Need clarity on data federator workarounds for BW as mentioned in threads

Hi Experts,
We checked a related thread with (Re: Restricted key figures from a Data Federator Universe), with Ingo Hilgefort's reply that we can create filtered measures on universe level, but in our scenario it is not working, since in the generated SQL, all the where conditions created for filtered measures are getting combined with AND operator, and hence not producing any report.
For eg, if we are creating two different filtered measures for sales in US, and sales in UK, the generated SQL will combine the conditions as below:
select sales, sales from <tbl name>
where country = "US" AND country = "UK"
which definitely wouldn't produce any result, since country can be either US or UK, not both for any record.
We need to know how to proceed with this scenario.... will it be by creating aliases for fact table and using different contexts, writing subqueries in custom SQL, or any other workaround...?
Guidance on the same is needed urgently. Please share your experience and thoughts regarding the same.
Regards,
Suzane

You can do a DB Connect to MySQL DataBase. What is the OS and DB of your BW app server and OS for My SQL.
refer: http://help.sap.com/saphelp_nw70/helpdata/EN/58/54f9c1562d104c9465dabd816f3f24/frameset.htm for list of supported DB's
If you want to automate the flat file, than write a SQL procedure to generate a CSV file daily from the DB.
Use OS command in the process chain to copy file to the BW server
Next perform data load in process chain.

Similar Messages

Based on Ingo Hilgefort's Thread, need info abt data federator workarounds

Hi Experts,
We checked a related thread with (Re: Restricted key figures from a Data Federator Universe), with Ingo Hilgefort's reply that we can create filtered measures on universe level, but in our scenario it is not working, since in the generated SQL, all the where conditions created for filtered measures are getting combined with AND operator, and hence not producing any report.
For eg, if we are creating two different filtered measures for sales in US, and sales in UK, the generated SQL will combine the conditions as below:
select sales, sales from <tbl name>
where country = "US" AND country = "UK"
which definitely wouldn't produce any result, since country can be either US or UK, not both for any record.
We need to know how to proceed with this scenario.... will it be by creating aliases for fact table and using different contexts, writing subqueries in custom SQL, or any other workaround...?
Guidance on the same is needed urgently. Please share your experience and thoughts regarding the same.
Regards,
Suzane

Hi Experts,
We checked a related thread with (Re: Restricted key figures from a Data Federator Universe), with Ingo Hilgefort's reply that we can create filtered measures on universe level, but in our scenario it is not working, since in the generated SQL, all the where conditions created for filtered measures are getting combined with AND operator, and hence not producing any report.
For eg, if we are creating two different filtered measures for sales in US, and sales in UK, the generated SQL will combine the conditions as below:
select sales, sales from <tbl name>
where country = "US" AND country = "UK"
which definitely wouldn't produce any result, since country can be either US or UK, not both for any record.
We need to know how to proceed with this scenario.... will it be by creating aliases for fact table and using different contexts, writing subqueries in custom SQL, or any other workaround...?
Guidance on the same is needed urgently. Please share your experience and thoughts regarding the same.
Regards,
Suzane

I need a good data base system for both my imac and my PC. Any ideas?

I am a REaltor looking for a good data base software for my company and my agents that is usable with both the Mac computers and the PC's.

That would be FileMaker Pro, they make versions for both PC's and Macs. You can find information at:
http://www.filemaker.com/products/filemaker-pro/

Need help with date range searches for Table Sources in SES

Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….

raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!

Help needed! Usb Data recovery software for word documents?

A friend of mine has saved ALL of her precious work on a USB pen, which for no apparent reason has stopped working!
It isn't being recognised by windows, but my mac is detecting it with trial software which I cannot buy on my measly student income. Not doable.
Is there any data recovery software available for macs which detect microsoft documents which is....ummm free?
It's beginning to drive me mad I've been looking at this stupid pen for ages. But my mate has offered me 50 quid if I get it sorted, so I am persevering! Any help would be appreciated guys!

You can try the free Demo version of Data Rescue. It does not detect Word files; it's looking for anything on the device that matches the criteria you set.
Hope this helps,
Mulder
If my answer helped solve your problem, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9)

Data Federator - Array as input to web service.

