Need advice on Webserver Clustering Deployment Scenario

Hi guys,
lets said I have a scenario here.
- 2 webservers with reverse proxy to 2 backend appservers.
- Mutual SSL authentication done at the 2 webservers.
- No static or dynamic content to be serve at webserver layer.
Should I configure a cluster webserver deployment here?
I have read the doc but didn't find the answer to the below situation:
- When HTTPS request unable to reach webserver #1 (down), will the webserver cluster auto-route the traffic to webserver #2.
Also from the doc, I find that webserver session replication benefits those who have java app on the webservers.
Not sure will it benefit the above scenario where there are no dynamic content on the webservers.
Thanks in advance.

Hi Sriram,
Thanks for the reply.
So far, I had no problem with the reverse proxy configuration.
This is really a good builtin feature of SJSWS that helps to forward traffic to backend without installing addition plugin.
Right now, my setup is 2 standalone webservers (maintain separate; yet same configs, same truststore, same SSL cert).
These 2 standalone webservers will reverse proxy all the HTTPS request to the backend appservers.
Failover support for appservers are done by pointing to a virtual hostname on a hardware loadbalancer (using RRP) which will redirect to the appserver cluster.
The portion that I had in doubt; is in a SJSWS cluster will there be a failover support for the reverse-proxy webservers?
E.g. If a HTTPS request came into the SJSWS cluster, and 1 rrp webserver happened to be down.
Will the cluster route the traffic to another rrp webserver?
And what happens if it it is in the midst of processing a HTTPS request that the rrp webserver is down?
I understand the session replication happened only after processing a request.
Not sure if session replication is applicable to my scenario since my setup only forward traffic to backend.
Lastly, I have only 2 physical rrp webservers which means 1 needs to be install with the admin server.
I presume that the other rrp webserver will still serve request even if the other rrp webserver with admin server installed is down?
Sorry for the lengthy post, I do have quite a no. of things going through my mind now.
Thanks once again to you and all the other helpful guys in this forum.

Similar Messages

  • JMS to Synchronous Web Service Scenario (Need Advice to use BPM or Not)

    Hi Experts,
    We have a scenario where we fetch data from JMS Sender and Send it to MDM Webservices.
    We want to have the files processed in such a way that until we get a response from webservice back that it was sucessful ,then only we need to process the next file.
    We would need advice as can we use BPM for this.
    We are thinking of having BPM like this:
    RecieveStep(Asyn)-SynchronousSend Step(with wait)-Stop
    The problem with this is when processing huge files the processing time of the Queue is taking very long and sometimes we are getting SYSFAIL.
    Please would anyone advice as how can we approach this scenario either using BPM or without.
    Also Can we use multiple queues or multpile instances concept for this scenario.
    Please Advice.
    Thanks in Advance
    Regards
    J

    Hi Prateek,
    Thank you very much for your quick reply.
    The response from Webservice does not need to be sent anywhere.
    We just want that after recieving the response back from webservice(SOAP) then only we need to process the next file.
    Can we control something from Sender JMS adapter side as well as it is picking up all the files and all files wait at BPE until each one gets processed.
    Is this possible without BPM or with BPM.
    Please advice as what wud be possible steps inorder to achive it through BPM or Without BPM.
    Thanks and Regards,
    J

  • Need advice for deploy adf web fusion application created in Jdev11gTp4

    hello,
    need advice for deploy adf web fusion application created in Jdev11gTp4
    and it will be nice if you have helper sites
    thanks
    greenApple

    Is there something specific in TP4 that you want to use TP4 - as John suggests, it might be an idea to use the full production release (11g). As for resources for information you can check out
    [Jdev Home|http://otn.oracle.com/products/jdev] this page contains links to the developers guides and various how tos etc etc. The follownig page is also useful and is focused more to those who are less familiar with Java
    [JDev for Forms|http://otn.oracle.com/formsdesignerj2ee]
    Hope this helps and maybe if you can be more specific we can better guide you.
    Regards
    Grant

  • Configuring A Deployment Scenario Using Service Operations?

    We imported a WSDL file from a vendor u2013 it defines a dozen or so messages.  So I created a Service Interface with several operations:
    u2022     JobService.CreateJob
    u2022     JobService.CancelJob
    u2022     JobService.ChangeJob
    u2022     Etcu2026
    During design time, the operation mappings are easy to use.  The operation mappings use the interface operations u2013 for example one an IDOC to JobService.CreateJob.  However, deploying a scenario to use service operations is apparently a bit more difficult.
    My receiver system has several SOAP receiver communication channels u2013 each receiver channel specifies a unique SOAP action & corresponds naturally to a service operation.  Therefore I need I need a receiver agreement that looks at BOTH the service interface AND the service operation so that I can bind it to the correct communication channel.
    In the Integration Directory, the Interface Determination step only allows you to select an interface, but doesnu2019t provide the ability to specify a Service Operation.  You have the same situation in the Receiver Agreement u2013 you can name the interface, but not select a specific Service Operation.
    So how do you configure a deployment scenario to take advantage of service operations?

