Navigating from Summary Report to Detail Report in OBIEE 11g

Hi,
I have creted two reports.One corresponds to Summary and the other Detail.By clicking on one of the fields in
the Summary report the values are captured and then the detail report is displayed based on the values selected.
Now,What I need to know is whether I can populate the values I have selected in Summary Report(values correspond to only a single field) as some text in the Detail report.
I am using 11.1.5 just in case you need to know,but any help would be greatly appreciated.
Regards
Navin.G

another way if you want to stay in one document and continue to use drilling is to build 2 blocks and hide/unhide as you drill
block1 - shows your totals
block2 - shows the details
then use block hiding (see below) to cause block1 to disappear when you drill past a certain level. using the same (but opposite logic) you would have block2 appear
block hiding in webi - how to:
sadly webi doesnt have this feature directly the way that Crystal does but you can emulate it using SHOW WHEN EMPTY,block filtering and DrilFilters. The latter detects your level of drill.
block1 filter formula - return a TRUE result when DrillFilters tell you that you havent drilled into detail yet. Set SHOW WHEN EMPTY=No
when you do drill Block1's formula will be FALSE, the block will then technically be EMPTY and therefor wont show
Block2's filter logic will return FALSE when DrillFilters tells you that you are still on Block1's level of drilling. But when you drill Block2's level of drill, DrillFilters in Block2's filter formula will return TRUE and its rows will be returned. It wont be empty so it will show.

Similar Messages

Summary and the Detail Report

Hi All,
I want to create a summary and detail report in two different layouts on one single report,based the input summary or the detail report shoud execute...,how to do the same.
Thanks in advance
C.Somasundaram

Hi,
bring your two different layouts in seperate frames and write format triggers on this frames to show or suppress them (depending on your input). Connect the two frames with an collabsing anchor.
Regards
Rainer

Create Summary Report w/Detail Reports

I have created a detail report (or tab within the document) that shows the monthly revenue per customer & calculates average monthly revenue per customer. How can I create a summary report (tab within the document) that only shows the customer & the average revenue per customer (so it does not bring back multiple lines for each customer)? This would allow my users a quick view of the average rev per customer and then could go into the detail to see the monthly rev per customer.

Thanks everyone, sorry for not being more descriptive (obviously I'm new to this!). So in my document I have a simple table that looks something like this:
Name               Contract Date           Month                  Revenue
John Doe          3/1/2011                   April 2011            $1.00
John Doe          3/1/2011                   May 2011             $1.00
                                                                 Monthly Ave:     $1.00
Jane Doe          1/1/2011                   March 2011           $1.00
Jane Doe          1/1/2011                   April 2011              $1.00
Jane Doe          1/1/2011                   March 2011           $1.00
                                                                 Monthly Ave:     $1.00
The monthly Ave is a simple calculation (=ave) that I added when I split the table.
What I'd like to do is have another "tab" (report) in the same document that summarizes that data to be something like this:
Name          Contract Date          Monthly Ave
John Doe          3/1/2011              $1.00
Jane Doe          1/1/2011              $1.00

E-Mail Summary Report and Detailed Report Automatically

Hi, I have just started a new job (1st IT job since leaving college) and I've been told that our Small Business Server 2011 used to email a Summary Report directly to a specified email address, as well as a weekly Detailed Report to the same email address,
but that has stopped sending reports now. How do i make sure that the reports are automatically generated and sent out via email to the specified address. Any help would be great.

Hi,
Based on your description, I understand that there some issue occurred in Report feature in the SBS 2011.
On current situation, please refer to following steps and troubleshoot this issue. Then check if can help you.
1. Login the SBS server. Please open Windows SBS Console and select
Reports tab. In the Reports panel, select a report (Summary or Detailed), then View report properties. In Report Properties page, please select
E-Mail Options to check if had added the correct user account or e-mail address. Also please select Schedule tab, and check if had configured correctly.
2. Then manually click
Generate report option in Tasks. Please check if successfully generated the report. If not, please refer to following TechNet article and repair Monitoring and Reporting features in the SBS server. Then monitor the result.
Repair Monitoring and Reporting Features
in Windows Small Business Server 2011 Standard
3. If generated the report successfully, please manually click
Generate report and e-mail report option in Tasks. Then check if run successfully. Or any error message occurred?
4. If this issue still exists, please refer to following path: C:\Program Files\Windows Small Business Server\Logs\MonitoringServiceLogs and check if there has some log files
which be related to Report (Summary or Detailed). If has, please check if can find some more clues. Meanwhile, please open Event Viewer and check if find some relevant errors. Those may hope us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to pass Presentation Variable Value from Main Report to Detail Report

