Nano keeps restarting when PC with Windows 2000 is trying to

Please help. I'm connecting my Nano via USB to a PC running Win 2k. Every time I load the CD and start to install software and format the drive the Nano flashes off and on and the drivers don't install so I can't move forward.

Robert,
If you are using the cd to format the iPod, don't. Much better to use the latest iPod updater.
Once you've downloaded and installed the updater to your computer, run the program, connect the iPod when prompted (not before) and follow the set up proceedure.

Similar Messages

Ipod touch 2g keeps restarting when in recovery mode

The other day my ipod started restarting on it's own while I was using it. To try and fix this I restored it to it's original settings. When I plugged it into my laptop (windows 7) itunes recognized the ipod as in recovery mode. When I tried to restore the ipod in itunes, the screen of the ipod went from the usb and itunes logo to a glitchy screen (it was shutting off and restarting, thus losing connection with the laptop) and then back to the usb screen. Ultimately, I got a 1611 error. I've tried all the suggestions for the 1611 error online (using a different computer, change usb port, put in dfl mode, etc.) but no matter what I do, my ipod keeps restarting when it's restoring. Help!

Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
If you tried everthing above
(from:
http://support.apple.com/kb/TS3694#error1611)
Then you appear to have a hardware problem. I would make an appointment at the Genius Bar of an Apple store to confirm.

