Need Flash Help - configuring AIrtight Simple Viewer Pro
I need some help configuring the Airtight Interactive simple viewer pro, which requires flash. I am a complete beginner with flash, and I am reluctant to undertake the learning curve, though I am very tech saavy.
My ideal would be to locate someone who could do this FOR me, though resources are very limited for this project. Any suggestions of where I might connect with someone interested in doing this?
Alternately, I could undertake it myself, with someone qualified to coach me rather thouroughly through the whole process. That could be offline, or here where others could benefit from the thread. If someone offers this, I will post the precise details of what I need. The project is medium challenging, not extremely complex, but more than very basic.
Many Thanks.
Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.
Similar Messages
-
Airtight simple viewer in LR 3
Hey what happen to the ability to watermark the photos when using this Airtight simple viewer in web output! Why would they take that out in LR 3 it was in the beta?
The TTG Simpleviewer gallery takes watermarking into account, and is free.
http://lightroom.theturninggate.net/flash-galleries/ttg-simpleviewer-2/ -
Need some Help configuring sip
Hi all ! ,
Im kind off new to sip calling and cisco telephony , but here goes ,: i have a 2821 router with CME installed
IOS : C2800NM-IPVOICEK9-M
Sofware version : 15.1(4)M4 / CME 8.6
Attached to GE0/0 is a CISCO 3750 switch
GEO - consisfts of 3 VLANS , the native
172.22.1.X
172.22.100.X VOICE
172.22.101.X DATA
my tftpserver = 172.22.1.150
i need some help configuring a sip trunk , i have 10 testing phonenumbers from vodafone , but i do not know where to start to get this working
i have tried
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml
but im getting stuck with what to fill in where .. is there anyone form NL whom has the same setup ? or similar ? or can give me some guidance on how to make the test callsok.. here goes
Building configuration...
Current configuration : 9721 bytes
! Last configuration change at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
clock timezone CET 1 0
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 E1 0/0/0
network-clock-select 2 E1 0/0/1
dot11 syslog
ip source-route
ip cef
ip dhcp pool VOICE
network 172.22.100.0 255.255.255.0
option 150 ip 172.22.1.150
default-router 172.22.100.1
ip dhcp pool DATA
network 172.22.101.0 255.255.255.0
default-router 172.22.101.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-net5
voice service voip
ip address trusted list
ipv4 172.22.1.50
ipv4 172.22.1.51
ipv4 172.22.100.1
ipv4 172.22.101.1
ipv4 62.140.159.225
callmonitor
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
registrar server expires max 3600 min 3600
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice register global
voice translation-rule 1
rule 1 /5123781291/ /601/
rule 2 /5123781290/ /600/
voice translation-rule 2
rule 1 /^112$/ /112/
voice translation-rule 3
rule 1 /^.*/ /0262610290/
voice translation-rule 4
rule 2 /600/ /5123788000/
rule 3 /601/ /5123788001/
rule 4 /^2(..)$/ /51237812\1/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
voice translation-profile PSTN_CallForwarding
translate redirect-target 4
translate redirect-called 4
voice translation-profile PSTN_Outgoing
translate calling 3
translate called 2
translate redirect-target 4
translate redirect-called 4
voice-card 0
crypto pki token default removal timeout 0
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31
controller E1 0/0/1
framing NO-CRC4
pri-group timeslots 1-31
ip ftp username cisco
ip ftp password cisco123
ip tftp source-interface GigabitEthernet0/0.1
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
no keepalive
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
ip address 172.22.1.51 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 172.22.101.1 255.255.255.0
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address 172.22.100.1 255.255.255.0
interface GigabitEthernet0/1
no ip address
shutdown
duplex full
speed 100
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface Serial0/0/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http max-connections 16
ip http path flash:gui
ip route 0.0.0.0 0.0.0.0 172.22.1.50
tftp-server flash:7941/apps41.8-4-1-23.sbn alias apps41.8-4-1-23.sbn
tftp-server flash:7941/cnu41.8-4-1-23.sbn alias cnu41.8-4-1-23.sbn
tftp-server flash:7941/dsp41.8-4-1-23.sbn alias dsp41.8-4-1-23.sbn
tftp-server flash:7941/jar41sccp.8-4-1-23.sbn alias jar41sccp.8-4-1-23.sbn
tftp-server flash:7941/cvm41sccp.8-4-1-23.sbn alias cvm41sccp.8-4-1-23.sbn
tftp-server flash:7941/SCCP41.8-4-2S.loads alias SCCP41.8-4-2S.loads
tftp-server flash:7941/term41.default.loads alias term41.default.loads
tftp-server debug
control-plane
voice-port 0/0/0:15
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/0/1:15
voice-port 2/0/0
voice-port 2/0/1
voice-port 2/0/2
voice-port 2/0/3
voice-port 2/0/4
voice-port 2/0/5
voice-port 2/0/6
voice-port 2/0/7
voice-port 2/0/8
voice-port 2/0/9
voice-port 2/0/10
voice-port 2/0/11
voice-port 2/0/12
voice-port 2/0/13
voice-port 2/0/14
voice-port 2/0/15
voice-port 2/0/16
voice-port 2/0/17
voice-port 2/0/18
voice-port 2/0/19
voice-port 2/0/20
voice-port 2/0/21
voice-port 2/0/22
voice-port 2/0/23
mgcp profile default
dial-peer voice 1 voip
description **Incomming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
session protocol sipv2
session target ipv4:172.22.1.50
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 2 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9........
