Need fields from file

I am parsing a stored procedure in my VB.NET Windows application. I read the procedure in and do a split when I come across the values "Loan."
For example, here are some of the lines:
Loan.ID=Loan.ABC
Loan.LoanNumber as 'LoanNumber'
isNull(Loan.LoanNumber,
dbo.o_func_Convertxxx(Loan.YieldToDate)
ExtractLoan.StartDate
I Want to extract the alias and the fields.
Loan.ID
Loan.ABC
Loan.LoanNumber
Loan.YieldToDate
I DO NOT want "ExtractLoan.StartDate"
How can I do this ?
Perhaps you should provide an explanation of what you are doing rather than wanting to do something this particular way. Then maybe advice and/or code on methods available to do what you want to do could be provided rather than doing that the way you think
it should be done.
Or else use XML and save information to fields in an XML file then only get the fields from the XML file that you want perhaps.
I don't use XML much but I suppose you can create Classes with Properties or just Properties and use
XML Serialization in order to save your data to an XML file. Here's a link to some
Examples of XML Serialization which may be able to assist you with that. I've found numerous information on
XML and using a variety of methods it seems like to write and read XML but it's been awhile since I've written code to do that and it would probably be confusing due to probably being poorly written even though it works.
Others that reply in this forum know XML by heart probably.
La vida loca

Similar Messages

I NEED FIELDS FROM VBFA TABLE

HI ALL,
I NEED FIELDS FROM VBFA TABLE
THE FIELDS I WANT IS :
CUSTOMER-ID
CUSTOMER NAME
CONTACT NAME
PROJECTID
ORDER NO
SALES MAN ID
ORDER PROCESS DATE
INVOICE DATE
GROSS AMOUNT
NET AMOUNT POSTAL CODE.
THANKS & REGARDS,
R.VINOD.

