Need code for the following chess game..plz help me out

Hi,
Problem:Move the chess piece "KNIGHT" from any location on a "3 x 3" Chess Board and make it go to the far right hand bottom corner.Chess Board in the problem is not the usual Chess Board of 8 x 8.KNIGHT starting position may be any position on board.Program should exit when knight moves to 3 x 3 corner.Here is how my Chess board looks.
|.... |.... |.... |
|.... |.... |.... |
|.... |.... |Queen |<<--The Queen should reach this position
Remember: KNIGHT moves in specific way such as 2 steps in one direction and 1 step left/right.If the KNIGHT starts are position (2,2) then it cannot move further and you have to throw exception with some error message.
Run command: "java <some class> x y", where x is x-coordinate and y is y-coordinate(starting position of Knight) on the chess board. For this problem x & y could be 1(min) and 3(max) values and any value(2) in between.
Deliver : 1) Send me the java code for above problem.
2) Java code should compile and run.
3) I will be interested in "Object Oriented Design" thaught process.
4) Your coding style
5) Javadoc
6) Makefile
I would be more interested in your class design, interface design and error handling.
please mail the solution to [email protected]
thanks n regards
Chinu

Hi, Here Knight moves like horse. Queen doesn't
exist. If knight moves to (3,3). Game will be over.
I am facing problem to move knight from one point
to another point. And also i have some confussion on
selecting interfaces and classes.do your own homework

Similar Messages

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Provide the java code for the following scenario.

Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..

what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No                       /                            \
Date--------------- /                                       \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no                                                 /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No                       /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1];

Need driver for the following . . .

Hi,
I have been hunting and can't seem to locate drivers for the following hardware id:
PCI\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01
Its there in the device manager as an unknown PCI device.
this seems to be the realtek card reader, and having gone trough other threads, I have tried 3-4 versions of the realtek card reader drivers. None of them have worked.
My laptop is a HP Pavillion n210se. The technical support/manual/drivers link on its product page is broken.
http://www8.hp.com/emea_middle_east/en/products/laptops/product-detail.html?oid=6762356#!tab=feature...
Can't find the model in the support/drivers download section of the global hp website.
How do I get the card reader to work? (assuming the unknown device is a card reader)
This question was solved.
View Solution.

Hi
Please find the link given below select Network and download the driver.
Driver Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Need solution for the following(Selection Screen)

Hi all,
currently iam working with report program,there i need to populate one field in the selection screen based on the another parameter in the same selection screen.
iam having field called work center as a parameter with the search help.
This search help is providing the corresponding plant for the particular work center.
Now what i need to do is,if i select the work center thru F4 help,i need the correseponding plant to get populated in the other textbox.
Currently iam having that work center field as parameter,
now i need another textbox for the plant adjacent to this workcenter textbox,in this textbox only i need that corresponding plant.
Following is the code for that workcenter textbox.
PARAMETERS:P_ARBPL LIKE CRHD-ARBPL MATCHCODE OBJECT CRAM.
Note: The Serach help CRAM is having corresponding plant with the workcenter.

Hi swaminathan,
1. If u want to DIRECTLY
   populate other fields
   based upon selection,
then we have to use our own
selection function.
2. just copy paste this code in new program.
( it will display help for BUKRS
and AS SOON AS the user selects some company code,
the other fields
get populated AUTOMATICALLY)
3.
REPORT abc.
DATA : dd     LIKE     TABLE OF dselc WITH HEADER LINE. "*--- IMPORTANT
DATA : ft     LIKE     TABLE OF dfies WITH HEADER LINE.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
PARAMETERS : bukrs LIKE t001-bukrs .
PARAMETERS : butxt LIKE t001-butxt.
PARAMETERS : ort01 LIKE t001-ort01.
PARAMETERS : waers LIKE t001-waers.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR bukrs.
   SELECT * FROM t001 INTO TABLE t001.
IMPORTANT
   REFRESH dd.
   dd-fldname = 'BUTXT'.
   dd-dyfldname = 'BUTXT'.
   APPEND dd.
   dd-fldname = 'ORT01'.
   dd-dyfldname = 'ORT01'.
   APPEND dd.
   dd-fldname = 'WAERS'.
   dd-dyfldname = 'WAERS'.
   APPEND dd.
*------- IMPORTANT
   REFRESH ft.
   ft-tabname = 'T001'.
   ft-fieldname = 'BUTXT'.
   APPEND ft.
   ft-tabname = 'T001'.
   ft-fieldname = 'WAERS'.
   APPEND ft.
   ft-tabname = 'T001'.
   ft-fieldname = 'ORT01'.
   APPEND ft.
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
     EXPORTING
      ddic_structure = 'T001'   "*----- IMPORTANT IF STANDARD STRUCT
       retfield        = 'BUKRS'
       dynpprog        = sy-repid
       dynpnr          = sy-dynnr
       dynprofield     = 'BUKRS'
       value_org       = 'S'
     TABLES
       field_tab       = ft "*---- IMPORTANT
       value_tab       = t001
       dynpfld_mapping = dd   "* IMPORTANT
     EXCEPTIONS
       parameter_error = 1
       no_values_found = 2
       OTHERS          = 3.
regards,
amit m.

