Navigate with "simple" links
Hi! I want to navigate between my pages by using the navigation rules. The situation is the following. I have got the starting page index.jsp and the second page opening.jsp.
I want to have a link in the index.jsp to the opening.jsp, so i put the following construct into my index.jsp
<f:use_faces>
<h:form formName="menu">
<h1>GLM - Lince remix interface</h1>
<h2><h:command_hyperlink commandName="openremix" action="openremix" label="Open a new remix" /></h2>
</h:form>
</f:use_faces>
In the faces-config.xml file i put
<navigation-rule>
<navigation-case>
<from-outcome>x</from-outcome>
<to-tree-id>/glm/opening.jsp</to-tree-id>
</navigation-case>
</navigation-rule>
but it doesn't work! What's wrong about my code? Are there any simplier solutions?
kind regards, Ingo
Hi Ingo,
You should start by downloading the last JSF release.
Your code seems pretty old.
Then, your <from-outcome> shoud be like
<from-outcome>openremix</from-outcome>
since you've set action="openremix" to the commandLink.
Frederic
Similar Messages
-
Storing of HR documents with archive link in DMS?
hi experts,
how to store HR documents with archive link in DMS?
i found somewhere it is possible with tr. code OAWD,OAAD
is helpful..or is there any other way for storing HR documents
becz i am not able to do it..
if any one guide me it will be very helpful to me.
thx..pts will be awarded be sure..hi sam ra,
SAP ArchiveLink - Scenarios in
Applications (BC-SRV-ARL)
SAP ArchiveLink® is one of the SAP Basis cross-application communication interfaces between
the SAP System and external components. External components may be general desktop
applications or external storage systems. The integration of SAP ArchiveLink in the various SAP
applications enables the storage scenarios explained in this cross-application documentation.
The documentation is structured as follows:
An Introductory Section (Seite 10) containing general information about storing using SAP
ArchiveLink and about the following documentation
An application-specific section for each SAP application component (for example, FI, SD,
HR) with the relevant storage scenarios
For information on related areas, see the following documentation:
SAP ArchiveLink (Extern)
SAP Business Workflow (Extern)
Archiving and Deleting Application Data (Extern)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
SAP ArchiveLink - Introduction
April 2001 9
SAP ArchiveLink - Introduction
The following sections contain general information about this scenarios documentation.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
SAP ArchiveLink and Application Scenarios
10 April 2001
SAP ArchiveLink and Application Scenarios
SAP ArchiveLink® is one of the integrated interfaces in the SAP Basis System that can be used
to store all kinds of documents in external content servers.
SAP ArchiveLink therefore complements the existing range of SAP application software. For a
detailed description of SAP ArchiveLink, see Introduction to SAP ArchiveLink (Extern).
The SAP application components, for example, SD, FI, HR and MM, support storing using SAP
ArchiveLink by providing various application scenarios. Inbound documents, outbound
documents, print lists, archive files, desktop files and binary files are supported.
How the inbound documents are entered in the system and forwarded for processing and storing
depends on the storage scenario used. For information about the possible Storage Strategies
(Extern) , see the documentation SAP ArchiveLink (Extern).
This documentation describes the storage scenarios that are integrated in the SAP applications,
for example, how Sales and Distribution (SD) documents can be stored in external storage
systems using SAP ArchiveLink.
Archiving in databases using the ADK (Archive Development Kit) is not the same as
storing using SAP ArchiveLink.
For informationen about data archiving using the ADK archiving transaction, see the
documentation Archiving and Deleting Application Data (Extern).
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
SAP ArchiveLink: Overview
April 2001 11
SAP ArchiveLink: Overview
Background
There is a growing trend nowadays to transfer stored data from paper/microfiche to external
content servers (for example, archives). Companies are obliged by law and/or internal
standards to keep documents for a certain length of time. Traditionally, paper archives or
microfilms have been used, but these methods are very expensive, either due to copying costs or
the large amount of space required by such archives. By contrast, electronic storing methods are
a much cheaper option and represent an important part of the paperless office concept.
SAPs R/3 System supports a variety of business processes, which can involve documents both
in paper form and in electronic form. The documents either serve to trigger all kinds of processing
steps in FI, SD, HR and so on, or they are documents relating to processes in one of these
application areas.
When linked to SAP applications, content servers and the SAP ArchiveLink interface allow
flexible access to all document searches available in the SAP System and can therefore lead to
considerable time savings. In addition, a combination of the SAP System and SAP ArchiveLink
allows users multiple access (parallel and direct) to stored documents from their work center
without the need for time-consuming searches, which guarantees faster access to documents.
The subsequent sections of this documentation describe the integration of SAP ArchiveLink in
the functions of various application components within the SAP System.
Concept
SAP ArchiveLink provides the following interfaces:
User interface
Application Interface
This interface consists of function modules, which must be integrated in the SAP
applications, if SAP ArchiveLink functions are to be used.
Business objects are linked to stored documents and object methods are available that
allow storing using SAP ArchiveLink to be integrated flexibly in SAP Business Workflow.
Interface between SAP and external components and general desktop applications
External components may be HTTP content servers, for example. General desktop
applications may be MS Word and MS Excel, for example.
Positioning SAP ArchiveLink
SAP ArchiveLink enables
Incoming documents to be stored in the SAP System
Information from the SAP System (for example, outgoing documents and print lists) to be
stored
Direct access from SAP application components to stored documents
Integration of external content servers with the SAP System
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
SAP ArchiveLink: Overview
The SAP ArchiveLink-specific Terms (Extern) document, technical document class, document
type, object type and synchronous storing and asynchronous storing are explained in the
SAP ArchiveLink documentation, which also contains information on the Administration Concept
(Extern) (content servers, links and link tables).
Technical Basis
Links from documents to business objects are created by the generation of a link table entry,
which contains both a unique identification for each business object using the object type and
object key and a reference to a stored document using the content server ID and a unique key for
each document stored in this content server. It is therefore possible to create a link between a
business object and any number of documents using a simple 1:n relationship in a table. No
entry is required in the application tables in which the business objects are managed. If the link
table entry for an stored document is deleted, all references in the SAP System to this stored
document are also deleted. This technique allows the options for accessing stored documents to
be integrated flexibly into the SAP System.
Application Interface
The interface to the SAP applications contains the following functions:
Linking business objects with stored documents
This function is used to display, retrieve or store stored documents directly from the
business object. An example of this is the link between an F1 business object invoice
and original invoices that have been scanned into the system.
Linking business objects with stored outgoing documents
This function is used to store documents generated using SAPscript and link them with
the relevant business objects. Examples of documents are outbound quotations, order
confirmations, purchase orders and invoices.
Storing print lists
The process for storing print lists is the same as for outgoing documents.
As of R/3 Release 4.6C, application objects archived in data archiving (ADK) are not
stored using SAP ArchiveLink, but rather using the Content Management Service
(Extern) of the SAP Knowledge Provider (Extern) (KPro).
Integration Status
Many applications in the SAP System are linked directly or indirectly with SAP ArchiveLink:
Direct link
FI
MM
SD
Indirect link
Via the DMS (document management system): MM, PP,...
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
SAP ArchiveLink: Overview
April 2001 13
SAP ArchiveLink is centrally integrated in the DMS and all applications with object
links to the DMS are therefore linked to SAP ArchiveLink.
Via MC (Message Control): MM, SD,...
The integration of SAP ArchiveLink in message control allows outgoing documents to
be stored.
Via SAPconnect and the Business Workplace: Faxes
Inbound faxes can be processed directly in the Business Workplace, stored and
linked with business objects without having to be printed first.
Generic Object Services
For R/3 Release 4.0A, generic object services are provided for four SAP ArchiveLink
functions via the system menu for all SAP applications.