Hello,
I've 2 reports that is attached to each other. In my main report i've several report prompts and i am using i"s prompted" on my detail report to attach them.
But 2 of my report prompts are presentation variables(Names : FIRST, SECOND). Both are in date format. I've a filter in my main report like;
"ASSIGNMENTS_F"."EFFECTIVE_START_DATE" BETWEEN @{FIRST} AND {SECOND}
It works fine when i run the main report. But when i click on the numbers, i see that i can not filter my detail report with the chosen values for 2 presentation variables. It just shows all the dates.
I've tried adding both presentation variables in both reports as columns and adding 'is prompted' filter to them. But did not work either.
I just cant pass the written values for presentation variable prompts to detail report..
Please help :)

Hi,
What you can try is refer the filte condition in the main report to the detailed report with the option--> Filter based on another request.
Or you try creating another intermediate report which will refer the main report filters and pass the filters to the detailed report.
Hope this helps.
Regards
MuRam

Interactive Reporting: master-detail report

Hi,
I wonder if it is possible to have a kind of master-detail pair of reports.
For example I have one report containing a crosstab with product groups in the down "dimension". When I click on one of those product groups a second report should appear with the children of the product group, the products.
Is there a sort of binding variables or getting it from one report to another?
Oliver

If you are using the iHTML version of the tool for viewing the report there is a possible way. It involves using a SmartCut to the Target/Detail Report and passing parameters on the URL which then are interogated in the OnStartup script of the Target/Detail Report.
Start with Master File.
Create Computed Column in Results Section that combines the SmartCut URL and Parameters into a HREF Link.
Put that column into Report Section as Table Dimension
When the Report is viewed in Interactive Reporting Web Client you will see the code of the HREF. When it is viewed in the iHTML client you will see the link.
Wayne Van Sluys
TopDown Consulting

Master-Detail Event in Obiee 11g

Hi all,
In master report i am using item family.
Detail report columns are item family,item name, cost and revenue.
Same analysis i created graph and table view.
When i am selecting item family in master i am getting correct changes in detail graph but not in table view.
Pls guide regarding this.
Thanks in advance.

Hi,
Have you correctly specified the channel names in both the views.
Refer
http://gerardnico.com/wiki/dat/obiee/master_detail
http://oraclebiblog.blogspot.com/2011/01/working-with-master-detail-report.html
Hope this helped/ answered
Regards
MuRam

How to drill down from summary report to detail report using RRI?

Dear all:
A problem about RRI. Please help me!
1.I create a BEx query 'Q1' to show summary data.
2.I create a BEx query 'Q2' to show detail data.
3.In Q1, all the products are shown each row.
       The 1st coulmn is 'Balance in the begin', it shows how many customer claim cases are opened before this week.
       The 2nd coulmn is 'New', it shows how many customer claim cases are initalized in this week.
       The 3rd coulmn is 'Close', it shows how many customer claim cases are closed in this week.
       The 4th coulmn is 'Balance', it shows how many customer claim cases are still opened now. And this column is calculated by this fomula as follow:
         'Balance in the begin' + 'New' - 'Close'
   4.In Q2, it lists each customer claim case. Include ClaimNo, Sold-To Party, ProductNo...
   5. I set Q1 as sender, Q2 as receiver.
   6. If I focus on the value of 'New' or 'Close' and then go to 'Q2', the correspond detail calim information in 'Q2'. But it is fail if I focus on the value 'Balance'.
   Why?
Thanks,
Jolin

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

Drilling from summary report to detail report - possible?