Need sql for the following requirement

EMP_DT EMP_TYPE emp_id
01/01/2011               3 546
01/03/2011 4 546
01/05/2011 3 546
01/08/2011 3 546
01/09/2011 3 546
01/10/2011 4 546
01/12/2011 3 546
01/14/2011 3 546
01/16/2011 3 546
01/18/2011 4 546
01/19/2011 3 546
Hi All,
I have a table with two columns(emp date and type where date is mm/dd/yyyy type tied to employee).
This data is inserted manually through online application. But behind the scenes I would like keep this date in the following fashion by a delete sql. When run the delete sql it should keep the data in following manner with employe type order 3,4,3,4,3,4 and so on. There shouldn't be any 3 empolyee type rows continuosly. Also when delete the data it should keep the smaller date out of three same employee type dates. example 01/12/2011,01/14/2011,01/16/2011 ---> we will keep the row 01/12/2011 and delete two other dates because they are same type of dates(3).
EMP_DT EMP_TYPE emp_id
01/01/2011               3 546
01/03/2011 4 546
01/05/2011 3 546
01/10/2011 4 546
01/12/2011 3 546
01/18/2011 4 546
01/19/2011 3 546

Hi,
So, on each row, you need to know what the value of emp_type was on the previous row. That sounds like a job for LAG.
Here's one way to do that:
WITH     got_prev_emp_type     AS
     SELECT     emp_dt, emp_type, emp_id
     ,     LAG (emp_type, 1, -1) OVER ( PARTITION BY emp_id     -- Just guessing
                                               ORDER BY      emp_dt
                                ) AS prev_emp_type
     FROM    a_table
--     WHERE     ...     -- If you need any filtering, put it here
SELECT       emp_dt, emp_type, emp_id
FROM       got_prev_emp_type
WHERE       emp_type     != 3
OR       prev_emp_type     != 3
ORDER BY emp_id
,            emp_dt
;This assumes that emp_dt is a DATE (or a TIMESTAMP). If it has some other dattype, convert it to a DATE.
"DELETE" means "permanently remove rows from a table." Is that what you want, or do you just want to exclude some rows from a result set? The query above doesn't actually change the table. If that's what you want to do, you can use the query above as a sub-query in hte WHERE clause of a DELETE statement.
DELETE FROM table_a
WHERE (emp_dt, ,emp_type, emp_id)   -- Just guessing
        NOT IN (
                    WITH   got_prev_emp_type    AS
                );This assumes that emp_dt, demp_type and demp_id are never NULL.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
If you're asking about a DML statement, such as DELETE, the sample data will be the contents of the table(s) before the DML, and the results will be state of the changed table(s) when everything is finished.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using. All the code I psoted above assumes you have Oracle 9.1 or higher.

TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Need code for the problem

have to create a instance of class if that is the first instance ... successive call to create the instance should return the first instance of the class....i need the code for this pls help me .... even if the code is in C++ its ok

abhinay.is2006 wrote:
actually this was the question asked for me in a interview .... i am just a beginner to java and i am not able to get the solution ..My reply actually was a hint: google for "singleton" and you know all.
kind regards,
Jos

Need details for the following feilds

Hi Gurus,
Need mapping feild names ECC vs BI for these feilds..
1)Journal Header ID and Line Number
2)Journal Entry Line Description
3) Journal Entry Header ID and
4)Journal Entry Name
I have a requirement to send these details details to the legacy system from the BI system.
So, I need to get these deatils from the ECC and then I can transfer these details to other system.
I am unable to find these deatils on the Stanadard GL Extractor :0FI_GL_14 - GL Line Item Details.
Let me know your inputs...

