Need assistance with ORA-12154 issue

I know this has been answered several times so i'll try to eliminate most of the common troubleshooting.
I'm on a 64 bit windows server running one database called PECDB on Oracle Database 10.2.0.1.
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
TNSnames.ora was recreated using Net Config Assistant and ran lsnrctl status and tnsping PECDB to verify it is correct. Sqlplus works and connecting using MSACCESS (ODBC) from a client machine works also.
Problem: A user requested the IT dept to install his program called "STATA 10" directly on the server to take advantage of the memory. STATA uses the ODBC to connect to the database. I created the ODBC on the server which tested successfully. Now in Stata you type the following command to list all ODBC's available:
odbc list
which shows:
Data Source Name Driver
PECDB Oracle in PECDB
Then you type this that should list all tables owned by the specified user:
odbc query "PECDB", user(x) password(x)
but instead I get this error message:
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
, SQLSTATE=08004
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
I'm not sure where else to look and hoping someone here can help me.

user6711087 wrote:
I know this has been answered several times so i'll try to eliminate most of the common troubleshooting.
I'm on a 64 bit windows server running one database called PECDB on Oracle Database 10.2.0.1. PECDB? Uh, could I hazard a guess and ask you to come down to room 101?
>
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
TNSnames.ora was recreated using Net Config Assistant and ran lsnrctl status and tnsping PECDB to verify it is correct. Sqlplus works and connecting using MSACCESS (ODBC) from a client machine works also.
Problem: A user requested the IT dept to install his program called "STATA 10" directly on the server to take advantage of the memory. STATA uses the ODBC to connect to the database. I created the ODBC on the server which tested successfully. Now in Stata you type the following command to list all ODBC's available:
odbc list
which shows:
Data Source Name Driver
PECDB Oracle in PECDB
Then you type this that should list all tables owned by the specified user:
odbc query "PECDB", user(x) password(x)
but instead I get this error message:
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
, SQLSTATE=08004
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
I'm not sure where else to look and hoping someone here can help me.

Similar Messages

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)

Need assistance with Windows 2008 R2 server BSOD - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
I have a Windows 2008 R2 server which is experiencing random BSOD during the night. This is occurring maybe once or twice a week. I have gathered two Memory crash files. This server is running Citrix XenApp 6.5 but nothing else is reporting an issue except
for the memory dump. I’m looking for assistance in reading crash file and finding the cause.
I’ve spent over a week going through articles trying to learn and trouble shoot the BSOD but no closer to understanding the WinDbg 6.3.9600 report.
This is a production server and I have verified that Windows Updates has updated the server with latest releases. I’m hoping that the crash file will show something before I have to run the Driver Verifier.
The crash zip file is located -
https://onedrive.live.com/redir?resid=9644A4E0A26873B1!2359&authkey=!AMS4Svuk-SS3-JA&ithint=file%2czip
*                        Bugcheck Analysis
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: fffff880009eff38, Virtual address for the attempted execute.
Arg2: 8000000002cfe963, PTE contents.
Arg3: fffff8800da2eea0, (reserved)
Arg4: 0000000000000002, (reserved)
Debugging Details:
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xFC
PROCESS_NAME: powershell.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff8800da2eea0 -- (.trap 0xfffff8800da2eea0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80070f3648 rbx=0000000000000000 rcx=fffffa80070f3648
rdx=fffff8800da2fbf8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001680b80 rsp=fffff8800da2f030 rbp=fffff8800da2fbd0
r8=fffff8a01804c680 r9=fffff8800da2fc68 r10=fffffffffffffffd
r11=fffff8800da2fa90 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up di pl nz na pe nc
nt!KiPageFault:
fffff800`01680b80 55              push    rbp
Resetting default scope
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+44dfc
fffff800`017008b8 cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+44dfc
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 531590fb
IMAGE_VERSION: 6.1.7601.18409
FAILURE_BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
BUCKET_ID: X64_0xFC_nt!_??_::FNODOBFM::_string_+44dfc
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xfc_nt!_??_::fnodobfm::_string_+44dfc
FAILURE_ID_HASH: {aa632d36-b0f7-67cf-89e2-1cec389c0a11}
Followup: MachineOwner