Hi Vinod..
Try this Code. I made all the modifications in your code .. It will solve ur issues..
REPORT zsdr_omvsa40.
TYPE-POOLS
TYPE-POOLS: slis.
TABLE DECLARATIONS
TABLES : vbak, vbkd,
zzvbak,
kna1, vbrk, vbrp, knvp .
INTERNALTABLE DECLARATION *
DATA: BEGIN OF i_vbak OCCURS 0,
vbelv LIKE vbfa-vbelv, " Sales Order no
vbeln like vbfa-vbeln, "Invoice No
erdat LIKE vbak-erdat, " Date on Which Record Was Created
kunnr LIKE vbak-kunnr,
ps_psp_pnr LIKE vbak-ps_psp_pnr, " Work Breakdown Structure Element
END OF i_vbak.
*DATA : BEGIN OF i_zzvbak OCCURS 0,
*vbeln LIKE zzvbak-vbeln,
*zssidc LIKE zzvbak-zssidc, "Salesman ID
*END OF i_zzvbak.
DATA : BEGIN OF i_vbrk OCCURS 0,
vbeln LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat, "Invoice Date
END OF i_vbrk.
DATA : BEGIN OF i_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr , " Customer Number 1
name1 LIKE kna1-name1, " Customer Name
pstlz LIKE kna1-pstlz , " Postal Code
END OF i_kna1.
DATA : BEGIN OF i_vbrp OCCURS 0,
vbeln LIKE vbrp-vbeln,
aubel LIKE vbrp-aubel,
netwr LIKE vbrp-netwr , " Net Value in Document Currency
kzwi1 LIKE vbrp-kzwi1, " Subtotal 1 from pricing procedure for condition
erdat LIKE vbrp-erdat, "Billing document.
END OF i_vbrp.
DATA : BEGIN OF i_knvp OCCURS 0,
parvw LIKE knvp-parvw , " Partner Function
kunnr LIKE knvp-kunnr ,
parnr LIKE knvp-parnr , " Number of contact person
END OF i_knvp .
DATA : BEGIN OF i_data OCCURS 0,
erdat LIKE vbak-erdat, " Date on Which Record Was Created
vbeln LIKE vbak-vbeln, " Sales Order no
fkdat LIKE vbrk-fkdat, " Invoice date.
kunnr LIKE kna1-kunnr , " Customer Number
ps_psp_pnr LIKE vbak-ps_psp_pnr, " Work Breakdown Structure Element
name1 LIKE kna1-name1, " Customer Name
netwr LIKE vbrp-netwr , " Net Value in Document Currency
kzwi1 LIKE vbrp-kzwi1, " Subtotal 1 from pricing procedure for condition
parvw LIKE knvp-parvw , " Partner Function
parnr LIKE knvp-parnr , " Number of contact person
*zssidc LIKE zzvbak-zssidc, "Salesman ID
pstlz LIKE kna1-pstlz , " Postal Code
END OF i_data.
ALV Declaraton
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
it_listheader TYPE slis_t_listheader,
gd_repid LIKE sy-repid.
Selection - Screen
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS creation FOR vbak-erdat . " Sales Order Date
SELECT-OPTIONS period FOR vbrk-fkdat . " Invoice Date
SELECT-OPTIONS order FOR vbak-vbeln . " Sales order no
SELECT-OPTIONS name FOR kna1-name1 . " Customer Name
SELECT-OPTIONS contact FOR knvp-parnr . " Contact Name.
*SELECT-OPTIONS ssid FOR zzvbak-zssidc . " Salesman ID
SELECT-OPTIONS project FOR vbak-ps_psp_pnr . " Work Breakdown Structure Element
SELECTION-SCREEN : END OF BLOCK b1.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM BUILD_LAYOUT.
PERFORM top_of_page.
PERFORM fill_listheader USING it_listheader.
PERFORM display_alv_report.
END-OF-SELECTION.
*TOP-OF-PAGE.
TOP-OF-PAGE.
END-OF-PAGE.
*& Form BUILD_FIELDCATALOG
text
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'KUNNR'.
fieldcatalog-seltext_m = 'Sold to Party'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NAME1'.
fieldcatalog-seltext_m = 'Hlev Customer'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PARNR'.
fieldcatalog-seltext_m = 'Contact name'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PS_PSP_PNR'.
fieldcatalog-seltext_m = 'Project ID'.
fieldcatalog-col_pos = 3.
fieldcatalog-do_sum = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'VBELN'.
fieldcatalog-seltext_m = 'Sales Document Type'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ZSSIDC'.
fieldcatalog-seltext_m = 'SSID'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'ERDAT'.
fieldcatalog-seltext_m = 'so date'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'FKDAT'.
fieldcatalog-seltext_m = 'inv date'.
fieldcatalog-col_pos = 7.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'KWZI1'.
fieldcatalog-seltext_m = 'gross amt'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'net amt'.
fieldcatalog-col_pos = 9.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PSTLZ'.
fieldcatalog-seltext_m = 'Postal code'.
fieldcatalog-col_pos = 10.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. "BUILD_FIELDCATALOG
*& Form DATA_RETRIEVAL
text
FORM data_retrieval.
SELECT VBFAvbelv VBFAvbeln
 VBAKerdat VBAKkunnr VBAK~ps_psp_pnr
 INTO TABLE i_vbak
FROM VBFA
INNER JOIN vbak
ON VBFAVBELV = VBAKVBELN
WHERE VBAK~erdat IN creation
AND VBFA~vbelV IN ORDER
AND VBAK~ps_psp_pnr IN project
AND VBFA~VBTYP_N = 'M' "Subsequent doc is Invoice
AND VBFA~VBTYP_V = 'C' "Prec doc is Sales order
IF NOT i_vbak[] IS INITIAL.
**Change of ORDER in SELECTS HERE
 SELECT vbeln fkdat FROM vbrk INTO TABLE i_vbrk
 FOR ALL ENTRIES IN i_vbak
 WHERE vbeln = i_vbak-vbeln
 AND fkdat IN period.
 IF NOT i_vbrk[] IS INITIAL.
 SELECT vbeln aubel netwr kzwi1 FROM vbrp INTO TABLE i_vbrp
 FOR ALL ENTRIES IN i_vbrk
 WHERE VBELN = i_vbrk-vbeln.
 endif.
 SELECT kunnr name1 pstlz FROM kna1 INTO TABLE i_kna1 FOR ALL ENTRIES IN i_vbak
 WHERE kunnr = i_vbak-kunnr
 AND name1 IN name.
*SELECT vbeln zssidc FROM zzvbak INTO TABLE i_zzvbak FOR ALL ENTRIES IN i_vbak
*WHERE vbeln = i_vbak-vbeln
*AND zssidc IN ssid .
select netwr kzwi1 erdat from vbrp into table i_vbrp for all entries in i_vbak
where erdat = i_vbak-erdat.
 SELECT kunnr parnr parvw FROM knvp INTO CORRESPONDING FIELDS OF TABLE i_knvp FOR ALL ENTRIES IN i_vbak
 WHERE kunnr = i_vbak-kunnr
 AND parvw = 'AP'
 AND parnr IN contact.
ENDIF .
SORT I_VBAK BY VBELN .
SORT I_VBRK BY VBELN .
LOOP AT i_vbrp. "Invoice Item data
 MOVE i_vbrp-netwr TO i_data-netwr .
 MOVE i_vbrp-kzwi1 TO i_data-kzwi1.
 READ table I_VBAK WITH KEY VBELN = I_VBRP-VBELN BINARY SEARCH. "Sales Order info
 IF SY-SUBRC = 0.
 MOVE I_VBAK-VBELV TO I_DATA-VBELN. "Sales Order no
 MOVE I_VBAK-erdat TO I_DATA-erdat. " Date on Which Record Was Created
 MOVE I_VBAK-kunnr TO I_DATA-KUNNR. "Customer No
 MOVE I_VBAK-ps_psp_pnr TO I_DATA-ps_psp_pnr. " Work Breakdown Structure Element
 endif.
 READ TABLE I_VBRK WITH KEY VBELN = I_VBRP-VBELN BINARY SEARCH. "Invoice header info
 IF SY-SUBRC = 0.
 MOVE i_vbrk-fkdat TO i_data-fkdat.
 endif.
 READ TABLE I_KNA1 WITH KEY KUNNR = I_VBAK-KUNNR BINARY SEARCH. "Customer info
 IF SY-SUBRC = 0.
 MOVE i_kna1-kunnr TO i_data-kunnr.
 MOVE i_kna1-name1 TO i_data-name1.
 MOVE i_kna1-pstlz TO i_data-pstlz .
 endif.
 READ TABLE I_KNvp WITH KEY KUNNR = I_VBAK-KUNNR BINARY SEARCH. "Partner info
 IF SY-SUBRC = 0.
 MOVE i_knvp-parnr TO i_data-parnr.
 endif.
 APPEND i_data.
ENDLOOP.
ENDFORM. "DATA_RETRIEVAL
*& Form DISPLAY_ALV_REPORT
text
FORM display_alv_report.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = fieldcatalog[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = i_data.
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2 .
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
ENDFORM. "DISPLAY_ALV_REPORT
FORM FOR FILLING LISTHEADER *
FORM fill_listheader USING it_listheader TYPE slis_t_listheader.
DATA : wa_listheader TYPE slis_listheader.
wa_listheader-typ = 'H'.
wa_listheader-info = 'Noel Gifts International Limited '.
APPEND wa_listheader TO it_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = 'CUSTOMER CREDIT EXCEPTION REPORT' .
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
ENDFORM. "fill_listheader
*& Form top_of_page
text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = it_listheader.
ENDFORM. "top_of_page
REWARD IF HELPFUL.