Hi lakshmi,
The following links can help you on getting this information:
http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/frameset.htm
At
Nadja Xavier

I need answers for the following questions

How many maximum number of fields can be there in a table?
How many primary keys can be there in a table?
What are the ways to find out the tables used in the program?
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
What are the ways to find out the tables used in the program?
whre you will use dailog programming?
whre you will use module pool programming?
what z custom container?
whre you will be using ale/idocs?
n what r the objects u did in ale /idocs?
how to set title bar?
can we keep a tab strip in a tab strip?
how?

->>>at most 16 primary keys can b there in a table
->>>use SQL trace ST05 transaction to see tables used in a prg
->>>to set title bar use set title bar
SET TITLEBAR f.
Extras:
1. ... OF PROGRAM prog
2. ... WITH g1 g2 ... gn
Effect
Sets the title of a window.
You create these program-specific titles using the Menu Painter. If there is a text for title ID f, this is displayed in the title bar of the window, starting from the next time the screen changes.
The return value SY-SUBRC shows whether the system found an entry.
SY-SUBRC = 0:
Entry found
SY-SUBRC = 4:
Entry not found
If the statement occurs in an external subroutine, the system sets a title for the main program that called it. However, in a function module, the system sets a title for the fucntion group (but see also the addition OF PROGRAM ...).
Once you have set a title, it remains active within the transaction until the next SET TITLEBAR statement.
After SET TITLEBAR, the field SY-TITLE contains the current title.
SY-TITLE is 70 characters long. Longer titles are not permitted.
Notes
The contents of field f are converted into a value of type C with length 20 (according to the standard conversion rules). The system uses this value to search for the required title. You should therefore use a field with type C, to avoid unnecessary conversions. For example, the system would derive the key ' 9 ' from a type I field with value '9'.
You can use a namespace prefix with titles.
Addition 1
... OF PROGRAM prog
Effect
The system does not search in the GUI of the main program of the current program group for f, but in the program specified in the field prog.
Example
DATA PROG LIKE SY-REPID.
PROG = 'TESTPROG'.
SET TITLEBAR 'ABC' OF PROGRAM PROG.
This example sets the title 'ABC'for program 'TESTPROG'.
Addition 2
... WITH g1 g2 ... gn
Effect
The WITH addition allows you to use up to 9 parameters in the title. You address these in the title as variables &1 to &9. Additionally, any single & characters are replaced from left to right with the contents of the corresponding parameter (the first ampersand with the first parameter following WITH, and so on). If you want to put an ampersand as a character in your title, you must double it (&& is output as &).
If a parameter is missing, its corresponding variable is replaced by a space.
Given the maximum length of 70 characters (length of SY-TITLE), it is possible that your title can be truncated if you use WITH.
Example
DATA: PAR1(4) VALUE 'par1',
PAR2(4) VALUE 'par2'.
SET TITLEBAR 'ABC' WITH PAR1 PAR2 'par3'.
Given a title "ABC" as follows:
"Title & &1&3 some_text & &2 && & &4",
the example would produce a title bar like this:
"Title par1 par1par3 some_text par2 par2 & par3 ".
Note
You can combine both of these additions. Note, then, that the ... OF PROGRAM addition must come before WITH.
->> module pool program & dialog programs r one & the same
chk this thread same question was answered
/thread/157983 [original link is broken]
->>>go thru this link to know ALE/IDOCS
ALE and IDOCs
->>>> chkout this link for aLV custom container
ALV List and Custom Container

Need suggestion for the following Design

Hi All,
I have the following requirement to be implemented.
| |
| < Start Day << Start Week ---- End Week >> End Day > |
|____________________________________________________________________|
The above has to be on top of a table.... (i.e a table action region)
Table action allows us to have either "rowLayout" or "flowLayout" to begin with...
The "Start Day", "Start Week" and so on are actions...
Pls suggest me how to align " End Week >> | End Day > " to right (end of the table)....
PS... I am unable to plot the image properly... the " ---- " in between is just spaces.
Putting it simple, In a table action I want a button on the left most and right most corner...
Regards,
Santhosh.
Edited by: Santy on Jan 21, 2011 4:09 AM

