Need Checklist for migrating MS SQL 2005 SP2 to MS SQL 2012

Dear Member,
We are in process of  migrating our MS SQL 2005 SP2 db engine / SSIS/SSRS services to 2012.Need to know steps/checklist and experiences of migration.
I have read on Microsoft site (http://msdn.microsoft.com/en-in/library/ms143393(v=sql.110).aspx), that we can only migrate SQL 2005 with SP4 to SQL 2012.Do we need to upgrade first existing 2005 SP2 to SP4 and then start migration.
Regards,
Mahesh 

Hello,
Yes, you need to apply SP4 first, if you choose to perform an in-place upgrade.
You have the option to perform a side-by-side upgrade too. Please refer to the following guide:
http://download.microsoft.com/download/9/5/3/9533501A-6F3E-4D03-A6A3-359AF6A79877/SQL_Server_2012_Upgrade_Technical_Reference_Guide_White_Paper.pdf
Hope this helps.
Regards,
Alberto Morillo

Similar Messages

  • Checklist for migration from oracle 9i to oracle 10g DB

    Hi all,
    My previous DB was Oracle 9i.I want to migrate it to Oracle 10g DB.
    So can anybody provide me the checklist for the same ?
    Thanks in advance....

    It doesn't matter how long this process may take to read the entire upgrade documentation. You are supposed to perform this procedure first on a testing environment prior to perform it against the actual production database, you can take all the time you need to customize trim and tailor the procedure to your particular environment requirements. Don't expect anybody else to provide a shortcut, you will find at the end it will take you more time to correct missing upgrade steps and you will -most probably- have to read much more google references and metalink documents that will size bigger than the upgrade guide.
    I suggest you to read through the upgrade document, and don't look for shortcuts. I also suggest you to document issues you may find when performing the upgrade. In my particular scenario I had to deal with an ORA-04030 error, among other things after I performed an upgrade process. You may want to take a look at the not documented Issues I had to face after a production upgrade, and even though I read through the upgrade guide and performed several testing upgrades, there are issues such as user's actual workload that cannot be accurately measured in a testing environment.
    Ref. Issues found when upgrading 9.2.0 to 10.2.0
    ~ Madrid
    http://hrivera99.blogspot.com/

  • SQL 2005 SP2 - Cannot open Data Flow Task in SSIS

    I have just installed Service Pack 2 on my SQL 2005 Standard Edition.
    However, now all my SSIS packages will not allow me to open my Data FLow Tasks.  I get the following error:
    TITLE: Microsoft Visual Studio
    Cannot show the editor for this task.
    ADDITIONAL INFORMATION:
    The task returned an unsupported control editor type. (Microsoft.DataTransformationServices.Design)
    If I try to create a new Data Flow task I get:
    TITLE: Microsoft Visual Studio
    Failed to create the task.
    ADDITIONAL INFORMATION:
    The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
    I have tried to install the latest hotfixes after this but they had no effect.
    Can anybody help me???? Please?

    I have had this same issue, where tasks would open fine in an SSIS package until SP2 was installed and then I get the same issue as noted above, i.e. :
    TITLE: Microsoft Visual Studio
    Cannot show the editor for this task.
    ADDITIONAL INFORMATION:
    The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
    If anyone has some ideas on this, it would be greatly appreciated.

  • Need details for migrating universe

    Hi,
    I have 2 server's server A(Dev) and Server B(Stage).
    I need to know if we have any document/pdf/link for migrating universe from Dev --> Stage.
    What all the various options we can use like and how?
      -> Publishing wizard
      -> Import wizard.
    Thanks,
    Akhilesh.

    Import wizard is the tool used to migrate your objects from one server to another
    good luck

  • What issues will I have if I take sql 2005 on 32bitOS TO sql 2005 on 64bit?