Mac Pro keeps crashing when using with KVM. where to start my investigation

hi guys.
i have recently ordered ATEN CS-1762 KVM switch (2 ports model) to control my Mac and PC with a single keyboard and mouse. This KVM supports USB and DVI. the problem i have is Mac crashing when i switch from PC. I contacted mfg lately and they are unaware of this issue due to not having Mac Pro to test with this appliance. They have tested it with Mac Mini, G4 and G5 though and all was OK. based on this they put a description that this box is compatible with Mac. Anyway, being relatively new Mac user i ask for your help.
here are my steps and some ATEN's thoughts:
1. accroding to ATEN tech support, i should power up my second computer after the first one was started and is running. firstly i start the Mac Pro, 5 mins after that i power up my PC.
2. When both computers are up and running (Mac is in KVM focus), i switch to PC and all seems OK. I have noticed though that if NumLock is activated during the PC session, I won't be able to switch back to Mac. However, even though NumLock is OFF i still may have troubles when switching back to Mac. So it is not the rule, but maybe the clue to start with..
NOTES:
1. if i start PC first, Mac won't start at all. The power led will be on, but there will be no picture on the monitor and it won't accept any keyboard/mouse inputs as well as it will be network inaccessible.
2. I tried looking into Mac's logs but need your help in getting this clear.
here is the log. as you will see it stops at 13:04 and then continues at 13:08 after reboot.
i've seen some parallel's VMs but i don't have Parallels installed. i used to have it, but then it never happened to work so i deleted it from the machine. can this be the case it is still somewhere?
pls guys, any thoughts are very welcome!!!
PS: i can cause Mac to crash the same way if necessary or if log looks inclomplete. the thing forgot to mention is: when Mac crashes and i reboot it, it will not necessarily boot up completely. i've noticed that i would have to reset the KVM switch prior to Mac's successful start up. so maybe i copied the wrong log (not the one immediately after the crash). pls advise here
Alex
EDIT: specs for machines are:
Mac Pro dual 2.6GHz, 1GB (+1GB aftermarket added half a year back, works perfectly), HDD 260GB, Nvidia 7300 256Mb.
PC - Supermicro dual xeon 1.6GHz, 4GB Ram, 4 x 36GB SCSI, Nvidia 5200 256 MB with Windows 2000 Server.
Apr 18 13:03:38 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 18 13:03:38 localhost kernel[0]: PAE enabled
Apr 18 13:03:38 localhost kernel[0]: 64 bit mode enabled
Apr 18 13:03:38 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 18 13:03:38 localhost kernel[0]: vmpagebootstrap: 512109 free pages
Apr 18 13:03:38 localhost kernel[0]: migtable_maxdispl = 71
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: 77 prelinked modules
Apr 18 13:03:38 localhost kernel[0]: ACPI CA 20060421
Apr 18 13:03:38 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=7 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=6 Enabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Apr 18 13:03:38 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 18 13:03:38 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 18 13:03:38 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: Started CPU 01
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: Started CPU 02
Apr 18 13:03:38 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 18 13:03:38 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Apr 18 13:03:38 localhost kernel[0]: Started CPU 03
Apr 18 13:03:38 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Apr 18 13:03:38 localhost kernel[0]: Security auditing service present
Apr 18 13:03:38 localhost kernel[0]: BSM auditing present
Apr 18 13:03:38 localhost kernel[0]: disabled
Apr 18 13:03:38 localhost kernel[0]: rooting via boot-uuid from /chosen: BE5A00F3-0C3D-4125-9DE4-3F2193D3DAA8
Apr 18 13:03:38 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 18 13:03:38 localhost kernel[0]: USB caused wake event (EHCI)
Apr 18 13:03:38 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0016cbfffe6cfb5c; max speed s800.
Apr 18 13:03:38 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3160812AS P Media/IOGUIDPartitionScheme/Customer@2
Apr 18 13:03:38 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Apr 18 13:03:38 localhost kernel[0]: jnl: replay_journal: from: 3560448 to: 7934976 (joffset 0x48b341000)
Apr 18 13:03:38 localhost kernel[0]: HFS: Removed 9 orphaned unlinked files
Apr 18 13:03:38 localhost kernel[0]: Jettisoning kernel linker.
Apr 18 13:03:38 localhost kernel[0]: Resetting IOCatalogue.
Apr 18 13:03:38 localhost kernel[0]: PXS1: family specific matching fails
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 1
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: Matching service count = 2
Apr 18 13:03:38 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 18 13:03:38 localhost kernel[0]: PXS1: family specific matching fails
Apr 18 13:03:38 localhost kernel[0]: Previous Shutdown Cause: 3
Apr 18 13:03:38 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 18 13:03:38 localhost mDNSResponder-108.4 (Jan 8 2007 20: 39:46)[30]: starting
Apr 18 13:03:38 localhost memberd[38]: memberd starting up
Apr 18 13:03:38 localhost DirectoryService[42]: Launched version 2.1 (v353.6)
Apr 18 13:03:39 localhost lookupd[44]: lookupd (version 369.6) starting - Wed Apr 18 13:03:39 2007
Apr 18 13:03:39 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:01:63:16
Apr 18 13:03:39 localhost configd[34]: No AirPort Driver found.
Apr 18 13:03:39 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:01:63:17
Apr 18 13:03:39 localhost diskarbitrationd[37]: disk0s2 hfs FDAB59BA-2B84-3AD5-AF66-4BD8CFA20261 Macintosh HD /
