reads until it reads a second '_' character and rename the file to the string it reads between those two underscores with .lrc at the end.
Unfortunately I know nothing about Apple Script other than it seems like the thing I would need to automate this process based on my limited google searches. If someone could help me out with some advice on how to go about making this script or obviously if you simply have and/or can quickly write a script to do this it would be greatly appreciated!

Here:
tell application "Finder"
repeat with this_file in (get files of window 1)
set the_name to name of this_file
set temp_name to items ((offset of "_" in the_name) + 1) thru -1 of the_name as string
set temp_name to (items 1 thru ((offset of "_" in temp_name) - 1) of temp_name as string) & items -4 thru -1 of the_name as string
set name of this_file to temp_name
end repeat
end tell
(123647)

CLA Tags - will adding a '#' in front of the tag screw up Requirements Gateway tracking?

I find it useful in the practice exams to add a '#' in front of the tag comment - eg. #[Covers: UI1]
This adds the comment to the bookmarks list so I can easily see and jump to my tags later.
Will adding the # upset the marking? Technically the comment sitll fulfills the requirement as stated in the instructions, but I would hate to flunk out just because RG failed to recognise them! Anyone got any experience of RG or of marking the CLA?

Coincidentally, I now prepare a presentation (Germany) touching this special topic.
If you use Covers-Stements only in comments of block diagram, the thing with the # works.
(the # must be before the brackets AND the # must be either at the begin of a comment or preceeded by a space or newline
-> if you would write "#[Covers: A]#[Covers: B]", bookmark manager wouldnt find the second)
Generally, your trick is only useful, when you restrict using your covers-statements only in areas, where they are also
acessible by the bookmark manager.
But in the CLA exam, I find it also useful to make a documentation of front panel elements or fill the documentation
section of a vi and use covers-tags also there -> these wouldn't be found by the bookmark manager.
If you still have enough preparation time, why not install an evaluation version of NIRG and try yourself what is possible?

ITunes + Front Row + New Sorting Tags = suck

Well...maybe it's not broken, but it's annoying. I LOVE the new sorting tags. But they don't apply in Front Row. Is this the same for everyone else? Does anyone have a workaround?

I've had to take my seasons (southpark) and actually separate them by seasons in iTunes rather than have them all grouped under Southpark. In iTunes under TV Shows each season is listed as Southpark Season 1 for the show name.
If I didn't do this then they all were grouped together when viewing.

Lync 2013 Front End SIP/2.0 500 Compression algorithm refused

I've deployed a brand new Lync 2013 environment hosted on Windows Server 2012 R2 that is currently in co-existence mode with my Lync 2010 environment.
I have SCOM 2012 monitoring the environment and it recently started reporting that one or more of my front end servers
was in a critical state. Diving into it revealed the following perf counter threshold was being tripped:
Time Sampled: 3/26/2014 2:33:30 PM
Object Name: LS:SIP - Responses
Counter Name: SIP - Local 500 Responses
Instance Name:
First Value: 14287
Last Value: 14340
Delta Value: 53
Using OCSLOGGER.exe on the front end to capture logs, i trapped the following:
TL_INFO(TF_PROTOCOL) [11]9138.1C58::03/26/2014-19:12:39.098.0022c780 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[120713120] $$begin_record
Trace-Correlation-Id: 120713120
Instance-Id: 7D80EB
Direction: outgoing;source="local"
Peer: poolA.contoso.com:63820
Message-Type: response
Start-Line: SIP/2.0 500 Compression algorithm refused
FROM: <sip:poolA.contoso.com>;ms-fe=FEserver1.contoso.com
To: <sip:poolA.contoso.com>;tag=F8B88CAB38613EB380773027C56D94AF
CALL-ID: 986f9f568c794ce39d33d7158376157b
CSEQ: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.154.228.225:63820;ms-received-port=63820;ms-received-cid=C3D7C00
Content-Length: 0
ms-diagnostics: 2;reason="See response code and reason phrase";HRESULT="0xC3E93C0F(SIP_E_REACHED_CONFIGURED_LIMIT)";source="FEserver1.contoso.com"
Server: RTC/5.0
$$end_record
The only recent change made to the front end servers was making the registry change outlined in this article:
http://support.microsoft.com/kb/2901554/en-us so i'm wondering if that has something to do with it.

