Skip Date

hi,
In QP01 We enter DMR level :dynamic modification at lot level for which DMR rule:SKIP w.rt to plant,vendor and material combination using change number we want to take a list on which date the skip is activated for materials.suggest steps at earliest....

HI
There are few reports in ECM , where u can find the details aganst the material w.r.t change number and their related inspection lots. Goto Cross-functional application -
> Engineering Change management -
> Info- system ECM.
Regards

Similar Messages

Error: An error occurred while skipping data rows

I am constantly getting error message “Error: An error occurred while skipping data rows”. Here is my scenario:
I am pulling data from a text flat file which is Vertical Bar {|} delimited. My data source files naturally come without headers (no column names on first row). So what I did to bypass
this is –
I used a control file to supply the header names when I developed my package. This control file’s column names have corresponding column order used in the data source files.
I then added an expression to my Flat File Connection Manager so that the system should automatically pick up new incoming files (files without headers).
Now when I try to run my package I am receiving “Error: An error occurred while skipping data rows”. Could this be due to the fact that the system is expecting the column names which I
entered when I developed the package while this new file does not have any headers, or could it be something different? There is very little information on the internet about this kind of error message. The only meaningful information that I have found is
from the link below but unfortunately the case explained there is not the same as my situation.
http://social.msdn.microsoft.com/forums/sqlserver/en-US/a790460b-9ef5-482b-b219-f55c05fa30d3/error-occured-while-skipping-data-rows
I’m also aware that one can get the same error if the specified delimiter type on their package is different from the one on the flat file. Still that is not the case in my situation. Can
someone please kindly help me troubleshoot this.
Many thanks,
Mpumelelo

I have managed to address my problem. I did not have to manually enter some nearly 2000 column names by hand. Here is what I have done. I will explain it in detail for the benefit of those who might face the same problem but have no answers on how to work
around it.
I have maintained the column names from the control file because it was important for me to do this in the interest of some data flow components further down the pipeline. It therefore means that my package Flat File Source components have column names
on both the External Column and Output Column sides.
When I configured the Flat Files Source component using the control file I left the option “Column names in the first row” ticked as shown in the picture below. This is the default selection from Microsoft.
I then went to my flat file connection manager; right clicked it and selected “Properties” to get something like shown below. You will notice that property “ColumnNamesInFirstRow” is down as “True” because when configuring my flat file manager I left
that selection ticked. To address my problem I changed property “ColumnNamesInFirstRow” from “True” to “False” and saved my package. This means that during runtime the package will not use the first row as column names but will use the already predefined
column names which I entered from the control file. Please note that selecting the option of not using the first row as column names should be done from the Properties selection instead of the Flat File Source component. Changing this property from the Flat
File Source component automatically changes all the metadata whereas doing this from the Properties selection leaves the metadata on the Flat File Source component unchanged.
Mpumelelo

Last Skipped Date, Skip count, are not updated in any songs that i listen in my iPhone5s

I've been using smart playlist that's relays on the play count, last skipped date and skipped count fields... I have been using an old ipod to heard my music through this smart playlist that live updates all the time and it was working great.
So my issue is, since i bought a new iPhone 5S and start using it to listen music, my smart playlist that relays on " play count, last skipped date, skipped count " fields are not updating, and when i connect my iphone to the PC i realize that those fields never update after i play or skip any song in my iPhone.
So, I'm not sure if this is an iPhone restriction, that i need to use my iPod again to get my smart playlist that relys on those fields to work... or my iphone is defective and need to re-install the iOS.
Any help on this matter will be enormously appreciated
Thanks in advance

I have playlists that rely on the Last Skipped and
Skip Count properties of songs, but these items only
seem to be triggered if the song is fast forwarded
between 3-20 seconds into the song. I tried to skip
I think this is how it's intended, though there isn't much info on this feature. I've seen the same behavior and other users have reported same.
One thing that threw me off for a bit using this feature was trying to use with playlists where the songs had "remember playback position" checked. Last skipped doesn't register at all with these tracks.

Music last played/last skipped data rarely syncs

After playing music on my iPhone all day, when I got home, the Last Played data for only 3 of the songs was updated. This stinks because I have a smart playlist that is based on songs I haven't listened to or skipped in 30 days, but thay playlist stays the same because even after I play those songs, they rarely get updated.
Searching the site and the internet, I see this has been an issue dating as far back as 2008. It is 2011 now. Is Apple going to make the iPhone iTunes app work with iTunes libraries such that last played/last skipped data is reliably synced? Is there a workaround in place?

