Need assistance with multiple issues with several G5's

Hello All,
I need to get some assistance with some issues that I am having with several G5 Dual’s
I just started a new position and I have 4-G5 Dual’s that are in various states of disrepair. Normally I would call Apple support but they did not purchase the extended AppleCare packages for any of the G5’s theu purchased and they are ALL over a year old now. Any suggestions would be greatly appreciated.
G5 number 1 - Has its fans running at full output all the time. Could this be a firmware issue?
G5 number 2 – Had it’s logic board replaced by one of our company computer techs and now at start up gives a long tone then boots to white screen with a command prompt. Requiring me to either type “mac-boot” or “shutdown”. If I continue the boot process the machine just goes to a gray screen and stalls. I researched this yesterday and tried several solutions I found here but to no avail. Seems to me that past of the issue is that it is stuck looking for a firmware upgrade. How do I get past it?
G5 number 3 – Mac seems to boot correctly but when you click on the Apple icon in the upper left hand corner the Finder blinks out and then comes back. It does this every time we try to go to the Apple menu. We removed the original hard drive and installed in a known good drive, our tech drive with a G5 image, rebooted the mac and the same issue occurs with the Finder.
G5 number 4 – This unit boots to black screen with a Unix command prompt displaying “root#”. Any thoughts.
Thanks
Paul
G5 Dual Mac OS X (10.3.9)
G5 Dual Mac OS X (10.3.9)

Apparantly someone not certified to repair them messed them up.
Tell bossman it would be in his best interest for you to take them to a authorized Apple Repair and get it done with.
Tell him that Mac's rarley screw up hardware wise and there really hasn't been a great demand for skilled repair techs outside of Apple.
If your worried about your job, tell him you can take care of the software, training, minor hardware and networking end of the matter. Which, luckily for you, are longtern and ongoing needs. You can tell him that.
There's nothing wrong in admitting you don't know how to do something and keeping your job, than to be unable to fix them and lose your job.

Similar Messages

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

After installing 2014.3 my site had multiple issues with Google Chrome

After installing 2014.3 my site had multiple issues with Google Chrome. After I rebuilt the home page in 2014.3 the site is still not well. With the old software the site worked well with all the browsers and loaded incredibly. Despite Adobe's claim of a faster load with the new software it is much slower and in Chrome at times it won't load up at all.
The home page had two "Video-Animation light box galleries" by Visual pictures company. One had 12 videos, the other 3 videos. All the videos were streamed from Vimeo. There was also an Edge Animate animation in the middle of the page imported as a .oam file. the rest of the page was nothing special except using some web fonts. Again, these elements worked together well before the update.
After the update everything loads slower in all browsers and in Chrome all types of weirdness happened. Videos would play randomly, all of the audio from all the videos played as the site loaded. Videos would play in the wrong place. Instead of my animation playing a video from the galleries played in it's place instead.
I rebuilt most of the home page using a new video gallery and that helped some what but when I placed the animation.oam file in the page had new issues. To survive, I've taken the Animation out which helped but the functionality is still far from being acceptable. My boss is un my backside, other work is not getting done the stress level is through the roof because I was the one who encouraged using all these new Adobe tools (which I'm paying for personally). Now you broke it with a new update. This is not the first time I've been caught out with problems with updates. I couldn't use SpeedGrade for months following an update. ADOBE MUST VET THEIR

Sorry,
It was slated to go to the Creative Cloud - Muse area. How it got to Photoshop is beyond me.
Bob

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

[svn] 931: Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name , it causes a ClassCastException in the server

Revision: 931
Author: [email protected]
Date: 2008-03-26 11:31:01 -0700 (Wed, 26 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - we need automated tests for this basic case.
Doc: No
Checkintests: Pass
Details: RequestFilter was not handling multiple headers with the same name properly.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.java

Hi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all!

[svn] 949: Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name , it causes a ClassCastException in the server

Revision: 949
Author: [email protected]
Date: 2008-03-27 07:12:59 -0700 (Thu, 27 Mar 2008)
Log Message:
Bug: BLZ-96 - When sending a HttpService request from ActionScript with multiple headers with the same name, it causes a ClassCastException in the server
QA: Yes - try again with legacy-collection true and false.
Doc: No
Checkintests: Pass
Details: Another try in fixing this bug. When legacy-collection is false, Actionscript Array on the client becomes Java Array on the server and my fix yesterday assumed this case. However, when legacy-collection is true, Actionscript Array becomes Java ArrayList on the server. So added code to handle this case.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-96
Modified Paths:
blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/proxy/RequestF ilter.java

Hi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all!