Hi All,
I have the following requirement to be implemented.
| |
| < Start Day << Start Week ---- End Week >> End Day > |
|____________________________________________________________________|
The above has to be on top of a table.... (i.e a table action region)
Table action allows us to have either "rowLayout" or "flowLayout" to begin with...
The "Start Day", "Start Week" and so on are actions...
Pls suggest me how to align " End Week >> | End Day > " to right (end of the table)....
PS... I am unable to plot the image properly... the " ---- " in between is just spaces.
Putting it simple, In a table action I want a button on the left most and right most corner...
Regards,
Santhosh.
Edited by: Santy on Jan 21, 2011 4:09 AM

Creating a Report for the following Query u0096 Kindly help

Hi,
Using selection options we have to give the name of
1) Sales Organization -- VBAK -VKORG
2) Distribution Channel -- VBAK - VTWEG
3) Division -- VBAK -- SPART
4) Created Date -- VBAK -- ERDAT.
Once we select this the following list should be displayed.
1) Order no. -- VBAK - VBELN.
2) Created date -- VBAK - ERDAT
3) Sold To Party -- VBAK - KUNNR
4) Shipped to party -- VBPA -- KUNNR.
5) Item no -- VBAP -- POSNR
6) Material no. -- VBAP -- MATNR
7) Material Discription -- VBAP - ARKTX.
The out put should be like this
Sales Org : **********
Dist chan : **************
Division : *********
Created Date : ********
Orderno credate soltopar shiptopar itemno materiano materdes
and so.
Also When we click on the order no we should ge the transaction VA03.
With Select options i was able to get the sales organization distribution channel and division and the when we give the values it is showing Run time errors.
Kindly help me to proceed further.
Even if I am able to generate the order list it will be fine. Going on to VA03 I will manage some how If possible give the syntax for this also).
Regard,
Surjith