Hi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

I want to cancel my membership. I need assistance to address this issue

I want to cancel my membership. I need assistance to address this issue. It seems that they have made a repeating loop of unhelpful links to prevent you from canceling a membership. Any advice? --Travis

Moving this discussion to the Adobe Creative Cloud forum.
Adobe you suck! cancel me please contact our support team directly at Contact Customer Care to cancel your membership. If you are not being given the option to chat with a member of our support team then please utilize a different web browser. Which web browser and version are you currently using?

Loosing connections with ORA-12154

Our scenario goes like this. We run transaction(1000's) fine for a while
(hours!), then we get the following errors in sequence for short period of
time(~2-5 minutes):
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
Our application, during that time, stops with ORA-12154 from Oracle. Then
everything seems to recover fine and we process transaction again fine for
hours. Why would we loose the connections like this while we are running
transaction non stop through the system?
Regards,
Andre Dionne

We are running on solaris 8. This morning we tried to start the application
servers with the minimum connection equal to the maximum(150) and we got
ORA-12154 after creating 122 connections. Could it be related to the Oracle
OCI8 driver we are using?
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]..
>
>
Andre Dionne wrote:
Our scenario goes like this. We run transaction(1000's) fine for a while
(hours!), then we get the following errors in sequence for short period
of
time(~2-5 minutes):
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
Our application, during that time, stops with ORA-12154 from Oracle.Then
everything seems to recover fine and we process transaction again finefor
hours. Why would we loose the connections like this while we are running
transaction non stop through the system?
Regards,
Andre DionneHi. For stability and performance, I recommend defining your connectionpool
to make all it's connections at startup (init = max). Oracle is sometimesweak
when being asked for lots of connections at any one time. Sometimes itgets overrun,
and fails some connection attempts. Also, tell me if you're running onSolaris.
Joe

HT201209 I need assistance with trying to figure out how to change my security code answer

I need assistance with trying to figure out how to change my security code answer

If you mean the answers to your security questions, then f
rom http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers (the steps half-way down that page should give you a reset link)
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

LaCie doesnt make ANYTHING. It contains a Seagate 3.5" 5400RPM HD.
Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
those external HD use a 50 cent SATA bridge famous for failing. The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
Sata bridge:

I need assistance with uploading pictures from mobile connection to computer

I need assistance with uploading pictures from my mobile to my computer

I need assistance with uploading pictures from my mobile to my computer

I need assistance with changing language from German to English

I need assistance with changing language from German to English. Unable to uninstall product from control panel.

What exactly means "unable"?
Since you mention Control Panel, I assume that you are on Windows. Try using http://labs.adobe.com/downloads/acrobatcleaner.html

Need assistance with multiple issues with several G5's

Hello All,
I need to get some assistance with some issues that I am having with several G5 Dual’s
I just started a new position and I have 4-G5 Dual’s that are in various states of disrepair. Normally I would call Apple support but they did not purchase the extended AppleCare packages for any of the G5’s theu purchased and they are ALL over a year old now. Any suggestions would be greatly appreciated.
G5 number 1 - Has its fans running at full output all the time. Could this be a firmware issue?
G5 number 2 – Had it’s logic board replaced by one of our company computer techs and now at start up gives a long tone then boots to white screen with a command prompt. Requiring me to either type “mac-boot” or “shutdown”. If I continue the boot process the machine just goes to a gray screen and stalls. I researched this yesterday and tried several solutions I found here but to no avail. Seems to me that past of the issue is that it is stuck looking for a firmware upgrade. How do I get past it?
G5 number 3 – Mac seems to boot correctly but when you click on the Apple icon in the upper left hand corner the Finder blinks out and then comes back. It does this every time we try to go to the Apple menu. We removed the original hard drive and installed in a known good drive, our tech drive with a G5 image, rebooted the mac and the same issue occurs with the Finder.
G5 number 4 – This unit boots to black screen with a Unix command prompt displaying “root#”. Any thoughts.
Thanks
Paul
G5 Dual Mac OS X (10.3.9)
G5 Dual Mac OS X (10.3.9)