    Last Year our SolMan was installed on 32bit OS, with SQL 2005 on Windows Ent. Edition (UNICODE).
    I am preparing to migrate it to 64bit OS, and want to get there as quickly as possible without jepordizing the data integrity.
    I was thinking that rather than doing a data export and import, that I could simply do a detach/attach of sql 2005
    On the NEW server with 64bit OS My plan is to install SolMan 7.0 UNICODE & SQL 2005
    If anyone has had experiences with this I would really appreciate tapping into your experience
    Thank You in Advance
    Regards,
    Maria

    Hello Maria,
    We have used attach and detach method. We used the system copy option in the installation master for the java instance. Search for SAP notes for more detail - i dont have the right note handy.
    Regards,
    Anand

  • How to Install SQL 2005 with command MS SQL 2005.

    Hello All,
    Where can I get the guide for  installaling ECC 6.0+MS SQL 2005/2008 from command prompt.
    I checked the standard work guides at market place but no hint found for command line installation.
    Please help me.
    Thanks,
    Anu

    Wrong subject line

  • Link/checklist for migrating applications from Oracle 9i to Oracle 11g?Help

    Hi all,
    We need to perform an impact analysis on migratiing an application from Oracle 9i to Oracle 11g. Does any of you have a detailed checklist to follow, in terms of queries, PL/SQL statements, optimizer etc. etc., when attempting this migration. We require something more specific from the application point of view rather than a DBA point of view.
    Additionally, we have queries written extensively with rule hints. Should there be a special consideration for the same since now we are moving to CBO in 11g
    Even if any one has a link, that would help. Thank you so much!

    Hi Nikhil,
    Thanks Xaheer,You're welcome :)
    I'm going through the link: http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/toc.htm
    But it still mentions stuff from a DBA angle. I need from an application angle.
    Do I need to change my queries taht are current written with RBO? Do I need to change Pl/SQL blocks ?Please refer tech below notes:
    *1)TROUBLESHOOTING: Server Upgrade Results in Slow Query Performance -- 160089.1*
    *2)TESTING SQL PERFORMANCE IMPACT OF AN ORACLE 9i TO ORACLE DATABASE 10g RELEASE 2 UPGRADE WITH SQL PERFORMANCE ANALYZER -- 562899.1*
    Before upgrading your production database, please perform upgrade of test database and do complete testing.
    Hope helps
    Regards,
    X A H E E R

  • Problem CCA 8.1.2 - BEA Weblogic 10.0.1 MP1 - SQL 2005 SP2

    Hi, i need some help, i'm trying to install those configuration, but web application start in bea console i have several errors in log:
    ++++++++++++++++++++++++++++++++++++++++++++++
    25 Mar 2009 20:11:59,306 [[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR Revision: 13 .pingDB(DatabaseService.java:69) - pinging db: TAW_PRIVATE_DATASOURCE
    25 Mar 2009 20:11:59,322 [[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR Revision: 13 .getDBConnection(DatabaseService.java:495) - got sql exception when try to get db connection: java.sql.SQLException: User: CC81, failed to be authenticated.
    25 Mar 2009 20:11:59,322 [[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] DEBUG Revision: 13 .getDBConnection(DatabaseService.java:508) - close connection
    25 Mar 2009 20:11:59,322 [[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR Revision: 13 .pingDB(DatabaseService.java:83) - got sql error in pingDb, retVal = false
    25 Mar 2009 20:11:59,322 [[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR Revision: 9 .retriveNewLiveDB(DatabaseConnections.java:65) - All the databases are down!
    25 Mar 2009 20:11:59,322 [[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR RegionalizationLibrary.populateBean(RegionalizationLibrary.java:210) -
    java.lang.NullPointerException
         at com.taw.database.TableDataSet.<init>(TableDataSet.java:32)
         at com.taw.database.TableDataSet.<init>(TableDataSet.java:27)
         at com.taw.clients.am.regionalization.RegionalizationLibrary.loadTemplateName(RegionalizationLibrary.java:247)
         at com.taw.clients.am.regionalization.RegionalizationLibrary.loadTemplate(RegionalizationLibrary.java:238)
         at com.taw.clients.am.regionalization.RegionalizationLibrary.populateBean(RegionalizationLibrary.java:206)
         at com.taw.clients.am.regionalization.RegionalizationLibrary.<init>(RegionalizationLibrary.java:64)
         at jsp_servlet.__index._jspService(__index.java:183)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3395)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    ++++++++++++++++++++++++++++++++++++++++++++++++++++
    HELP ME PLEASE!!!