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 3 voip
description **Outgoing Call to SIP Trunk **
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 4 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[0-1][2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 5 voip
description **911 Outgoing Call to SIP trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 6 voip
description **Emergency Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 7 voip
description **911/411 Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]11
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 8 voip
description **International Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9011T
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 9 voip
description **Star Code to SIP Trunk**
destination-pattern *..
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 10 voip
description **CUE Voicemail**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 600
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 11 voip
description **CUE Auto Attendant**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 601
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
sip-ua
authentication username 0262610290 password 7 15020A1F173D24362C realm 62.140.1
59.225
authentication username 0262610290 password 7 021605481811003348
no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar ipv4:62.140.159.225 expires 3600
sip-server ipv4:62.140.159.224
host-registrar
telephony-service
max-ephones 58
max-dn 192
ip source-address 172.22.100.1 port 2000
calling-number initiator
system message testing
cnf-file location TFTP tftp://172.22.1.150/
load 7960-7940 P00307020200.loads
load 7941 SCCP41.8-4-2S.loads
load 7941GE SCCP41.8-4-2S
time-format 24
dialplan-pattern 1 26261029.. extension-length 3 extension-pattern 9..
voicemail 600
max-conferences 12 gain -6
call-forward pattern 9.T
moh music-on-hold.au
web admin system name admin password password
dn-webedit
time-webedit
transfer-system full-consult
secondary-dialtone 9
directory entry 1 101 name 101
create cnf-files version-stamp 7960 Jan 02 2014 08:40:49
ephone-dn 1
number 290 secondary 0262610290
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 291 secondary 0262610291
name phone 2
hold-alert 30 originator
ephone-dn 3
number 292 secondary 0262610292
name Phone 3
hold-alert 30 originator
ephone-dn 4
number 293 secondary 0262610293
name Phone 4
hold-alert 30 originator
ephone-dn 5
number 294 secondary 0262610294
label Phone 5
hold-alert 30 originator
ephone 1
mac-address 0019.E88F.3BDD
button 1:1
ephone 2
mac-address 001E.4A92.0A27
type 7961
button 1:2
ephone 3
mac-address 0012.43F5.03AF
button 1:3
ephone 4
mac-address 000F.F7AC.502A
button 1:4
ephone 5
mac-address 0019.E851.090A
button 1:5
line con 0
line aux 0
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
ntp master
end -
Need some help using BootCamp on MacBook Pro 2011
Hello,
I have just bought a CD which is not compatible with MacBook's, and can only use Windows operating system. I have been direceted to use the BootCamp application, when I load the app, it comes up with two options, to download something or buy Windows 7, which I dont have, therefore I chose the first option. I was told to put in a USB drive in, which I have done, and a load of files have been downloaded to my USB drive, but what do I do next?
Thanks.As you are using OS X Mountain Lion and looking at the MacBook Pro you are using, you can install a 64-bit Windows 7 or 8 version, but you can't use Windows XP or Windows Vista. If you haven't got Windows yet, buy Windows 7 on a DVD in Amazon or eBay, or Windows 8 from the Microsoft Store or Amazon (make sure that you buy it on a DVD).
What you have downloaded to your USB drive are the Boot Camp drivers. Those drivers are for all the hardware of your Mac, because Windows doesn't detect everything, so you need those drivers to run Windows properly and get the maximum performance of the MacBook Pro. You have to install them just after installing Windows.