From the business objects implemented in the SAP applications, four SAP ArchiveLink functions
can be executed in all applications and independently of which application is involved:
You can display the hit list of stored documents
You can assign stored documents subsequently to a business object.
You can store documents in dialog
You can create a bar code for a business object
These functions are integrated into all SAP applications via object services. There is no need for
special function modules to be integrated in the applications. For more information, see Generic
Object Services (Extern).
For these functions to work smoothly, object orientation in the SAP application and
support of object services are important.
For more information, see Business Context Facilities and Generic Object
Relationships (Extern).
Business Applications
MM
The following documents relating to purchasing in MM can be stored:
Outgoing purchasing documents
Requests for quotation
Purchase orders
Scheduling agreements
Forecast delivery schedules
Contracts
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
SAP ArchiveLink: Overview
14 April 2001
Incoming purchasing documents
Quotations
Order confirmations
Incoming invoices and credit memos
Incoming delivery notes
Print lists
For more information about storing in MM, see SAP ArchiveLink - Storage Scenarios in MM
(Seite 74).
SD/WS
The following are examples of sales documents that can be stored:
Incoming customer inquiries and customer inquiry changes
Outgoing customer quotations
Incoming purchase orders and purchase order changes
Outgoing order confirmations
For more information about storing in SD, see SAP ArchiveLink - Storage Scenarios in SD [Seite
50].
PA
The following personnel administration and payroll documents can be stored:
Incoming HR master data documents
Incoming recruitment documents
Incoming travel management documents
For more information about storing in PA, see SAP ArchiveLink - Storage Scenarios in PA [Seite
204].
QM
The following QM documents can be stored:
Incoming documents for quality notifications (for example, customer complaints)
Outgoing documents for quality notifications (for example, letter of complaint to vendor)
Outgoing quality certificates
For more information about storing in QM, see SAP ArchiveLink - Storage Scenarios in QM
(Seite 93).
The DMS and Applications Connected with the DMS
In the DMS and in applications that are connected with the DMS (often MM and PP), the
following documents can be stored:
Incoming documents
Originals managed in the DMS (PC files)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
SAP ArchiveLink: Overview
April 2001 15
For more information about storing in the DMS, see Storing in Document Management (CADMS)
(Seite 24).
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Customizing
16 April 2001
Customizing
Customizing is divided into three areas:
General Customizing for SAP ArchiveLink
Customizing for SAP Business Workflow
Application-specific Customizing for individual SAP ArchiveLink scenarios
General Customizing for SAP ArchiveLink
To make these settings, proceed as follows:
Use the Implementation Guide (IMG):
Basis Basis Services SAP ArchiveLink
For further information, see the Customizing (Extern) section in the documentation SAP
ArchiveLink.
Customizing for SAP Business Workflow
For the storage scenarios that use SAP Business Workflow:
Storing for Subsequent Entry (Extern)
Storing for Subsequent Assignment (Extern)
Storing and Entering (Extern)
Storing and Assigning (Extern)
you must make Workflow Customizing settings.
For further information, see the section Specific Customizing (Extern) in the documentation SAP
ArchiveLink and the IMG (Basis Basis Services SAP ArchiveLink).
Application-Specific Customizing
In the individual application scenarios, further customizing settings are required. The
application-specific customizing for each SAP application component is described in the following
sections of this documentation.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Aim of this Documentation
April 2001 17
Aim of this Documentation
This documentation describes the SAP ArchiveLink scenarios that are delivered as part of the
standard system by SAP. There is a section for each storage scenario. The documentation
describes the standard software.
Each storage scenario description is assigned to one of the big application components in the
SAP System. Storage scenarios in the following application components are currently described:
BC (Basis)
CA (Cross-Application Components)
FI (Financial Accounting)
SD (Sales and Distribution)
MM (Materials Management)
IS-RE (Real Estate Management)
QM (Quality Management)
PP (Production Planning and Control)
PM (Plant Maintenance and Service Management)
PA (Human Resource Management)
PY-DE (Payroll Germany)
The individual storage scenarios are structured as function descriptions and generally contain the
following sections:
Section Description
Use Business background
(this section is sometimes separate from the pure function description).
You learn which application scenarios SAP ArchiveLink supports, which
employees are involved and the advantages and simplifications offered by SAP
ArchiveLink.
This information is enough to give you a first overview of the storage scenarios.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Aim of this Documentation
18 April 2001
Prerequisites Technical implementation
You become familiar with the document types and the corresponding technical
document classes that form the basis of the scenario. You discover which object
types and link tables are used.
This information is particularly useful if you are planning to enhance or change
the scenario.
Preparation and Customizing
The settings that are necessary to adapt the scenario to the specific
requirements of your corporate structure are described.
The settings described are scenario-specific and usually complement the SAP
application component Customizing.
Activities This section describes the technical and business connection of the scenario to
the R/3 application and how the corresponding application functions are called.
This documentation is not intended to replace the SAP ArchiveLink
documentation and should only be seen as a central reference point for
documentation relating to the implementation of SAP ArchiveLink in the individual
SAP applications.
To find out more about using SAP ArchiveLink and make full use of the functions for
enhancements and in-house developments, see the SAP ArchiveLink (Extern)
documentation.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
SAP ArchiveLink - Storage Scenarios (BC)
April 2001 19
SAP ArchiveLink - Storage Scenarios (BC)
Ablegen von Listen mit SAP ArchiveLink (Extern)
The following sections describe storage scenarios in R/3 Basis (BC):
Storing Lists in the Report Tree
Storing Print Lists
Storing SAPoffice Documents
See also:
General Introduction (Seite 10) to this scenario documentation
SAP ArchiveLink (Extern) documentation
General Report Selection (Extern) documentation
BC - ABAP Programming (Extern) documentation
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Storing Lists in the Report Tree (BC)
20 April 2001
Storing Lists in the Report Tree (BC)
Use
This section describes the storing of lists generated by executing reports in report trees. The
process is not application-specific and is usually possible for any list unless storing is specifically
prohibited in the program.
Users can access reports that they require in the hierarchical structure of the report tree easily
from all applications, via general report selection in the SAP information system.
The SAP standard report tree contains several standard reports for all applications. To access
reports from a particular application, you must expand the structure until you reach a list of
reports on the lowest level. Here you select and execute the required report. You can display the
result on the screen or print it via the spool system.
Companies can configure the standard report tree to suit their requirements. For example, you
can add your own reports or pre-generated lists and even change the entire structure.
Prerequisites
Technical Implementation (BC)
Object type
SREPOTREE
Document type
ABAP
Link table
TOA01
For further information on executing reports and displaying pre-generated lists in report trees,
see General Report Selection (Extern).
Technical Implementation (BC)
Although storing lists generated in the report tree is similar for all applications, the report tree
available to you may vary from the SAP standard, since your company can adjust the SAP
standard report tree to suit its requirements.
For further information on Customizing the report tree, see the Implementation Guide (IMG).
Choose
Tools Business Engineer Customizing
Implementation projects Display SAP Reference IMG
and then Basis Reporting - Report tree.
Activities
Storing lists
When you have executed a report in the report tree, you can save the result list there and store it
simultaneously.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Lists in the Report Tree (BC)
April 2001 21
To save your list and store at the same time:
1. Choose System List Save Report tree.
2. Select Store in the dialog box displayed and specify where the list should be stored in the
report tree. Specify the values for Report tree and Nodes.
3. Choose Save.
You have now saved your list in the report tree and the process is complete.
Displaying information on storing lists
You can check whether a list has been stored in the report tree:
To check whether a list has been stored:
1. Position the cursor on the relevant list.
2. Choose Utilities List information.
The System displays a dialog box. The check boxes indicate whether the list has been
stored.