Hi,
I have an ASP.NET web service method that takes in an array of string for input. I am adding this web method as a data source in Data Federator. However when I look at the method's parameters in Operations Selection in Data Federator, the array of string becomes a string. It seems that Data Federator only passes one element value as an array to the method. Is there any way for Data Federator to see the array correctly so that I can pass an array of string to the web method via Data Federator?
Thanks.

hi,
Data Federator does not support array types as input parameters. For the moment there is no Data Federator workaround for this limitation (the only possibility is to modify the WebService definition).
thanks.

Need a maximum date value using group by

Create table student (dept number(10), dep_name varchar2(10),join_date date,years_attended number(10),end_date date);
insert into student values (1,'I',to_date('3/7/1917','MM/DD/YYYY'),4,to_date('8/26/1987','MM/DD/YYYY'));
insert into student values (1,'I',to_date('1/1/1900','MM/DD/YYYY'),4,to_date('8/26/1932','MM/DD/YYYY'));
insert into student values (1,'D',to_date('1/1/1920','MM/DD/YYYY'),5,to_date('8/26/1994','MM/DD/YYYY'));
insert into student values (1,'C',to_date('1/1/1920','MM/DD/YYYY'),6,to_date('8/26/1945','MM/DD/YYYY'));
insert into student values (2,'I',to_date('7/1/1900','MM/DD/YYYY'),3,to_date('8/26/1932','MM/DD/YYYY'));
insert into student values (2,'I',to_date('8/16/1916','MM/DD/YYYY'),9,to_date('8/26/1923','MM/DD/YYYY'));
insert into student values (2,'D',to_date('8/16/1916','MM/DD/YYYY'),10,to_date('8/26/1987','MM/DD/YYYY'));
insert into student values (3,'I',to_date('3/7/1917','MM/DD/YYYY'),4,to_date('8/26/1987','MM/DD/YYYY'));
insert into student values (3,'D',to_date('7/28/1920','MM/DD/YYYY'),6,to_date('8/26/1945','MM/DD/YYYY'));
insert into student values (3,'I',to_date('7/28/1920','MM/DD/YYYY'),8,to_date('8/26/1965','MM/DD/YYYY'));
insert into student values (4,'I',to_date('12/31/1924','MM/DD/YYYY'),2,to_date('8/26/1998','MM/DD/YYYY'));
insert into student values (4,'I',to_date('6/10/1929','MM/DD/YYYY'),1,to_date('8/26/1943','MM/DD/YYYY'));
insert into student values (4,'C',to_date('1/17/1927','MM/DD/YYYY'),4,to_date('8/26/1955','MM/DD/YYYY'));
insert into student values (4,'C',to_date('6/10/1929','MM/DD/YYYY'),30,to_date('8/26/1967','MM/DD/YYYY'));
insert into student values (5,'D',to_date('2/10/1931','MM/DD/YYYY'),2,to_date('8/26/1943','MM/DD/YYYY'));
insert into student values (5,'I',to_date('2/10/1931','MM/DD/YYYY'),24,to_date('8/26/1962','MM/DD/YYYY'));
commit;I need a maximum date value join_date for each department. If max(join_date) has two records for each dept then max(end_date) should be considered. I have used a below select query
select * from student where join_date in (select
max(join_date) from student group by dept);which gives me the following result
1     D     1/1/1920     5     8/26/1994
1     C     1/1/1920     6     8/26/1945
2     I     8/16/1916     9     8/26/1923
2     D     8/16/1916     10     8/26/1987
3     D     7/28/1920     6     8/26/1945
3     I     7/28/1920     8     8/26/1965
4     I     6/10/1929     1     8/26/1943
4     C     6/10/1929     30     8/26/1967
5     D     2/10/1931     2     8/26/1943
5     I     2/10/1931     24     8/26/1962But I am looking for the result which gives me only one maximum value for each dept column. First it should look for maximum value of join_date, if two records has same join_date then max(end_date) should be considered. The result should be sumthing like this
1     D     1/1/1920     5     8/26/1994
2     D     8/16/1916     10     8/26/1987
3     I     7/28/1920     8     8/26/1965
4     C     6/10/1929     30     8/26/1967
5     I     2/10/1931     24     8/26/1962Can you please tell me how to rewrite the select query to get the above results.
Edited by: user11872870 on Aug 2, 2011 5:29 PM
Edited by: user11872870 on Aug 2, 2011 5:36 PM

