Need a program name for a Batchjob

Hi Folks,
In our current process, the deliveries are taken from picking duelist (VL06O)and the transfer order is created manually. Now we want to automate this process. I know that it can be done by a batch job.
Could some one tell me the program that should be used in the batch job which takes the delivery numbers from picking duelist and creates transfer orders?
Points rewarded.
Regards,
Krishna

I think you don't have to worry about program names. Just click <...in the background> button above selection screen and the system will create automatically a job for you

Similar Messages

  • Driver program name for script j_1i_57f4 challan

    hi .... plz i needed driver program name for delivery challan script : J_1I_57F4 . i tried to find it but since the output is displayed only from sp02 im unable to get its driver program name . i have to add certain fields in that form and corresponding logic in that form .
    thanks and regards .

    hi
    If u check the TNAPR table u will get the Driver Program as J_1I57FPN  , allu have to do is to Activate the SAP SCRIPT DEBUGGGER   and check the values  and also in the driver program above and check whihc values are coming and not.
    surya

  • Fetch Report Program names for a given Package

    Hi,
       I need to fetch all the report program names for a given pakage. I tired TADIR table but couldnt fetch report details alone..
    thanks,
    sri
    Moderator message: very basic, please do more own research before asking, e.g. look at a few TADIR entries of different object types, also discover the repository information system.
    Edited by: Thomas Zloch on Feb 23, 2011 2:56 PM

    Dan is right to be cautious, i've seen this cause problems.
    It's not very difficult to make the chnages in BCS, and if you have a lot of them/frequent changes, you can always use create an upload method
    and then make all future changes by .txt file

  • Wats d in-built print PROGRAM name for layout MEDRUCK???

    wats d in-built print PROGRAM name for layout MEDRUCK??? and can we change it??
    wat shud we do if we want2 change it??
    i mean...assume we got a scenario in which we need ta use MEDRUCK layout n print progrm n change some text in it.. and d address  and header in it..
    how cud we do dis??

    Hi ,
    The print program name for 'MEDRUCK' is <b>SAPFM06P</b>, it is not advisable to change the print program instead if you want to do any changes use Subroutines in the layout. Eg : PERFORM <Subroutine name> in PROGRAM <pname> USING <in_variables>
                   CHANGING <out_var>
    ENDPERFORM.
    Srini

  • Print program name for the dunning form F150_FR_DUNN_01 in sapscript

    Hi,
          I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
    Kindly help me.
    Thanking you.
    Pujarini Patra

    Hi,
    Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
    and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP  0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
    The corresponding SAP sample Forms are:
    - F150_DUNN_SF for Smartform; and
    - F150_DUNN_SF for pdf Form (don't let the name confuse you )
    I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that  myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
    There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
    - FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
    - FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
    So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
    As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
    The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd  try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for  view Cluster VC_T047_F... That would save the whole effort to try to detect the type for  form assigned...
    Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
    The selected entry is the one you are looking for to assing your custom forms, I believe.
    cheers
    Janis

  • Script and program name for MM:OUTWARD CHELLAN

    Hi all ,
    can any one give me the script name and program name  for MM:OUTWARD CHELLAN.
    Regards,
    Arun.j

    Hi
    There are Std Scripts for PO,RFQ,CONTRACT, GRN , GI Note etc in MM
    What is this Outward challan? what is its' equivalent SAP business document?
    Check in The Tcode NACE for the relavent one, for the Output applications like MR,MD,EF,ME etc
    Reward points for useful Answers
    Regards
    Anji

  • Standard program name for PO smartform in Ecc 6.0 onwards

    Hi,
    Could anyone please help me to know the program name for PO smartform in ECC 6.0 version onwards.i know about /SMB40/FM06P but this program is not there in Ecc 6.0.
    Plesea help me.
    Thanks,
    Sandeep.

    Hi Sandeep,
    The Driver program for the SapScript MEDRUCK is SAPFM06P.
    Thanks,
    Anon

  • I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!

