NAT proxy and secondary IP

Hello!
I have 2 NIC on my BM38SP5 box
Internal has 1 IP
External has 2 IP (primary and secondary)
I am using dynamic NAT.
Now dinamic NAT and proxy use one IP address together - primary.
I want make dynamic NAT use one external IP (primary) and proxy use another
external IP - seconadary (some billing reasons)
How can I do that thing?
WBR, Viktor

Thanks, Craig
"Craig Johnson" <[email protected]> ???????/???????? ? ????????
?????????: news:[email protected]..
> In article <BQlii.2059$[email protected]>, Tanin Viktor
> wrote:
>> I want make dynamic NAT use one external IP (primary) and proxy use
>> another
>> external IP - seconadary (some billing reasons)
>>
>> How can I do that thing?
>>
> You cannot make dynamic NAT use one, and proxy use a different address,
> for
> outbound browsing. Basically, the proxy will send on the primary public
> IP
> address.
>
> You CAN use static NAT to map one internal host to the secondary public
> address. OR, you can set up a generic or reverse proxy to listen on the
> secondary public address for inbound connections.
>
> Craig Johnson
> Novell Support Connection SysOp
> *** For a current patch list, tips, handy files and books on
> BorderManager, go to http://www.craigjconsulting.com ***
>
>

Similar Messages

How to manage VM servers in DMZ through NAT proxy?

Dear all,
We need to build some VM servers in DMZ network. And the OVM Manager is located in trust zone (behind DMZ). OVM manager can connect to the DMZ vm servers through NAT proxy. But, there are some errors after I have added the servers.
In fact, there is no management network for OVM manager. So, I seem no workaround.
Have you any idea about this deployment?
Mike

mtktang wrote:
We need to build some VM servers in DMZ network. And the OVM Manager is located in trust zone (behind DMZ). OVM manager can connect to the DMZ vm servers through NAT proxy. But, there are some errors after I have added the servers. We do not support Oracle VM Server via NAT, because the Servers get the IP address of the Manager to connect to (and not the NAT'd address). So the API python binding download and notifications will fail. It is very unlikely that this would work.

Proxy and filter on same port

Hi all,
On our BorderManager 3.8 server we've got a HTTP-proxy listening on port 8080. Now, a new external web-app requires a direct connection on port 8080 also. I thought about defining a statefull filter allowing port 8080 from internal to external for that specific site but I'm not sure if this would cause conflicts or security issues in any way. I don't think so, but because it's better to be safe than sorry....I thought I'd ask. ;-)
Arnold...

In article <_7z%j.371$[email protected]>, Arnold Jesse
wrote:
> On our BorderManager 3.8 server we've got a HTTP-proxy listening on
> port 8080. Now, a new external web-app requires a direct connection
> on port 8080 also. I thought about defining a statefull filter
> allowing port 8080 from internal to external for that specific site
> but I'm not sure if this would cause conflicts or security issues in
> any way. I don't think so, but because it's better to be safe than
> sorry....I thought I'd ask. ;-)
>
First, realize that the proxy is listening on port 8080 only for
requests coming to the proxy's IP address, so it's not going to
conflict with a request to port 8080 on a remote web site. What
should be happening here is that (on port 8080) you send the proxy a
request to a web site that uses port 8080. The proxy sends a request
to the web site using port 8080 instead of the usual port 80, that's
all.
What could well be a problem here is that the default 3.7-3.9 filter
exceptions do not allow port 8080 out from the public IP address of the
proxy. You will have to modify the default filter exceptions to allow
that traffic, whether you want to connect directly through NAT or
through the proxy. My advice is to connect through the proxy, and
modify the filter exceptions to allow the traffic.
At the least, you could configure a custom filter exception for
stateful port 8080, like the defaults. Look at the defaults in
FILTCFG.NLM to see how they are done, and add a new one.
Personally, I don't like to add custom filter exceptions one-by-one for
every non-standard web server out there. I use a more global approach,
detailed in the advanced chapter of my BMgr filtering book (see url
below).
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

NAT/ Proxy

Hello,
I'm not sure if this is possible, but here is a diagram and
explanation of what I would like to achieve.
(Inside) --- Cisco Router --- (Outside) ----[Public Internet]---- Host A
|
|
------ Host B
1) Host A connects to Cisco Router on port 5555
2) Cisco Router translates/forwards the request to Host B on port 7777
- Cisco Router is acting like a proxy/boarder gateway for Host A
- Host B only see Cisco Router connecting to it.
- Host A has no idea it's actually connecting to Host B
Any ideas would be appreciated.
--Matteo