If you need help installing Windows with Boot Camp, see > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf -
HT1752 need some help with a '07 macbook pro
need help with my wifes old MacBook pro she had found it during our last move apple said its vintage and they couldn't help
Please indicate what problems you have encountered and provide as much detail as you can. The exact model of the MBP and the Operating System would be useful pieces of information.
Ciao. -
Company that helps Mexican street dogs needs flash help!
I live in the mountains in Mexico and am having a really hard time finding a Flash programmer. There are just indians and Zapatistas here. I bought an e-commerce template and designed everything how I wanted it, but it's not working.
I cant' make the combo boxes on my shop.fla page work. Actually I'm not even sure if the xml (products) is working correctly with it. This page is kind of a mess. The add to cart button never works either.
I also can't figure out how to make the slider work with my text on the faqs.fla.
In my preview.fla, I want to make the menu buttons more visible (white would be fine), but don't know how.
I don't want to preloader to cover the header "get involved" when it loads. I know I need a new xml page to link with it to fix this, but I know nothing about xml.
Also what is the standard height I should make the preview page so that it shows the whole page in the browser.
Any help would be greatly appreciated and it's for a good cause. Please help if you can. Thanks. Plus if you want I'll send you a handmade leather dog collar. Gracias.
http://jessiepollak.com/losperros/ecommerce-template-source/
Jessiehey elgin -
1) flash6 will be using AS1, AS2 wasn't introduced until
flash7.
2a) to assign a 'handler' to a button, on the main timeline,
create an new layer, call it 'actions'. then place the codes you
need for each button on that layer. it will look something like
this:
my_btn1.onPress = function() {
//do whatever here
2b) however you need additional functionality for the second
button, because you want two things to happen, a) initiate the
transition is the 'skip' button hasn't been pressed, and b) cancel
the 'timers' action if the button does get pressed. but even if the
first button is pressed we should still assume that the interval
should be terminated, so we would wnat to make sure that that
happens as well.
for this you would use a 'setInterval' method (which will act
like a timer) but we also need to 'stop' the interval once it fires
or if the button is pressed, so we would do so by calling:
clearInterval(var); the 'var' is the ID of the interval that were
starting up.
So now we need to apply these things all together, so in the
first frame of your new 'actions' layer, the code would be all as
follows: -
Need conceptual help for a simple drag n drop game
As anyone who saw my previous thread knows, I'm trying to make an educational app prototype (I'm new to Flash, this is for a Masters in education) to help students learn IPA symbols (phonetics). I have successfully made a section where the students click on symbols to hear the corresponding audio and listen to explanations.
For the final part of the prototype, I have to create some kind of instructional game. My idea is to have 12 circles, each one playing an audio file of a vowel sound (this I know how to do). The students will have to click the circles to listen and then drag and drop them to the correct IPA symbol. Flash would then give feedback on correct/incorrect answers and a score. Maybe all of this is against the clock, needing a timer.
So, I need to learn drag and drop. What else to I need to learn so that one drop position is considered "correct", the others are considered "incorrect" and a score is given at the end? And maybe a timer?)
Any conceptual help gratefully received!!
DarrenCheers for the reply.
Yes, I have heard of this Google you speak of The thing is, sometimes as a beginner you can't see the wood for the trees and I find mountains of info when I search, it's hard to know which direction to do in. As for drag & drop I had already found good tutorials on that, it's more the other concepts that need to be employed that I would like information on.
I'll look into the getTomer() function, sounds just what I need.
As for the scoring correct/incorrect answers, i found a wonderful example on flashkit.com, which would basically solve all my problems if I learn how to adapt it. The trouble is it was made in Flash 7, I'm on CS4.
How many changes would I need to make to the code to turn it into AS3?
Cheers everyone
Darren
(EDIT: I pasted the code and now it looks weird. I used SQL syntax highlighting on this page, maybe somebody could tell me how to past code and get it looking correct?)
myAnswers = [[1, 1], [2, 2], [3, 5], [4, 4]];
function doDrop(dragSprite, numTargets) {
for (i=1; i<numTargets+1; i++) {
if (_root[dragSprite].hitTest("_root.q"+i)) {
if (_root["q"+i]._currentframe<>2) {
_root[dragSprite]._x = _root["q"+i]._x+5;
_root[dragSprite]._y = _root["q"+i]._y+2;
_root["q"+i].gotoAndStop(2);
} else {
_root[dragSprite]._x = _root[dragSprite].stx;
_root[dragSprite]._y = _root[dragSprite].sty;
function clearDrop(dragSprite, numTargets) {
for (i=1; i<numTargets+1; i++) {
if (_root[dragSprite].hitTest("_root.q"+i)) {
if (_root["q"+i]._currentframe == 2) {
_root["q"+i].gotoAndStop(1);
break; -
Hello. I am new at Flash so action scripting is not so
simple. I have an action script that is not stopping my clip at the
last image and when it starts the clip, it starts with the last
image. Please let me know where I should place STOP() or can you
refer me to someone or someplace where I can get immediate help.
