Navigation is cached - even when navigation cache is disabled?!

I seem to have a problem clearing the navigation cache. Whenever I change a role of workset in the PCD, the change is not visible until some time has passed (perhaps 100 minutes, I will try to verify that).
If I change a page (like inserting a new iView) the change is visible immediatly.
This sounds like a fairly standard "flush the navigation cache" problem, but that does not solve the problem. I have disabled all the caches in "System Administration -> Navigation -> Navigation cache" and have also cleared all of them just for good measure.
I have used Firebug in firefox to verify that this is not a browser cache problem. For example I have a folder in the role that contains two pages. I add a third page, flush all browser caches, close the browser and reload the page. In firebug I can see that I get a "200 OK" response that only includes the original two pages - not the new third page.
I have also tried clearing the PCD cache in "System Administration -> Support -> Portal Content Directory -> PCD Administration -> Release cache". When I do that I can see (again with firebug) that the request is taking slightly longer the first time (around 300ms instead of the usual ~70ms). However, the new page is still not visible.
The only thing that help (besides waiting) is to restart the entire portal. The changes are then visible immediatly.
I have even tried clearing the HTTP cache, which also does not help.
What other caches could there be besides the navigation cache, the PCD cache, the HTTP cache or the browser cache? How can I debug this problem further?
Thanks in advance.
Best regards,
Ole Hyldahl Tolshave
P.S. We use SEP EP 7.00 SP21
Edited by: Ole Hyldahl Tolshave on Jun 17, 2010 10:21 AM

Hi Tobias,
I tried clearing the DB cache (by using /irj/servlet/prt/portal/prtroot/com.sap.portal.prt.cache.PRTRegionDBClear). No change (change to role is still being cached).
I used the PCD Inspector and verified that the contents are identical to what I see in Content Administration -> Portal Content (which is different from what is rendered in the top navigation and detailed navigation).
We only have one server node running.
I tried deploying the .PAR-file from SAP support (and restarted). This made no changes so now I am waiting for them to get back to me.
But thank you again for trying to help.
Best regards,
Ole Hyldahl Tolshave

Similar Messages

  • My voice command keeps turning on by itself even when my siri is disabled.

    my voice command feature keeps popping up in the middle of anything im doing, even when my siri is disabled. My ipod also plays music randomly and the time on my screen blinks a few times. Has anyone else had any of these problems? 

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. The headphone jack can actuate VC.
    - Try another pair of headphones, Ones with mic/remote wold be best

  • Integration Builder - runtime data cache - Error when creating cache list

    All,
    When I go into the Integration Builder --> Administration --> Runtime tab --> Data Cache
    I get a message saying "Error when creating cache list".
    All cache areas look ok and I do not see any other error.
    Also, RFC INTEGRATION_DIRECTORY_HMI looks good.
    Please advise.
    Thanks a lot.

    Hi,
      Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
    For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
    For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
    If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
    Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
    Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
    regards,
    ganesh.

  • Stale Near Cache data when all Cache Server fails and are restarted

    Hi,
    We are currently making use of Coherence 3.6.1. We are seeing an issue. The following is the scenario:
    - caching servers and proxy server are all restarted.
    - one of the cache say "TestCache" is bulk loaded with some data (e.g. key/value of : key1/value1, key2/value, key3/value3) on the caching servers.
    - near cache client connects onto the server cluster via the Extend Proxy Server.
    - near cache client is primed with all data from the cache server "TestCache". Hence, near cache client now has all key/values locally (i.e. key1/value1, key2/value, key3/value3).
    - all caching servers in the cluster is down, but the extend proxy server is ok.
    - all cache server in the cluster comes back up.
    - we reload all cache data into "TestCache" on the cache server, but this time it only has key/value of : key1/value1, key2/value.
    - So the caching server's state for "TestCache" is that it should only have key1/value1, key2/value, but the near cache client still thinks it's got key1/value1, key2/value, key3/value3. So in effect, it still knows about key3/value3 which no longer exists.
    Is there anyway for the near cache client to invalidate the key3/value3 automatically? This scenario happens because the extend proxy server is actually not down, but all caching servers are, but the near cache client for some reason doesn't know about this and does not invalidate the cache client near cache data.
    Can anyone help?
    Thanks
    Regards
    Wilson.