Apparantly someone not certified to repair them messed them up.
Tell bossman it would be in his best interest for you to take them to a authorized Apple Repair and get it done with.
Tell him that Mac's rarley screw up hardware wise and there really hasn't been a great demand for skilled repair techs outside of Apple.
If your worried about your job, tell him you can take care of the software, training, minor hardware and networking end of the matter. Which, luckily for you, are longtern and ongoing needs. You can tell him that.
There's nothing wrong in admitting you don't know how to do something and keeping your job, than to be unable to fix them and lose your job.

Not able to resolve ORA-12154 issue

Hi,
have installed a Oracle 11g on a 64-bit Windows 2008R2 server. Installation based on logs was success full, however I do have some issues with getting TNS to work. I am able to TNSPING the server and it returns expected result, but when i try to connect via SQLPLUS (sqlpuls ora/ @srv1) it results in "ORA-12154: TNS:could not resolve the connect identifier specified".
We are in contact with the sid by bypassing TNSNAMES.ORA , but that does not resolve my issue since i need this to work.
I have attempted some suggested changes to tnsnames.ora, sqlnet.ora and listner.ora with out success sofar.
Hope some one has some suggestions on how to overcome this issue
tnsnames.ora
SRV1=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = test1.example.com)(PORT = 1521))
(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_MAME = srv1)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
          (ADDRESS = (PROTOCOL = TCP)(HOST = test1.example.com)(PORT = 1521))
ADR_BASE_LISTENER = C:\oracle

Posting the requested data. If the result from lsnrctl services/status seem a bit strange, please assist me in change settings so that output is english:-)
LISTNER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
          (GLOBAL_BDNAME=srv1)
(SID_NAME = srv1)
(ORACLE_HOME = C:\oracle\product\11.2.0\dbhome_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = test1.example.com)(PORT = 1521))
ADR_BASE_LISTENER = C:\oracle
TNSNAMES.ORA
srv1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =148.53.60.44)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = srv1)
C:\Users\CJuell>lsnrctl services
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2011 13:22
:44
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Kobler til (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=test1.example.com)(
PORT=1521)))
Tjenesteoversikt...
Tjenesten srv1 har 1 forekomst(er).
Forekomsten srv1, statusen UNKNOWN, har 1 behandler(e) for denne tjenesten.
Behandler(e):
DEDICATED etablert:0 avslÕtt:0
LOCAL SERVER
Tjenesten srv1.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Behandler(e):
DEDICATED etablert:5 avslÕtt:0 tilstand:ready
LOCAL SERVER
Tjenesten srv1XDB.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Behandler(e):
D000 etablert:0 avslÕtt:0 gjeldende:0 maks:1022 tilstand:ready
DISPATCHER <machine: OSL-PPMV-VM31, pid: 2864>
(ADDRESS=(PROTOCOL=tcp)(HOST=test1.example.com)(PORT=61088))
Kommandoen ble utf°rt
C:\Users\CJuell>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2011 13:23
:00
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Kobler til (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=test1.example.com)(
PORT=1521)))
STATUS FOR LYTTERPROSESS
Alias LISTENER
Versjon TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Startdato 29-MAR-2011 11:44:12
Oppetid 0 dager 1 t. 38 min. 48 sek
SporingsnivÕ off
Sikkerhet ON: Local OS Authentication
SNMP OFF
Lytterens parameterfil C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
er.ora
Lytterens loggfil c:\oracle\diag\tnslsnr\osl-ppmv-vm31\listener\alert\lo
g.xml
Sammendrag for lyttende nettverksknutepunkt...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.example.com)(PORT=1521
Tjenesteoversikt...
Tjenesten srv1 har 1 forekomst(er).
Forekomsten srv1, statusen UNKNOWN, har 1 behandler(e) for denne tjenesten.
Tjenesten srv1.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Tjenesten srv1XDB.ingrnet.com har 1 forekomst(er).
Forekomsten srv1, statusen READY, har 1 behandler(e) for denne tjenesten...
Kommandoen ble utf°rt
C:\Users\CJuell>lsnrctl services