Please see the attached coding and let me know how I should
fix it or what I should add, I tried placing STOP at the bottom of
the coding but it didn't work. Thank you for your help.Hi. The actionscript is from a Flash Mask Effect template
that I was asked to make image and text changes to. I don't know
what the repetitive aa and bb does. The clip works well except that
I can not get it to Stop after the last image, it just keep going
and going...
Thanks. -
Help Configuring my New Mac Pro
I just purchased a new Mac Pro (early 2009 Quad Core" 2.66 (2009/Nehalem), and a second (1 TB) internal hard drive. I would like to transfer my applications, files, and profile from my Macbook Pro (early 2008 Core 2 Duo" 2.5) to the Mac Pro. I also want to install with Boot Camp a copy of Windows XP Pro (SP3) on a separate hard drive. I want the XP drive to be the 640 GB hard drive that came with the Mac Pro, and the MacOS drive to be the added 1TB hard drive. I want the Windows drive to have 4 logical partitions ( C, D, E, and F) with the C, D, and E being NTFS (so they can exceed 32GB) and, F drive being FAT (for read/write compatibility with MacOS). I've been doing a fair amount of reading both on this forum and have a tentative plan to accomplish the setup. But, a lot of what I'm planning to do is new to me. So, before executing my plan, I wanted to get some feedback. Any thoughts or comments on the steps in my plan would be much appreciated. Here are my planned steps:
1. Turn on the new Mac Pro computer but don't transfer and applications or files - just transfer the profile. Then check to make sure that the computer is working properly.
2. Turn off computer and install 1 TB hard drive and RAM upgrade.
3. Turn on the computer and transfer applications and files from my Macbook Pro to the Mac Pro using Migration Assistant (located in the applications, utility folder). Connect the computers using Firewire 800 (9 pin to 9 pin cable). I currently don't have such a cable, but from what I have read the migration can be very, very slow if done using the ethernet network or a USB-2 cable. I've got about 200 GB on my Macbook Pro so I assume that the Firewire cable is the only sensible way to go.
4. Test the system to see that the applications are working and check that the data files have been transferred.
5. Download SuperDuper and use it to create a clone of the 640 GB drive on the new 1 TB drive. Make the 1 TB drive the boot drive by choosing it from System Preferences > Startup Disc
6. Check and make sure the bootup from the 1 TB drive works properly.
7. Check to make sure the EFI Boot ROM version on the Mac Pro is up to date. If it needs updating, download latest version from Apple support website and install.
8. Check Apple support for updates to Boot Camp Assistant. Once I have the latest version open Boot Camp Assistant (in the Utilities folder in the Applications folder). Create Boot Camp partition that is the entire 640 GB hard drive.
9. Insert the Windows XP CD and click Start Installation in Boot Camp Assistant. Select the Boot Camp partition for installation of Windows.
10. As I begin the Windows install, I'm expecting that I will be offered at the start of the setup process an opportunity to create the 4 separate logical partitions that I want on the 640 GB hard drive. Format the hard drive with the 4 partitions.
11. Select the partition where I want to put Windows Operating System and follow the Windows setup process to install Windows XP.
12. Once Windows is installed, eject the Windows disc and insert to Mac OS disc. Install the Boot Camp drivers for Windows.NTFS is read only already. You don't need anything just to access, only if you plan to write files, and NTFS won't like HFS file names if they have special characters.
XP SP2 or later, and would have to be able to transfer to new hardware. What it lacks is good multicore and memory management.
Newegg and Amazon has single system builder versions that can save but can't be used on another system. OEM (Dell, HP, etc) versions or "restore discs" won't work and aren't supported.
I said you can get by without BCA. You don't have to believe me but it is a waste to have to say everything twice. Windows 7 is perfectly capable of doing any formatting and installing without it.