    alternate way could be as follows.
    One Receiver determination
    One Interface determination with condition for derive OM and Interface
    One Sender agrmnt
    Multiple Receiver Agrmnt
    Multiple CC

  • Multi site deployment scenario

    We are in the process of rolling out Lync voice in a secondary Site. The main Site already uses Lync Voice.
    Our partner discussed several deployment scenarios which to me sound over-complicated and not allowing me to have the same functionality as the main site. I'm having doubts if I'm getting the full picture here. We talked about SBA/SBR, but the downside of
    these is no Response Groups, which rules them out for us.
    The other option was to install a new full Lync server/pool and Edge in the 2nd Site. But when I asked how external users are properly redirected to Edge-A or Edge-B, the answer didn't came. I would need to use new SIP addresses in SiteB probably,
    but I really don't wanna do that.
    Also, they claimed a new Lync server/pool should also be installed in a new AD domain, instead of in the current domain which already holds the pool from SiteA (AD domain is the same in A and B by the way).
    A new AD domain just for Lync ? I was thinking, this can't be right. Exchange allows me to have mutiple servers in multiple sites in the same domain, why can't Lync do the same ?
    So the only option that remains (according to the partner) is adding the users in SiteB to the current pool in SiteA. And having no new servers/pool at all. We would only have to install media-gateways in SiteB to get ISDN lines or SIP trunk in for the local
    PSTN. But this scenario to me sounds nice only for small offices. What if my VPN from SiteA to B is down ? It's too risky.
    Any comments are much appreciated.

    Hello,
    First, it seems that your partner doesn't really know Lync and I advise you to change... Even more if you have voice and multiple sites.
    1. SBA/SBS is an option but yes no redondancy on RGS and advanced Lync Feature
    2. Add another Lync pool is the option to have full Lync capability localy. After you can add Failover options with Pool Pairing as Richard told you.
    3. No need to add another sip domain or another AD/Forest for a new Lync Pool, you can just add as many pool you want on one AD/Forest. Just Lol..
    4. For the Edge, you can either share one Edge Pool for both sites (it's not mandatory to add another Edge pool) or create another Edge pool on the other site even with same SIP domain, the first connexion will go through one but after the media will go
    through the one attached to the site/according the configuration you made.
    5. Only Media GW is just totally crazy (or you take the risk with WAN redondancy or other stuff).. A least look for point 1 or 2 but you come back to your first point...

  • Need advice about certification: do J2SE 1.4 or wait for 1.5 to go out?

    I need advice here! I am studing for Java Programmer certification (310-035) and I know now that the certification does not have any expiration date, instead it's version based. So, if I get now a J2SE 1.4 certification, soon it will be outdated... I guess!
    Does anyone know or have any ideia of WHEN java 1.5 sdk will be avaliable, and anyone can tell me how long it will take for a new 1.5 programmer certification be avaliable for general public?

    Do both. 1.5 is far enough away that you do not want to wait for it.
    And besides, 1.5 has enough new stuff in it that you'll want to recertify anyway.

  • Need advice on on a Mac Pro 1,1 Media Center

    I currently have a 2009 Mac Mini running as my home media center, but I recently came by a FREE Mac Pro 1,1 and have decided to repurpose it as my media center so I can migrate my Mac Mini to my bedroom TV where it will live an easy life doing nothing but run Plex Home Theater, Netflix, and EyeTV. This machine falling into my lap was also quite timely because my 4-bay Drobo is running low on available expansion and another Drobo isn't in the budget at the moment.
    This vintage mac pro is running Lion 10.7.5, has 1 old and crusty 500GB hardrive, dual x5160 processors, 4GB RAM (one stick i'm pretty sure is toast judging by the red light and the kernel panics), and the standard NVIDIA GeForce 7300 GT 256MB graphics card. It will be used primarily for the following: network storage for iphoto and itunes libraries, streaming video, Plex Media Server & Plex Home Theater, and Handbrake encoding. I also have a goal of safety of data for my movies, photos and music as this machine will supplement my current Drobo storage.
    My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
    Here is where I need advice because I am not very familiar with RAID and the differences between hardware or software raid. Am I better off getting four drives of the same size and setting them up as RAID 5 (I think) using Apple's RAID utility or should I throw in three 1TB drives and then install a fourth 3TB or 4TB drive as a Time Machine backup for the other three?
    Should I upgrade the OSX to the technically unsupported latest version? Or is it not worth the trouble for this application?
    Also, is there any benefit to upgrading the graphics card to the ATI Radeon 5770? Would this yield an improved image quality? I am outputting to a Denon AV Reciever and subsequently to a 100" projection screen, if that makes a difference. I also noticed the 5770 has an HDMI port, wich would be nice, but not necessary since I can use a DVI converter and woud still need to use the optical audio out anyway.
    Much obliged for any input