Hi All,
I'm new to Business Objects and am currently using Web Intelligence with Business Objects 12.1.
I'm writing a report that shows the % of males and % of females that like drinking Coca Cola.
Is it possible for me to set the report to drill through from the percentage summary to a list of people behind the data?
Can anyone provide me with a link if it is? I can see a drill icon in Web Intelligence but I'm not sure if that's what I need...
If anyone is familiar with Microsoft Reporting Services I'm looking to navigate through reports as you would there.
Thanks!

another way if you want to stay in one document and continue to use drilling is to build 2 blocks and hide/unhide as you drill
block1 - shows your totals
block2 - shows the details
then use block hiding (see below) to cause block1 to disappear when you drill past a certain level. using the same (but opposite logic) you would have block2 appear
block hiding in webi - how to:
sadly webi doesnt have this feature directly the way that Crystal does but you can emulate it using SHOW WHEN EMPTY,block filtering and DrilFilters. The latter detects your level of drill.
block1 filter formula - return a TRUE result when DrillFilters tell you that you havent drilled into detail yet. Set SHOW WHEN EMPTY=No
when you do drill Block1's formula will be FALSE, the block will then technically be EMPTY and therefor wont show
Block2's filter logic will return FALSE when DrillFilters tells you that you are still on Block1's level of drilling. But when you drill Block2's level of drill, DrillFilters in Block2's filter formula will return TRUE and its rows will be returned. It wont be empty so it will show.

Navigation from one column to different Reports

Hi,
I am using 10g.In Answers i have a doubt.
I have a column with 30 values.These are the different Entities.
So when i click on any entity it needs to go to particular Entity Report.Is it possible with any case conditions.
And i have developed 30 Reports.
Note: Here i am providng centralized report when user login into the Dashboards. Based on the that needs to navigate
Thanks

Hi,
You can create one viewset. In one view set you can place any number of views.
According to your question
1. create viewset
2. place the views in viewset
3. place outbound plug in the first view amd place the inbound plug the second view. connect those two views witg navigation link.
4. place the outbound plug in secondview and place the inbound plug in thirdview. connect secondview and thirdview with navigation link
5. create two actions through actions tab.
6. create two buttons. Go to properties of the first button and bind the first actions. Similary second button.
7. go to implementation of that actions.
wdThis.wdFirePlugToDisplayView();
this is the sample code in section view to display view.
here we are passing the parameters from one view to another view.
wdThis.wdFirePlugToDisplyView(wdContext.currentContextElement().getOptions(),wdContext.currentContextElement().getSecondLevel(),wdContext.currentContextElement().getThirdLevel());
Regards,
Saraswathi
Pls reward points for useful info.

Navigation from a chart to different reports depending on dimension value

Hi all,
Quick question: Imagine you have a bar graph based on a metric displayed for a specific dimension (#items sold by geographical regions). In this case each different bar represents the different dimension value (the different geographical region). I know on clicking a graph, the action can be drill down (if the dimension supports it) or a navigation to another report.
What i need to do is navigate to another report, and filter that report according to the actual bar ive selected (i.e. in this case im taking to a report with additional detail but only for the region i have clicked on in the bar graph).
Any ideas?

In the target report, just set the dimension column as IS PROMPTED. and in the main report chart set the navigation to the target report. thats it, now when ever you click on the value that passes the dimension value to target report.

Table from which all requests details report can be extracted

Hi to all
I would like to know from which table we can have a look on all request details which are in quality but not in production
i want move prd data to quality if i does this all request are getting vanish in quality
Regards

Hi,
I guess you mean transport request. I don't think that such table exists. If you're on quality and you're able to see requests that were imported in production then most probably these data are read with some FM from production system.
Normaly you can see transport requests in tables E070, E071 and so on, but these refer to current system, not a remote one.
Best regards
Marcin Cholewczuk

Passing Job ID, Job instance from Agent to EJB-based action in OBIEE 11g?