Use field from file header record in detail records

Hi,
I receive a file with different records type (transmission header, file header, detail records, file footer). The fields in each record type are different. The transmission header tells me who the sender of the file is. I need this information, because I am merging data of various senders into one table.
When processing the files, I need to split each file according to recordtype. (I can not use the same logic for each recordtype). How can I populate an extra column in the detail files with the value from the header record?
What I tried so far is the following:
- Populate a global variable using a script: This does not seem to work in the context of dataflows.
- Create a 'join' between header record and detail record. However there are no fields I can join, so Data Services is not happy with that.
- Store the field value from the header record in a DS (I chose a cache datastore, memory datastore did not work in batch scenario. I feel I can get this to work, but it seems quite an elaborate and expensive solution: First Filter the header record from the file, write the required field to the cache datastore, then read the same file but now filter the detail records, and join this with the datastore.
Is there a better way to do this? I was hoping I could just use a script and read the first line of my file and move the value to a global variable....
It would be great if someone could give me some tips...
Many thanks,
Jan.

Hi Werner,
I am not sure if I understand you correctly.
I have declared $State as a global variable, not as a parameter.
When I check my custom function I do get a warning that a variable is called which is not declared.
I thought I did not have to worry about this as the variable does exist within the job where the function is called.
It looks like I can not set a value to a global variable in a custom function.
Is that correct, or is there something wrong with my syntax?
Really the only reason I call a custom function is to set the global variable, so I could even make my function as simple as this:
$State = 'NSW';
Return 0;
It still doesn't work...
Any idea why?
Thanks,
Jan.