Displaying stored lists
To display a stored list in the report tree, choose the relevant list by double-clicking.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Storing Business Workplace Documents
22 April 2001
Storing Business Workplace Documents
Use
Documents stored in the Business Workplace (Extern) are usually stored in the R/3 database (PC
documents and binary documents can also be stored in an HTTP content server). To save
memory space in the database, you can store documents in an external storage system using
SAP ArchiveLink. The content of the documents that you have stored using SAP ArchiveLink is
then deleted from the database.
You can only retrieve Workplace documents stored using SAP ArchiveLink from the
external storage system, from within the R/3 System. Direct access within the
storage system is not possible.
Prerequisites
Technical Implementation
Object type
SOFM
Link table
TOA01
Document class
BIN
Document type
SOAARCHIVE Description: Office data object
Preparation and Customizing
To store documents from the Business Workplace, a content server must be maintained for the
object type SOFM and the object class SOAARCHIVE in Customizing (Extern) for SAP
ArchiveLink.
To perform mass archiving of Workplace documents, you need authorization (Extern) for
Workplace administration. This authorization is contained in the role SAP_BPT_USER.
Activities
Proceed as described in Mass Archiving (Extern).
The procedure for displaying and changing documents stored in the archive is no different for the
user than the procedure for documents stored in the R/3 database. Calling documents from the
archive usually takes longer, however.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
SAP ArchiveLink - Storage Scenarios (CA)
April 2001 23
SAP ArchiveLink - Storage Scenarios (CA)
The following sections describe the storage scenarios in the R/3 application component CA
(Cross-Application):
Document Management System (CA-DMS)
Data Achiving (CA-ARC)
See also:
General Introduction (Seite 10) to the scenario documentation
SAP ArchiveLink (Extern)
Application Data Archiving (Extern)
Document Management System (Extern)
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Optical Archiving in Document Management (CA-DMS)
24 April 2001
Optical Archiving in Document Management (CA-DMS)
eingehende Dokumente (Seite 30)
You can use SAP ArchiveLink® to archive documents from the document management system
(DMS) in optical archiving systems.
Documents Input when Processed (CA-DMS) (Seite 30)
Checking a Document into an Archive (CA-DMS) (Seite 31)
Displaying an Archived Document (CA-DMS) (Seite 32)
Copying an Archived Document to a Document Info Record (CA-DMS) (Seite 33)
Digital Original Application Files (CA-DMS) (Seite 25)
Archiving an Original Application File (CA-DMS) (Seite 26)
Creating a New Version (CA-DMS) (Seite 27)
Changing an Original Application File for an Existing Version (CA-DMS) (Seite 28)
Displaying an Archived Original Application File (CA-DMS) (Seite 29)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Digital Original Application Files (CA-DMS)
April 2001 25
Digital Original Application Files (CA-DMS)
For each document info record, you can maintain and archive two original application files.
Each original application file can be linked to a maximum of 99 additional files. These are
archived automatically when you archive the original application file.
Functions
You process original application files with the following menu option of the document info record:
Extras Originals File 1(2)
The following functions for archiving and processing archived original application files are
available:
Archiving an Original Application File (CA-DMS) (Seite 26)
Creating a New Version (CA-DMS) (Seite 27)
Changing an Original Application File for an Existing Version (CA-DMS) (Seite 28)
Displaying an Archived Original Application File (CA-DMS) (Seite 29)
Notes on archiving original application files
The system checks the application that is used to process the original application file (for
example, WinWord 7.0).
In the IMG for the Document Management System in the activity Define workstation
applications, you define the archives for the various applications (for example, archive A2
for the application WinWord 7.0).
The system does not log the archiving of original application files. However, in the IMG for
the Document Management System, you can define in the activity Define document types
that all field changes are to be logged (Indicator: Create change documents).
If you have archived an original application file with the function Check in archive, you
can track any changes to the storage data (fields Data carrier and Original) in the change
documents.
Notes on processing archived original application files
You have two options for processing an archived original application file:
Creating a New Version (CA-DMS) (Seite 27)
Changing an Original Application File for an Existing Version (CA-DMS) (Seite 28)
See also:
Figure: Changing an Archived Original Application File (Extern)
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Archiving an Original Application File (CA-DMS)
26 April 2001
Archiving an Original Application File (CA-DMS)
You archive an original application file if you want to save the current processing status for
documentation purposes.
See also:
Figure: Archiving Original Application Files (Extern)
To archive an original application file:
1. Process the document in change mode (Basic data screen).
2. Choose Extras Originals File 1(2) Check in archive.
The system saves the original application file to the optical disk defined in Customizing.
You see a dialog box with the following message:
Document archived successfully
3. You can check which archive the document was saved to.
To do this, display the data carrier and path for the original application data by choosing
Storage data.
The data carrier and the path where the original application file was stored before being
checked in the archive is no longer displayed. The system has overwritten this data with
the archive data.
If the document type is defined such that all field changes are logged, you can still
display the previous storage place (Goto Display changes).
4. Save your document info record.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Creating a New Version (CA-DMS)
April 2001 27
Creating a New Version (CA-DMS)
This means that you keep the old version (for example, 00) containing the archived original
application file and create a new version (for example, 01) directly from the old version. For the
new version, you then change the original application file.
To process the archived original application file (new version):
1. On the Basic data screen, choose Document New version.
The system copies the data of the existing version (for example, 00), including the archived
original application data.
2. In the new version (for example, 01), the original application file is still archived.
3. Choose Extras File 1(2) Change.
The system automatically creates a copy of the checked in original application file.
Enter the target for the copy. This path identifies the place where the original
application file for the new version (for example, 01) is stored.
If the system accepts your entries, you see a dialog box with the following message:
Data copied from archive
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Changing an Original Application File for an Existing Version (CA-DMS)
28 April 2001
Changing an Original Application File for an Existing
Version (CA-DMS)
This means that you change the version whose original application file has been archived. There
is only one version in this case.
You can display the processing status that the original application file had in the archive from the
status log if the following applies:
When checking the original application file into the archive, you set a status for which the
Indicator: Audit function is selected. This indicator causes original application files that are
checked into the SAP database, a vault, or an archive with this status to be stored automatically.
To change the archived original application file (existing version):
1. Choose Extras Originals File 1(2) Change.
The system automatically creates a copy of the archived original application file.
2. You see a dialog box, where you can enter the target for the copy. As a default value, you
see the path where the file was stored before being archived.
To accept the default value, choose Continue.
If you want the file to be copied elsewhere, enter the required data (data carrier,
path, and file name) in the dialog box. This path identifies the place where the
original application file for the same version is stored. The system overwrites the
previous archive data.
If the system accepts your entries, you see a dialog box with the following message:
Data copied from archive
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Displaying an Archived Original Application File (CA-DMS)
April 2001 29
Displaying an Archived Original Application File (CADMS)
To display an original application file, you always use the following function, whether the data is
stored on a server or in an archive:
Extras Originals File 1 (2) Display.
The system automatically determines the path in the computer network. If the original application
file is stored in an archive, you see a dialog box with the following message:
Data copied from archive
You can display archived data only from computers that have SAP ArchiveLink
software installed.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Documents Input when Processed (CA-DMS)
30 April 2001
Documents Input when Processed (CA-DMS)
You process documents input when processed in the Archive menu of the document info record.
The following functions are available:
Checking a Document into an Archive (CA-DMS) (Seite 31)
Displaying an Archived Document (CA-DMS) (Seite 32)
Copying an Archived Document to a Document Info Record (CA-DMS) (Seite 33)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Checking a Document into an Archive (CA-DMS)
April 2001 31
Checking a Document into an Archive (CA-DMS)
You use this function to check a scanned-in document (image) into an optical archive.
See also:
Scenario: Checking a Document into an Archive (Extern)
To check a document into an archive:
1. Two windows are active on your computer screen:
a scan window with a scanned-in document
a window for the R/3 document management system
2. In the document management window, choose the function you require (Document
Create or Change).
