NEED DRILL DOWN REPORTS IN APPS

Hi
I need to generate drill down reports in oracle apps.
Is drill down reports work in Apps?
If it is possible please reply me, please send any document reference on drill down reports
Thanks & Regards
Adina

Hi,
What do you mean by drill down reports in Oracle Apps. Do you mean using Reports Developer. It cant be done, that is why the need of Discoverer reports. Discoverer reports can be run ( viewer ) from applications but generally associated with a separate responsibility. You can drill down from there..

Similar Messages

Drill Down Report using Crystal reports in eclipse and jspviewer

Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
     <crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonam

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        CrystalReportViewer1.ReportSource = ("path to report")
    End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        crReportDocument.Load("path to report")
        'Bind the report to the viewer
        CrystalReportViewer1.ReportSource = crReportDocument
    End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

Drill Down Report to Summary Report Page Navigation

Hi,
I need technical input.
I have 1 summary report, which is having two columns i.e. Name, ID.Name having hyperlink which navigates to drill down level report.
How to go back from drill down level report to summary report.
Note : Using IE back button it is not full filling becz whenver user navigates the data in drill down reports
Example : In drill down report i have 200 records where i have traverese to 175 records.Where i have clicked 6 times next level page button, In this scenario where user click on the IE back button it not takes back to summary report rather than it traverse back 150 records.
Thanks in advances
Regards,
Murali

After creating the hyperlink in your ORACLE report you have to do the following
Here are the instructions
1. Open Adobe Reader 8.0 (not sure if earlier versions have an internet option.)
2. Click edit
3. Click Preferences
4. Click Internet
5. Remove check mark for Display PDF in browser
6. Click ok
7. Close Adobe Reader
8. Run your UI
9. Generate a PDF report
10. A pop-up window will appear. Check remember and then click ALLOW
11. Enter username and password (this needs to be done only once to initialize the connection between Adobe and Oracle login app)
Good luck
Carroll

Drill down report export to pdf

Hi,
I have a drill down report that i need to export to pdf.to get the drill down facility, I used 'HIDE' option for the groups.
The drill down works in crystal.But when I export the crystal report to PDF, I could not see the hidden groups/Tabs, and my drill down doesn;t work.Please suggest me what to do while exporting a drill down report to PDF. Is it possible to export a drill down report to Excel?Can someone suggest the precaustions to be taken while exporting to different formats??
Thank you,
Tatyana.

Drill-Down behavior in Crystal doesn't carry over to pdf exports.
Using one of the 3rd-party Crystal Reports schedulers listed at http://www.kenhamady.com/bookmarks.html you can achieve similar behavior in pdf exports by automating the process of:
1. exporting the main report to main pdf.
2. Bursting a detailed report to individual pdf files
3. using Crystal formulas embedded in the main report to generate live links from the exported main pdf to the individual detail pdf files.

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

Adding a characteristics to AR Drill down report for line items

I have raised an OSS note on this, but they deem this to be consulting.
I have an AR drill down report for line items
It calls the structure RFRRD20.
I need to add a value into the characteristics so I can use it in the drill down report.
I have appended the structure, added a value in TKAF for the field, and it still does not show.
Has anybody done something similar?
I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
thanks
Mark

Hi Mark
    I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
   From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
   Your suggestions would be highly appreciated.
Thanks
Vamsi

Calendar with Drill Down Report

Hello,
Everybody.
I am new to Application Express.
Please any one tell me step by step how to make calendar with drill down report.
Waiting for valuable reply.
Thanks
Rahul

Not sure if this is what you wanted, but I have links on a calendar, and when you click them, it branches to another page with details about the event.
To do this, create a calendar region. The SQL statement should have at least 2 columns: The date of the "event", and the text to display as a link. You should also choose a primary key that you want to pass to the drill down report when the user clicks. Something like this:
select hiredate date_scheduled,
          ename display_column,
          empno
   from empIn the calendar attributes of that region, there is a place to designate which column is the date, and which should be displayed. Go down a little further and set the column link. Put the page you want to show the drilldown report on, and set any variables you need to.
Hopefully that helped. Its pretty simple once you play around with it - start simple and then once you get the hang of it, make it more complex.