    Hi,
    I do have the invalidation strategy as "ALL". Remember this cache client is connected via the Extend proxy server where it's connectivity is still ok, just the caching server holding the storage data in the cluster are all down.
    Please let me know why else we can try.
    Thanks
    Regards
    Wilson.

  • Firefox immediately switching to new tab even when that feature is disabled on right-click open in new tab or on ctrl+click a link. Please help.

    Firefox switches immediately to new tab or the immediate next tab if multiple tabs are open, even when the respective feature is disabled, whenever I open a link by -
    1. Right-click > open in new tab
    2. Ctrl + click a link
    Earlier it did not happen like this. It is really very annoying. Re-installation and clean installation of the latest version did not helped.
    And this is happening mainly when I am using Facebook. Earlier it never happened so with Facebook.

    I don't have the divX plug-in and I still have this problem. Why should plug-ins that are not even triggered by the affected pages alter Firefox's behavior. Feels like bad architecture.

  • HT1600 This update fails every time, even when rebooting, cache clearing, etc...

    Anyone else having troubles with this update installing? My Apple TV just said it is available today (12/07/2012) so tried to update. Each time it goes through the entire 1 of 2 process and then fails. Message appears saying to restart the device and try again. After restarting and trying again I get the same message. Tried clearing the cache and retrying. Still fails. Any other thoughts???

    I have followid information found on another forum and have managed to successfully install the update. It appears the issue is tied to the Ethernet connection. Strange, usually the problems I have with my Apple TV3 are related to using Wi-Fi rather than connecting via the Ethernet Cable.
    At this point I have tried the following:
    Reboot the device as suggested by the on screen information. (no resolution)
    Clear the cache and reboot. (no resolution)
    Unplug the AppleTV power cable and let sit three minutes before repowering. (no resolution)
    Unplug the Ethernet Cable and connect to the Internet via Wi-Fi. (solves the problem)
    Apple needs to test these updates a little further and make sure they work on all methods of connecting. The issue should have been remedied quickly by either fixing the patch or at minimum sending us an E-Mail notifying us of the error. In fact, why am I not getting an E-Mail letting me know that a new version of software is out? Isn't that one of the things we opt-in for when signing up for accounts?
    For a direct link to the help document I followed use: http://www.macobserver.com/tmo/article/how-to-fix-the-apple-tv-5.1.1-ethernet-up date-bug

  • Outlook Delegate Showing up in Lync even when Enterprise Voice is disabled

    Hi, we have encountered an issue in our testing phase of Lync 2013 deployment.
    Users are noticing after they sign into Lync for the first time they are getting messages saying "You were added as a delegate for Employee Name".
    These users were at some point in time, set as a delegate for Employee Name, but delegation has since been removed. If we go into the Employee's Outlook and check their delegate settings nothing is listed there.
    What's even more perplexing (and nonsensical from a design point of view) is that since we do not have Enterprise Voice in our environment, users aren't able to go into Lync and delete/manage delegates. Without EV enabled, the "Call Forwarding"
    tab in Options does not show. Why would the management of delegates not be available in Options if the Lync Client is still able to perform delegation of Lync Calls? What a silly oversight.
    Not only that, but why would Lync even pull delegation settings from Outlook when a user isn't even enabled for Enterprise Voice? So someone wants to give access to their calendar, they are automatically giving rights to that person to make Lync calls on
    their behalf too? I don't see any option in Outlook delegates that manages these permissions. This simply doesn't make sense and I'm dumbfounded as to why MS wouldn't have fixed this in 2013, considering it was also an issue in 2010:
    http://social.technet.microsoft.com/Forums/windows/en-US/3dbfb19a-c8dd-4d66-bba3-c9865a457625/how-do-i-remove-a-lync-delegation
    Is there some other way to remove ghost delegates from Lync user accounts?
    Environment is Lync 2013 Standard + Exchange / Outlook 2010.