Urgent...... how to select few fields, from database table, (dynamic ita.)

Dear all experts,
I am able to populate all fields data from database table, using dynamic table creation.
eg,
SELECT * FROM (w_tabname) INTO TABLE <t_itab>.
where w_tabname is the table name given by the user, and t_itab is field symbol.
but some requirement is like that i need to pick up only few fields, which user will give at the runtime.
I can take those fields from file into any internal table,
but the problem is that instead of select *, i need to put selected the fields given by user.
i have tried with field symbol, it is not working (as per my knowledge.)
do i need to create any structures dynamically ?
Can anybody please help in this regards ?
Your help will be surely rewarded with points.
Waiting for reply..
Regards
Vinay

Hi Vinay ,
Adding to the below code , you can use some more fields in the select stmt as below:-
REPORT ychatest.
PARAMETERS : p_field1 LIKE dd03l-fieldname,
 P_field2 LIKE dd03l-fieldname,
 p_table LIKE dd03l-tabname.
FIELD-SYMBOLS : <fs> TYPE STANDARD TABLE.
SELECT (p_field1) (p_field2) ( FROM (p_table) INTO TABLE <fs>.
Now p_field1 & p_field2 belong to the same table since you have give the user to enter only one table name.
This should work fine.
please try & let me know .
Thanks & Regards,
Daniel

HELP! JOB ON THE LINE- Need to import fields from one document to another document

In a nutshell I have a set of documents and we now have a new structure for those documents. Either I have to cut and paste all the data from one to another or figure out how to import fields to another document.
I have two documents. Both are different but require the same information. Basically I need to have one file with fields import specified fields from another document. Ex., Name on document 1, I need the file to know to get the Name field on document 2 and import it into the specified field on document 1. I will have multiple fields that need to do this importing. I REALLY NEED TO FIGURE THIS OUT B/C I HAVE A TON OF DOCUMENTS THAT NEED TO BE COMPLETED.

If you are talking about the field structure, not the content that Bernd commented on, make a copy of the document with the fields. Open the file and use replace pages to replace the pages with the new document layout. After you have replaced the pages, you will have to select the field tools and move the fields to the proper location. If the form was made in Designer, I am not sure of the process. There is likely a similar process in Designer, but I don't use Designer and can't comment. You may have to go to the Designer forum in such a case, unless other Acrobat users here can help.

Reading fields from a text file

Hi, I'm fairly new to this so bear with me.
This is for an assignment - the idea is to cretae an online system for booking seats at a cinema - haven't got past the login stage yet?
I've got an applet that needs to read in a field from a text file.
I'm using the StringTokenizer function.
I've put a test in to check that the applet can find the file, which seems to be ok.
However, it's not reading from the file.
Te file is a simple text file - fields are seperated by a comma and a space.
Any ideas?
Please help as this is quite urgent.
Prototype Code is below
public class cinema extends Applet implements ActionListener, ItemListener{
private List ActionList;
private int listIndex;
TextArea t = new TextArea(5, 30);
private Button gobutton, writebutton, login, logout;
private PrintWriter suggestfile;
TextField Userid, password, enterField;
private int count, checkuser;
private BufferedReader firstn;
File myFile = new File("e:\\Ian\\Unistuff\\2nd Year\\se2\\cinema2\\src\\cinema2\\member.txt");
//Construct the applet
public cinema() {
enterField = new TextField("Please enter user ID and Password");
enterField.setEditable(false);
add(enterField);
Userid = new TextField(3);
add(Userid);
password = new TextField(10);
password.setEchoChar('*');
add(password);
//Initialize the applet
public void init() {
BorderLayout borderLayout1 = new BorderLayout();
//some code ommitted
t.setEditable(false);
add(t);
gobutton = new Button("Go!");
add(gobutton);
gobutton.addActionListener(this);
public void actionPerformed(ActionEvent event) {
if (event.getSource() == gobutton) {
try {
firstn = new BufferedReader( new FileReader(myFile));
catch (IOException e) {
t.setText("Member database missing - please contact Chairperson");
return;
try {
String line1;
boolean found = false;
while (( ( line1 = firstn.readLine() ) != null) && (! found))
{StringTokenizer token1 = new StringTokenizer (line1, " ,");
                          String user = token1.nextToken();
                             if (Userid.getText().equals(user))
                               { found = true;
                                 t.setText("Hello");
firstn.close();
catch (IOException e) {
System.err.println("Error Reading File " + myFile + ": " + e.toString());
Here's the text file:
Ian, Dodson, 001, rubbish
Joe, Bloggs, 002, medway
Bill, Smith, 003, unique
Guest, , Guest,
To test that it is working, it should just put a message in the Text Area, but nothing happens when you press the "go" button.