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

FSI0 - Drill Down Reports for Account Balance Analysis

Any orientation on this issue will be greatly appreciated.
These are the steps I did to create a new Drill-Down Report for my customer.
1. Created and modified a new Form based on the Form for the Financial Statement Analysis 0SAPBLNCE-04 (Periodic Actual vs Actual) using Transaction FSI4 (Create) and FSI5 (Change)
2. Created and modified a new Report with reference to the Form I just created using transactions FSI1 (Create) and FSI2 (Change)
3. I select "Expand: Completely" to see all Account Balances
3. All the totals match between the Original Standard Report and the new report I just created.
4. On both reports, when I select a Balance and then select the GOTO \ Line Items to get the list of documents I get the following results:
==> Most of the cases (I would say probably 80% of the cases) the Account Balance I selected matches with the Total of Line Items that is displayed when I do the GOTO \ Line Items
==> In some cases (just a few) the Account Balance does not match at all with the totals of Line Items that is displayed when I do the GOTO \ Line Items
Can somebody explain why ? Shouldn't the totals match all the time since I am specifically selecting a balance to see all its line items? Where are the missing line items?
Since these are just a few cases my customer is okay with it but he would like to hear a logic explanation why the Account Balance and its line items do not match on this report.

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

Drill down reports for new GL

Hi All
I want to assign drill down report to my PCA (New GL)report painter report( GR52). Can any one suggest some reports for drill down functionality.
Thanks

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

Drill down Reports created In SPRO to execute in SAP Easy Access

Hi
In customizing which is transaction spro, at the following location Financial Accounting->General Ledger Accounting->Information System->Drilldown Reports you can create drill down reports.
What I would like to know is where can the user execute them from in SAP Easy Access?? There is transaction FSIB (Background Processing) which allows you to execute it in SAP Easy Acces but it wants to print the report and not display it on the screen. Is there a way to display on the screen in SAP Easy Access??
Thanks in advance

Hi,
To run a report either in foreground or background you need to know the report name. To run the report in foreground goto SE38 and give the report name and execute it. If you see the status message " This report is not a type P" then goto SE93 and findout the transaction with the help of report name description. so you can run the transaction. To add the transaction to your role technical consultant will take care.
Bye,
Jyothi.

Drill Down reports for Profit Centers and Segments

Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil Kumar

Hello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar

KCA0 - Convert Aspect for drill-down report in ECC6

Hello experts,
Do you know the steps to convert an aspect (for drill-down reports) from 3.0 to ECC6? And how to add it to the list in transaction KCR0 (Execute Drill-down report). SAP has mentioned transaction KCA0 for doing a conversion after the upgrade but I am not familiar with this transaction. Please help!
Thanks and Best regards,
Chuong

Hi,
You can use all the statements in HR also.
For getting the AB values,there are macros and function modules available.
Macros:
rp-imp-c2-b2.
You need to pass b2 key values before calling macro.For eg,
MOVE pernr-pernr TO b2-key-pernr.(since u r using LDB)
MOVE year         TO b2-key-pabrj. (year you need to pass)
MOVE period       TO b2-key-pabrp. (month)
MOVE '1'          TO b2-key-cltyp.
have a look at these Function Modules also.
HR_WORK_SCHEDULE_TIMES
HR_TIME_RESULTS_GET
HR_TIME_RESULTS_IN_INTERVAL
HR_WORK_SCHEDULE_TIMES
Reward points if helpful.
Regards,
Manoj.

Creating Drill down report

HI all
i want to make Drill down report ,i created a button in the master report and used the built-in SRW.RUN_REPORT();
the problem that is it keeps telling me that the Destype for the called report must be "file", "printer","Mail",
but i need the called report Destype to be Screen ...
please can any on etell me how to make it
thanks

HI all
i want to make Drill down report ,i created a button in the master report and used the built-in SRW.RUN_REPORT();
Below is the code which i wrote,
procedure U_1ButtonAction is
begin
srw.run_report
('batch=yes
report=E:\forms\Reports\emp.rdf
destype=screen
pdeptno='||to_char(:deptno1)||'');
end;
But the prob is it is not involing emp.rdf report and so i can just see output of main report.
I would be really thankful if someone can help me in this
Thanks

Drill down reporting.

Hi friends,
I need to restrict a drill down report in Transaction KE30 (form report) to fetch all record which are NOT EQUAL to a particular billing type rest all billing types to be selected.
please help.
Lakhbir

Please take a look at the Advanced Web Publishing Whitepaper and Code (available under "sample code" tab). This concept is documented and illustrated there.
Regards
The Oracle Reports Team http://technet.oracle.com

NEED DRILL DOWN REPORTS IN APPS

Similar Messages

Maybe you are looking for