    You can use the Tool SEFAUTil.
    This tool can modify delegation settings.
    For detailed steps, you can refer to the following blog:
    http://blogs.technet.com/b/scottstu/archive/2014/03/30/configuring-delegation-for-lync-users-that-are-not-enterprise-voice-enabled.aspx
    To remove a delegate, use the parameter /removedelegate instead of /adddelegate in the blog.
    Lisa Zheng
    TechNet Community Support

  • IPod Showing Up As Removable Disk Even When Disk Use is Disabled

    Hi there,
    I'm having a problem with my iPod and Vista. My iPod is showing up as a removable disk even though I do not have "Enable Disk Use" checked. This is confirmed by the fact that I can disconnect my iPod without having to eject it first.
    I've tried checking and unchecking the text box. It works the first time, but when I reconnect the iPod, the disk shows up again.
    How can I permanently disable disk use?
    Appreciate any help you can give.

    Have you tried performing a RESTORE on the iPod when connected to iTunes?
    Patrick

  • If my computer gets unexpectedly shutdown then why on restarting computer firefox keeps me logged in even when saving password is disabled ?

    my computer gets unexpectedly shutdown while i was logged in my gmail and facebook account and when restarted my system and opened facebook and gmail ,i found that i was logged in.This is when i have unchecked ''''''password remember'''''' option and '''keep me logged in''' option .How to solve it ?

    * [[/questions/876494]]
    You can set the pref <b>browser.sessionstore.privacy_level</b> to 2 (never) or 1 (non-HTTPS, default in Firefox 3 versions) on the <b>about:config</b> page to disable saving cookies via session restore.
    You can change the browser.sessionstore.privacy_level_deferred pref that is used when you do not reopen the previous session automatically via "Show my windows and tabs from last time".
    * http://kb.mozillazine.org/browser.sessionstore.privacy_level

  • Rescue and Recovery tries to auto backup even when schedule backup is disabled

    I have a Thinkpad T61 7662CTO with Vista Business (no SP) and Thinkvantage RR 4.2 with all the latest Lenovo and Windows updates installed.
    My Goal is to NOT have RR automatically backup but for me to do so manually. However I can't get it to do this.
    I tried the settings: I go RR app, click "Change schedule...", and under Schedule I have Frequency set to Never. However, my system has continiously continued to attempt a backup over and over every time it boots.
    Can someone tell me how to fix this problem? Why does RR ignore its own settings?
    Thanks Tom

    I recently Reinstalled R and R 4.50. Same bug as i noted.  The entry in the  windows task scheduler is INCORRECT.
    For those backing up to a 2nd hard drive, use my Solution.  The initial BASE backup will go to the correct
    backup location.  Subsequent Incrementals use the Task scheduler to kick off the backup .. I do not know what
    the parmeter is to point to a USB drive.  Location = S is the correct parmeter to back up to a 2nd hard drive. 
    Control Panel>Administrative tools>task scheduler>tvt folder
    Entry "LaunchRnR" select this entry.  Right click this entry. Properties.  Choose the Actions tab. Then EDIT.
    You will see ADD arguments(optional);  entry block will contain
    BACKUP location=L name=Scheduled scheduled
    Change location=L to location=S.  Click OK.  Next run should go to 2nd hard drive. Major Flaw!
    ===
    During Initial 1st time run of R&R, it will ask. you have NOT taken a backup, back up now?  Reply NO.
    If you reply YES, it will go to your C drive, since you have not changed your backup location.
    If you replied YES, you have a base backup on your C drive.  If this happens, Delete the base back up.
    Go to set schedule parm, choose time and day, and location 2nd drive.  It will then ask do you want to back up.
    Reply YES, IT will go to the 2nd hard drive.  THEN the bug shows up when incrementals start.
     Change windows task scheduler as noted above.  

  • Downloads such as adobe flash update won't download even when anti virus is disabled. The download box appears and runs but doesn't show anything.

    Any updates or downloads won't download in Firefox. The download box appears, goes thru the motions but doesn't park anything in the file. I usually have to quite Mozilla, use Explorer for the download, such as Go to Meeting, or Adobe updates. Can't download anything with Firefox from your browser.

    I am having the same issue -- IE7, XP SP3... Flash Player
    will not download or install, but will download and install for
    Netscape. Must be an IE7 issue, but I can't find a solution. If you
    find something out, it would be freat!
    ([email protected])

  • Caching on detailed navigation besides navigation cache?