Hi,
That's called a Top-N Query , and here's one way to do it:
WITH     got_r_num     AS
     SELECT     student.*
     ,     ROW_NUMBER () OVER ( PARTITION BY dept
                               ORDER BY         join_date     DESC
                         ,                end_date     DESC
                       )      AS r_num
     FROM    student
SELECT       dept, dep_name, join_date, years_attended, end_date
FROM       got_r_num
WHERE       r_num     = 1
ORDER BY dept
;Another way is similar to what you originally posted:
SELECT    *
FROM       student
WHERE        (dept, join_date, end_date)
               IN (
                    SELECT    dept
               ,       MAX (join_date)
               ,       MAX (end_date) KEEP (DENSE_RANK LAST ORDER BY join_date)
               FROM      student
               GROUP BY     dept
               );I suspect the first way (using ROW_NUMBER) will be faster.
Also, the ROW_NUMBER approach is guaranteed to return only 1 row per dept. Using the GROUP BY approach,if there is a tie on join_date and end_date, then it will return all contenders in that dept. Using ROW_NUMBER, it's easy to add as many tie-breaking expressions as you want, and, if there is still a tie, it will arbirarily pick one of the rows involved in the tie as #1.
Thanks for posting the CREATE TABLE and INSERT statments! That's very helpful.
Edited by: Frank Kulash on Aug 2, 2011 9:00 PM
Added GROUP BY alternative

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Data Federator not fetching data USING Netweaver BI Connector

Hi Gurus,
We have upgraded the BW system to use the Data federator.
callback ID that SAP NetWeaver BI uses to contact Data Federator has been configured as mentioned in guide.
we have already configured the CONNECTOR and we are able to test the connection in DF Designer and the connection is successful. i am able to see the list of fact tables and i am saving the data source and making it final and deployying my project .
i am using the jdbc connection and data federator strategy and the strategy is also creating the joins and classed automatically. when i export my universe and try to create the webintelligence report i am unable to see the data .even when i execute with one object and one keyfigure it is same .
even when i test my data source in designer to view the data using query tester tool it is also not able show the data it takes huge time and no data getting retrieved .
i would appreciate if you could help me with this issue
Regards and thanks
Abid

Hi,
Which version of Data Federator are you using ? Direct access to ECC table is not yet supported using Data Federator.
Jean-Pierre

Data Federator on Unix - Need to connect to Informix

Hi,
We are planning to Deploy Data Federator in Linux - SuSE 64 bit environment. We also have a need to connect to Informix and Teradata databases.
According to the supported platforms document, only ODBC drivers are available to connect to Informix and Teradata databases.
Is there a driver bridge available for these ODBC connectivity only databases?
Update: Didnt notice there were Unix ODBC drivers available. I think we should be fine.
Will it be supported if wel use the Informix Type 4 JDBC driver (http://www-01.ibm.com/software/data/informix/tools/jdbc/) as a Generic JDBC driver? Is there any performance impact?
Appreciate the assistance.
Thanks,
Thiag.
Edited by: Thiag Loganathan on Jul 21, 2010 5:43 PM
Edited by: Thiag Loganathan on Jul 21, 2010 8:26 PM

How will you access your third-party module in a NT box from UNIX? If it will be over TCP/IP, you may use the UTL_TCP package.

Workaround for NO DATA FOUND in stacked bar chart?

Hello, Ive got a stacked bar chart in the making, when one of the series doesnt have data, the whole chart show the no data found message but not the other series that do have data. Is there a workaround for this? can I catch the exception in the Series Query? Or is there any other workaround someone has tried with success???
thanks for any help or suggestion!!!