Would like assistance with multiple devices with multiple iTunes accounts syncing on one PC

I have had an iPhone for some years now and have been syncing with my PC without issue (first with iPhone 3gs and now with iPhone 4s). My wife bought me an iPad 3 retina in December 2012 which syncs with the same PC as my phone and shares the same iTunes account. Apps downloaded onto one device are automatically downloaded to the other, iMessages are sent and received to both devices also.
My Wife now has an iPad mini with retina (using her own existing iTunes account which she previously used for an iPhone she no longer uses). I synchronised her new iPad mini with my PC assuming iTunes would manage the device and related account and contents separately to my existing account and 2 devices. However this has caused an issue with the sharing of apps. Since doing so I have started seeing updates available on my devices for apps which I have never downloaded, but my wife has. If I tell my iPad to update said apps, I am asked for my Wife's iTunes account password.
On doing some searching via google I now understand that I should have created a second windows profile on my PC for my wife and installed iTunes onto this profile for the purposes of syncing her device.
I would very much like to do this, but would like some assistance on the best course of action for doing so. If I proceed and created a second profile and sync her device to this, I presume I would need to tell iTunes to treat her iPad as a new device (and wonder what would happen to her existing content)? Assuming we do this, I presume the issue of my seeing her app updates would still persist?
Could someone advise if they have any experience with similar issues/queries?

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Multiple Issues with iTunes on New iMac

Hello Apple Community,
I recently bought a 27" iMac with 3.1Ghz i5 processor running on Snow Leopard and finally set it up. I have owned many Macs in the past and currently have been using a 5 year old 15" MacBook Pro on Snow Leopard that has been running flawlessly but I needed something with a bit more processing power. When I first took my iMac out of the box I went ahead and used the Migration Assistant to move my applications and files over from my MacBook Pro but after multiple attempts I had to stop and simply move the music, document, and photo data on to a portable hard drive while I got the Migration Assistant to move the applications. I simply moved the old iTunes music folder over to my new iMac and replaced the iTunes folder on my iMac. The new iMac has already been authorized through my iTunes account and the music will play. Now here are my current issues.
When I play a song on iTunes, there appears to be a random amount of fade-in and/or crossfade when I switch playing songs. I have checked the playback preferences and crossfade is not checked. Some songs the crossfade will take a second while sometimes it will be as much as 10 seconds of crossfade. On my MacBook with the identical library and settings, it does not have these issues.
The other issue I have been experiencing is if iTunes has been open and my computer sits for a little while (usually after awaking from sleep or even listening to a few songs without touching the keyboard, the songs will stop playing on their own and when I press the play button, it begins to "play" the track but there is no sound coming from iTunes. I have checked the volume slider in iTunes and it is still at max volume while all other applications still work and output sound. iTunes will only work properly if I close it and re-open it.
The final issue is similar to the last one in that when I try and play previews in the iTunes Music store it will not play but when I hit the play button iTunes will then appear to be "playing" but no sound from either the store or any of my songs from the Library.
iTunes works perfectly fine on my MacBook Pro and it does have any of these issues. Both Macs are currently running iTunes 10.4.1. All songs in each library are checked and will play to a degree.
I have deleted iTunes and all corresponding library files, (basically anything with iTunes in the name) and tried to reinstall iTunes and used multiple methods to replace the music files including using Home Sharing, a portable Hard Drive, and dragging and dropping the music files from the shared folder and no matter what I try, I still cannot get iTunes on my iMac to work properly. I have been searching around the support forums for others who might have had this issue but I cannot seem to find much. Any help would be greatly appreciated!

I had not tried that before, but from your suggestion, I went ahead and did it and it seems to have gotten rid of the crossfade issues I was experiencing but whenever I try and listen to a preview in the iTunes music store it still does not appear to be working. Also, I was testing a number of tracks and it seems like there are a few tracks in particular that will make iTunes stop playing when I click on them and then if I attempt to play something else, iTunes says it is playing but no sound is coming from it.
What I have found that is interesting is the first time I ran the Disk Utility it repaired a HUGE number of misc. files. After running it and still experiencing problems I tried to run it again but this time the files were not as numerous and were all within the /Library/CoreServices menu. Each subsequent time I ran the Disk Utility and rebooted, I tried to run the Disk Utility again and the same files seem to still be having the same issues. This is just an example of one of the files I have been having an issue with.
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" .
One in particular gave me a Warning and said it could not be repaired. I'm not sure if it is important to repair but I still seem to be having some issues here and there. Here is the message from the Disk Utility regarding the file in question.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Multiple issues with my iPhone 3GS since 4.1; can anyone help?