Hi,
Check the below code :
REPORT yvic_test_sales.
TABLES vbak.
TYPES:
BEGIN OF ty_sales_data,
 vbeln TYPE vbeln_va,
 erdat TYPE erdat,
 kunnr TYPE kunag,
 oid_ship TYPE kunwe,
 posnr TYPE posnr_va,
 matnr TYPE matnr,
END OF ty_sales_data.
DATA : gt_data TYPE STANDARD TABLE OF ty_sales_data.
 CLASS gcl_handle_events DEFINITION
CLASS gcl_handle_events DEFINITION.
PUBLIC SECTION.
 METHODS:
 on_link_click FOR EVENT link_click OF cl_salv_events_table
 IMPORTING row column.
ENDCLASS. "gcl_handle_events DEFINITION
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECT-OPTIONS:
s_vkorg FOR vbak-vkorg,
s_vtweg FOR vbak-vtweg,
s_spart FOR vbak-spart,
s_erdat FOR vbak-erdat.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT d1~vbeln
 d1~erdat
 d1~kunnr
 d2~oid_ship
 d2~posnr
 d2~matnr
 INTO TABLE gt_data
 FROM vbak AS d1
 JOIN vbap AS d2
 ON d1vbeln = d2vbeln
 WHERE d1~vkorg IN s_vkorg[]
 AND d1~vtweg IN s_vtweg[]
 AND d1~spart IN s_spart[]
 AND d1~erdat IN s_erdat[].
 CLASS gcl_handle_events IMPLEMENTATION
Subroutine call_transaction will get called
when user clicks on BELNR (Acounting document) or EBELN(PO)
CLASS gcl_handle_events IMPLEMENTATION.
METHOD on_link_click.
 PERFORM call_transaction USING row column.
ENDMETHOD. "on_link_click
ENDCLASS. "gcl_handle_events IMPLEMENTATION
END-OF-SELECTION.
PERFORM display_data.
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
DATA:
 lo_table TYPE REF TO cl_salv_table,"table object
 lo_function TYPE REF TO cl_salv_functions,
 lo_layout TYPE REF TO cl_salv_layout,
 lo_columns TYPE REF TO cl_salv_columns_table,
 lo_hotspot TYPE REF TO cl_salv_column_table,
 lo_events_name TYPE REF TO cl_salv_events_table,
 lo_click TYPE REF TO gcl_handle_events,
 ls_key TYPE salv_s_layout_key,
 lo_sorts TYPE REF TO cl_salv_sorts,
 lo_aggregation TYPE REF TO cl_salv_aggregations,
 lo_exception TYPE REF TO cx_root,"exception object
 l_text TYPE string." to hold exception message
create a table object to display result table
TRY.
 cl_salv_table=>factory( IMPORTING r_salv_table = lo_table
 CHANGING t_table = gt_data ).
catch exception
 CATCH cx_salv_msg INTO lo_exception.
get exception text and display it in message
 l_text = lo_exception->get_text( ).
Message: & & & &
 MESSAGE i000(zzz) WITH l_text.
ENDTRY.
get column object of the table created
lo_columns = lo_table->get_columns( ).
FOR HOTSPOT on Doc no
TRY.
 lo_hotspot ?= lo_columns->get_column( 'VBELN' ).
 lo_hotspot->set_cell_type( if_salv_c_cell_type=>hotspot ).
 CATCH cx_salv_not_found INTO lo_exception.
get exception text and display it in message
 l_text = lo_exception->get_text( ).
Message: & & & &
 MESSAGE i000(zzz) WITH l_text.
ENDTRY.
lo_events_name = lo_table->get_event( ).
CREATE OBJECT lo_click.
SET HANDLER lo_click->on_link_click FOR lo_events_name.
lo_table->display( ).
ENDFORM. " DISPLAY_DATA
*& Form CALL_TRANSACTION
 text
 -->P_ROW text
 -->P_COLUMN text
FORM call_transaction USING pa_row
 pa_column.
DATA ls_final_data TYPE ty_sales_data.
IF pa_column = 'VBELN'.
 CLEAR ls_final_data.
 READ TABLE gt_data INTO ls_final_data INDEX pa_row.
 IF NOT ls_final_data-vbeln IS INITIAL.
 SET PARAMETER ID 'AUN' FIELD ls_final_data-vbeln.
 CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
 ENDIF.
ENDIF.
ENDFORM. " CALL_TRANSACTION
Reward if helpful..
Thanks

Hi, i m using mac (version 10.7.4 lion) and has safari (version 6.0). The problem is that the safari is not playing some of the youtube videos for the last few days. plz help

Hi, i m using mac (version 10.7.4 lion) and has safari (version 6.0). The problem is that the safari is not playing some of the youtube videos for the last few days. kindly help

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

Problem posted for the third time! PLZ HELP! Mic not working! :)

Hey all!
My Microphone isn't working. Im useing the onboard Live 24-Bit. To this I have at 7.1 Creative Inspire TD7700 with the external decoder, connected. Im useing the Optical cable, if that have anything to do with this.
When I connect my micrphone, I cant use it at the same time that I play sounds. The difference is when I use the "Digital Output Only" function in the mixer. Here is what it does:
When DOO is on: I can play and hear all sounds, but my microphone is not working at all.
When DOO is off: I can record with the micrphone, no problem. I can create and record pretty good wave-files. But I can't hear anything.
A thin I could do is to turn DOO off, record af wave, turn DOO on, and play the file. -But how cool is that?
Besides, the primary reason that I got the mic, is that I play alot of World of Warcraft. And I want to use TeamTalk.
Therefore, isn't there a way to get both things at once, just like "in the good old days"? Plz help!

Thana, the mods/admins are on strike...just bump this question if they stop their strike...

Would anyone know how to program the Labview code for the following: Recording an analog input signal for 100msec and then repeating this 100 times in order to finally have an averaged signal (waveform)?

I have added a vi, but it doesn't quite work. Would be very grateful if someone could help, thanks!
Attachments:
Average_0411041_2.vi ‏77 KB

The attached VI collects 100 ms of data and does a rolling average. Since your sub-VI were not included I created this from scratch. There are comments in the code. I hope this is what you need.
Dirk
Attachments:
rollingaverage110x100.vi ‏47 KB

Need code for the following chess game..plz help me out

Similar Messages

Maybe you are looking for