Ok, figured out a workaround based on my rusted SQL memories (its probably not the most efficient way to go), made a view like this:
CREATE OR REPLACE FORCE VIEW "VISTA1" ("NOMBRE", "TIPO_LOCAL", "TIPO", "FECHA", "OPCIONAL") AS
select USUARIO.NOMBRE, USUARIO.TIPO TIPO_LOCAL, CONSUMO.TIPO, CONSUMO.FECHA, CONSUMO.OPCIONAL
FROM USUARIO
LEFT JOIN CONSUMO
ON USUARIO.ID_USUARIO = CONSUMO.USUARIO_ID_USUARIO
on this view, i made individual selects and UNIONed them for a comeplete table, with null values being zero, just what was needed:
select null link,
LOCAL,
total "CANTIDAD"
FROM
select
count(A.TIPO) TOTAL, 'SIGO SAMBIL' LOCAL
FROM VISTA1 A
where A.tipo='3 PACK' AND A.NOMBRE = 'SIGO SAMBIL'
UNION
select
count(A.TIPO) TOTAL, 'A GRANEL' LOCAL
FROM VISTA1 A
where A.tipo='3 PACK' AND A.NOMBRE = 'A GRANEL'
etc.....
for each series, i then had to change the A.tipo value to whatever the new series should be.
regards,
Mariano.

Data Federator XI 3.0 using DB2 VARCHAR FOR BIT DATA Column?

We have a column in a DB2 database that is defined as VARCHAR(16) FOR
BIT DATA.
We are using the suggested IBM JDBC driver, db2jcc.jar, against a DB2
OS/390 8.1.5 version database.
The Datasource column displays a data type of NULL, indicating the DF
does not understand or cannot handle this IBM data type.
We have two issues.
First, target tables are not able to return any columns, regardless if
we exclude columns defined as NULL as mentioned above. We see the
'Wait' animation for a very long time when we use the 'Target table
test tool' option. Selecting to display the count only, returns zero.
We are able to fetch and view non-NULL column data when using the
'Query tool' under the Datasource pane.
I also get the same result when using the 'My Query Tool' in Server
Administrator; a selection agains the sources returns data while
selecting from a target table returns no data. Also, a 'select
count(*)' returns zero.
The second issue is in mapping a relationship between two DB2 tables
where the join is between two columns of the above mentioned type
(NULL).
The error we get back when we use "Show Errors" is "The types
'NULL' (in 'S1.PLANNEDGOALID') and 'NULL' (in 'S2.PLANNDEDGOALID') are
not compatible.". When reviewing the relationship, a dashed red line
appears instead of a solid grey line between the two tables in the
"Table relationships and pre-filers" section of our mapping pane.
The following query returns an error via the Server Administrator
Query Tool; "Types 'NULL' and 'NULL' are not compatible for operator
'=' (Error code : 10248)".
select count(*)
from
(select s1.CASEID, s2.PLANNEDGOALID, s2.NAME, s2.PLANNEDGRPSTTYCD
from "/DF_CMS_ODS/sources/CMFSREPT/CMSPROD.PLANNEDGOAL" AS s1
,"/DF_CMS_ODS/sources/CMFSREPT/CMSPROD.PLANNEDGOAL" s2
where s1.PLANNEDGOALID = s2.PLANNEDGOALID)
Here are the properties settings in the Resource Connector Settings
for jdbc.db2.zSeries we are using.
capabilities: isjdbc=true;orderBy=false
driverLocation: drivers/db2jcc_license_cisuz.jar;drivers/db2jcc.jar
jdbcClass: com.ibm.db2.jcc.DB2Driver
sourceType: db2
supportsCatalog: no
urlTemplate: jdbc:db2://<hostname>[:<port>]/<databasename>
Here are the Connection parameters as defined for the datasource in DF
Designer.
Defined resource: jdbc.db2.zSeries
Jdbc connection URL: jdbc:db2://DB2D03:50000/CMFSREPT
Authentication: Use a specific database logon for all Data Federator
users.
User Name: x
Password: hidden
Login domain: -- Choose a defined login domain --
Supports Schema: checked
Schema: is empty
Prefix table names with schema name: checked
Supports catalog: unchecked
Prefix table names with the database name: unchecked
Table types: TABLE and VIEW
So, the following is the two questions we require answers for...
Is this a limitation of Data Federator?
Is there a work around short of changing the datatype in the database.