Hi,
I have an iPhone 3GS 16GB which I love very much. Vital Statistics are:
Version: 4.1 (8B117)
Carrier: Voda AU 8.0
Model: MC132X
Modem Firmware: 05.14.02
I bought it through Vodafone Australia in January this year. It’s been brilliant, it is this device which convinced me Apple sold brilliant gear, and greatly influenced me to buy my iMac 27", 17" Macbook Pro, Airport Extreme, and Time Capsule.
I am a Senior Test Analyst with telco experience in all of Australia’s mobile phone operators (3, Vodafone, Optus, and Telstra). I now work for a global media company, and depend on my iPhone for phonecalls, emails, internet, getting access to my share trading platform, banking apps, calendar, etc.
I went to Germany for 2 months, and I bought the unlock from my carrier, Vodafone Australia, so I could use a usim from Vodafone DE in Germany. Vodafone’s instructions were that in order to apply the unlock, I had to connect my iPhone to iTunes, where it would download an update from Apple and unlock my phone.
I performed the upgrade to 4.1, which was a completely clean install after backing everything up.
Unfortunately, after upgrading from 3.1.3 to 4.1 I am having no end of issues with my trusty (once) 3GS.
Issues I am currently encountering:
1. Dropped calls. Both in Germany, and in Australia, my iPhone is dropping calls at a rate it has never, ever done before. 1 out of ever 2-3 calls is being dropped. The voice quality is also degraded over what I remember it being (both in AU and DE), and I’m getting ‘squawks’ and ‘screeches’ in the middle of my conversations which I never had prior to upgrading.
2. Signal strength is very poor. Before I upgraded to 4.1, I was able to make and receive phonecalls at my desk at work (right in the heart of Sydney’s CBD, right next to Hyde Park.) without issue. I was able to walk in between my company’s offices in the CBD and talk the whole way without problem. Now, I get 1 bar at my desk, and I’m lucky if I can make a phonecall 50% of the time there. I can no longer receive the volume of calls that I used to at my desk either. Walking between offices sees my phone calls drop EVERY TIME now. At home, with 3.1.3, I had no problem with reception. Now, I drop calls inside my house on a regular basis, and I often don’t have enough signal to make calls at home where prior I had no issues. My younger brother, who bought an iPhone 3GS on the same day I did, from the same Vodafone store, at the same time, is still on 3.1.2. He has no problems with reception in the house at all. He walks around taunting me holding phonecalls without issue.
3. Internet performance has been devastated. Whereas my google maps, email, and internet access used to be fast and crisp, now it is slow and haphazard. I am also seeing the 3G symbol disappear and be replaced by an E symbol, and my phone seems to have difficulty staying on the 3G network. My brother, standing right next to me, does not have these problems. Once again, my brother’s iPhone 3GS on 3.1.2 does not have any internet problems when he is using his iPhone right beside me. We are on the same carrier (Vodafone AU), on the same plan.
4. My iPhone battery life has been dramatically reduced. Whereas I used to be able to use it for almost a full day, with minor top ups when it got really busy, now my battery life vanishes before my eyes in half the time. This is with the device simply not being up to the task of performing the workload it used to!
5. My iphone locks up, and crashes at random times, and I’ve been having to hard-reset it on occasion.
6. My iPhone is far slower than it used to be. I’ve compared it to my brother’s identical 3GS on 3.1.2, and his phone flies in comparison to mine! Opening my SMS’s, email client, and internet browser is painfully slow.
7. When calling a number, often my iPhone ‘waits’ for 20-30 seconds at the ‘calling mobile’ screen before I hear any tone from the phone indicating that it’s making the phone call. This never happened when it was running 3.1.3. This never happens on my brother’s identical 3GS.
8. My wireless performance has decreased. I have run bandwidth tests through my wireless router numerous times from www.speedtest.net, and compared them with my brother’s results performed right before and right after mine. I’ve run this test against my brother’s 3GS more than enough times to form a statistical picture. On the whole, my wireless performance is around 10-15% worse than his 3GS.
I work in the telco industry. I regularly chat with the radio engineers who fix up blackspots in 3G coverage for Telstra and 3 Australia. I know that the excuse offered, that of the iPhone software correctly reporting the signal now and not before is absolute rubbish. My 3GS used to work at my desk, between my offices, and at home flawlessly. It crawls along now, and it does not get the reception signal quality it used to.
I have wiped my iPhone several times now. I have put it into DFU mode and totally, cleanly installed the 4.1 software. I have done this 4 times now.
The clean installs have not fixed the issues above.
I would like to know what my options are for fixing these issues?
The prime questions I have are:
1. How can I roll back this accursed update?
2. Why would Apple release a software update(s) that hasn't been tested, and dramatically negatively impacts my beloved 3GS?
3. How can I get my brilliant 3GS +*back to the way it was*+!?!?
I’m very, very disappointed. And to be honest, the simple fact I’m taking the time out of my busy day to write this post means I’m very angry as well.
I know the problem with my 3GS *is not a hardware issue*. It's a software issue, and I'd like to know how I can get my old, fast, reliable, brilliant 3GS back.
Regards,
-J