    Can you successfully telnet from the webserver to the db server over 1433?
    Also,
    did you install the proprietary Microsoft SQL Server 2005 JDBC Driver?

  • Need driver for XP media center 2005

    Hi
    I have TV anywhere
    was working with XP pro
    I did upgrade my system
    now I have XP media center 2005
    Reinstalled the MSIPVS TV @nywhere card.
    I got my video but no sound
    need help

    MSIPVS:TV@nywhere  8876 ver1.00
    Conexant CX23881-27   E232040.1
    N1996
    in XP I did use
    The MSI PVS software version 2.0.34.198
    audio /video are good
    using the same driver for xp media
    got video but no sound
    system has realtek sound card
    system =acer E380

  • Using SLT for migration (Sybase ASE(15.7) to MS SQL server 2014)

    Hi,
    Is it possible to use SLT for data migration (Active-Active replication) from Sybase ASE (15.7) to MS SQL Server (2014) ?
    I want to use a separate host to do this migration, if possible.
    Viral Dave

    Hi Viral,
    What do you mean the SLT for data migration? Do you want to use Sybase ASE as the source system, and MSSQL as the target system? If yes, I think it is possible.
    Best regards,
    Candy Zhan

  • Need Checklist for websecurity

    I want to have a checklist which will give my code more secure for web.
    Where I need to make my code more secure. Java,jsp,servlets and frontend html.
    Please suggest me sites or checklist which i have to be noted while writing java /j2ee based applicaions.
    kiran

    HI ,
    Actually I have seen your link today but I could not find any websecurity related info there.
    Could youplease suggest me exactly the link where I can search for the checklist and all.
    Regs
    Kiran

  • Upgrade MS SQL 2005 platform to MS SQL 2008 - Update the JDBC driver...

    Hello to all,
    This is the second post that I created reporting this error because in the first one I open this message in group of "SAP on SQL Server" but without any kind of help from community:
    My problem is...
    I´m planning to do an upgrade of a sap system (SAP ECC 6.0) from SQL Server 2005 to a SQL Server 2008 but I´m facing with a little problem. This system has two stacks - ABAP + JAVA - and because of that the Upgrade Guide to MS SQL Server 2008 describe which are the requirements for this upgrade DB platform, and one of them is this:
    "If you use a Java system, you have updated the JDBC driver as described in SAP Note 639702"
    ... the updated of JDBC driver when we have in system a Java part, like it has in this case! But I´m with a serious problems to find in SAP System Files in Windows 2003 Server the four files that is mentioned in that note 639702. I can´t find it anywhere... in note says:
    Depending on the SAP release and the system configuration, the driver files base.jar, util.jar, sqlserver.jar, and spy.jar are available in an installed system at:
    (NetWeaver'04, Java:) usrsap<SAP SID>JC<InstanceNumber>j2eejdbc
    (NetWeaver'04, ABAP+Java:) usrsap<SAP SID>DVEBMGS<InstanceNumber>j2eejdbc
    (NetWeaver 2004s:) usrsap<SAPSID>SYSexe<NUC|UC>Platformmssjdbc
    But... still I didn´t find them! I also read other note 1109274 - New JDBC driver for NetWeaver 7.0 and higher but even so I still can´t find it!
    Can you help me to find this files on my operation system? I have to update that JDBC... but of course for this task I have to find it first!!!
    Best regards,
    João Dimas - Portugal