See this thread. You're not alone.
I agree it's very annoying:
https://discussions.apple.com/thread/2668357?start=30&tstart=0
Join in over there. Lets make some noise to get this thing fixed ASAP.
Phil

How to skip data?

Hi
I am working on a control system where a motor (bi-directional) will rotate for a specific data. When it starts rotating, motor should do this for a while and would not change it's rotation even if the data for opposite rotation comes. In that case, after starting rotation, controller has to skip out the next data for a while.
I have made a very simple program to explain the things. Please find the attached file. In loop#01 some random number will generate. In the loop#02, a comparison will be done. When A is true and B is false the output should be 5 and for opposite condition output is -5. When output is 5, this output should stay for a while (e.g 5sec) as 5. In this interval next upcoming 10 data will be skiped out (Since a wait VI is set in loop#01 and wait time is 500ms). I could not figure out how to do this. Could anybody plz help me out?
FYKI: you may find the output is -2 when both A and B are true. It may be happened because of converting the boolean into integer. I dont think it is something should be worried about.
Thanks at advance-
Taslim
Solved!
Go to Solution.
Attachments:
Skip Data.vi ‏13 KB

From what I've seen, you will be much better off using a State Machine. One of your states should be to read the data. You will also have a wait state where you should look for UI events (event structure). Another state for setting the output control.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Skipping data points in graph's axis

I just started playing with Flex and I have a question. I
have 60 data points in a graph and the 60 show in the horizontal
axis. It looks very cluttered. How can I show just one out of every
five points [0, 5, 10, ...] in the axis?
Thanks for your feedback!

"mtowers" <[email protected]> wrote in
message
news:gefa9c$107$[email protected]..
>I just started playing with Flex and I have a question. I
have 60 data
>points
> in a graph and the 60 show in the horizontal axis. It
looks very
> cluttered. How
> can I show just one out of every five points [0, 5, 10,
...] in the axis?
>
> Thanks for your feedback!
Use a filterFunction.
HTH;
Amy

Skip data points

Hi there,
In attached VI one can see a dataset from which I want to remove some data points.
I already removed the points far away from the shape I'm interested in but I struggle with some others
When you zoom the XY graph in region (X: 0 to 25 and Y: 47 to 75) or (X: 80 to 120 and Y: -5 to -30) one can see that the data points doesn't form a smooth line. It's just like if there are some "bulge" in those area's. I want to get rid of those “bulges”!
Basically I want to keep the data points that forms the smooth inner shape and remove the outer ones.
They can be deleted, no need to replace them by something else.
Any idea how I can do that ?
Thanks for any reaction.
Please note that I’m using LV8.6.
Attachments:
Test.vi ‏176 KB

Hello Alain,
The first thing that popped into my mind when reading your post was curve fitting.
This gives you the curve y=curve(x)
The second thing was eliminating the elements with an absolute deviation from the curve that is bigger than a certain percentage (eg. 5%).
In dummy code:
Delete sample(x) if ( |sample(x) - curve(x)| / |Curve(x)| > 0.05)
How you do the curve fitting is something else
There are alot of options.
An overview of some of those options can be found over here:
http://www.ni.com/white-paper/6954/en
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

ORACLE 8I SQL*LOADER DATAFILE의 특정 FIELD DATA를 SKIP하고 LOADING하는 방법

제품 : ORACLE SERVER
작성날짜 : 2002-04-09
ORACLE 8I SQL*LOADER DATAFILE의 특정 FIELD DATA를 SKIP하고 LOADING하는 방법
===========================================================================
아래의 예제와 같이 가변 길이의 filed들이 ',', '|' 와 같은 구분자로
구분이 되고 있는 경우 oracle 8i부터 제공되는 'FILLER'라고 하는 필드
구분자를 사용하여 상태인식자로 표시하여 insert시 skip할 수 있다.
<Example>
TABLE : skiptab
===========================
     col1 varchar2(20)
     col2 varchar2(20)
     col3 varchar2(20)
CONTROLFIEL : skip.ctl
load data
infile skip.dat
into table skiptab
fields terminated by ","
(col1 char,
col2 filler char,
col3 char)
DATAFILE : skip.dat
SMITH, DALLAS, RESEARCH
ALLEN, CHICAGO, SALES
WARD, CHICAGO, SALES
data loading :
$sqlldr scott/tiger control=skip.ctl
결과 :
COL1 COL3
SMITH RESEARCH
ALLEN SALES
WARD SALES