We would like to ZIP compress Agent-scheduled report output, according to documentation using "Java Jobs" is an option but not recommended in 11g (only upgraded from 10g). Instead EJB-based java actions should be used.
Documentation has explanation of EJB-based Java action, however there's a problem when an Agent invokes the EJB-based action how can it pass out Job ID and Instance ID, etc so the custom action can refer to the related job information? When using "Java job" approach it offers public interfaces to do so. In EJB-based action there seems no information provided, the example in the documentation only demonstrates user to enter parameter values manually without any way to pass out parameter from the invoker (e.g. an Agent).
In this case, is there any public interface or any other way that an Agent can pass out Job ID related values when invoking an Java method? This seems also true for other actions like invoking web services, HTTP service, etc that no Job parameter can be passed out.
Thanks.
geoff

998365 wrote:
[OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004rSLEMUx3AtH4pzSt1iW000119000000] [tid: 871b810] [68013] Scheduler service started.
[OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004rSLEMUx3AtH4pzSt1iW000119000000] [tid: 871b810] Scheduler service started.
[OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004rSLEMUx3AtH4pzSt1iW000119000000] [tid: 871b810] [71076] Oracle BI Scheduler crmtest6:9705 has been changed to an Inactive state.
[OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004rSLEMUx3AtH4pzSt1iW000119000000] [tid: 41222940] [43071] A connection with Cluster Controller CRMTEST6:9706 was established.
[OracleBISchedulerComponent] [NOTIFICATION:1] [] [] [ecid: 004rSLEMUx3AtH4pzSt1iW000119000000] [tid: 41222940] [71075] Oracle BI Scheduler crmtest6:9705 has been changed to an Active state.*
[OracleBISchedulerComponent] [WARNING:1] [] [] [ecid: 004rSLEMUx3AtH4pzSt1iW000119000000] [tid: 41222940] [43065]from the log it looks like its started as it changed the state to active. are you able to connect to database using biplatform schema details?

Resetting Selection from a Multi-Select Dashboard Prompt in OBIEE 11g

Hi all,
I have a dashboard prompt, containing 3 columns which all are set to allow multi selection and default value is all values.
In 10g, after choosing some values in one of the prompt and clicking Go button, I can manually remove all my selection to reset it back to the default value (which is all values).
In 11g, however, I am not able to find how to do it. The reset button doesn't reset back to the default value (which is all values). So what I have to do is to use the "Clear All Customization", which will clear all my selection for all the prompts.
Any suggestion on how to do this? Thanks in advance!

Hi Deepak, actually I don't need any script to do that in 10g.
It's a built in feature in 10g. If you remember, for multiselect prompt in 10, we will click the "..." button to show the box for value selection. Then we can move values from left box to the right to include them, or vice versa to not include them. So by moving the values from right box to the left, I essentially revert to default value which mean all values will be shown.
In 11g, this box is not shown anymore, instead we are checking the values one by one from a drop down list.
Any suggestion? Thanks.

Filter condition not working when Navigating from Main report to detail

Hello,
I have one report in OBIEE 10.3.4. Below is the filter condition used in Main report:-
(Customer Secondary Organization is equal to / is in BMS OTHER C
AND Customer Tertiary Organization is equal to / is in S&FO )
OR Customer Secondary Organization is equal to / is in MKTG
Also in my detail report I am using the same filter conditions:-
(Customer Secondary Organization is equal to / is in BMS OTHER C
AND Customer Tertiary Organization is equal to / is in S&FO)
OR Customer Secondary Organization is equal to / is in MKTG
Now when I am navigating from Main report to Detail report, then this filter condition is getting overridden by below condition:-
Customer Secondary Organization is equal to MKTG
and Customer Tertiary Organization is equal to S&FO
or Customer Secondary Organization is equal to MKTG
What I noticed is If I rearrange the filters and make it as below:-
(Customer Secondary Organization is equal to / is in MKTG
AND Customer Tertiary Organization is equal to / is in S&FO)
OR Customer Secondary Organization is equal to / is in BMS OTHER C
Then I am getting the filter in detail report as:-
Customer Secondary Organization is equal to BMS OTHER C
and Customer Tertiary Organization is equal to S&FO
or Customer Secondary Organization is equal to BMS OTHER C
It is taking Secondary Organization which is 2nd one in the main report.
Can anyone please help me on this.
Thank You,
Shivam Saxena

Hi,
What you can try is refer the filte condition in the main report to the detailed report with the option--> Filter based on another request.
Or you try creating another intermediate report which will refer the main report filters and pass the filters to the detailed report.
Hope this helps.
Regards
MuRam

Navigating from Summary Report to Detail Report in OBIEE 11g

Similar Messages

Maybe you are looking for