The MSFT support person said to re-apply CU5 to the Director servers and reboot. Since this is impactful to the environment and I would have to do reboots anyway, I opted to go the route of installing the more recent update so....
Last weekend I updated my Lync environment with what I think is considered CU6, the September 2014 updates for Lync 2013 Server (https://support.microsoft.com/kb/2809243) and still no luck. The front
end servers are fine; no excess SIP 500 errors occurring there but within 30 minutes of removing the SCOM override on the Director servers the alerts started firing again.
I reinstated the override in SCOM for the Directors and had my case with Premier support un-archived. The MSFT support person said if the alerts didn't go away she was going to have to engage the Lync product group for help. We'll see where it
goes from here.
JKuta

Can you change the default code that targets a new window to change the content in a div tag instead

I created a database for store locations. I was able to display the list of stores. Here though I don't want the list to show the number in front of it... I still need to find the CSS to edit my results for this one. However, more importantly, I don't want to open my results in a new window, I want to be able to target a DIV tag instead.
This is the code that is created to display the list of stores.
{module_webapps,5665,a,,,_blank,,50,,1}
Currently it opens a blank window. I'd like to target a div tag on the right of the list area where the store info can appear.
Perhaps the gurus at adobe can upgrade this feature? Target DIVs instead of new or blank windows, or using frames. Below is the screen of the links created from the DB.
Below is the blank window that it opens.
Would like to make it open in a div to the right of the list. Not sure how to change to core code that was created to make that change.

I'm doing something wrong. I have the list showing the stores in CA
<div class="flip" id="woodcontainer" style="width: 160px; height: 23px;">
<h1>CALIFORNIA</h1>
</div>
<div class="panel">
<script>
$("#infochange").load("{module_webapps,5665,c,41140}"); /* this creates the list of stores in CA where #infochange is the DIV I am targeting.
</script>
</div>
<br />
The code for the DIV where I want the details to load.
<div id="infochange"></div>
This doesn't make sense because I need to have something in the DIV as a holder of some sort?

Using Shared Variables and Initialize Front Panel Binding (to PSP)

Hi,
I use LV DSC RT 8.2.1
I have a Vacuum System That includes signals from - Pumps failure, Valves status, Vacuum gauge, start Pump ...
Each signal is read by a FieldPoint.
All the relevant FieldPoint Channels are read by the Server (a computer in the Ethernet Network) and published to the network in the form of Shared Variables.
I have a client VI that is reading the Shared Variables published by the Server using Front Panel Binding.
Problem :
Some of the Bindings are in the mode 'Write &Read' and that causes some initialization problems.
For example - Valve #1 is Open, and then a User start running the Client VI, (the Valve #1 Status mode is 'Write & Read")
if in the VI the status of Valve #1 is closed (before running it) then the Valve status is changing to Closed.
I want the Client VI to first read the Physical status of the instrument and then to change the Value if the User changes it.
But that's seems to be a problem when using Front Panel Binding... (is it?)
I know I can Deploy a lvlib in the Client Side and Item Bind to the Shared Variables or Use DataSocket.
(Is DataSocket is a Reliable method when connecting to Shared Variables? What are the disadvantages when using DataSocket?)
What is recommended by those of you that are experienced or by NI ?
Sincerely Yours,
Amitai Abramson.