Xml conversion of data refs with dynamic type

Hi Colleagues,
I have to create an XML from a TYPE REF TO DATA, where this data is created using a dynamic internal table. By dynamic internal table i mean that the internal table is created dynamically using the class method cl_alv_table_create=>create_dynamic_table.
Now the problem that i face is when i use the statement:
CALL TRANSFORMATION id
      SOURCE jsag_data = im_context_b64
      RESULT XML lv_xml
      OPTIONS data_refs = 'embedded'
              value_handling = 'move'.
to generate the XML i get a dump of type CX_XSLT_SERIALIZATION_ERROR saying "The ABAP data cannot be serialized."
I found a solution to avoid the dump by adding the additional option " TECHNICAL_TYPES = 'ignore' " to the CALL TRANSFORMATION statement, like
CALL TRANSFORMATION id
      SOURCE jsag_data = im_context_b64
      RESULT XML lv_xml
      OPTIONS data_refs = 'embedded'
              value_handling = 'move'
              TECHNICAL_TYPES = 'ignore'.
But, using this addition the dynamic type ref to data part is totally ignored from the XML generation.
If I use a specific DDIC table type to create the data, we do not face this issue and the XML is generated as desired
Does anyone have a solution to this problem as it has become a sort of blockade for our development?
Thanks and Cheers,
Gaurav.

Hello,
I reached same problem with dynamic data references, the only solution I got is to used global DDIC types (also for table types !!) when creating data which needs to be serialized.
The options technical_types = 'ignore' doesn't solve the problem - it just instructs the parser to skip data references without global ddic type. The options value_handling = 'move' is very helpful as XML serialization is very picky about values beeing serialized.
Here is summary of my observations:
- Global DDIC type has to be associated with data reference, otherwise only technical type is there and this is not supported (you can use OPTIONS TECHNICAL_TYPES = u2018IGNOREu2019 but this will just skip the data to be serialized to XML) u2026
- The above means that if you are serializing data reference to table then you have to have also global DDIC type for the table-type !! Unfortunatelly there is no default table type available for transparent tables u2026. They are treated as structures not as table-types u2026 thus:
- CREATE DATA lr_data TYPE <global_ddic_structure> - can be serialized
- CREATE DATA lr_data TYPE STANDARD TABLE OF <global_ddic_structure> - cannot be serialized
- CREATE DATA lr_data TYPE <global_ddic_table_type> - can be serialized
- !! Unfortunatelly !! CREATE DATA lr_data TYPE <type_pool_ddic_structure/ type_pool_table_type> - also cannot be serialized u2013 this is pitty u2026 this should be supported u2026.

RFC Adapter work well as receiver but no data got transferred

I have a JDBC>XI>RFC scenario, I can fetch the data from the ORACLE database side and both the sender and receiver communication channel works well, also when I set an external break point in the RFC module I can dubug it on the ECC side, but
there is no data being transferred to the TABLES parameter, why this happens and how to correct it?
by SXI_MONITOR, I can see message has been flagged as "finished" without any error message, and the payloads from the JDBC adapter is not initial, then i copy the XML file to conduct a mapping test in the ESR, it works fine. But i still can not get any data from the TABLES parameters of the RFC.
I created one action under a different namespace, which will be used to create the process integration scenario, is this might be the cause? but i have assigned the RFC to the action as inbound interface

Hi AR,
Thanks for your reply.
I got the following audit log:
Time Stamp     Type     Description
2010-06-24 05:29:35     Information     Channel ZCC_FLIGHT_SND_01: Executed Query successfully, confirmation skipped - data may be send again ("TEST" mode).
2010-06-24 05:29:35     Information     Send query result, size 47198434 characters.
2010-06-24 05:29:36     Information     MP: entering
2010-06-24 05:29:36     Information     MP: processing local module localejbs/CallSapAdapter
2010-06-24 05:29:36     Information     The application tries to send an XI message asynchronously using connection JDBC_http://sap.com/xi/XI/System.
2010-06-24 05:29:36     Information     Trying to put the message into the send queue.
2010-06-24 05:30:03     Information     Message successfully put into the queue.
2010-06-24 05:30:03     Information     The application sent the message asynchronously using connection JDBC_http://sap.com/xi/XI/System. Returning to application.
2010-06-24 05:30:03     Information     MP: leaving
2010-06-24 05:30:03     Information     The message was successfully retrieved from the send queue.
and the message content:
<ns1:ZPM_FM_006>
<I_PMT001/>
</ns1:ZPM_FM_006>
but when i do the mapping test in the ESR, i got the right result:
<ns1:ZPM_FM_006 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
   <I_PMT001>
      <item>
         <ZPLAN_DEPD>20040807</ZPLAN_DEPD>
         <ZPLAN_DEPT>090700</ZPLAN_DEPT>
      </item>
      <item>
         <ZPLAN_DEPD>20040807</ZPLAN_DEPD>
         <ZPLAN_DEPT>090700</ZPLAN_DEPT>
      </item>
      <item>
         <ZPLAN_DEPD>20040807</ZPLAN_DEPD>
         <ZPLAN_DEPT>090700</ZPLAN_DEPT>
      </item>
   </I_PMT001>
</ns1:ZPM_FM_006>
ZPM_FM_006 is the RFC name and I_PMT001 is the TABLES parameter of the RFC.
Seems the mapping has not been conducted,why can this happen and how to correct it?