The picture you show is normal. If you lightly double tap home button it activates reach ability mode for one handed operation. Nothing is wrong there. Another light double tap returns it to full screen. Do not press, just light touch the home button. AAs far as the other issues check the in call volume or ringer volume as it happens, just a possibility. as far as the banner not displayed on lock screen, as far as I know you need to have notifications set to alerts not banners in order for them to show up on the lock screen.

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

Multiple issues with Safari

As of this morning my Safari appears to be performing faster, although not consistently; however, youtube will load but cannot view videos, news video will not load, and I cannot listen to the radio via my computer (no streamming). Any assistance is appreciated.

If you are having problems playing MPEG4 video in Quicktime 7.4 (and Apple are aware that some users have had such problems) you should carefully check in
/Library/Quicktime and
/Library/Internet Plug-ins and
Home/Library/Quicktime
to check whether you have any third party plug-ins that are not completely up to date.
Current versions of Flip4Mac and DiVX and Perian do NOT cause failure alone or in combination. However the one SPECIFIC extension that ALWAYS causes the failure alone or in groups is 3ivxMediaImp. All other 3ivx extensions DO work. Remove only that ONE SPECIFIC extension.
Please try this and see if it fixes your problem with QT Player, the QT Firefox Plugin, and iTunes not playing MPEG4 files (including mp4 files).
Older 3ivx and DivX components are often incompatible with new QuickTime versions and are, in many cases, obviated by component packs like Perian.
This is not the only explanation for issues with MPEG4 file playback in QuickTime 7.4 and later, however. The issue with some videos from YouTube, democracynow.org and others, for instance, is the result of that content not complying with MPEG4 standards (namely that they use bogus track dimensions). QuickTime had previously ignored invalid track dimensions but this was changed in order to support properly authored anamorphic content.
The recent update to QT 7.4.1 has fixed a number of issues but some problems are unavoidable when working with non-standards compliant content. The standards are important for many reasons including keeping hackers from manipulating improperly coded web pages.
However, there is a workaround (also the basis for why those files will still play in iTunes): there are a few ways to trick QuickTime into ignoring the invalid track data. For instance, rename the files .3GP and they'll show up just fine.
Post back if you want a list of the plug-ins you should have in order to play pretty much anything in Quicktime.

Issues with multiple Files with multiple subdbs on a single environment.

I'm having an issue with Berkeley DB 4.2 on 32-bit platforms, regarding multiple physical files with multiple subdatabases in a single database environment. Specifically, when I open a subdatabase for a physical file, Berkeley DB thinks that it is using the same subdatabase in a different physical file.
I'm doing the following:
1. Create and open a db enviornment.
2. Move file1 to the common area.
3. Open, get and close the subdatabases in file1.
4. Move file2 to the common area.
5. Open, get and close the subdatabases in file2.
6. remove file2 from the common area
7. Move file3 to the common area.
8. Open a subdatabase from file3. About 1/2 the time, the fetches
return data from file2, not from file3.
It's possible that at some earlier time (i.e. before step 1 of this
test case), file1, file2 and file3 were the same file. I noticed
that there is something called env->fileid_reset, but that is not
in 4.2.52.
Any ideas?