Apr 18 13:03:40 localhost lookupd[55]: lookupd (version 369.6) starting - Wed Apr 18 13:03:40 2007
Apr 18 13:03:42 localhost kernel[0]: Intel8254x -- Link Up -- 00:17:f2:01:63:16 -- called by interruptOccurred() --
Apr 18 13:03:42 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 18 13:03:42 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x41e1, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Apr 18 13:03:42 localhost mDNSResponder: Adding browse domain local.
Apr 18 13:03:43 localhost loginwindow[62]: Login Window Started Security Agent
Apr 18 13:03:46 localhost kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:63:17 -- called by enableHardware() --
Apr 18 13:03:46 localhost kernel[0]: -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0, Gig Advertise Reg (09d) = 0xe00, Gig Link Partner Ability Reg (10d) = 0x4000
Apr 18 13:03:46 Alexs-Computer configd[34]: setting hostname to "Alexs-Computer.local"
Apr 18 13:03:46 Alexs-Computer TabletDriver[71]: RunApplication called while eRelaunching
Apr 18 13:03:52 Alexs-Computer configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 18 13:03:52 Alexs-Computer configd[34]: posting notification com.apple.system.config.network_change
Apr 18 13:03:52 Alexs-Computer lookupd[82]: lookupd (version 369.6) starting - Wed Apr 18 13:03:52 2007
Apr 18 13:03:52 Alexs-Computer ntpdate[94]: can't find host time.euro.apple.com\n
Apr 18 13:03:52 Alexs-Computer ntpdate[94]: no servers can be used, exiting
Apr 18 13:03:55 Alexs-Computer configd[34]: target=enable-network: disabled
Apr 18 13:04:15 Alexs-Computer configd[34]: posting notification com.apple.system.config.network_change
Apr 18 13:04:15 Alexs-Computer lookupd[148]: lookupd (version 369.6) starting - Wed Apr 18 13:04:15 2007
Apr 18 13:04:15 Alexs-Computer SystemStarter[41]: "/Library/StartupItems/Tablet" failed security check: permissions
Apr 18 13:04:17 Alexs-Computer kernel[0]: Parallels Workstation Hypervisor started.
Apr 18 13:04:17 Alexs-Computer kernel[0]: Parallels Workstation VMM Main driver started.
Apr 18 13:04:18 Alexs-Computer kernel[0]: comparallels_kextPvsvnic: Ethernet address 00:01:23:45:67:89
Apr 18 13:04:19 Alexs-Computer SystemStarter[41]: Parallels VirtualMachine drivers (149) did not complete successfully
Apr 18 13:08:25 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 18 13:08:25 localhost kernel[0]: PAE enabled
Apr 18 13:08:25 localhost kernel[0]: 64 bit mode enabled
here couple more logs right at the moment of crash (found in paic.log). hopefully then can shed som elight on the troubles:
pls advise
Wed Apr 18 13:04:16 2007
panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00004000, CR3: 0x01019000, CR4: 0x000006e0
EAX: 0x23a3d578, EBX: 0x00000000, ECX: 0x00001000, EDX: 0x00004000
CR2: 0x00004000, EBP: 0x2544bc18, ESI: 0x23a3d578, EDI: 0x00004000
EFL: 0x00010206, EIP: 0x0019637c, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2544b9d8 : 0x128d08 (0x3cb134 0x2544b9fc 0x131de5 0x0)
0x2544ba18 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
0x2544bb28 : 0x19ada4 (0x2544bb40 0x23a39578 0x2544bb98 0x84ae50)
0x2544bc18 : 0x84b148 (0x23a39000 0x2 0x2544bc68 0x1a1738)
0x2544bc38 : 0x8393d4 (0x2544bddc 0x0 0x2544bc68 0x4b0000)
0x2544bd18 : 0x6ca33a (0x23a39000 0x2544bdaa 0x2544bdaa 0x84)
0x2544bd78 : 0x6be697 (0x3c34000 0x2544bdaa 0x2544bdaa 0x84)
0x2544bdf8 : 0x6a72e3 (0x3c34000 0x1 0x2544be48 0x1a1738)
0x2544be18 : 0x6aee4a (0x553f8000 0x0 0x3ff96a27 0x3d87)
0x2544be78 : 0x546b55 (0x3c34000 0x2544beac 0x1 0x1a26ce)
0x2544bec8 : 0x54a1d0 (0x3a21e00 0x3 0x3f60ddf8 0x3d87)
0x2544bee8 : 0x54bc8d (0x3a21e00 0x7abf 0x5cbd220 0x5cbd160)
0x2544bf28 : 0x39c536 (0x3a21e00 0x3a40280 0x8 0x2)
0x2544bf78 : 0x13d7d9 (0x3a40280 0x3a87e78 0x0 0x0)
0x2544bfc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x397fcec) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.5.2)@0x6c9000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
com.apple.iokit.IOHIDFamily(1.4.10)@0x531000
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Wed Apr 18 17:06:26 2007
panic(cpu 1 caller 0x001A429B): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00004000, CR3: 0x01019000, CR4: 0x000006e0
EAX: 0x23a4d578, EBX: 0x00000000, ECX: 0x00001000, EDX: 0x00004000
CR2: 0x00004000, EBP: 0x25443c18, ESI: 0x23a4d578, EDI: 0x00004000
EFL: 0x00010206, EIP: 0x0019637c, CS: 0x00000008, DS: 0x04080010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x254439d8 : 0x128d08 (0x3cb134 0x254439fc 0x131de5 0x0)
0x25443a18 : 0x1a429b (0x3d0e4c 0x1 0xe 0x3d0670)
0x25443b28 : 0x19ada4 (0x25443b40 0x23a49578 0x1 0x4065004)
0x25443c18 : 0x84b148 (0x23a49000 0x2 0x25443c48 0x713bbf)
0x25443c38 : 0x8393d4 (0x25443ddc 0x0 0x25443c68 0x7116c2)
0x25443d18 : 0x6ca33a (0x23a49000 0x25443daa 0x25443daa 0x84)
0x25443d78 : 0x6be697 (0x3c61c00 0x25443daa 0x25443daa 0x84)
0x25443df8 : 0x6a72e3 (0x3c61c00 0x2 0x25443e28 0x1e)
0x25443e18 : 0x6aee4a (0x523e0000 0x0 0xfd8e30e2 0xc93)
0x25443e78 : 0x546b55 (0x3c61c00 0x25443eac 0x2 0x1a26ce)
0x25443ec8 : 0x54a1d0 (0x3a21e00 0x3 0xfcf5a332 0xc93)
0x25443ee8 : 0x54bc8d (0x3a21e00 0x1917 0x4336be0 0x4336b20)
0x25443f28 : 0x39c536 (0x3a21e00 0x3a40280 0x8 0x2)
0x25443f78 : 0x13d7d9 (0x3a40280 0x3a39ff8 0x0 0x3303)
0x25443fc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x5cb2144) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(4.5.2)@0x6c9000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
com.apple.iokit.IONDRVSupport(1.4.5)@0x6ba000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
com.apple.iokit.IOGraphicsFamily(1.4.5)@0x69f000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5e0000
com.apple.iokit.IOHIDFamily(1.4.10)@0x531000
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