Error loading the data into cube

Hi All,
wen i am loading the data in the ASO Cube its giving warning but i did every thing correct yester day it was loaded correctly buttoday its not loading its giving warning ASO application ignore update to derived cells even i clear the data wats this error
so plz can any one help
Reading Rule SQL Information For Database accdb
Reading Rules From Rule Object For Database accdb
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Aggregate storage applications ignore update to derived cells. 29 cells skipped
Data Load Elapsed Time with http://dataldcu.rul : http://0.094 seconds
Database import completed
Output columns prepared: [0]
Thanks
Ram

In ASO cubes you can only load data at level 0 (=leaf level). Every upload to aggregated dimension members are ignored. The warning message "ignore update to derived cells" is meaning that you are trying to load data at node level. As this is not possible with ASO cubes, essbase ignores that data.

Date received time is wrong on Mail and people not getting attachments

Since I moved to this new MacBook Pro with the intel processor from my iMac G5, this latest version of Mail seems to be more problematic than the last:
I can not get the time displayed in the list of emails to be correct. It keeps displaying a time that is 2 hours behind the actual time the email is sent. Meanwhile my system clock is on the right time and I would imagine it is getting it from there.
My other issue is that more now than before, people are telling me they are not getting the Microsoft Word documents that I am sending.
My last issue is about importing mail, For some strange reason when I have imported mail from my other computer to this one as I like to have the messages I have sent saved, Mail skips dates. I have repeated the steps a few times thinking I could resolve the problem and now I have just ended up with duplicated messages.

I can not get the time displayed in the list of emails to be correct.
It keeps displaying a time that is 2 hours behind the actual time the
email is sent. Meanwhile my system clock is on the right time and
I would imagine it is getting it from there.
Have you checked your time zone setting - System Preferences > Date & Time under the Time Zone tab?
If correct, the date and time displayed in the received column in Mail or with any email client is determined by the incoming mail server for the account. Check the long message headers for the received message - the time shown for the first received line.
My other issue is that more now than before, people are telling
me they are not getting the Microsoft Word documents that I am sending.
If included with the sent message in the account's Sent mailbox, anything that happens to an attachment after being successfully sent by any email client is usually a problem with the recipient's incoming mail server.
My last issue is about importing mail, For some strange reason
when I have imported mail from my other computer to this one
as I like to have the messages I have sent saved, Mail skips dates.
I have repeated the steps a few times thinking I could resolve the
problem and now I have just ended up with duplicated messages.
Which OS X and Mail.app version are you running on your other Mac.
Unfortunately, the Mail.app import mailbox process is not the best - especially when importing from Jaguar or Panther Mail to Tiger Mail.

Skip count does not increase when song is skipped on ipod

First, has anyone been able to see a skip added after syncing, since 4.2 came out?
Second, is anyone familiar with what might have changed? Is there a fix I can't find?
Thanks in advance

I've had this same problem ever since iOS 4.2 came out. It's very frustrating as I use Skip Date to keep my commute playlist "fresh"...but ever since November, it seems I'm skipping the same dang songs all the time! Would love for this to get restored...unfortunately, judging by the lack of feedback on threads like this one, it would appear to be a low priority for just about everyone....