Hi,
Yes, it's a NAT feature.
Your config would look something like this:
ip nat inside source static tcp (192.168.10.1) 777 (171.69.232.209) 555
Where 192.168.10.1 is Host B's address. 171.69.232.209 is the outside Router's address used as gateway by the Host A.
In additon to this, you would need to configure your nat inside and outside interfaces. If both hosts are connected via the same interface then you could use a feature called NAT on a stick. The following link has info on configuration NAT on a stick.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094430.shtml
Hope that helps!
Regards,
Sundar

Difference between primary eindex and secondary index?

hi experts
pls answer me
difference between primary eindex and secondary index?
rewads apply.
thanks.
naresh.

hi,
check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb2d446011d189700000e8322d00/frameset.htm
A difference is made between Primary & Secondary indexes to a table. the primary index consists of the key fields of the table and a pointer to the non-keys-fields of the table. The Primary index is generated automatically when a table is created and is created in the datebase as the same times as the table. It is also possible to define further indexes to a table in the ABAP/4 dictionary, which are then referred to as Secondary indexes.
Always it is not mandatory that an index should have all the key fields of a table. To see the index of a table
goto SE11->specify table name->click on the indexes... button on the application toolbar.
Based on your requirement you can you any of those index fields in the where clause of your query. Always its a better practice to use the index fields in the order specified. While selecting the records from a table it is always better to select the fields in the same order as specified in the table.

Need help with sorting records in primary and secondary databases

Hi,
I would like to store data into primary and secondary db in different order. For the main primary, I want it to be ordered by login_ts instead of uuid which is the key.
For the user secondary database, I want it to be ordered by sip_user. For the timestampe secondary db, I want it to be ordered by login_ts.
This is what I have right now,
this is for main
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
this is for user search
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
this is for timestamp
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200003 login_ts=1264327688 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
but what I want is :
this is for main
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200005 login_ts=1264327688 logout_ts=
this is for user search
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200003 login_ts=1264327630 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200004 login_ts=1264327618 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
this is for timestamp
uuid=e2f9a3cb-02d1-47ff-8af8-a3a371e20b5 sip_user=200003 login_ts=1264327613 logout_ts=
uuid=e1846e4a-e1f5-406d-b903-55905a2533a sip_user=200003 login_ts=1264327618 logout_ts=
uuid=029ae227-a188-4ba8-aea4-7cbc26783d6 sip_user=200004 login_ts=1264327630 logout_ts=
uuid=22966f76-8c8a-4ab4-b832-b36e8f8e14d sip_user=200004 login_ts=1264327688 logout_ts=
Right now, I have:
int compare_login_ts(dbp, a, b)
     DB *dbp;
     const DBT a, b;
     int time_a = 0;
     int time_b = 0;
     time_a = atoi ( (char *)a->data);
     time_b = atoi ( (char *)b->data);
     return time_a - time_b ;
for the timestamp secondary, I set that compare function:
          if ((ret = (*sdb)->set_bt_compare(*sdb , compare_login_ts )) != 0){
Does anyone know how can I make it sorted according?

Hi,
The DB->set_bt_compare() is used to compare keys in Btree database. In the callback function, both the DBTs are key, but not data. Please refer to http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbset_bt_compare.html.
If you want any field in the data to be sorted, you might create a secondary index on it and define the compare function as you wish.
Regards,
Emily Fu, Oracle Berkeley DB