1. Your applet will not work, because it is trying to
read file from local disk.
2. This task can be solved by simple CGI script
(which is much more common and universal thing than
java), so you do not need to use java if you want to
send 3 lines to a server.
3. See examples and read some books.1. Stated the obvious.
2. This is a java forum, not Perl.
3. Pathetic and patronizing.
Very helpful.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

Need to get the values from "Signed" field from PDF form.

Hi,
This is Dinesh. I am PHP Developer. My issue is "I am not able to get the value of "signed" field from the PDF form when the form has been submitted.". I want to get the Digital Signature value of that field and i need to store it in the DB.
Please help me here Or Please forward this issue to any of the PHP developer who solved this issue and let me know.
Thanks & Regards
Dinesh

Hi Vikas,
you can use this badi MRM_WT_SPLIT_UPDATE, the method will be WHTAX_SPLIT_UPDATE
in this badi please see the importing and exporting parameters, you will get the values of withholding tax code as TE_RBWS in export parameters.
Please search in google or SCN you will get how to use it.

Is there any way to prevent fields from being overwritten when importing data via xdp-file?

In an pdf-form designed with LCD everytime the form gets merged with an xdp-datafile content of all fields get overwritten, regardless which data-binding (normal, global, none) is assigned to the fields and regardless if the fields are exluded in the xdp-datafile. Is this normal behavior and is there any way to prevent fields from being overwritten?

The xdp-file is first exported from Acrobat Professional 8 (export data as *.xdp) to get the complete structure. Then in the xdp-file some fields are removed manually and other fields are filled with data. When the modified xdp-file is opened again with Acrobat Professional 8 it grabs the original pdf-form and merges the manually filled fields into the form. With the merge all other fields in the form are overwritten, even if they are not defined in the xdp-file. And that is what I want to avoid. I want to merge the xdp-file into the form and keep the data in fields not defined in the xdp-file.

When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

Downloading fields from a View to a file

Hi,
I want to download certain fields from a View to a file.
Is there an example on SDN which shows how this can be done or is there any way to do this?
Thanks & Regards,
Yogeshwari Agashe.

Hi Yogeshwari,
Yes you can definitely do it. If I understand your problem properly, You want to save some of the entries made in an inputfield to a file?? Am I right?
If yes, then you would have bound the input field to a context value attribute. You can read the value in the context value attribute and then using the java io APIs you can write it to the file..
Regards,
Vishnu Prasad Hegde

What plug-in do I need to import file from scanner to make a batch job

what plug-in do I need to import file from scanner to make a batch job

Hi Atul,
I`m having PS Elements Ver.13 and scanner Epson V500 Photo.
Nice if your can help me.
Sten

What software do I need to view files or watch movies on my imac/time capsule, from my macbook (away from home)?

What software do I need to view files or watch movies on my imac/time capsule, from my macbook (away from home)?
imac is running lion...macbook is couple years old.
thnx

It appears you have a iPad Mini and a MacBook. Assuming that, this
About renting movies from the iTunes Store - Apple Support
says
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
This is the Mac Mini desktop forum

What cable do I need to transfer files to my 2013 iMac from my 2009 iMac?

what cable do I need to transfer files to my 2013 iMac from my 2009 iMac?
Thanks in advance,
Braden

There aren't any ports in common between both Macs except the USB, that can't be used to connect both Macs. The easiest solution is to connect both Macs with a FireWire 800 cable and get the Thunderbolt to FireWire adapter, which you will have to connect into one of the Thunderbolt ports of the 2013 iMac.
Then, to transfer files to the 2013 iMac, you have to put the 2009 iMac in Target Disk Mode, so start it holding the T key, and you will see the FireWire icon on the screen. Now, the 2013 iMac is detecting the hard disk of the 2009 iMac as an external disk, so open a Finder window and select it, under "Devices", and you will be able to transfer the data you want to your 2013 iMac.
If you have to transfer applications and settings, too, I recommend you to use Migration Assistant with both Macs connected with the FireWire cable, too > http://support.apple.com/kb/HT4889

I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Need fields from file

Similar Messages

Maybe you are looking for