    My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
    PCIe cards that use or support SSD are not bootable until you get to 2008 (and that is limited too).
    Green are not suited for any form of array unless say NAS and WD RED.  Better option would be 3 x 2TB WD Blacks in a mirror, and too many people only use two drives, well 3 is much easier safer and works better. Might want to invest in www.SoftRAID.com product even.
    Best price and quality, got my 1,1 with 8 x 2GB (ideal is 4 or 8 DIMMs)
    2x2GB FBDIMM DDR2 667MHz @ $25
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    With price of 250GB SSD $155 I'd go with that or stick with $89 for 128GB .

  • Need advice on video software.

    Need advice on video software.
    I currently use adobe elements 3 and have done so for a few years now with no problems. my os is XP and my system is a couple of years old, but we do have a brand new win7 machine in the house.
    I am currently look at Cyberlink PowerDirector 8 Ultra OR Adobe Premiere Elements 8. Reviews for both softwares seem very good BUT, when I dig deeper into user reviews instead of editor reviews do I find problems.
    Major problems with program crashing all over the place, at start up etc, and it is still not getting along with any win7 machine? Major problems with drivers. Honestly, I do not want to have to jump through dozens of hoops to get any software to run. After I pay for it, it should run, period.
    Has anyone else here used both softwares and can you give an honest opinion of each?
    I am also asking these same questions on the cyberlink site.
    I would like to upgrade my video software to take advantage of the new features that are coming out but I really don't want a big headache trying to run one or the other. To be fair, when I bought adobe elements 3 I had also bought pinnacle, which has gathered dust since my first week with it, which is why elements was purchased. That was money wasted and I do not wish to repeat this. I would like to go with Premiere Elements 8 but remain very unsure.

    If your newer machine is Win7 64-bit, it might be worth waiting for SP-1 to be issued, and then hope that 64-bit drivers are fully included. The 64-bit drivers now seem t be an issue at this point, and that will affect any NLE program.
    Also, and regardless of which particular program you choose, optimizing your computer, the OS, the hardware, and the resources management, will go a very long way to insuring success. Few programs can tax a computer, as an NLE can - any NLE. Video and Audio editing will stress your system, like almost nothing else can, except for heavy-duty CAD, or 3D work, though those are usually done only on specialized, optimized computers, designed just for those applications.
    Not the specific advice that you seek, but it's the best that I can do.
    Good luck,
    Hunt

  • I need advice:  I love my apple TV.  But my laptop at home, only has a 750gig hard drive.  Is there a possibility of having all my media on an external hardrive to still connect to the Apple TV?

    I need advice:  I love my apple TV.  But my laptop at home, only has a 750gig hard drive.  Is there a possibility of having all my media on an external hardrive to still connect to the Apple TV?
    Is there like in a hard drive of which iTunes can read the media, which will not require me to add and delete media onto iTunes, because of a lack of space on my laptop?

    just get an ext HD, and point your itunes library to that drive so now you'll just keep all your media on this ext

  • Major Issues with installing 4tb internal. Really need advice please

    In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
    Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
    The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
    Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
    Any info would be greatly appreciated...
    Deskstar 4tb internal info which is installed in Bay 2
    3tb Seagate which I trying to retire and transfer from.
    Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
    (Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

    What OSX version?
    Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
    http://forums.macrumors.com/showthread.php?t=1661024
    http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

  • I'm desperately needing advice to a common question.  I use Quicken and love it.  But the Mac version is not as great as the PC.   Has anyone installed it by segmenting their Mac with Parallels or Fusion or Boot camp.  If so, which one do you recommend.

    I'm desperately needing advice.  New Mac.   Used Quicken on my PC.  Researched all software for Financial programs and Quicken is still the most recommended.   I want to use Quicken on my Mac.  The Mac version is not highly rated so I would need to partition my Mac.   Has anyone done this for their quicken program and if so, which partitioning program did you use - Parallels, Fusion ware or Boot camp?
    Thx

    Lisa Ellies-Laye wrote:
    Thanks.  Hadn't heard of it. ?  Is there any concern installing this free program on my Mac.    Have you used it?  Apart from being free is there any other advantage of Parallels and VMfusion. ?
    Virtual Box is safe and well developed, it offers similar or identical features to the paid competition, it may be a little less polished but that's all.
    Download and try it out, nothing to lose (except time).

  • TV monitor display project, need advice.

    So I will be starting a project soon for my job. It will require some content for a store lobby TV display screen. Basically I will be making some content, whether it be scrolling images, animations, or maybe a video clip playing automatically. I will have maybe all of these things to be played throughout the day in the lobby of my work for customers to be viewing. This is the first time I have taken on a project such as this and I'm not sure where to start. I need advice on what type of information I need in order to begin this such as what size to start my project as, format, etc. Thanks!