Connection Problem while client is behind proxy and server out side proxy

hello
i implemented ChatApplication in JAVA, for that i used socket connection when client and server both are in same network then it's working fine.
but when my server is on internate and client is behind proxy and try to connect with server
it not able to connect i get exception.
i serch most of forum i got same answer and i try it but i was not success.
any kind of help is appriciated.
i attached my code(which i implement for testing ) pls reply me
thanks in advance.
Server.java
import java.lang.*;
import java.io.*;
import java.net.*;
class Server {
   public static void main(String args[]) {
      String data = "you are successfully connected with server.";
      try {
         ServerSocket srvs = new ServerSocket(1234);
         Socket skt = srvs.accept();
         System.out.print("Server has connected!\n");
         PrintWriter out = new PrintWriter(skt.getOutputStream(), true);
         System.out.print("Sending string: '" + data + "\n");
         out.print(data);
         out.close();
         skt.close();
         srvs.close();
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
ProxyClient.java
import java.io.*;
import java.net.*;
import java.util.*;
class ProxyClient{
   public static void main(String args[]) {
     String host="61.17.212.29";
     int port=1234;
           String line;
     Properties properties = System.getProperties();
     /*properties.put("firewallSet", "true");
     properties.put("firewallHost", "192.168.0.1");
     properties.put("firewallPort", "808");*/
     properties.put("socksProxySet","true");
     properties.put("socksProxyHost", "192.168.0.1");
     properties.put("socksProxyPort", "1080");
     System.setProperties (properties);
     try {
     /*SocketAddress addr = new InetSocketAddress("192.168.0.1", 1080);
     Proxy proxy = new Proxy(Proxy.Type.SOCKS, addr);
     Socket skt = new Socket(proxy);
     InetSocketAddress dest = new InetSocketAddress("61.17.212.29",1234);
     skt.connect(dest);*/
         System.out.println("before socket taken");
         Socket skt = new Socket(host,port);
         System.out.println("after socket taken");
         BufferedReader networkBin = new BufferedReader(new InputStreamReader(skt.getInputStream()));
         System.out.println("Received string: '");
         line = networkBin.readLine();     // Read one line
      while(true)
             System.out.println(line);     // Output the line
             line = networkBin.readLine(); // Read the next line, if any
      catch(Exception e) {
         System.out.print("Whoops! It didn't work!\n");
     e.printStackTrace();
}

Now look here. I could not care less about this
code. I don't know anything about it, I don't
want to know, I have already recommended you don't
use it, and I have also given you a simpler and
better solution. If you don't want to take my advice
that is your privilege and your problem.ya i has understand system propertis i have setted and u can see it in the code i have tried by both system properties and also J2SE 5.0 proxy class but i got a same problem malformed Exception server refuse to connection.
is there any problem at sever side?
can u tell me in which way u r teling to set the propery i m looking forward for ur reply.
ya i m sure u will give me.................reply "ejp".
Thnx in advance.

Sun Web Server Reverse Proxy and Weblogic HTTP to HTTPS redirection

Hi,
I am currently testing reverse-proxy from SJSW 7.0 update 5 to Weblogic server but I have encountered an issue.
I have configured a context root to be forwarded to weblogic:
Web Server: www.server.com
URI: /path
Reverse Proxy URL: wlserver:9000
When I access https://www.server.com/path, I am getting the correct page. The issue is, the weblogic server is configured to redirect HTTP access to HTTPS, i.e., when I access http://www.server.com/path, it should be redirected to https://www.server.com/path. However, that is not the case. What happens is that I am being redirected instead to https://www.server.com/.
If I don't use reverse proxy, that is, if I use the libproxy.so from weblogic, I get the correct redirection.
Would appreciate it very much if someone can help me troubleshoot this issue.
Thanks in advance!
Edited by: agent_orange on Jul 29, 2010 2:30 AM
Edited by: agent_orange on Jul 29, 2010 2:31 AM

I am not sure, how you have configured your reverse proxy since you didn't attach / refer your current configuration file. this is how I would do it..
- create a new configuration (using web server 7 admin gui , within configuration wizard, disable java option if you plan to use web server 7 only for reverse proxy)
- select this new configuration and go to reverse proxy and try to reverse proxy / to the origin server.
that is all it should need.
your obj.conf or <hostname>-obj.conf depending on your configuration should look like following snippet
<Object name="default">
AuthTrans..
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</object>
<Object name="reverse-proxy-/">
Route fn=....
Service ..
</Object>
this is all you should need..
However, if you wanted to add complexity to your configuration, you could do some thing like
<Object name="default">
Auth..
<If defined $security>
NameTrans fn=map from="/" to="/path" name="reverse-proxy-/"
</If>
</Object>
<Object name="reverse-proxy-/">
Route...
</Object>

Problem with proxy and DNS

Hello,
in our company we use Internet Explorer 8... (i know...) We also have a proxy and 4 DNS servers. Last weekend we suddenly had an issue where internet pages could not be loaded. When we did some testing with Wireshark we saw that it took a long time to query
www.google.com or www.microsoft.com. The query went from the first DNS server to the second and so on. This behaviour was shown on Windows 2008 R2 servers with Citrix and also the workstations and laptops with Windows 7.
When we deleted the DNS servers from the network settings and set the proxy ip-adres in the browser the problem was solved. So the problem had to be in DNS.
After that we deleted the list of Root Hints and the problem seemed to be solved. However, when we look in wireshark we still see that external addresses are queried againts our local DNS servers. In internet explorer we have a policy active where the proxy
is set. We have two proxies and the problem exists with both of them.
So the question is, why does IE8 still query all four DNS servers even when we have a proxy? Why is there a lot of delay there?
Thanks!