ok so i experimented a little with the hardware and here what i have to the moment:
1. i thought that the usb kb could be the case for mac os to crash so i disconnected the cable from the KVM and plugged normal apple kb to the mac.
2. however when i tried switching back to mac, the machine crashed again.
from what i noticed for the last few days 'working' with this kvm switch was the screen resolution changing while i was switching. meaning the screen flickered for couple of times prior to showing 1280x1024 that was set up in the system. during flickering the resoution became 1024x768. i 've seen it pretty clearly, just it was for half of a second.
also when powering up both machines, they were starting with 1024x768 and not 1280x1024 as was set up. i had to manually change the screen resolution on both machines (pc and mac) every time after successful start up.
so by far my understanding is that kvm switch forces monitor for 1024x768 during switches and on start up. it also causes the OSes (win2K and MacOSX) to lose 1280x1024 and accept 1024x768 as if the monitor was changed and couldn't operate at a higher resolution.
having said that i uploaded this info to kvm mfg (ATEN) and couple more mac forums so that this info may help someone else when ordering a kvm for mac. at the same time i am still open for any thoughts, advices and crazy ideas to get round this bug.
alex

Install oracle 8.0.6 with Windows 2000

hello all,
today we have oracle 8.0.6 on NT Server ...
we need install the same release oracle 8.0.6 on new IBM server, with Windows 2000 Server ...
we are looking information about differences between config oracle 8.0.6 in NT Server and Windows 2000 Server
thanks in advance
rodolfo

My tnsnames.ora file is using SID and not SERVICE NAME.
The configuration is the same as the other NT server I am using, this is actually a new server we are trying to replace the production with. The only difference is the OS so far. I looked at all the configuration files and the only error I get is that TNS 12203 error when I try to connect to Oracle.
When I try from any client it does the same thing, TNS 12203 and no connection to database.
Could it be the OS, or does anyone know anyone that has Oracle 8.0.6 on a 2003 Server Box.
Thanks for your help guys.