    Hi,
    You have two options:
    1. Create the Edge Animation on the Computer, and play the animation and use some screen capture software that will give you a video. This video you can play on your lobby TV  in loop.
    2. If the lobby TV is a smart tv (i.e. it has browser to navigate the webpage), then you can host the Edge animation content files on some server, and navigate to the server url, which will play the animation on the browser in the TV.
    hth,
    Vivekuma

  • Why we need to go for clusters ?

    Hi ,
        Plz clarify me y we need to go for clusters in ABAP-HR programming ?...
    Thanks in advance..
    Suresh..

    Because, that is where the ( Time & Payroll)  Transactional Data is stored.. For Reporting off the Master Data tables you can use the PAnnnn & HRPnnnn Tables with the relevant Authority checks.. PL go through the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d528ff575e11d189270000e8322f96/frameset.htm">SAP Help</a> for additional info on HR Clusters.
    ~Suresh

  • Simple Question, need advice. BOBJ vs. BI

    I didn't know where to post this, but I need advice.
    I have been working as a SAP BI Developer for past 2 years. I have an opportunity to transition into BOBJ (means I will not be in BI team).
    Wanted to know if this is a good career move, but have few questions.
    1) Which is easier BOBJ or BI?
    2) Which is more in demand and will be for next 10 years?
    3) I've heard that there's a very high chance to work from home as a BOBJ Developer compared to BI Developer? True/False?
    4) Is pay for either the same?
    Thanks in advance.

    "Having extra cores will be a distinct advantage..." ?
    Better optimized to take advantage or to handle the scheduling of threads?
    Right now, it is a mixed bag and give applications a year to be recompiled and optimized - or longer. The transition to Leopard also has taken more than a year to get where it is.
    I would not discount last year's 2.8GHz 8-core as a better buy and value.
    http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
    Why 10.5.7 now runs better
    http://www.hardmac.com/news/2009/05/15/did-mac-os-x-10-5-7-modify-management-of- multithreaded-tasks

  • Doc Project with format confusion- need advice

    I have a documentary project with a plethora of footage formats because the doc spans a long length of time and different project collaborators. We just shot more footage and I don't want to move forward converting the new footage until I know the best path to take form here on out. please advise.
    Here is the info.
    Below i'm listing the descritption of footage, the format, and the % I'm predicting it will be used in the final edit of the documentary I'm working on.
    Archival Footage: DV NTSC 720x480 (10%)
    Original footage shot: DV NTSC 720x480 anamorphic (40%)
    Additional Footage shot in Summer 2010 with Panasonic HVX200: DVCPRO HD 720p60 29.97 (35% shared with canon 7D footage listed below)
    Additional Footage shot in Summer 2010 with Canon 7D: shot 1920x1080 23.98 Apple Pro Res 422, pixel aspect square. I converted this footage to 720p60 29.97 to match the Panasonic footage but I still have the original files saved. (35% shared with hvx200 footage listed above)
    New Footage shot with Canon 7D: 1920x1080 23.98 Apple Pro Res 422, pixel aspect square (15%)
    Timelines:
    - I edit the SD footage in timelines with SD sequence settings matching the format of the footage
    - I edit the HD footage in timelines with DVCPRO HD sequence settings matching the format of the footage
    - when footage of both formats ends up in one 'scene' the timeline is DV NTSC 720x480
    - when I output a rough cut, I nested sequences and output DV NTSC 720x480
    I have not converted the new footage yet and before I do convert it and then transform continue editing, I feel I need to re-evauluate how I'm approaching the multi-format situation.  I need advice about the best path to take from here on out. WHAT WOULD YOU DO?
    Should I upconvert the SD footage and do everything HD from now on? The final cut will probably be 50% SD and 50% HD with possibly more HD than SD.
    If I do upconvert and go HD, is 720p60 29.97 the best format for me to use considering my footage sources? If you have any ideas, please also explain how you might go about carrying them out.
    Thank you!

    krgarty wrote:
    Exactly, whic is why I'm seeking advice. the final delivery will be film festival screenings and hopefully broadcast, and considering the channels today that = HD.
    That's not a final decision at all, that's a series of delivery options. You must produce your project in the highest resolution for which you have space, codecs and techniucal competency.You will save that as the "final" but I'd not call it that since nothing is ever finalized. Jsut keep naming the versions. Then you will open the full rez version and use any of several conversion or compresiona apps to satisfy all other distribution needs.
    The omst flexible will be a 1080/60 format but that decision will cost you tons of conversion time, lots of space, and will require many stylistic decisions along the way.
    That's what I would do but I'm not you and I'm not your client. 

Maybe you are looking for