Hi,
Generally, if you configure IE with an explicit proxy:
1.User types an address
2.The address is checked for string matches against the IE proxy exceptions list
a. If matching a bypassed entry, DNS is used to resolve the name, and the client connects directly to the target IP address on port 80 (assumed), then sends a request like:
GET /something.htm HTTP/1.1
Host: fulldomainame.example.com
b. If non matching, continue
3.The client connects to its configured proxy and sends a request of the form:
GET http://fulldomainname.example.com/something.htm HTTP/1.1
(this use of the FQDN in the URL is one way you can tell that a client thinks it's talking to a proxy instead of a real web server)
4.The proxy resolves the name, connects to the target site, etc, etc
So what’s your configuration of proxy?
Alex Zhao
TechNet Community Support

Using Open DNS etc with a Verizon and secondary router

I have a Airport Extreme Base Station setup in Bridge Mode to the Verizon router. How do I add or replace the DNS server to Open DNS etc?

You need to set your desired DNS servers in the Actiontec since that is your DHCP server. When the AEBS is in bridge mode, its DHCP server is disabled.
Login to the Actiontec
Click on the My Network icon
Select Network Connections from the left menu
Select Broadband coax or Broadband ethernet as appropriate.
Click on Settings
Across from DNS Server, select "Use the following DNS Server addresses" from the pulldown.
Enter the primary and secondary DNS Server addresses for OpenDNS.
Click Apply.

Excise Duty, Cess and Secondary Cess not displaying in J1IIN

Dear Frnds,
I need a solution for Excise Duty, Cess and Secondary Cess not displaying in J1IIN ( WHILE EXCISE ) but in Invoice it is calculated correctly., ( ie., i need CENVAT Posted, not utilized
after excise invoice generated )
kindly suggest me...
Thanks & Regards
T.Arulvanan

HI.
Plz check the forllowing settings,
IMG - Logistic General - Tax on Goods Mvt - India - Basic Settings -
1. Maintain Excise Registrations -
Check Proper Indicator for Cess and other settings.
2. Maintain Company Code Settings
3. Maintain Plant Settings
4. Maintain Excise Groups
5. Maintain Series Groups
6. Maintain Excise Duty Indicators
-- Determination of Excise Duty
7. Select Tax Calculation Procedure
--Condition-Based Excise Determination
8. Define Tax code and assign it to company code
Properly maintiain fallowing settings and try again..
Prashant

JMS proxy and XA connection factory

Hi all,
I would like to ask you what is the best practice to adopt about the scenario described below.
A JMS proxy retrieves a message and processes it.
Any error could occurr during processing it and, in case of errors, the JMS proxy error handler publishes the message on ad hoc recovery destination D.
(later another app will check failed messages for fixing & republishing them into ALSB).
In that scenario we have the JMS proxy and the jms business service that, in case of errors, publishes on destination D.
Should the JMS proxy and the business service use both a XA connection factory in order to perform all the above steps in one transaction ?
Otherwise if the business service itself fails publishing on destination D, the message retrieved by the JMS proxy is lost and not re-delivered to the JMS proxy.
Or XA connection factory is not needed and could I use
Routing Options with exactly once or both are needed ?
Thanks
ferp

Hi all,
I did some tests and follow what I've achieved.
Scenario 1.
- Precondition
-- A JMS proxy with XA factory + Error Destination (MyRecoveryQueue)
-- A business service BS with XA factory that publishes into MyOutboundQueue
-- No "exactly once" routing option used calling BS
-- an error is forced in the pipeline
- Flow
-- proxy retrieves a message and try to publish it using BS
-- an error is forced in the pipeline:
--- transaction is rolled back, message redelivered to proxy
--- the message is posted to the error destination after all the retries failed
Scenario 2.
- Precondition
-- As 1. but no error is forced in the pipeline
-- the MyOutboundQueue destination queue is paused
- Flow
-- proxy retrieves a message and try to publish it using BS
-- BS fails to publish it on MyOutboundQueue (because it is paused)
--- transaction is rolled back, message redelivered to proxy
--- the message is posted to the error destination after all the retries failed
Scenario 2A.
- Precondition
-- As 2. with MyOutboundQueue paused and resumed
- Flow:
-- proxy retrieves a message and try to publish it using BS
-- BS fails to publish it on MyOutboundQueue (because it is paused)
--- transaction is rolled back, message redelivered to proxy
--- before all the retries failed the queue is resumed
--- BS succeeds to publish the message
Scenario 3.
- Precondition
-- A JMS proxy with NO XA factory + Error Destination
-- A business service BS with NO XA factory
-- No "exactly once" routing option used calling BS
-- an error is forced in the pipeline
- Flow
-- proxy retrieves a message and try to publish it using BS
-- an error is forced in the pipeline:
--- transaction is NOT rolled back, message NOT redelivered to proxy
-- so
--- no message delivered to MyOutboundQueue2 destination
--- no message delivered to MyRecoveryQueue2 destination
--- message consumed from MyQueue2 and now is lost!
To publish message into MyRecoveryQueue2 a proxy error handler has to be added and here added explicit publish to MyRecoveryQueue2.
But naturally in that case if in the proxy error handler, the explicit publish fails or any error occurrs no message is delivered to recovery queue.
So if I'm not using an XAFactory the message is auto-acknowledged as soon as it is read and I've to use XA factory if I want the message to be put back in the queue in case of errors and the retry to happen.
So both my proxy service and business service use an XA factory.
Regards
ferp