Date Axis Stacked Area Charts

Hi,
I'm just evaluating the full version of Crystal Reports 2008 having had some frustrations with the design restrictions in the basic version that ships with Visual Studio 2008. Particularly important to me is the design features for charting data. A lot of the charts I need to build have daily data points and the dates for these data points are represented as labels on the X axis. My problem has been that when you try and build a report with several months or more worth of data points the X axis is getting way too crowded even to the extent of being unreadable with overlapping labels. I've noticed in the full version that there is a date axis chart type whereby you can alter the scale of the X axis e.g. to only show a date at a frequency once per month or greater resulting in the X axis being readable. This seems to work great for line charts etc, however one of the charts I need is a stacked area chart and unfortunately I can find no options / chart types that allow me to scale the dates on the X axis. I've seen there is a date axis chart for area charts, but there is no option of having this chart type as stacked. I know you can also skip data labels in X axis group options, but the max I can skip is 2 and so that doesn't really help me either.
Is there any way of achieving a stacked area chart with a scaled date axis in Crystal Reports 2008? If not it seems to me that the lack of this feature is a real omission from the product. Even Excel charts can handle this type of chart and I would imagine Crystal Reports charts should be more advanced in its charting capabilities.
Any help or recommendations would be appreciated.
Kind Regards,
Mark

I have run in to the same problem. I work for a systems integration company and I purchased this software because I have a lot of crystal reports and .NET experience but I have very minimal crystal chart experience. I need to use the charting to display data over time collections. I need to show all data points collected but for some series that I deal with I need to be able to scale the x-axis labels to something that is legible. There is an aftermarket package(CRReports3.5) for $500 more dollars that would enable me to control this but it seems like alot more money for a small piece of functionality that should already be built in. I have Crystal Reports 2008 and am working with visual studio 2008 can someone please tell me is there ANY WAY to achieve this functionality without purchasing additional software? Otherwise this software purchase was worthless for my current project.
Regards
Dave Bedo

SQL*LOADER에서 원하는 컬럼을 skip하여 load하는 방법

PURPOSE
================================
SQL*LOADER를 통해 data를 load하는 경우, 실제 data가 들어갈 테이블의 구조와 다른 data가 확보되는 경우가 있습니다. 이 경우 data를 다시 확보할 수 있다면 다행이지만, 불행히도 그렇지 못한 경우에는 어떻게 해야할 까요?
예를 들어 다음과 같은 형태의 data가 있는데...
aaa,bbb,ccc,ddd
eee,fff,ggg,hhh
실제로 table에는 2개의 column만이 존재하고, load하기 원하는 data는 다음과 같을 경우... 적용가능한 몇 가지 방법을 살펴보려 합니다.
bbb,ddd
fff,hhh
(아래 test는 10.2 에서 진행되었습니다.)
EXPLANATION
================================
1. DATA with Fixed-Length
data 내의 항목이 모두 fixed-length라면, POSITION을 사용하여 간단히 처리할 수 있습니다.
# target table
create table test (col1 varchar2(10),col2 varchar2(10))
# data
aaa,bbb,ccc,ddd
eee,fff,ggg,hhh
# control file
load data
infile test.dat
into table test
(col1 position(5:7) char,
col2 (13:15) char)
다음과 같은 결과를 확인할 수 있습니다.
SQL> select * from test;
COL1 COL2
bbb ddd
fff hhh
2. DATA with Variable-Length
그러나 data 내의 항목에 variable-length 항목이 있다면, POSITION을 사용할 수 없습니다.
따라서 다음과 같은 회피책을 고려해볼 수 있습니다.
(1) 일단 LOAD 완료 후, 필요 없는 COLOMN을 DROP합니다.
(2) 일단 LOAD 완료 후, CREATE TABLE ~ AS SELECT 를 통해 원하는 TABLE을 재생성합니다.
그런데 이런 형태의 작업은 부가적인 작업시간을 필요로 합니다.
[대안] 다음과 같이 SKIP할 data에 대해 FILLER를 사용하되, COLUMN NAME은 '존재하지 않는' 것으로 사용합니다.
# target table
create table test (col1 varchar2(10),col2 varchar2(10))
# data
aaaaa,bbbbbb,cccc,dddd
eee,ffffffffff,gggggg,hhh
# control file
load data
infile test.dat
into table test
fields terminated by ","
(col99 filler char, <--- 존재하지 않는 이름
col1 char,
col88 filler char, <--- 존재하지 않는 이름
col2 char)
다음과 같은 결과를 확인할 수 있습니다.
SQL> select * from test;
COL1 COL2
bbbbbb dddd
ffffffffff hhh

Skip Date

Similar Messages

Maybe you are looking for