    Hello Everyone,
    We use Btexx EasyWCM as a content management system on our SAP NW portal.
    When we create a new page in the portal it should appear directly in the detailed navigation, but instead it appears much much later, often after more then an hour. The same happens when deleting a page.
    We thought of navigation cache at first but we disabled it and the problem was still there.
    Because the new page does appear after a while, what makes it time-based, we still think it might be a caching issue. We don't know what other caches influence the detailed navigation.
    The page does appear in the PCD (role) directly after it is made, same goes for deletion.
    We tried a restart already, but that didn't resolve anything. And I donu2019t think it's a network problem because the PCD updates instantly. Just the detailed navigation doesn't. Even when we changed the customised detailed navigation back to the standard SAP detailed navigation there was no difference.
    We tried creating a page directly on the server so the caches of the proxy's etc could be excluded and the problem was still there.
    Thanks.

    Hello Sander,
    that's good to hear. But you do not need not turn the navigation cache off.
    easyWCM supports the new Navigation Cache API. If a editor changes navigation structures, easyWCM automatically invalidates the relevant roles from the cache.
    Please check if your SAP Portal release and easyWCM release supports that feature.
    More information are available on our support plattform:
    http://www.btexx.de/support/
    Best regards,
    Michael

  • I have an Ipod classic 30 GB U2 , it s been working fine for the past 3-4 years until now it starts to get stuck when navigating the menu or even when clicking something,Basically i am only able to use it as a storage device not its ipod features

    It is recognized via Itunes as IPOD and i am able to connect it through USB cable to the pc and manage its physical memory via My Computer. But the problem is I cannot use anything on it as an IPOD (Like Music video and note stuff inside it).It boots as saying its got low battery power and after a while "Do not disconnect" logo appears after it is charged, i am able to operate it as normal ipod but when i click something it gets hanged like a PC and it stays there until the battery is too low . No matter what button i press (Menu or play buttons) continuously or the combination to restart or reset its in the same static state,,no reaction...even when i connect it to the pc via USB or charger nothing happens ..it stays in the same screen whereever i navigated last. After all its power is used up the same process continues that i can use it as an external hard disk namely its 20 GB memory...
    Is there any way I can solve this problem via Itunes restore or any other used method to restore it to factory settings ?? ...I haven't used any method to restore it until now as i have migrated to IPAD,,,since then i've been using this as an external hard disk....may be if its restored to old condition i can carry this where ever i want unlike the massive IPAD...its like carrying a solar panel unlike an handy IPOD

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Real Player downloads videos from page I'm not even viewing, and "download this video" appears when navigating pages that a video isn't even on page.

    when I try to downlad a video, even when I right click and "download with Real Player" real player refuses to download THAT video if I have any other pages open...
    really frustrating to be forced to close pages to download a video on a page, when that is the one page I no longer want to view, I have already viewed it, and want to download and navigate away.

    Install realplayer again worked for me,hope this helps.

  • Trace user  on EP6 when navigating within Portal

    Hi Team,
    We have migrated from EP5 to EP6 sp2.
    Our users that are working via the Metaframe XP are experiencing problems when navigating within Portal.
    eg. If the user selects ESS, the screen returns back to the same screen. It was working fine on EP5.
    Users that do not use the Metaframe are working fine on EP6.
    I need to trace the user activity from the time the user
    signs onto Portal and signoff.
    I tried looking at trace files on the OS level and i also
    enabled the HTTP tracing, but had very little joy.
    I suspect it might be a Browser cookie problem.
    Could someone help with this problem.
    Points will be rewarded !!
    Kind Regards,
    Morgan Moodley

    A couple of things you could try
    1) Try clearing the browser cache, as there may still be files hanging around from the EP5 system that the EP6 system doesn't like.
    As for tracing the user activity, you could use a browser sniffing tool and simulate what the user is doing. I personally use HttpWatch, which sits in the IE browser as an icon in the top toolbar. When activated this will detail all requests and responses to and from the browser. I am not too sure how much this information will help with trying to identify the problem, but it could be a start.
    It might also be worth trying to use Firefox and looking in the Javascript console to see if there are any javascript errors
    I hope this helps a little
    Darrell

Maybe you are looking for