Windows 2003 R2 installation failing with ORA-12154

Windows 2003 R2 Enterprise default installation, no Windows Updates at all
Pentium 4, 2 gb ram, 127 gb hard drive
In a workgroup using DHCP
Installed Microsoft Loopback Adapter as per installation docs (which I read)
Default installation of Oracle 10g R2 Enterprise, which installs a starter database.
During the step Creating and starting Oracle instance with Clone database creation in progress at 46%, an error dialog appears:
ORA-12154: TNS:could not resolve the connect identifier specified.
The same problem occured when using a static IP address. About a year ago I followed the same steps with 2003 Enterprise (not the R2 version) and was successful. I also tried installing on XP Pro Service Pack 2 and failed at the same point.
At this point I am completely unable to install Oracle 10g R2 on Windows using the default options. I even tried just installing Oracle without the starter database and then use DBCA to create a database. It failed to create a database.

some more information
I’ve just restarted the server with its full quota of 16GB of RAM and selected both boot.ini switches (/PAE and /3GB) at server startup. I then amended the dbblock_lru_latches parameter from 128 to 64. Before I even started the database I tried running ‘ipconfig /all’ at the command prompt with the following result:
D:\Oracle>ipconfig /all
Windows IP Configuration
An internal error occurred: Insufficient system resources exist to complete the requested service.
Please contact Microsoft Product Support Services for further help.
is it windows causing these issues?
rgds
alan

11g fails in Database Configuration Assistant with ORA-01919

I'm installing 11g on a 32-bit CentOS (redhat) box, and the Database Configuration Assistant is failing with
ORA-01919: role 'XDBADMIN' does not exist
I can in fact read, so I do know what's causing this particular error (and all the cascading errors if I hit the "ignore" button) but I don't know what I missed earlier in the installation process that should have created this role.
The Database Configuration Assistant is at 46% completion when it throws up this error.
Looking in the logs under /usr/lib/oracle/xe/app/oracle/cfgtoollogs/dbca/orcl/mkplug_v3_orcl.log
I see this particular error in
specify password for OE as parameter 1:
PROMPT password for SYS as parameter 2:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[/<password>][@<connect_identifier>] [edition=value] | /
GRANT xdbadmin TO oe
ERROR at line 1:
ORA-01919: role 'XDBADMIN' does not exist
GRANT create any directory TO oe
ERROR at line 1:
ORA-01031: insufficient privilegesBut I think this is a secondary error. The log file's first entry is an error:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER|SYSASM}]
where <logon> ::= <username>[/<password>][@<connect_identifier>] [edition=value] | /
20090714 07:01:02
1 row selected.
old 1: CREATE USER hr IDENTIFIED BY &&password_hr
new 1: CREATE USER hr IDENTIFIED BY change_on_install
User created.
....Any help where I can look to get closer to the original error?
Thanks!

You should check out metalink doc id 742014.1, "XDB 11g Install and Deinstall Note."
Hopefully this helps.