    Hi,
    Have you considered the possibility that the directory that was supposed to contain the jdbc drivers has been replaced by a recent kernel upgrade and you never noticed?
    Anyway, looking forward, put in a new set of JDBC drivers in the correct location.
    Also, with reference to the following point from the first note:
    Check your JDBC Driver version before you download it. To do this, unpack the attached check tool SAPCheckVersion in the relevant JDBC directory (refer to the previous paragraph). Then open a command prompt there and execute the following command:
    SAPCheckVersion.cmd <server name> <username> <password>
    Replace <server name> with the name of the database server, <username> and <password> with the logon data of an SQL user (for example, sa or SAP<SID>DB). If you call SAPCheckVersion.cmd without a parameter, the system displays detailed help. The tool supports both DataDirect and Microsoft drivers.
    *The download name tells you which version of the driver you need to download from SAP Service Marketplace.*
    Run this SAPCheckVersion and find out which drivers you need to download and then download them and use them.
    Regards,
    Shitij

  • Upgrade MS SQL 2005 platform to MS SQL 2008 - Update the JDBC driver issue

    Hello to all,
    I´m planning to do an upgrade of a sap system (SAP ECC 6.0) from SQL Server 2005 to an SQL Server 2008 but I´m facing with a little problem. This system has two stacks - ABAP + JAVA - and because of that the Upgrade Guide to MS SQL Server 2008 describe which are the requirements for this upgrade DB platform, and one of them is this:
    "If you use a Java system, you have updated the JDBC driver as described in SAP Note 639702"
    ... the updated of JDBC driver when we have in system a Java part, like it has in this case! But I´m with a serious problems to find in SAP System Files in Windows 2003 Server the four files that is mentioned in that note 639702. I can´t find it anywhere... in note says:
    Depending on the SAP release and the system configuration, the driver files base.jar, util.jar, sqlserver.jar, and spy.jar are available in an installed system at:
    (NetWeaver'04, Java:) usrsap<SAP SID>JC<InstanceNumber>j2eejdbc
    (NetWeaver'04, ABAP+Java:) usrsap<SAP SID>DVEBMGS<InstanceNumber>j2eejdbc
    (NetWeaver 2004s:) usrsap<SAPSID>SYSexe<NUC|UC>Platformmssjdbc
    But... still I didn´t find them!  I also read other note 1109274 - New JDBC driver for NetWeaver 7.0 and higher but even so I still can´t find it! 
    Can you help me to find this files on my operation system? I have to update that JDBC... but of course for this task I have to find it first!!!
    Best regards,
    João Dimas - Portugal

    Hello John Feely,
    Yeah I already know that you mentioned! In my first post/previous message I mentioned that, I already read the note 639702 and it was there I read that explanation... regarding that creation that you refer in the case of files are not in those directories, so you said that I could download this four files and put in there... but where? and how..? Sorry but that solution seems does not make any sense!
    I also look other systems with double stack ABAP + JAVA and I one more time I didn´t see that directories or files that are mentioned in that note!! DAMN!
    Any tip?
    Kind regards,
    João Dimas - Portugal

  • Issues connecting to sql 2005 database using Oracle sql developer 1.2

    I just installed the sql developer and was trying to use the quick migrate to try a migration from a sql server to oracle..
    I am getting the following error message when i click on the retrieve database after entering the database credentials
    Status : Failure net.sourceforge.jtds.jdbc.driver
    I am getting another error message when i click on the 'test' button
    Status: Failure - Unable to find driver: net.sourceforge.jtds.jdbc.driver
    I downloaded the jtds driver from source forge and i am wondering what I should do to get the sql developer to make successful connections to sql server.
    Any help is appreciated.
    Thanks

    I have the same issue with both version 1.1.3 of the SQL developer and the latest version(1.2.1). I have added the jar file path in tools->preferences->Database->Third Party etc...
    I got the jar file from this download: jtds-1.2.2-src.zip
    I get this error when trying to connect to an sql server:
    oracle.jdeveloper.cm.CMException: Unable to find driver: net.sourceforge.jtds.jdbc.Driver
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:175)
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:202)
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:68)
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:1004)
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:876)
         at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
         at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
         at java.lang.Thread.run(Thread.java:595)
    Any help would be appreciated. I like the tool would hate to have to abandon it, it works like a charm on our oracle databases.