Enter the required data on the initial screen and choose ENTER. You see the Basic data
screen.
3. Choose Archive Check into archive.
The system checks whether a status network that supports a status of status type A
(archived) is defined for the chosen document type.
Archiving is possible in the following cases:
if the status network does not support a status of status type A
if the status network supports a status of status type A at the current processing
stage.
The system automatically sets the status of status type A and records the status
change in the status log.
The system automatically determines the archive that is defined in the IMG
functionOptical Archive.
When the data has been archived, you see a dialog box with the following message:
Document archived successfully
4. Save your document info record.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Displaying an Archived Document (CA-DMS)
32 April 2001
Displaying an Archived Document (CA-DMS)
You use this function you to display documents that were either scanned in when processed,
then archived, or copied from the archive from the document info record.
This function is only active it at least one document has been archived for the chosen
document info record.
To display a document from the archive:
1. Choose menu option Archive Display from archive.
2. What you do next depends on the situation:
If only one archived document exists for the document info record, the system goes
directly to the display program (viewer) and displays the document.
If more than one archived documents exist for the document info record, you first
see a dialog box listing the archived objects with the date on which they were
archived.
On the list, select the archived objects you want to display in the viewer.
Choose the Choose pushbutton.
The system goes to the first selected object.
In the viewer, you can switch between the objects you selected by choosing the
appropriate function (Object + or Object -) from the Goto menu.
3. To exit the display function for archived objects, close the viewer with Document Exit.
You can now continue processing the document info record.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Copying an Archived Document to a Document Info Record (CA-DMS)
April 2001 33
Copying an Archived Document to a Document Info
Record (CA-DMS)
This function allows you to copy a document that has been archived by another application (for
example, SAPoffice) to a document info record.
See also:
Scenario: Copying an Archived Document to a Document Info Record (Extern)
Figure: Copying an Archived Document to a Document Info Record (Extern)
To copy a document from an archive:
1. Two windows are active on your screen:
a window showing the document in the display program (viewer) of the archive
a window for the R/3 document management system
2. In the document management window, choose the function you require (Document
Create or Change).
3. Place the cursor on the viewer window again.
Choose Edit Select
This selects the scanned-in document for processing in the document management
system.
4. Place the cursor on the document management window.
Choose Archive Copy from archive.
The system makes the same status checks as described in Checking a Document into
an Archive (CA-DMS) (Seite 31).
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
SAP ArchiveLink and Application Data Archiving (CA-ARC)
34 April 2001
SAP ArchiveLink and Application Data Archiving (CAARC)
Use
You can use the Archive Development Kit data archiving transaction and SAP ArchiveLink to
store archive files in external archives. For more information see: Technical Background (CAARC)
(Extern).
Prerequisites
You must enter the following settings in customizing in order to use the SAP ArchiveLink
interface to archive application data:
Platform-independent filename
Document type
Automatic transfer of archive files
Activities
Checking Storage Status of Archive Files (CA-ARC) (Seite 38)
Storing Archive Files Manually (CA-ARC) (Seite 39)
See also:
Setting Platform-independent Filenames for SAP ArchiveLink (CA-ARC) (Seite 35)
Setting Archive File Document Type (CA-ARC) (Seite 36)
Storing Archive Files Automatically (CA-ARC) (Seite 37)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Setting Platform-independent Filenames (CA-ARC)
April 2001 35
Setting Platform-independent Filenames (CA-ARC)
1. Call the Archive Management.
2. Enter the name of the archiving object and press Enter.
3. Choose the Customizing function.
4. In archiving object-specific customizing choose Technical Settings.
5. In the logical filename field enter a filename that refers to the exchange directory of the
attached SAP ArchiveLink archive system. For example, the logical filename
ARCHIVE_DATA_FILE_WITH_ARCHIVE_LINK. The system delivers the following standard
defined filename:
, if you use this runtime variable in the specification of the
physical path. For example, the physical path could be:
ARCHIVE_GLOBAL_PATH_WITH_ARCHIVE_LINK. See the FILE transaction
documentation for further information.
See also:
Setting Archive File Document Type (CA-ARC) (Seite 36)
Storing Completed Archive Files in the Archive System Automatically (CA-ARC) (Seite 37)
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Setting Archive File Document Type (CA-ARC)
36 April 2001
Setting Archive File Document Type (CA-ARC)
1. Call the Archive Management.
2. Enter the name of the archiving object and press Enter.
3. Choose the Customizing function.
4. Choose Technical Settings in archiving object-specific customizing.
5. Choose the document type Archive in the group box Archive System Link.
See also:
Setting Platform-independent Filenames for SAP ArchiveLink (CA-ARC) (Seite 35)
Storing Completed Archive Files in the Archive System Automatically (CA-ARC) (Seite 37)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Completed Archive Files in the Archive System Automatically (CA-ARC)
April 2001 37
Storing Completed Archive Files in the Archive System
Automatically (CA-ARC)
1. Call the Archive Management.
2. Enter the name of the archiving object and press Enter.
3. Choose the Customizing function.
4. Choose Technical Settings in archiving object-specific customizing.
5. Mark the checkbox Exec. automat. in the group box Archive System Link.
See also:
Setting Platform-independent Filenames (CA-ARC) (Seite 35)
Setting Archive File Document Type (CA-ARC) (Seite 36)
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Determining Whether an Archive File is Stored in the Optical Archive (CA-ARC)
38 April 2001
Determining Whether an Archive File is Stored in the
Optical Archive (CA-ARC)
1. Call the Archive Management.
2. Enter the name of the archiving object and press Enter.
3. Choose the Management function.
4. Set the cursor on the file whose archive residence you want to know, and double-click.
The Archive Management: Archiving File Detail popup appears. Read the Storage option
status text.
See also:
Storing Completed Archive Files in the Archive System Manually (CA-ARC) (Seite 39)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Completed Archive Files in the Archive System Manually (CA-ARC)
April 2001 39
Storing Completed Archive Files in the Archive System
Manually (CA-ARC)
Only archive files whose data objects have been deleted in the database can be
stored in an external archive system.
1. Call the Archive Management.
2. Enter the name of the archiving object and press Enter.
3. Choose the Management function.
4. Set the cursor on the file which you want to store in the external archive system.
If you want to store all the files in a session, set the cursor on the session number.
5. Choose the Store function.
The Archive Management: Store via ArchiveLink popup appears.
6. Choose the Store Files function.
The file is passed to the external archive system.
See also:
Determining Whether an Archive File is Stored in the External Archive (CA-ARC) (Seite 38)
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
SAP ArchiveLink - Storage Scenarios (FI)
40 April 2001
SAP ArchiveLink - Storage Scenarios (FI)
The following sections describe storage scenarios in the Financial Accounting (FI) application
component.
See also
The general introduction (Seite 10) to this scenario documentation
SAP ArchiveLink (Extern)dokumentation
Financial Accounting documentation
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Print Lists (FI)
April 2001 41
Storing Print Lists (FI)
Use
In the FI application component, you can use SAP ArchiveLink to transfer the following print
lists to an external storage system:
Compact document journal (RFBELJ00)
Line item journal (RFEPOJ00)
Open item account balance audit trail (RFKKBU00)
Accumulated account balance audit trail (RFKLBU10)
Storage using SAP ArchiveLink has the following advantages:
Reduced burden on online system
Safer storage
Faster, easier access
Prerequisites
Technical Realization (FI)
Following improvements to the print reports, the print lists are now provided with an index when
they are stored, enabling you to access objects (including sub-objects) at a later date.
A particular account in the account balance audit trail.
The system also generates a link to any stored documents that might exist, enabling you to
display the corresponding stored document from the stored print list.