Labview 2009 .exe not working with windows 2000

I created a simple vi with Labview 2009 to reset a counter in registry key. I changed it to an exe. The program runs fine on any machine with XP but it does not work on the machine I need it on which is running Windows 2000 SP4. I installed the 2009 runtime but I continue to get an error when it starts up saying the vi is not executable and that I need the full development to fix the errors. But like I said it works every where else. I've tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi that is not compatible with Windows 2000?
Thanks
Solved!
Go to Solution.
Attachments:
Serial Number Reset Cell 2.vi ‏15 KB

There was an issue with building DLLs on Windows 2000 - http://digital.ni.com/public.nsf/allkb/431C9BD8F3482033862576A90073441F. Since you say you are trying an EXE, this may not be applicable.
George M
National Instruments

My computer keeps restarting when I try to open my Dreamweaver trial version

My computer keeps restarting when i try to open my Dreamweaver trial version. I have windows xp

Do you receive any error messages? Without a more specific error messages I would recommend completing the steps listed in Troubleshoot system errors, freezes | Windows | Adobe software - http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html. Please feel free to respond to this thread if you have any questions about the steps listed within the document.

E7-00 keeps restarting, when network coverage is l...

After upgrade to Belle refresh, my Nokia E7-00 keeps restarting when network coverage is very low, or gone.
I think, that this is an issue related to the phone's network connection, because the problem of the phone restarting is non-existing, when the phone is in offline-mode, and the problem is non-existing, when network connection is good.
The problem did not exists before upgrading to Belle-refresh.
Anyone experienced this, or any ideas to solve the problem´?
Tanks in advance.
Best regards
Helgefr
Solved!
Go to Solution.

@Helge1982
Any difference in behaviour if you set to GSM rather than Dual in Menu > Settings > Connectivity > Network > Network mode?
Happy to have helped forum with a Support Ratio = 42.5

Is the JDK (1.2.2) compatible with Windows 2000 Pro?

Hi Friends!,
It seems that the JDK - Version: 1.2.2 - is not
compatible with Windows 2000 Pro. I know
how to configure the kit in this operating system
even if I'am not able to understand the reason for which
I receive the error in the Command Prompt window - the JAVAC
utility says:
"Can't read: BigDebt.java - 1 error".
I have added the following command line from
the System Control Panel->System->Environment->System Variables:
C:\jdk1.2.2\bin ( where I have installed the kit ).
I also have added the CLASSPATH command line there:
set CLASSPATH=.;C:\jdk1.2.2\lib\tools.jar but the problem persists
and I'am unable to create the BigDebt.class file.
To avoid another nervous wreck please send me the instructions
to configure correctly the JDK (1.2.2) for Windows 2000 Pro.
Thanks.
Julian Jerman - from Italy.

when you runs the java compiler like this
javac BigDebt.java
You need to be in the directory of your BigDebt.java file located.
BTW, it is kind of weird that your java file is saved to System32 directory, there is no benefit doing that.
--lichu

IPad 1 keeps restarting when browsing or even sometimes when I try to log on to Ipad

IPad 1 keeps restarting when browsing or even sometimes when I try to log on to Ipad

IPad is up to date with iOS5

Default Strata navigation buttons used to have colors besides blue with Windows 2000.

I recently moved from Windows 2000 to Windows 7 and noticed that the default Strata navigation buttons are now all blue. For example, with Windows 2000 the stop "X" was red and the "Forward" and "Back" arrow buttons were green. No biggie, but is there any way to get these colors with the default navigation buttons in Windows 7?
Thanks!