    I NEED THE TABLE NAME FOR THE  FIELD DESCRIPTION GIVEN!
    Partner Type
    Partner Type Desc
    Partner no
    Partner Name
    Partner Address 1
    Partner Address 2
    Partner Address 3
    Partner Address 4

    Hi Jyotirmoy ,
                        You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
    Sirish

  • Do we need unique program ids for different SAP Channels

    Hi All,
    I am using different channels for receiving SalesOrder and Invoice idocs from SAP system. Wanted to confirm if we need unique program ids for each SAP channel or a single program id can be configured in SAP GUI to receive both idocs. I am using SOA 11g.
    Regards
    Subhankar

    Unique program id for each type of IDOC is preferred per each channel
    IDOC Type 1->Programid1->Channel1
    IDOC Type 2->Programid2->Channel2
    Manoj

  • Find the program which retrive the program name for 2 years.

    Hi Team,
    i have requirement like , i am working on BRITVIC Client , they want to me write a program which has retrive the all development Z program name for last 2 years.
    could you please suggest me the standard program which has retrived all program name for last 2 years.
    Thanks in Advance.
    puneet.

    Hi,
    go to table EUDB - Development Environment Objects
    see the program name NAME as putting Z*
    where DATUM is the creation date
    ZEIT is the creation time
    also you can go for table REPOSRC - Report Source Code
    Arunima
    Edited by: Arunima Rudra on Nov 18, 2008 3:44 PM

  • Standard Program Name for updating the System-Variables everyday in BACKGRO

    Hi All,
    Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?

    Hello matt,
    I have a program with variant.
    This VARIANT input values will store in TVARVC table every day night background job.
    i want the program name

  • Program name for smartform

    i hav made a smartfomr and a driver program for it
    but now i forgot the program name for it
    can some body plz help me to find it out
    i hav cheked table tnapr
    but did not get anything as it is not showing my z table
    plz help

    Hi
    If in your Driver program, you are using SSF_FUNCTION_MODULE_NAME .
    Scan the Z program using Report RPR_ABAP_SOURCE_SCAN
    with Programs as Z* and Name of your Smrrtform against String .
    This may take some time .
    You will get the List of Programs where your Smartform is called .
    Check from this programs, which one is your requirement .
    It may happen that u get only one program .
    Hope this Helps .
    Praveen
    Message was edited by:
            praveen parasiya
    Message was edited by:
            praveen parasiya

  • Program name for Transaction code

    Hi All,
    Is there an other table for program name for a given transaction code other than TSTC? I am asking this question beacuse for TCODE MM01, program name in TSTC is given as SAPMMG01, where as if you goto MM01->System->Status->Program it is giving as SAPLMGMM.
    Regards,
    Prashant.

    Hi All,
    I want the table name for TCODE other than TSTC.
    Regards,
    Prashant.

  • Program name for E-mail processing routines for o/p type NEU

    Hi Friends ,
    What is the program name for E-mail processing routines for o/p type NEU for purchase order . This i want use this for send PO for vendor .
    RB

    Hi
    Program SAPFM06P
    Form Routine ENTRY_NEU
    Form MEDRUCK
    Transmission  Medium - External Send

  • Program name for LSMW

    How to findout the program name for LSMW, in se38, and how to do the custom coding in LSMW?
    Moderator message : Search for available information, read forum rules before posting.  Thread locked.
    Edited by: Vinod Kumar on Jul 21, 2011 3:19 PM

    Check if the below give thread can help you in getting the information you are looking for.
    In which table are LSMW Project details stored
    Thanks,
    K.Kiran.

Maybe you are looking for

  • Bluetooth not working after upgrading to Maverick

    Hello All! I upgraded my Mac Pro system (NOTE: This is NOT the Mac Pro "Book" laptop, this is the Mac Pro tower system.) to Mavericks yesterday and now my iPhone (Verizon 4 model) won't connect via Bluetooth. It asks me for the pairing code number, w

  • Video specs for play on I pad Iphone

    I have a friend who has some swf videos, they will not play on I pad or I phone. What do they need to be converted to so they can render on IP and IPh? rd

  • Mass Re-Pricing of Billing Document

    For certain Billing Types we price at billing doc creation.  In the case of pricing errors the affected billing documents must be re-priced. Is there a mass update program that will allow us to re-price a group of billing documents without having to

  • Sending nested structure in PostLVUserEvent

    Hi All, I getting an exception when calling a c++ dll which has PostLVUserEvent to trigger the LabVIEW event structure. This dll has typedef stuct as described below (nested structure type), the same data structure is sent using PostLVUserEvent to th

  • Updating documents in pages

    Hi there. I have typed a document in pages on my iPad and manged to dowload it my iMac at work after syncing but then, I went back to my original document and made some modifications and when I synced again, all that's apearing is the original docume