For a detailed description of how to store print lists, refer to Print Lists (Extern) in the SAP
ArchiveLink documentation.
There are no plans for enhancements.
Preparation and Customizing (FI)
No special Customizing settings are required to be able to store print lists in FI. For
information on the Customizing settings for SAP ArchiveLink, see Customizing (Seite 16).
Special authorizations are not required.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Storing Print Lists (FI)
42 April 2001
Activities
For notes on using these functions (in particular displaying stored print lists) see
Searching for, Displaying and Printing Print Lists (Extern) in the SAP ArchiveLink
documentation.
To store print lists in the FI application component, proceed as follows:
1. Run the appropriate program and enter your selection criteria.
2. On the selection screen, choose Optical archiving and enter the following information in
the dialog box that is now displayed:
Object class: DRAW (document)
Object type: D01 (print list)
Identification: XXX (three figure alphanumeric code of your choice)
Text: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (up to 30 characters
long).
3. Now choose Execute in background or Execute + Print.
To view the stored list, from the R/3 System initial screen, choose
Office Business Documents Find lists. Enter the name of the report program and
any additional selection criteria. Choose Enter. From the list that is now displayed you
can select a print list and display its contents.
When displaying the list, you can also display the incoming and outgoing documents
(provided these were also stored). You do this via hyperlinks which are recognizable
as such by being underlined.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Incoming Documents (FI)
April 2001 43
Storing Incoming Documents (FI)
Use
In the FI application component, you can transfer incoming documents (invoices, credit memos)
to an external archive system using SAP ArchiveLink. Data can be stored in different ways:
Store for subsequent entry
Store and enter, and
Late storing with bar codes
Assign, then store
For detailed information on the ways in which you can store documents, see Storage
Strategies (Extern) in the SAP ArchiveLink documentation.
The procedure Store for entry later with document parking is different to other storage
methods. Under this procedure, processing is even more automated than it would otherwise be.
The accounting clerk responsible for parking documents receives an incoming document (an
invoice for example) via SAP Business Workflow. In the entry transaction to which the invoice
is subject, the clerk can park this document using the existing incoming document. He or she can
then send the parked invoice together with the incoming document for further processing
(approval or additional investigation) to the relevant colleague. This colleague can then complete
processing and post the invoice.
Prerequisites
Technical Realization (FI)
Object type
BKPF (financial accounting document)
Link table
TOA01
Document class
FAX
Document type
In the standard system, the following document types are supplied for the R/3 FI application
component.
FI document Document type
Incoming invoice without invoice verification FIIINVOICE
Incoming credit memos without invoice verification FICREDIT
Incoming invoice parking FIIINVPREL
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Storing Incoming Documents (FI)
44 April 2001
Fast invoice entry FIIPAYMEN2
Incoming payment FIIPAYMENT
Enhancements
You can define your own document types under
Tools Business Documents
Document types Global document types and
Tools Business Documents
Document types WFL document types.
You can define your own transaction links under
Tools Business Documents
Document types Workflow parameters.
Further information
For basic technical information on adding SAP ArchiveLink functions to the R/3 application
components, refer to the section Incoming Documents (Extern) in the SAP ArchiveLink
documentation.
Preparation and Customizing (FI)
The basic preliminary settings that you must make in SAP ArchiveLink are described in
Customizing (Seite 16)
You need to make settings in Customizing for Financial Accounting only for the activity Late
storing with bar codes. For more information, see the documentation for the activities Specify
Control Parameters for Bar Code Entry and Maintain Document Types for Bar Code Entry
located in Customizing for Financial Accounting under Financial Accounting Global Settings
Document Document Header.
Activities
Scenario: Assignment and Storage in FI
For information on this procedure, see the following sections of the SAP ArchiveLink
documentation:
Scenario: Late Storage with Bar Codes in FI
For information on this topic, see:
Process: Late Storing with Bar Codes (Extern)
Concept: Storing with Bar Codes (Extern)
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Incoming Documents (FI)
April 2001 45
Scenario: Store for Subsequent Entry in FI
For information on this topic, see:
Concept: Store for Subsequent Entry (Extern)
Process: Store for Subsequent Entry (Extern)
Store for Subsequent Entry (Extern)
Scenario: Entry and Storage in FI
For information on this topic, see:
Concept: Store and Enter (Extern)
Process: Store and Enter (Extern)
Store and Enter (Extern)
Document Processing Functions
In certain document processing transactions in FI you have direct access to the functions
available under SAP ArchiveLink. These transactions include:
Changing documents (FB02)
Displaying documents (FB03)
Changing parked documents (FBV2)
Displaying parked documents (FBV3)
When carrying out these transactions, you can use the following functions:
Subsequently assign a stored document from the external content server (see Assign
Stored Documents Subsequently (Extern))
Display the stored document for an FI document from the external content server (see
Searching for Incoming Documents (Extern))
The assignment and display functions might typically be accessed as follows:
1. From the General Ledger menu, choose Document Display.
2. Enter the document number and the company code in which it was posted. Choose
ENTER.
The system now displays the R/3 document.
3. To display the stored document for this R/3 document, choose Environment Object
links
To assign this document to a document already stored, choose Environment Assign
original.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Storing Incoming Documents (FI)
46 April 2001
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Outgoing Documents (FI)
April 2001 47
Storing Outgoing Documents (FI)
Use
You can store documents transferred from the General Ledger (FI-GL), Accounts Receivable (FIAR)
and Accounts Payable (FI-AP) application components using SAP ArchiveLink. Documents
that you created using SAPscript are stored in an external storage system and linked to the
documents or accounts from which they are derived. You can store the following outgoing
financial accounting documents:
Payment advice notes
Checks
Correspondence like payment notifications and bank statements
Dunning notices
Storage using SAP ArchiveLink takes place using Business Transaction Events, to which end
SAP supplies sample function modules that you can activate by making the appropriate
Customizing settings.
If you already use your own programs (user exits) or Business Transaction Events to
manage printing, faxing, email or dispatching, check whether you need to replace
these developments with a function module enhanced to perform these functions.
IMPORTANT: Ensure that no data is overwritten.
Prerequisites
Technical Realization (FI)
Object type
BKPF (financial accounting document)
BUS3007 (customer account)
BUS3008 (vendor account)
Link table
TOA01
Document class
PDF
Document type
The following document types exist in the standard system:
FI document Document type Function module
Payment advice note FIOPAYAVIS FI_OPT_ARCHIVE_PAYMENT_ADVICE
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Storing Outgoing Documents (FI)
48 April 2001
Check FIOPAYMENT FI_OPT_ARCHIVE_ PAYMENT
Correspondence:
Payment notification
Bank statement
FIOPAYCONF
FIOACCSTAT
FI_OPT_ARCHIVE_CORRESPONDENCE
Dunning notice FIODUNNING FI_OPT_ARCHIVE_DUNNING_NOTICE
If you make changes in Customizing to the object types and document types, you will need to
adapt the corresponding function modules in each case.
Enhancements
There are no restrictions to the way in which sample function modules in the standard system
can be enhanced. They can also be duplicated for additional document types and object types as
many times as necessary.
You can define your own document types in the Basis Implementation Guide under
Basis Services SAP ArchiveLink System Settings Maintain Document Types.
To define you our own object types, on the SAP R/3 screen, choose
Tools Business Framework BAPI development Business Object Builder.
The sample function module FI_OPT_ARCHIVE_CORRESPONDENCE contains the
correspondence types SAP01 (payment notificiation) and SAP08 (account statement).
Additional correspondence types can be added to this function module. You can define
correspondence types in Customizing for Financial Accounting under the
Implementation Guide under
Financial Accounting Global Settings Correspondence Define Correspondence
Types.