Web Application Proxy and Safari

Morning, all.
I've installed and configured the new Windows Server 2012 R2 AD FS and Web Application Proxy, and I've run into some strange problems. I had some initial problems getting it to work, the documentation is a bit thin, but I now have Sharepoint and Webmail
published to the Internet.
I'm using x.509 Certificate Authentication for Extranet.
In IE on a Windows 8.1 Surface Pro everything works. I can log in using ether a softcert or a SmartCard.
On my OS X Mac I can log in using Chrome, but Safari won't work.
Same thing on my iPad running iOS 7.0.4, Safari won't work. Interestingly enough, on my 7.0.4 iPhone it DOES work. Even more interestingly, I CAN Workplace Join the iPad using the URL https://<adfs fqdn>/enrollmentserver/otaprofile but
I can't authenticate using the URL https://<adfs fqdn>/adfs/ls/IdpInitiatedSignon.aspx.
I get to select my certificate, but after that I'm getting this error message: "Safari cannot open the page because too many redirects occurred." In the Event log on the AD FS server I'm getting this:
Encountered error during federation passive request.
Additional Data
Protocol Name:
Saml
Relying Party:
http://<adfs fqdn>/adfs/services/trust
Exception details:
Microsoft.IdentityServer.Web.InvalidRequestException: MSIS7042: The same client browser session has made '6' requests in the last '0' seconds. Contact your administrator for details.
at Microsoft.IdentityServer.Web.Protocols.PassiveProtocolHandler.UpdateLoopDetectionCookie(WrappedHttpListenerContext context)
at Microsoft.IdentityServer.Web.Protocols.Saml.SamlProtocolHandler.SendSignInResponse(SamlContext context, MSISSignInResponse response)
at Microsoft.IdentityServer.Web.PassiveProtocolListener.ProcessProtocolRequest(ProtocolContext protocolContext, PassiveProtocolHandler protocolHandler)
at Microsoft.IdentityServer.Web.PassiveProtocolListener.OnGetContext(WrappedHttpListenerContext context)
Since it does work on an iPhone running the same browser, and Workplace Join does work on the iPad even if nothing else does I'm thinking there's some UserAgent voodoo going on in parts of the Web Application Proxy. It's no big deal that Safari in OS X doesn't
work, we can always run Chrome, but the iPad is a major problem and a total deal breaker if I can't fix it.
I would appreciate some good advice.

Hi,
As both IE and Chrome work, I think it’s more a client side issue.
Maybe you need to clear you browser cache and cookies.
This also worth a try:
http://stackoverflow.com/questions/2640030/adfs-v2-0-error-msis7042-the-same-client-browser-session-has-made-6-request
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.

Web service proxy and security constraint

I've placed a security constraint on my web service and set the login-config auth-method as BASIC. When I run the Workshop test and the (Test View) browser begins to appear I am prompted for my username and password since it is protected --- great, it's working.
Here's my problem, when I create the Java Proxy and try to access the web service using the proxy in another application I am never prompted for my username and password and thus the request fails. Anyway to fix this so I can be promted using the proxy??
thanks in advance,
Steve Touw

Hi Shay Shmeltzer,
Thanks for the reply.
I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
Please Help.
-- NavinK

Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application

Hi Expert,
I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
I would know if the NGINX must be used also for SMP 2.3.
Any suggestion/information is appreciated.
Thanks in advance
g.

Please see Agentry Network Landscapes

NAT proxy and secondary IP

Similar Messages

Maybe you are looking for