Looks like I've resolved the issue

Migration Assistant and permissions issues with new Mac Pro

Hi There,
I've not had any significant issues with Migration Assistant in the past but I can't create a reliable system with my new Mac Pro.
After using Migration Assistant during the initial setup, my user account wasn't even transferred. I tried restarting but in the end, I followed these instructions to reset and run the assitant again: http://stationinthemetro.com/2013/11/10/make-mavericks-re-run-the-setup-assistan t
I've just finished running it for a second time, and while the user account is now on my new system, there are so many permissions issues that the system is unusable (I can't even run Safari). Creative cloud, 1Password, safari, Dropbox are all apps that give me Disk i/o or permissions errors.
If I look in the user folder, many directories within it have a red minus icon. I've tried fixing permissions using Disk Utility but something is not right.
In the past, the new system just boots like the old one but this time round, it asked me to create an account after Migration Assistant had finished - is this normal? I used the same username and password as before but I'm not sure Migration Assistantis working properly.
Does anyone know a full-proof way of fixing and transferring my account without having to spend hours downloading OSX for a full erase and install?
Any help would be much appreciated.
Cheers
Ben

Thanks for the reply,
I didn't understand exactly what to put into AppleScript sorry (never used it before) - so I just ran the following from the Terminal:
$ echo $UID
$ sudo chown -R 503 ~
And restarted - everything works now - thanks heaps.
What had happened and is this something I did or did Migration Assistant just get confused?
I have 3 new Mc Pros to setup on Monday so just want to ensure those are hassle free.
Cheers
Ben

Multiple issues with Pavilion x2 11

I have just bought HP Pavilion 11-h003sa x2 PC in my local Currys store. It was a display model, so they gave me full insurance for 1 month for free. I'd like to know if with the following issues I should return it all together, or send it for replacement, or there are some ways to solve those issues.
1. Icons and windows shadowing.
If I have some windows open even for a few seconds, and then the screeen change to the plain one color, you can still see the shadows of the icons and windows that were open. The effect disappears when the screen change to black, or some moving graphics are displayed.
2. Sleep not working
After update to Windows 8.1 sleep function is not working. The screen turns off, but to turn it on again, you have to hold power for 10 sec. and then push it once again and whole system reboots. I'm using the most recent graphic drivers from your web page.
3. Bios update issue
I have updated the laptop with the most recent Bios from the HP webpage. It all worked smoothly, after reboot it started counting and then asked "[Flash Dock EC]? ". If I pick yes, it updates something with percents, when it finish, laptop reboots and asks again. If I pick no, it goes straight to system, if I pick yes, percents go again. I tried to put all Bios versions you have on your webpage since and it didn't fixed it. I tried to apply them both through Windows exe and through HP Built in recovery tool. Bios starts after this question, so it's not a Bios issue. The only way to not see it on start is to unplug screen from keyboard. It's quite annoying.
Please tell me if there is any fix for those issues, or should I just return the laptop, or should I get a new one, since otherwise it's a nice piece of equipment and I'd love to keep it.

Hello MikeGold, welcome to the HP Forums.
I see that you have a few issues with your notebook. I will try to help you with them.
Provided that you can still boot into your notebook (as you were having issues with the BIOS), make sure that all Windows updates have been completed. Then check to see if anything can be updated through the HP Support Assistant.
1. This could be an issue with the actual display or graphics driver. If this wasn't updated at all from above. Please start by making sure this has updated. You can do so by going to this link Intel High-Definition (HD) Graphics Driver. Also, make sure that the chipset driver's up to date: Intel Chipset Installation Utility and Driver.
To look into issues with the display, this may also help: Resolving Problems with Notebook Displays (steps can be done with Windows 8.1).
2. The previous updates may have already helped or corrected this issue. If it hasn't start by checking power management settings. Make sure that you're using the recommend setting. From there follow this document : Resolving Problems with Sleep and Hibernate Modes (Windows 8).
3. I have two documents for you in regards to this task: Updating the BIOS, will help you on how to up date the BIOS (if still having issues, I recommend contacting support for help with this). To restore the BIOS back (if you choose to not update): Restoring the BIOS.
Please let me know how everything goes and provide details on any issues that remain (if there are any).
Thank you for posting on the HP forums.
I worked on behalf of HP.

Need assistance with multiple issues with several G5's

Similar Messages

Maybe you are looking for