Preparation and Customizing (FI)
To activate storage for financial accounting documents using SAP ArchiveLink, make the
following settings in Customizing:
1. If you want to make changes to the function modules (changing the document type
defined in the standard system for example) copy the sample function modules to your
name range. You should then make these changes in the source text.
For a detailed description of the procedure for copying sample function modules to your
name range, see the IMG documentation for the activity Use Business Transaction
Events (located under Financial Accounting Global Settings.)
2. Define the storage method in the function modules. Enter the setting in source text for
the parameter c_itcpo-tdarmod. The following settings are possible:
2 Store only
3 Print and store
3. Create a product with which all function modules that you want to activate can be
summarized at a later date.
To do this, choose the activity Use Business Transaction Events, located in Customizing
for Financial Accounting under Financial Accounting Global Settings. On the SAP
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Storing Outgoing Documents (FI)
April 2001 49
Business Framework: Business Transaction Events screen, choose Settings Products
... of a customer. Mark this product as active by selecting the Active indicator.
4. Assign the function modules to processes (Events).
To do this, choose the activity Use Business Transaction Events, located in Customizing
for Financial Accounting under Financial Accounting Global Settings. On the Business
Framework: Business Transaction Events screen, choose Settings P/S function
modules ... of a customer. In the table that is now displayed, enter the names of the
function modules that you want to activate, together with the Events or products required.
Enter also the name of the product already created.
The names of the processes defined in the standard system are as follows:
Function module Process
FI_OPT_ARCHIVE_PAYMENT_ADVICE 00002050
FI_OPT_ARCHIVE_ PAYMENT 00002060
FI_OPT_ARCHIVE_CORRESPONDENCE 00002310
FI_OPT_ARCHIVE_DUNNING_NOTICE 00001040
Activities
Storing outgoing documents (FI)
Outgoing documents are stored automatically if you have carried out the above-mentioned
settings in Customizing.
Displaying stored documents
Stored documents can be displayed as follows:
On the SAP R/3 screen, by choosing Office Business Documents Documents
Find lists
From the Accounts Receivable or Accounts Payable menu by choosing Master records
Display.
Enter the customer or vendor you wish to display, select one of the indicators under
Company code data and choose ENTER.
On the screen that is now displayed, choose System Display relationships Stored
documents.
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
SAP ArchiveLink - Archiving Scenarios (SD)
50 April 2001
SAP ArchiveLink - Archiving Scenarios (SD)
The following sections describe the archiving scenarios in the R/3 application component SD
(Sales and Distribution):
General sales and distribution (SD)
Sales support (SD-CAS)
See also
General Introduction (Seite 10) to this scenario documentation
SAP ArchiveLink (Extern)documentation
Sales and distribution (Extern) documentation
Sales support (Extern) documentation
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Optical Archiving of Incoming Original Documents (SD)
April 2001 51
Optical Archiving of Incoming Original Documents (SD)
Betriebswirtschaftlicher Hintergrund (SD) (Seite 52)
Weitere Voreinstellungen (Extern)
Spezial-Customizing (Extern)
Ablegen für spätere Erfassung (Extern)
Zuordnen und Ablegen (Extern)
Spät ablegen mit Barcode (Extern)
Ablegen und Erfassen (Extern)
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Business Background (SD)
52 April 2001
Business Background (SD)
The Sales and Distribution application component contains an SAP ArchiveLink function that
provides sales personnel with a quick and efficient means of optically archiving and processing a
wide range of incoming documents including inquiries, purchase orders, contracts, and
complaints. SAP ArchiveLink offers easy online access to these archived documents during the
planning, processing, and analyzing of business transactions in Sales and Distribution.
The SAP ArchiveLink interface supports the following archiving scenarios for incoming
documents in SD:
Early archiving
Late archiving
Late archiving using bar codes
Simultaneous archiving
Early Archiving
In the early archiving scenario, incoming paper documents are archived in the R/3 System before
an SD document is created.
In early archiving, the archiving process usually begins in a central mailroom where a designated
person opens, presorts, prepares, and records (scans) the incoming mail. Once an incoming
document is scanned and an incoming document type is assigned to it, the system triggers the
SAP Business Workflow to notify the authorized employee(s) that an incoming document has
been received and is due to be processed. When the employee accesses the archived
document, the system automatically calls up the relevant business transaction, such as Create
sales order, according to the incoming document type. After the employee creates and saves the
SD document, the system automatically assigns the archived document to it.
For a detailed description of early archiving, see Early Archiving (SD) (Seite 54).
Late Archiving
In the late archiving scenario, incoming paper documents are archived in the R/3 System and
assigned to existing Sales and Distribution documents.
In late archiving, an employee processes an original document directly from paper or carries out
a sales activity before receiving an original document. At a later point in time, the original
document is scanned into the system and archived as a facsimile. It is then assigned to the
existing SD document by:
The person at the archiving station who scans the original documents
The person responsible for processing the SD document
As in the scenario for early archiving, the archiving process usually takes place in a central
location at the company.
For a detailed description of late archiving, see Late Archiving (SD) (Seite 55).
Late Archiving Using Bar Codes
Late archiving using bar codes is a special form of late archiving. In this case, however, a bar
code is attached to the incoming document either in the mail room or at the time of processing.
SAP AG SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL)
Business Background (SD)
April 2001 53
An SD document is created from the original document whose bar code ID is linked to the SD
document number. Later, the original document is scanned into the system which recognizes the
bar code ID and automatically makes the proper assignment to the SD document.
For a detailed description of late archiving using bar codes, see Late Archiving Using Bar Codes
(SD) (Seite 56).
Simultaneous Archiving
Simultaneous archiving is a special form of early archiving in which the incoming document is
scanned into the system, optically archived and, at the same time in another window, the
corresponding SD document is created or changed. The system does not activate SAP
Business Workflow in this case; no mail is sent.
For a detailed description of simultaneous archiving, see Simultaneous Archiving (SD) (Seite 57).
SAP ArchiveLink - Scenarios in Applications (BC-SRV-ARL) SAP AG
Early Archiving (SD)
54 April 2001
Early Archiving (SD)
The following steps describe a typical scenario in which incoming paper documents are archived
before a Sales and Distribution document is created:
1. A clerk in the central mail room of a company receives a letter from a customer who wishes
to buy several products.
2. The clerk scans the letter into a scanning system.
The system displays the letter in the scan dialog window.
3. Using the SAP ArchiveLink interface in the R/3 System, the clerk or another designated
employee selects the function for early archiving and chooses an appropriate incoming
document type for the scanned document, for example, the general description Customer
response to a sales activity, SDIACTRESP.
4. The clerk confirms the assignment of the incoming document type.
This triggers a workflow in which a mail is sent to the employee who is responsible for
creating sales documents, in this case Mr. Jones in the Sales department.
All employees who are to be notified by SAP Business Workflow must first be listed
in the companys organizational structure (see Customizing for SAP Business
Workflow).
5. Mr. Jones receives the work item in his integrated inbox. When he calls up the work item for
processing, a dialog box appears in which Mr. Jones can confirm or overwrite th -
How Can i use Html frames with simple JSP???
How Can i use Html frames with simple JSP???
Actually i am creating an application in which i have used Index.html as frame.
Noew i am trying that if i click on a link of one frame(say menu frame) the \result shoul come to some other frame(say frame named mainwindow).
Hoe can i do like this???
Anand PritamWell i am using..
< Base target="mainwindow">
But it is no working is there some other way?? -
Can one make a template with live links?
I have a simple .htm file with 5 links going out, created with image map tool.
I'm going to create 80 similar pages, but different names, titles etc.
Is there a way to have a template with live links retained? (inserting a new jpeg image map each time)
Currently, I'm dragging in the big jpeg and re-creating the squares on it, and corresponding links out.