  • Is anybody successfully migrated SSRS 2005 SP2 to SSRS 2014?

    what I was doing:  Try to migrate the ssrs 2005 sp2 in a old web server to SSRS 2014 in a new server (native mode)
    1. old SSRS web server:  SSRS 2005 SP2 enterprise edition with window server 2003  (server 1)
    2. New SSRS web server:  window server 2012 R2, installed sql server 2014 database engine and SSRS. (server 2)
    3. backup configuration files, encryption key, we have no custom assamblies from the old SSRS web Server (server 1)
    4. Backup the report server databases from the existing old database server. (server 3)  (our SSRS web server and SSRS report server databases are in different servers)
    5. Created the RSExecRole and grantd all the permissions according to the documentation in the sql server 2014 database server (server 4)
    6. Restore the databases to the new database server that is in sql server 2014. (server 4)
    7. Go to server 2 to configure the reporting service using the configuration Manager
     I successfully pointed to new databases, but when test the url, I got the error:  The version of the report server database is either in a format that is not valid or it can not be read.  The found version is '143' and the expected version
    is '162'
    I worked with Microsoft technician, and he said I have to upgrade my old SSRS from 2005 SP2 to 2005 SP4 first then do the migration.   But I saw some article saying that I can migrate the SSRS from 2005 SP2 to SSRS 2014.   Any help is
    very much appreciated.  
    Li-hui Chen

    Thank you Katherine for your reply!  I was able to bring up the reports in my new Report web server when I restore the RS databases onto a sql server 2008 server.  I got the version conflict error when I restore the databases directly onto a sql
    server 2014 server.  Our goal is migrating the SSRS 2005 SP2 to SSRS 2014 with databases in sql server 2014. Therefore, I will have to migrate the SSRS 2005 to 2014 but host the Reporting server databases in sql server 2008 R2 first, then
    upgrade Reporting Server databases to sql Sql server 2014. 
    Below steps are what I have done so far to migrate the SSRS from 2005 to 2014:
    1. install sql server 2014 on a new server (RS server 2- SSRS 2014)
    2. backup up config files, encryption key, application files in old reporting server(RS server 1 - SSRS 2005 SP2)
    3. backup the reporting server databases from old database server  (in sql server 2005 sp4) (RS databases server 1)
    4. Move config files and encryption key backup files to new RS server 2.   
    5. Move databases backup files to another server (in Sql server 2008 R2 (RS databases server 2) 
    6. Restore the backup files to (RS databases server 2)
    7. Configure the Reporting services in new server (RS server 2 - SSRS 2014)
        a. configure URL
        b. change databases connection
        c. Restore the encryption key
    8. Check the reports.
    Now, I am able to see all the reports in my new web server(SSRS 2014) and the databases are in the server that is in SQL Server 2008 R2 version. 
    My collegue will upgrade the database server 2 including the report server databases and some other databases (currently in sql server 2008 R2 version with some other databases). 
    1. When she upgrades the database server 2 from sql server 2008 R2 to sql server 2014, do I need to do anything on the new reporting service web server?
    2. I was thinking about that I will need to do the RS databases backup and encryption key backup  before my colleuge do the sql server 2014 upgrade, and after she finish the upgrade, I will then go to new SSRS web server to do the reporting
    service configuration using the configuration manager tool.  I will do the database set up and restore the encryption key.  Am I right? 
    Any comment and suggestion will be great appriciated! Have a nice day!
    Li-hui Chen

Maybe you are looking for