Hello and thank you for the reply!
While I am waiting for the issue to start up again, I'd just like to cover some things you mentioned in your post. :)
I only updated the bios because I was originally experiencing these issues. It was a method to hopefully resolve them, which did not work. I was very careful, and the process was a success. I updated to the most recent recommended driver for my motherboard
from the manufacturers.
As for Auslogics Boost Speed, it is not running on my computer, as it is a piece of software I only have used to clean junk files (cache/temp) for a very long time now with no issue. I have also tried updating all of my drivers with success, however that
did not solve the issue either. I even rolled back my network card driver just in case with no luck.
I have not thought of disabling my audio driver yet, being how it effects far more than just my audio when it happens. My mouse is jittery/laggy as well when no sound is playing. But other tests have shown that it may be a network issue. Next time it happens
I'll temporary disable my network drivers to see if that causes the issue to clear up.
I will be sure to mark answers which help appropriately. Thanks again! I should return with the information requested from Zigzag's wiki within 2 days of on-time, when this happens again.

MXI-3 blue screen when updating to windows 2000 service pack 3 or 4

I have na host computer with windows 2000, and a PXI chassis connected through MXI-3 (cooper wires). I have a 6025E, a 5102, a 5112, a pickering DMM, and two pickering switch-cards in it. Updating windows is not possible. It didn't work months ago when windows 2000 service pack came out and it doesn't work now with windows 2000 service pack 4 -Blue screeen of death is the verdict!
Any ideas about the posible problem and a cure?
Scientia est potentia!

Hi Magvar,
The first thing we need to determine is the cause of the problem. Right now, I see two possible causes. First, the problem could be with the OS on your computer. Second, the problem could be with the MXI-3 interface. In order to determine which is causing the blue screen, I recommend removing the PCI-MXI-3 board from the computer before you install the service pack. If the service pack will successfully install, then we know the problem was with the MXI-3 board. You can then try to reinstall the board. If the installation is not successful, then we know the problem is not connected with the MXI-3 system. In that case, you may need to contact Microsoft for further assistance.
Regards,
David Shatila
Applications Engineer
National Instrume
nts

Msi GeForce 4 4200 frame rate locked at 60 with Windows 2000

Lost here..... I have an MSI Geforce 4 4200 120MB Video Card slotted on an Asus A7V motherboard - AMD Thunderbird 1Ghz processor with 640mb of ram.
There is a common problem with the Nvidia chip and Windows 2000 in regards to a lock frame rate at 60fps within games.
I've tried several programs to fix this i.e. "Refresh Lock", "Windows 2000/XP Nvidia Refresh rate lock", "PowerStrip 3.15" and "NVFresh Tool 1.0"
But nothing seems to work. I'm sure these program work with older Nvidia cards but not with GeForce 4.
Any Ideas? I even turned the Vsync off and on.
HELP!

p-fulla, I'm not to sure about your system and Windows XP but check out these tweeking sites.
GEFORCEZONE.COM
http://www.geforcezone.com/
and
TWEAKED.NET
http://www.tweak3d.net/
TECHTV.COM/SCREENSAVERS
http://www.techtv.com/screensavers/
(A little advice: If you can, dump XP and install a copy of Windows 2000 second edition. They both have the same KERNAL but I find that Win 2000 is much more compatible for now. I give XP 2 more years before it's the OS for all. I've reinstalled 6 systems with Windows 2000 because of compatibility problems.)

Working with Windows 2000 ?

Hello, I'm new to Java but been programming 15 years, hell knows why I waited till now to use Java but it is great !
I want to write some applications that control and work with Windows 2000. I realise they would not be platform independent but is this sort of thing possible ?
or .... just as an example what if I wanted to control some feature of the linux os ?
thanks
C

It is possible. All you need to know is how to use JNI. I think there are only two books out there about JNI, I would recommend the one from Sun.
You can download it here: http://java.sun.com/docs/books/jni/index.html

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Is Firefox 8 compatible with Windows 2000 Pro? Would be nice if you could find the system requirements easily.

I know I am using an older system. Get notices to upgrade. Need to know if these upgrades are compatible with W2000Pro.

Yes Firefox 8 is compatible with Windows 2000
Full system requirements: [http://www.mozilla.org/en-US/firefox/8.0/system-requirements/ http://www.mozilla.org/en-US/firefox/8.0/system-requirements/]
Thanks!
handsomeorlandoman

Nano keeps restarting when PC with Windows 2000 is trying to

Similar Messages

Maybe you are looking for