Amitai Abramson,
Hello and thanks for using the NI Forums.
I'm glad that you've read the Using the LabVIEW Shared Variable Tutorial on our website. Check out these other resources:
Network Variable Technical Overview
Troubleshooting Network-Published Shared Variables
Why Do I See Unexpected Value Change Events for Shared Variables Using LabVIEW DSC?
All You Need to Know About Shared Variables
Creating a Value Change Event for Shared Variables
Alternative Method for Using Shared Variables Between Systems in LabVIEW 8.x
What Is The Difference Between Using Shared Variables And DataSocket VIs To Access OPC Tags?
The issue that you are seeing by having "Write & Read" bound items on both the server and client side is essentially a race condition, you don't know which one is being read/written at what time. To resolve this issue I would take a look at some of the documents below.
Using a Local, Global, or Shared Variable in Parallel Loops Can Cause Race Conditions
Using Local and Global Variables Carefully
Tutorial: Local Variable, Global Variable, and Race Conditions
Locking a Shared Resource or Variable in LabVIEW Using Semaphores
You mentioned not wanting to have two sets of shared variables (one on each side), but this is a great method to resovle this issue, that, or you can develope some sort of hand shaking to prevent these race conditions.
I would suggest that in the future when using these forums you try to ask only one question per thread and make it more concise. It's hard to tackle multiple questions and such broad questions as "I want to know all the ways that I can connect to Shared Variables, and I want to know the advantages and disadvantages." I suggest this because we want you to get your questions answered and more concise questions will result in quicker and better answers.
Message Edited by Ben S on 10-01-2009 06:05 PM
Ben Sisney
FlexRIO V&V Engineer
National Instruments

ITunes ID3 tags handling for artwork

I have created MP3 versions of my band's artwork for inclusion in an online radio. I am running into some issues with ID3 tags.    The MP3s show the artwork and everything just fine on my Mac. However the artwork doesn't show up in the radio software (Centova) when the files are uploaded. Because of this, I've got a crash course in ID3 tags--at least the album artwork tags.
It turns out, in ID3 tags version 2, there are no less than 15 different ID3 tags reserved for artwork--meaning you can attach up to 15 separate pieces of artwork (in theory) to each MP3 file. Here are the tag reservations:
$00     Other
$01     32x32 pixels 'file icon' (PNG only)
$02     Other file icon
$03     Cover (front)
$04     Cover (back)
$05     Leaflet page
$06     Media (e.g. label side of CD)
$07     Lead artist/lead performer/soloist
$08     Artist/performer
$09     Conductor
$0A     Band/Orchestra
$0B     Composer
$0C     Lyricist/text writer
$0D     Recording Location
$0E     During recording
$0F     During performance
$10     Movie/video screen capture
$11     A bright coloured fish
$12     Illustration
$13     Band/artist logotype
$14     Publisher/Studio logotype
Yes, you read that right, there's a tag for "A bright colored fish". So here's the rub: I'm finding that iTunes defaults album artowrk to the first position (00), which has a certain logic to it. But, I'm finding that this radio software, and some other pro level software looks for cover art in the third tag (Cover Art) be default. This makes a number of problems. It means that I'm having to find a serious ID3 tag editor to change the iTunes artowork tag from "00-Other" to "03-Cover Art" in order for it to be properly displayed.
NOW THE QUESTION: Does iTunes have any sort of method to select which "type" of cover atwork tag you want to apply to the added artwork? Or am I at the mercy of iTunes' default designation and that's that?

Apple have this help, which I guess you will have seen:
http://support.apple.com/kb/TS1468
There is a very comprehensive discussion of the issue in this post:
http://discussions.apple.com/message.jspa?messageID=8180252#8180252

ITunes Slow Writing ID3 Tags From External Drive

When adding files (music) located on my WD External Hardrive, and upon trying to add the album art, the process slows down... a lot. As opposed to when I add filed on my internal hardrive (from my laptop directly), which is a lot faster (seconds whereas from the External takes about 2-3 minutes per album of 12-16 songs)
It takes FOREVER to write these ID3 tags. Is there a way to speed this up? What gives?

Sorry, where is the file iTunes Library.itl? If you're not certain and don't know how to find out use this script: iTunesXMLPath
External drives take longer to process file operations than internal drives. Every operation in iTunes causes the database to be updated so if this is on a sluggish drive you will notice.
May help to exclude the library & media folders from any anti-virus scans. iTunes also slows up as you increase the number of playlists and the size of the library.
Are you certain your computer is running USB 2.0? What happens if you power down the computer and remove all USB devices except keyboard, mouse and external drive? (Of course this might be your usual config.) Is iTunes any faster? Are you connected to the front USB ports or the rear? The drive should not be connected through an external USB hub.
tt2

ITunes cannot read ID3 tags written by Perl module MP3::Tag?