Hi Darren,
The VARCHAR() FOR BIT DATA is a binary data type and Data Federator does not support binaries. But if in your case, it makes sense to map this column to a VARCHAR data type you can configure the DB2 connector to view this column as a VARCHAR.
Your column can be mapped explicitly to a data type of your choice using a property: castColumnType.
This property can be set updating the resource you selected when you registered you DB2 data source.
If the resource is "jdbc.db2", then:
1. Launch Data Federator Administrator
2. Click on "Administration" tab
3. Click on "Connector Settings"
4. Select the right resource: "jdbc.db2"
5. Click "Add a property"
6. Select "castColumnType"
7. Set its value to: VARCHAR() FOR BIT DATA=VARCHAR
8. Click on Ok
You should see this column as a VARCHAR.
Regards,
Mokrane
PS: For the target table issue, we have forwarded your mail to the Data Federator Designer team.

ITunes Match/iOS 7 iPhone music workaround for excessive data usage?

I just got an email from AT&T indicating I had exceeded 150GB of home data usage this month. It was because I used my home wifi to download 5000 songs to my iPhone from iTunes Match to fill it.
I'm frustrated, since it used to be so easy to make iTunes Match work for a large amount of music: In iOS 6 what I used to do (if I had to restore iPhone and set up as new phone): Plug iPhone 5 into computer, set up phone as new, check "manually manage music and videos" and "prefer 128kbps" and make sure iTunes Match was off in phone settings. Then drag & drop 5000 songs (about 40GB) from iTunes into phone. Once that was completed (a couple of hours), I could disconnect the iPhone from my Mac, turn iTunes Match to "on" in phone settings, and I'd get a message on the phone saying "All music on this device will be replaced" which is fine, but other than taking a while to update the remainder of my iCloud stored music, it used very little data.
Fast-forward to this past weekend. After updating to iOS 7.0.2 and having to do a restore and set up as new iPhone, this approach didn't work: When the step came "All music on this device will be replaced," all of the 5000 songs entirely re-downloaded all over again, which took 27 hours and burned through 40+ GB of home data (not phone data, since I was on Wifi). I kept my phone at home, plugged in and on wifi all weekend so as not to burn through all of my LTE data.
What is the deal? If I have to do this again (let's hope iOS 7.0.3 or 7.1 doesn't force my phone into recovery mode again), I certainly don't have the time or patience to let iTunes Match redownload all music again, and I certainly don't want to use up 40+ GB of home data.
Is there a workaround for this? Have others been successful transferring music via computer first and then turning on Match without problem in iOS 7.0.2? I'm sure it worked that way in iOS 6, and without completely redownloading all the music again, since that process would have taken several hours and a lot of home data, and I have not had any problems like this prior to iOS 7.

I think a better question is why do you "have to" restore your iPhone and set it up as a new device as often as you seem to? This seems to be more of a problem for you.
I followup question is why do you have iTunes Match turned on if you're syncing all your music to your iPhone?
Perhaps you should examine how you're using your iPhone and iTunes Match?
brsedu wrote:
Have others been successful transferring music via computer first and then turning on Match without problem in iOS 7.0.2? I'm sure it worked that way in iOS 6, and without completely redownloading all the music again, since that process would have taken several hours and a lot of home data, and I have not had any problems like this prior to iOS 7.
To answer this question, yes I have. It has always worked this way for me.

HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/

How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?

How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?

If you have backup of your files, you can get your call history back as long as you sync iPhone with iTunes frequently.
OK, the first thing you are required to do is close the function of "prevent iPhone from syncing automatically." in iTunes, avoiding to sync iPhone again.
Now, connect your iPhone to pc and open iTunes.
iTunes> preferences> devices
All the backup data in iTunes will be displayed.
Then,click the File menu and select Devices > Restore from Back up
your iPhone will restart and you can find them back.
This method only can find back the latest history, to get back the old, you should turn to a third party program for help.

Need clarity on data federator workarounds for BW as mentioned in threads

Similar Messages

Maybe you are looking for