Installing Windows 7 on Mac Pro is easier and different. There is a forum devoted to Boot Camp and Installing Windows.
http://discussions.apple.com/category.jspa?categoryID=237 -
Hi, In need of help creating a simple effect to image.
Attached is an image which shows more or less the effect I am needing to achieve.
http://i303.photobucket.com/albums/nn149/Jaybeedubya/FotoliaComp_635945_xs3N3VFLwPNTIOm1.j pg
I created the image above by desaturating the colour image of the man and then adding a new purple layer and selecting 'vivid light' from the layer palette drop down box. In doing this the man became purple but the white area surrounding him stayed white...I then adjusted the layers on the first layer so that the white part became purple - the final result is what you see in the attached image.
The problem is this - I need to create this effect for 15 or so images all with a specific purple pantone colour, I need to create these for print ready artwork. All the pictures (ie the man) I will be using, need to look the same kind of shade. The way I was creating these before was to adjust the bottom layer so its grey rather than white so that the white area becomes purple.
Confusing huh, If you dont understand my question (and I dont blame you!) then all I need is to create a set of 15 images that look like the attached image (using a specific pantone) but I have no idea how the best way to do it is.
How would you guys achieve that? Any help greatly appreciated.So its gonna be a two-color-job?
Because with the extreme depths adding Black at least might be beneficial.
You could make a Selection of a black&white-version-of-the-photographs luminance, inverse it and, in the Channels-Panels PopUp-menu, choose Add New Spot Channel for the Foreground color and select the Pantone color.
Then Add New Spot Channel for the background-color and fill that solid black and hide the layers that contain the composite of the photograph.
This should leave You with blank composite channels and the two Spot Channels visible.
Indesign can handle either psd- or DCS2-files containing Spot Channels.
The problem I perceive here is that depending on the print-process and the background color selected it might proof necessary to knock out the foreground elements if the company is very strict on their CI colors. Unfortunately simply inversing the foreground selection would probably not work as this might leave the mixed-color-areas greyish.
Are the prints gonna be offset or silkscreen? -
I NEED FLASH HELP/ NOT SEEING SOME SITES
I have a dell computer with a ati2400 video card. I
have three browsers, IE7, firefox3.0, k-meleon. I had Opera,but had
to unistall it because it would play only 80% of the flash videos
yet fiefox and k-meleon played them all I installed k-meleon after
uninstalling opera. I installed flash player 10.0123 for mozilla
browsers on saturday and everything was fine. Today I found that
all my browsers would only show about 85% of flash videos. I'm
freaking out because IE7 is a different flash plugin than firefox.
This is what i found when I scanned flash players. I have the
upgrade plugin for mozilla browsers 10.0,0.12, then I have two
flash plugins 9.0.124, one flash player Helper 9.0.115, and two
NPSWF32_FLASHUTIL.
I am at a loss when it comes to flash players. I upgrade
when I get a notice, but I know your not supposed to have more than
one player for mozilla browsers and one for microsoft browsers?
Right? Is this why now i have the same problem as i did with my
opera browser? I tried a system restore to before the flash upgrade
10.012 was installed and nothing changed, i still had the same
problem. HELP, What gets uninstalled, what stays and will this take
care of my flash problems? I spent months with the Opera problem
and read on opera and firefox forums people who had flash problems
say they uninstalled and reinstalled flash and no change. Sorry
about the long post, I'm very sick and this is the best i can
do.Hi. The actionscript is from a Flash Mask Effect template
that I was asked to make image and text changes to. I don't know
what the repetitive aa and bb does. The clip works well except that
I can not get it to Stop after the last image, it just keep going
and going...
Thanks. -
Need urgent help in a simple java program that adds up even numbers and..
The task is to write a program that allows the user to enter 8 integers and then displays the sum of the odd integers and the product of the even integers
what i did so far is
public class Computation
private int n;
private int even;
private int odd;
public Computation()
even =0;
odd = 1;
public Computation(int num1, int num2, int num3,int num4,int num5,int num6,int num7, int num8)
n = num1;
n = num2;
n = num3;
n = num4;
n = num5;
n = num6;
n = num7;
n = num8;
for(int i=0; i<=n; i++)
if(n%2 == 0)
even += n;
else
odd *=n;
public int getEven(int n)
return even;
public int getOdd()
return odd;
import java.util.*;
public class Tester
public static void main(String [] args)
System.out.println("Enter any three words");
Scanner input = new Scanner(System.in);
int num1 = input.nextInt();
int num2 = input.nextInt();
int num3 = input.nextInt();
int num4 = input.nextInt();
int num5 = input.nextInt();
int num6 = input.nextInt();
int num7 = input.nextInt();
int num8 = input.nextInt();
Computation compute = new Computation(num1, num2, num3, num4, num5, num6, num7, num8);
System.out.println("The Summation of the even numbers is: " + compute.getEven( ) + "\n" +"The product of the odd numbers is: " + compute.getOdd());
}The result i get is always zero.. however, i think the problem lies in the first class when i constructed the numbers and sat them all to one object "n",
i need help in fixing this bug,,
thanks7uSamx wrote:
Can you illustrate by a small example please ?Any small example would already contain pretty much the entire code.