Strange problem with ORA-12154 from only one client

Hi all,
I have a strange problem.
I have three 11.2.0.1 databases on three different hosts.
For simplicity lets say:
Host1: database ovm1a
Host2: database ovm7a
Host3: database ovm8a
I have a database schema in all three databases named EHJ. In all three databases, there are fixed user
database links to the other databases. So EHJ in ovm1a has two links, one to ovm7a and one to ovm8a. The EHJ schema in ovm7a has two fixed user links to the EHJ schema in the ovm1a and ovm8a databases. And the same is true for the EHJ schema in the third database, ovm8a.
If I log into the EHJ schema for each of the three databases, I can successfully select over the database links. I've been using the SQL statement: select count(*) from user_users@dblink_name;
For each of the two links in each of the three databases, the query returns 1 so I know the database links are working properly and I have my networking setup properly.
Now, here is the weirdness.
I have an Oracle Application Server where our Oracle Forms and Reports run. The Oracle client on this install is 10.1.0.5. I've got a tnsnames.ora file setup on this Oracle App server to connect to all three databases ovm1a, ovm7a and ovm8a. I can successfully use the 10.2.0.5 client SQL*PLUS to connect to the EHJ schema in the ovms1, ovms7 and ovms8 databases.
However, (and only when) connected to the ovm1a database from this client, attempts to select over the link throw the famous error: ORA-12154: TNS:could not resolve the connect identifier specified
This error happens with both links in the ovm1a database when connected via this one client.
BUT, if I connect using the same 10.1.0.5 client to the EHJ schema in the ovm7a or ovm8a databases, the database links in those two databases are working just fine.
I'm pulling my hair out trying to figure this out.
I've tried using SQL*PLUS from my desktop machine (10g R2 client) connecting to the EHJ schema on all three databases and the db links all work fine.
Any help in trying to troubleshoot this would be greatly appreciated.
Cheers

JSebastian wrote:
I have an Oracle Application Server where our Oracle Forms and Reports run. The Oracle client on this install is 10.1.0.5. I've got a tnsnames.ora file setup on this Oracle App server to connect to all three databases ovm1a, ovm7a and ovm8a.But the client (and tnsnames.ora) in question here is actually one (each) of the three databases, right? I.e. error is thrown by the db server, acting as client (db link side).
>
However, (and only when) connected to the ovm1a database from this client, attempts to select over the link throw the famous error: ORA-12154: TNS:could not resolve the connect identifier specified Connected how, as opposed to when you "successfully select..."?
This error happens with both links in the ovm1a database when connected via this one client.Does Oracle config files on ovma1 host differ from the other two db hosts?
Does
SQL> select property_name,property_value from database_properties
2 where property_name in ('GLOBAL_DB_NAME','NLS_RDBMS_VERSION');
SQL> select owner,db_link,host from dba_db_links;return as expected on all three db's?
I've tried using SQL*PLUS from my desktop machine (10g R2 client) connecting to the EHJ schema on all three databases and the db links all work fine.Make sure you are connecting to correct databases. (Simply, three tns aliases could all be pointing to the same database.)
Edited by: orafad on May 25, 2011 11:24 PM

Need Assistance with Plugin

I am trying to acess my Nascar trackpass. I keep getting an error message that my flashplayer plug in keeps crashing. What Can I do?

Hi Kaysel_GTG,
Just addition. Regarding to Bug Check 0xFC, please refer to following article and check if can help you.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
By the way, since it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
if any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Need Assistance With Custom Calculation Script

I need help with a custom calculation script in Acrobat Pro. I am trying to add the sum of fields A, B, C, D, E, F, and G together with the lesser value of fields H and I. What would be the script to enter for this result? Thank you.

event.value = Number(this.getField("A").value) + Number(this.getField("B").value) + Number(this.getField("C").value) + Number(this.getField("D").value) + Number(this.getField("E").value) + Number(this.getField("F").value) + Number(this.getField("G").value) + Math.min(Number(this.getField("H").value), Number(this.getField("I").value));

Need assistance with ORA-12154 issue

Similar Messages

Maybe you are looking for