I don't imagine a template is possible for this, but it's good to ask. thanks.I'm still not sure I understand what you need. Sounds like the image map is the same for all the pages, but the image itself is different, although the images are the same size on each page. Is that it?
In that case, you could do this in a number of ways, but the best might be -
Make the page have a transparent PNG/GIF image the same size as the map that has the 5 mapped areas defined on it. Make the container for that image have a CSS BACKGROUND image that is the actual map. Specify this CSS background image's path in an embedded stylesheet in the editable region of the head of the page.
With this as the template, all you need to do on each page is to respecify the background image - since the embedded stylesheet is in an editable region that's do-able. In other words the TEMPLATE would be -
<html>
<head>
<!-- TemplateBeginEditable name="head">
<style type="text/css">
#foo {
background-image:url(path_to_map.jpg);
background-repeat:no-repeat;
</style>
<!-- TemplateEndEditable -->
</head>
<body>
<div id="foo">
<img width="map_width" height="map_height" src="transparent.png" usemap="#foomap">
<map name="foomap">
</map>
</body>
</html>
The map image can, itself, be in an uneditable region of the page.... -
Help! Ai CC - Can't see transform arrows and arrow for rotating when i work with simple rectangle!
I can't do simple transform with with shapes. Like in this video: Adobe Illustrator CC 2014: "Live Shapes" N.S.L: WEEK 155 - YouTube
Be,
I am afraid you are actually facing the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587
If neither this nor the Bounding Box (nor the Edges for some things), then it may be time for the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Banner ad with different links?
Hi all,
Is it possible to create a banner in FW that transitions between two states and to have each state link to a different page? I tried to accomplish this with hotspots, but clicking on the banner would direct to the same page for both stages.
To be clear, I would like clicking on the banner to take you to a different page, depending on which stage you clicked.
Thanks,
FredHello Nancy,
Thanks for the reply....
No, I really don't want to use Frames - I thought they were
considered evil these days?
Here is a link to my test page then, for you to see what I
mean:
It only has stupid holiday snaps in the gallery at the
moment, as I haven't put the actual photog galleries in yet, and
the links don't work - they're only there to test the layout and
the collapsible panel functionality at the moment.
http://www.burlemphoto.com/Scripts/PAGES/PLACES/Untitled-18.html
So, as I hope you can see, I just need a way of telling it
that if I click "Egypt", the gallery on the right changes to the
Egypt gallery, and then if I click on Life or Things or Contact
(outsdie the collapsible panel of Places), the Panel with collapse
and the relevant gallery will display on the right.
I have thought about doing it by having every gallery on its
own page, with the link-menu on the left the same on every page
except for each link being highlighted depending on what the
gallery is, but this will mean the collapsible panel won't really
have full functionality then, as it'll open smoothly but then a
link outside of it is clicked, it will just go to a page where the
panel is closed, so will look very sudden and not very elegant, so
I was trying to do it in a way that preserved the open/close motion
of the sidebar panel.
Also, I thought doing each gallery on a different page might
be quite an inefficient way of doing and thought there must just be
a simple way of telling the 'flashcontent' container to just point
to a different .swf file for each link clicked.
Any help would be greatly appreciated,
Many thanks
M -
Explain User exit concept with simple example
Hi friends
I am new member of this forum & i am learning ABAP.
Kindly send me user exit concept with simple example to my mail ID so i can able to use it.
mail ID [email protected]
thanks in advance
Thanks & RegardsCode SE18 is used to Identify the BADI available.
Look for the string 'CL_EXITHANDLER' in the standard program. This is a class which has a method 'GET_INSTANCE' which is used to trigger BADI's from the Standard Program. The interface parameter for this static method 'EXIT_NAME' is used to pass the BADI to the method.
Open Standard Program and do a global search 'CL_EXITHANDLER'.
SE18 > give the BADI name found through above search.
CUSTOMER_ADD_DATA > which has a method SAVE_DATA.
T.Code SE19 is used to Implement BADI.
SE19 > give the implementation name > Give the Definition name as CUSTOMER_ADD_DATA and the Short Text.
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
check any fo the below links. this will def help u.
http://www.allsaplinks.com/badi.html
And also download this file....
http://www.savefile.com/files.php?fid=8913854
There are other tutorials on this site...
http://sapbrain.com/Tutorials/tuto_download.html
What are BAdIs?
-> is an anticipated point of extension these points act like sockets and exist in the original source code
-> based on ABAP Objects. BAdI defines an interface that can be implemented by BAdI-implementations that are transport objects of their own
->Important! There are 2 roles: Enhancement Option-provider & Implementer.
-> In the above context, Enhancement Implementation can be done only if option (hook) is provided by the Option-provider. In simple words there are no implicit BAdIs.
Note: In the following slides, Definitions are created so as to understand the method of BAdI definition & for example purpose. As stated above this is the role of Enhancement Option-Provider.
Classic BAdIs already exist since SAP Release 4.6
BAdIs have been Re-implemented in ECC7.0 under the new Enhancement Framework & Switch Framework
Classic BAdIs
To understand what a powerful pattern a BAdI is, we will now define & then implement a BAdI
BADI Class is created automatically.
The various options are described below in detail:
1. Enhanceable: Enhanceability of filter types can only be specified for filter-dependent BADI definitions under very special conditions. For example, the domain belonging to the filter type must be linked with a value table that is of the type E or G. A BADI implementation can then be created in one step by creating a new filter value that is automatically entered into the value table at save and also copied into the transport order of the BADI implementation. In addition, it is also possible to create a new filter value and, at the same time, a BADI implementation with the same name. Naturally, you can also specify existing filter values.
You should select this feature if there is a prerequisite that a new filter value is created together with a new BADI implementation - that is, that BADI implementations are not created solely with existing filter values, although this, too, is possible.
2. Multiple-Use
3. Filter-Dependent
Instance Methods can access all of the attributes of a class and can trigger all events of a class. Static Methods can only access static attributes and static events.
Exceptions:
Events:
Events can be defined in classes or in interfaces. Corresponding methods can trigger these events with the RAISE EVENT statement. Each class (or interface) that is going to handle the corresponding event must implement a relevant handler method, and register it using the SET HANDLER statement. When an event occurs, the system calls all of the handler methods registered for that event.
Like method definitions, events have a parameter interface. The only difference is that events may only have EXPORTING parameters.
BADI : Businees Add IN's
Business Add-Ins are SAP enhancement technique based on ABAP Objects.
Where the SAP standard program is not going to fullfill the client requirement , we are going to add our own program to SAP standard program, without changing the standard prog.
Each Business Add-In has
at least one Business Add-In definition
a Business Add-In interface
a Business Add-In class that implements the interface
Each BADI has two different Views.
1.Definition view
2.Implementation view
T.C for BADI Definition is SE18.
T.C for BADI Implementation is SE19.
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Have a look at http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
How to develop BADI
Rewards if useful. -
Creating Bookmarks with Relative Links
Can anyone suggest a plugin, or post examples of code to create a bookmark in Acrobat programmatically. And have the bookmark work with RELATIVE links. Meaning if you have a bookmark for page 15, and you insert 5 pages at the begining of the document, that bookmark would move to page 20. When you create the bookmark with a javascript "go to page", script... when you insert the pages, your bookmark would still point to page 15, the wrong page.
Any suggestions, hints, web sites to look at, all appreciated. Thanks."Is that what you meant?"
Yes. You can download the VBA example or I can state it as VBScript.
"Sendkey" may be a problem but you can add some error-traping.
The same you can archieve with "Menuitemexecute", but you have only one problem more.
You have to check the registry (if it is free for use) and finaly you have to send the key {enter} to close the action.
As I said I work with mbtPdfasm for setting bookmarks in a batch. It's much more simple and I can give it to co-worker.
The other acobat based method without using JS or writing a plugin is to use pdfmark.