You know how to declare a method, right? You have several in your code, so I assume you do.
You already know how to check if a given variable is even or odd. You already showed that code, so I assume you do.
Now put those two together and you'll have a method that decides if the value passed to it is even or odd.
Now put the desired action in each of the branches of the if-statement and you're almost done.
Now call the method with each method from your constructor and you're done. -
I'm redesigning my website. There are some simple flash components. If I show you what I want, can you tell me how to get it?
May I phone you, then show you the design? Or you can phone me - as you wish. [contact info removed] Stamford, CT Eastern Zone
Thanks.One of the ways to achieve this is using LoadVars.
Sample usage:
http://www.gskinner.com/blog/archives/000073.html
http://www.adobe.com/support/flash/action_scripts/actionscript_dictionary/actionscript_dic tionary427.html -
HELLO EVERYONE I AM NEW TO THIS LOGIC PRO 8 PROGRAM YES OF COURSE I GOT A MAC AND I WAS JUST WONDERING A FEW THINGS:
HOW DOES THE PIANO ROLL WORK?
HOW DO I RECORD WITH IT?
WHAT ARE THE NEEDS FOR ALL THE PROJECTS IF I WANNA COMPOSE RNB WHICH DO I CHOOSE?
AND ALSO WHAT INTERFACE IS COMPATABLE I AM USING A FANTOM X6 AS WELL HOW DO I HOOK IT UP TO MY LAPTOP?HOW DOES THE PIANO ROLL WORK?
Hmm...yes. I think you took the right pill.
HOW DO I RECORD WITH IT?
Every tuesday, between one and three.
WHAT ARE THE NEEDS FOR ALL THE PROJECTS IF I WANNA COMPOSE RNB WHICH DO I CHOOSE?
I believe that's a swedish car.
AND ALSO WHAT INTERFACE IS COMPATABLE I AM USING A FANTOM X6 AS WELL HOW DO I HOOK IT UP TO MY LAPTOP?
I think it was the butler but I'm not sure. -
M
y CS5 Bridge does not hae this option in the templates. Hoe do I find it?The TTG Simpleviewer gallery takes watermarking into account, and is free.
http://lightroom.theturninggate.net/flash-galleries/ttg-simpleviewer-2/
Maybe you are looking for
-
Budget error while issuing stock to the project based production order
Ours is project based Engineering company, we mfg euipments for the client which is part of the project. We define separate WBS element for equipment to be manufacture & create reservation under this WBS element. Secondly we follow production process
-
Build dynamic SQL query in Database Adapter.
Hi All, I have a requirement to build dynamic sql query at Database Adapter. My BPEL process is getting search spec as input from siebel. I need to process this searchspec in BPEL and need to build the SQL query dynamically at Database Adapter to fet
-
Solution that worked for iPad connection to "n" nework!
So, reading of the many wireless issues with the iPad, specifically connecting to, and maintaining a stable connection to an 802.11'n" network, I decided to do some research. Many solutions here, suggest altering the radio mode to "g" only, as this i
-
NW7.5sp07: Memberset(BAS) not working in Script Logic
Hi, I wrote one simple script : *XDIM_MEMBERSET G_FLOW=F_CLO *XDIM_MEMBERSET G_DATASRC =BAS(CMTTOT) *XDIM_MEMBERSET DC_ACCT=DA_CE0120000 *XDIM_MEMBERSET DC_FDETAIL=ALL *DESTINATION_APP=FINANCE *ADD_DIM CONSOLVIEW=NONGROUP *RENAME_DIM DC_ACCT=G_ACCT *
-
Limited Connection/Local Only
we recently installed a new wireless linksys router. every computer is connecting fine, however, my HP Pavilion Slimline desktop is only conneting "local only access" . I do not use an ethernet cable to connect to the router. help