Greetings,
Just trying to re-arrange ID3 information in a large set of MP3 files. Before I run the following Perl script, iTunes can read the ID3 tagging information. After writing ID3 inform ation to the MP3, iTunes no longer reads any tagging information from the MP3.
Does anyone have any information regarding this? There is some cryptic information in the MP3::Tag POD regarding setting the "id3v23_unsync" option but that doesn't seem to alter the impact on iTunes at all. Windows and other tag readers seem to be able to read the all ID 3v1 and ID3v2 tags just fine (including the altered fields) after running the following script.
Thanks for any suggestions/guidance anyone can provide.
Description: the following program takes an MP3 filename as input.
Action: It appends the value in the Album field to front of the TITLE Field. That's it! Easy!
#!/usr/bin/perl -w
use MP3::Tag;
MP3::Tag-> config(id3v23_unsync=>FALSE);
my $filename = $ARGV[0];
$mp3 = MP3::Tag-> new($filename);
@info=$mp3-> autoinfo;
@albnum = split(/_/, $info[3]);
$frame = $mp3-> {ID3v2}->get_frame("TIT2");
print $frame;
$mp3-> {ID3v1}->title("$albnum[0] $info[0]");
$mp3-> {ID3v2}->change_frame("TIT2","$albnum[0] $info[0]");
$mp3-> {ID3v1}->write_tag();
$mp3-> {ID3v2}->write_tag();
@info=$mp3-> autoinfo;
print $info[0]; //print ID3v1 TITLE field
$frame = $mp3-> {ID3v2}->get_frame("TIT2");
print $frame; //print ID3v2 Title2 field
$mp3-> close();
Thanks!
GL
Windows XP

SOLVED
Changing the config entry (Line 3 in original listing) to:
MP3::Tag->config("id3v23_unsync",0);
fixed the problem with iTunes.
NOTE: This means that iTunes version 7.x still has the synchronization problem alluded to in the documentation (POD) for this Perl module. I just had the syntax wrong to set the workaround parameter.
That aside, iTunes 7.2 works quite nicely with the modified MP3. Artwork (even though this was a modified and obscure (and legal) Bible audio, it found additional information about the MP3 in the online database).
Kind Regards,
GL
Windows XP

ITunes "grouping" tag - ID3 tags and file rewriting

From Wikipedia's entry about ID3 tags:
"ID3v2.2 and 2.3 require that the tag data precede the file. Whilst for streaming data this is absolutely required, for static data it means that the entire audio file must be updated to insert data at the front of the file. For initial tagging this incurs a large penalty as every file must be re-written."
So what I'm wondering, essentially, is whether the "grouping" tag in iTunes is a part of the ID3 tag information, which would mean that altering this tag necessitates re-writing the entire file. I don't like the idea of this, because I'd be paranoid/anal about the possibility of introducing errors in the process. However, I'd love to use the "grouping" tag for creating smart playlists. So does anyone have any more information about this tag? Thanks.

iTunes uses the TPE2 frame tag for grouping. This is also known as the 'Band/Orchestra/Accompaniment' frame which is included in the list you linked to. This isn't a guess - I've been playing about with dnuos and querying id3 tags in mp3 files. I can confirm it is a id3v2 frame.
As to having to re-write the entire file. Yes this is likely but the id3v2 standard also covers padding which can be used to avoid a complete re-write in these situations. Whether or not this happens in the case of iTunes I couldn't tell you.
As far as worring about quality or reliability when performing this... If a player (in this case iTunes) can't even write some tags you probably need to be worrying about using it full stop. Damage could also happen if the storage device itself is dying but again you don't want to be using it full stop.

Namspace in front of tag

Similar Messages

Maybe you are looking for