You have to produce a ps-file with the commands to set up the bookmarks, then you have to send it to the Distiller.
After writing that PDF with bookmarks and necessary blank pages you can replace that with the real pages.
That sounds not only cumbersome. It is - but it works.
So for me mbtPdfAsm is the solution for reading/writing simple bookmarks.
best regards, Reinhard -
Submit a html:form with a link
Hey everyone I have a html:form which am I correctly submitting with html:submitt buttons. But I was told to submit with links and not buttons :S So I'm trying to do it. I'm trying to do it like this:
<html:form action="/UpdateDeleteColecao.do" method="post" focus="colecao">
<table border="0" align="center">
<tr><td width="50%"> Cole��o </td><td width="50%"><html:text property="colecao" value="${requestScope.col.colecao}" readonly="true"/></td></tr>
<tr><td width="50%"> Descric�o </td><td width="50%"><html:text property="descricao" value="${requestScope.col.descricao}"/></td></tr>
<tr>
<td width="50%" align="center">
<html:link action="/UpdateDeleteColecao.do"> <bean:message key="button.add"/> </html:link>
</td>
<td width="50%" align="center">
<html:link action="/UpdateDeleteColecao.do"> <bean:message key="button.delete"/></html:link>
</td>
</tr>
</table><br/>
</html:form> It is not working. I get the following error:
java.lang.NullPointerException
auge.form.AddColecaoForm.validate(AddColecaoForm.java:39)It works perfectly with the html:submit buttons. My action is a LookupDispatchAction. Is there a way to do it? Oh, a second question. What if I wanted to put the submit links to this form in a second frame, would that be possible?
I wouldn't wanna use Javascript, because if it's disabled everything will fail terribly. SO, I wanna know if there's any other way.
ThanksI cannot use the typical regular HTML "a href",
because I have to call a struts action.No... you said you have to submit the form with a link. A link is an "a href", it's exactly what <html:link> generates. But a link cannot be used for form submitting except by invoking Javascript to do it programatically.
Using an action in <html:link>, presuming that's really refering to an action and not just the href value, which is what I'm not really sure of. It's been a while since I've used Struts. So maybe the action is the href part, and you can put "javascript:void(0);" there?
But I'm absolutely positive about the HTML/Javascript aspect. Struts tags don't alter how HTML works. They just make generating some HTML content easier. But in this case, I'm not sure that's helpful because I never found a simple way to get the actual form name that the <html:form> creates. -
Update emial address with confirmation link
Hi,
I am using registration process like this one, described at Mr Schenk web:
http://www.guenter-schenk.com/tutorials/tutorial.php?id=1
There is e-mail adress, used in registration process to activate account by clicking a link.
I am going to give a possibility to change(update) that email address in user profile but in safe way. For example with additional password checking and email sending to the new address with confirmation link which should by clicked to make change.
Is there any simple method implemented in Developer Toolbox? Maybe I should use 'send email' trigger with content which include earlier preapered url (confirmation link) ?
Thanks in advance.Heya,
Use an insert record form with send email trigger. I would have another db table for "new address" with fields for user_id(foreign key based off session variable), new_email, random_key, email_confirmed that passes users id and new_email to the table and generates a random key. Then send email SB to new address. In content of send email have a generated URL of confirmation_page.php?URL parameter of random key&URL parameter of new_email&URL parameter for user_id.
In confirmation_page have MySQL update "new address" table for email_confirmed field where URL parameter for random key && URL parameter for new_email == table fields in "new address" database. Have it write over any other record in the table based off query where user_id in table == user_id from URL parameter && URL parameter random_key && new_email so any "old, new email addresses" for the user will be overwritten in the database. Then place a MySQL update table where email_confirmed is set on "new address" table to update "users" table for new email address based on foreign key user_id.
This is not really something that is entirely available out of box from ADDT. You would have to use a combination of insert record SB+send email+ MySQL hand coding. The explanation should give you enough to go on if you know some code.
Good luck! -
Looking for wifi TV with simple browser capability
Does a HD wifi TV exist with simple browser capability? IE, I want to surf the net on the TV or connect it via IP to my security web server. I need a browser to do this.
ThxSorry i typed out a whole lengthy post and it was taken off as it had links to AMZ because they had a chart of features for TVs.
Basically the Sony gt1 series (google TVs) have a built in browser.
High end samsungs(PNxxD8000, UNxxD8000/7900/7000/6300) also the 8000 series has a QWERTY lcd digital remote that comes with the TV.
And Some of the higher end LGs have a built in browser (most have the "wand" remote to go with it. -
Creating a link with the Link Tool
I used the Link Tool to create a Link in my pdf file. The link is set to open a website file. I created 2, one with just a little text and the other was a picture that was 200 X 300 px. When I follow the links, each is opening a full web page. I expected that with the Text link because I put the text on an html page but the picture I sized to the 200X300 but that opened a full web page also. When setting up the link to the Web File I did not see an additional settings as far as how to open the web page such as _parent or _child etc. I believe it is normally the Target.
Does anyone know how I would either do this with the link tool or know of a better way to do it overall?
Thanks
BobHi,
You may be confusing HTML markup for links with PDF links.
In PDF, HTML markup is not applicable.
So "target_xxxx" or any other HTML 'stuff' cannot be used.
For the graphic file (JPG, PNG, whatever), make a web page file that is configured to display the graphic file in a manner you desire.
The web link you set in the PDF, with Acrobat, will result in this web page file opening.
This is the file that will control how the graphic is rendered.
If needed, a resource for HTML "how to" is W3 Schools.
Be well... -
Issue with Report Links in OBIEE
I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
Any idea why this is happening?
Your suggestions are welcome.
Please help
Regards.
Edited by: 810008 on Apr 14, 2011 1:39 AMEdit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
M. -
Adobe Reader Splash--I have a PDF file that whenever I try to open it suggests using Adobe Reader with a link to download Adobe Reader. I can't get beyond this. I have made Preview the default for all PDF's and yet this persists. I have also deleted Adobe Reader. This particular file is a portfolio, btw.
I have similar issue. Did u find an answer?
-
I have received an email from a friend with a link which I clicked. It took me to the google home page. I am now suspicious that my friend's email account has been hijacked and the link contained a virus or a Trojan horse. I would know what to do on my PC but am new to the IPad. Can any form of Trojan horse be planted on IOS 6 or am I worrying unnecessarily? Reassurance would be most welcome as I do use the IPad for checking bank details and web purchases. Thanks for any help.
PC virus won't run on iPad.
Maybe you are looking for
-
What is the importance of "CONTROLLER" in proxy structures generated
Hi, i have created a proxy for service interface in ESR. i can see one field "CONTROLLER" of type PRXCTRLTAB (Control Flags for Fields of a Structure ) in all of structures generated for proxy. i have given functional specification where in one of th
-
Datasocket read stop but shared variable can update
Hello , I program with datasocket open/read, sometimes the read stops and after some time,maybe 10s, it go on reading, I compare this with shared variable (DSC) and found the shared variable can update ,I don't know what happen to my program. ( the r
-
Can i update my "open box" macbook pro to osx mountain lion for free?
Hi, i had recently bought an "open box" macbook pro 13 in. I bought it in the time that apple has said a mac would need to be bought to qualify for a free update. Nut according to apple, my mac was bought in December of last year. Is there any way i
-
How to make mono recording play both left and right channels
I have an old mono recording that plays only on the left channel. How can I copy it to play on the right so I'll hear it on both channels? I put it on itunes and then tranferred it to Garageband in hope I could finally get it to play on both channels
-
Flash Video Framerate Problem in CS5
I just upgraded from DW CS3 to CS5. After inserting an .flv on a page, on previewing the page with IE, it looks like the framerate is about 15 fps instead of 30 fps. If I open the page in CS3 and insert the video, it previews at the normal frame rate