Need header part with fields to be repeated

Hi,
How to print the header with fields that should be repeated in each page. i want to display the report in the following format
Header data(po number)
body (item details)
footerdata.(instuctions)
Header data will contain the fields also that should change in every page.
Thanks

Hey,
if you work with the RTF Template Builder and Microsoft Word to layout your report you either can use a table and place your po number in the table header; this will be repeated on every new page by default.
Or you put your po number in the page header, this will also be repeated automatically. Since you cannot use Word's form fields in page header or footer you have to write placeholders at your own! For example if your field is MY_FIELD than simply write <?MY_FIELD?>. Also have a look at chapter "Defining Headers and Footers" in the BI Publisher Report Designer's Guide.
HTH,
Stefan

Similar Messages

  • Download to Excel with Header but one field data is repeating

    Hi All,
    I'm downloading to Excel with Header. But One field is repeating and another is not. This is happening only when I use   'CONCATENATE ' . With Out this key usage data download to excel is correct. But   CONCATENATE is required as constant need to add before the one field.
    My coding is as below.
    DATA: BEGIN OF IT_FINAL OCCURS 0,
          P1(10) TYPE C,
          SI(19) type c, 
            END OF IT_FINAL.
    DATA : BEGIN OF IT_HEADER OCCURS 0,
    TITLE(100) TYPE C,
    END OF IT_HEADER,WA_HEADER LIKE IT_HEADER.
    loop at it_final.
      CONCATENATE '894412' it_final-SI INTO IT_FINAL.
    modify it_final.
    endloop.
    CLEAR:WA_HEADER.
      WA_HEADER-TITLE = 'Mat No'.
      APPEND WA_HEADER TO IT_HEADER.
      CLEAR:WA_HEADER.
      WA_HEADER-TITLE = 'Serial'.
      APPEND WA_HEADER TO IT_HEADER.
    CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
        EXPORTING
          FILE_NAME  = P_FILE " path offile where u need to download
        TABLES
          DATA_TAB   = IT_FINAL
          FIELDNAMES = IT_HEADER.
    CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
        EXPORTING
          FILE_NAME  = P_FILE " path offile where u need to download
        TABLES
          DATA_TAB   = IT_FINAL
          FIELDNAMES = IT_HEADER.
    Excel OUT PUT:
    Mat No            Serial
    11Z52321     8944126000
    11Z52394     8944126000
    11Z52395     8944126000
    Thank You,
    Pranitha

    hi,
    it would have been better if u hve opt for creating workarea for ur internal table.
    Try to use "clear it_final" after
    CONCATENATE '894412' it_final-SI INTO IT_FINAL.
    n also change the modify statement :
    modify it_final transporting SI .
    hope this will surely help you
    Regards,
    Punit
    Edited by: punit raval on Aug 26, 2011 2:55 PM

  • Need infotype along with field name

    Dear Experts,
    Can anyone please tell me the Infotype & Field name from where the following fields can be fetched.
    Location
    Designation
    Department
    Division
    company
    Date of joining
    date of confirmation
    gross salary(if yes which salary type i have to select).
    Please tell me soon as i need to finish the development.
    Kind Regards
    Sajid

    Hi Sajid,
    Requested information is found in IT0001 and IT0041.
    Location  :    PA0001-WERSK or PA0001-BTRTL
    Designation  : PA0001-PLANS
    Department  : PA0001-ORGEH
    Division       :  May be PA0001-WERKS
    company    : PA0001-BUKRS
    Date of joining     : PA00041
    date of confirmation : PA0041
    gross salary(if yes which salary type i have to select).
    Get the confirmation from your Functional consultant.. He is the best person to give you the accurate information.
    Regards,
    Narendra.

  • VA01 Sales order - Header-- Accounting tab need to add a field

    Dear All,
    The requirement is,
    1. I need to add a field in Sales order.
    Path for the same is as follows:
    VA01> Goto> Header--> Accounting tab
    2. The field will be a date field that needs to calculate date on.
    a)create a new field. ex - zchdt (chq due date)
    b)when customers enters value in Assignment,
    i.e vbak-zuonr
    after that trigger logic is
    3.vabk-kunnr = knvv-kunnr
    a)sy-date + knvv-kvgr2 (exclude sundays)
    example - 14 sept + 30 days = 14th october
    should populate value - 14th october i.e. field (zchdt)
    4. This activity needs to be triggered before the sales order is saved.
    kindly know whether this is possible or not.
    if possible how & which exit & also with example code.
    if you could give me your contact(cell no).
    Regards,
    Nagendra D.S.
    Mobile - +91 9819899082

    Hi All,
    VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
    when customer enters value in Assignment i.e zuonr & after that trigger logic is
       1.     vbak-kunnr = knvv-kunnr
       2.     sysdat + knvv-kvgr2 (exclude sundays)
    example - 16 sept + 30days = 16 oct
    in field zchdt value 16 oct as to populate
    Pls help me in the code.
    Regards
    Nagendra

  • Issue with parts of a form that repeat with a button

    I have added several parts to a form that a user can click to add a new item.  The parts are tables that have rows that repeat that are added by clicking a button.  This addition of rows works fine.  However I am having two issues that I need some assistance with....
    1.  I have added a table nested within a table.  Rows added as a user clicks to add a row.  This works fine up to eight rows.  Rows beyond eight do not flow to the next page.  They seem to be added at the bottom of the second page of added rows (can't see them to know if they adding).
    2. The same table, when adding rows, creates rows over a separate table below it.  I am not sure why the next table does not get pushed down by adding rows to the table above it.
    I am a LiveCycle newbie so any help would be greatly appreciated.
    Thanks.
    Shane

    The subform is not Flowed in the form.. Select the root node (for Example Page1) in the Heirarchy and set the Type to Flowed to address both the issues.
    If your Table is wrapped in a Subform, make sure for the Subform you have checked the "Expand to Fit" for Height in the Layout tab.
    Thanks
    Srini

  • I need a report with the following fields

    Hi All,
    I need a report with the following fields & G/L "Expenses" only.
    1)G/L Code.
    2) G/L Name.
    3) G/L Balance
    & Selection Criteria From Date, To Date , & Location(for me locations is PROFITCENTRE).
    Please some body suggest me an SQL Querry to fetch this result.
    Thanks in Advance,
    S. Mobin

    Hi!
    Individual G/L means i didn't understand
    check this for only Expence Acc
    Declare @FromDate Datetime
    Declare @ToDate Datetime
    Declare @Location nvarchar(20)
    set @FromDate = (Select min(S0.RefDate) from jdt1 s0 where s0.Refdate >='[%0]')
    set @ToDate = (Select max(S1.RefDate) from jdt1 s1 where s1.Refdate >='[%1]')
    set @Location = (Select max(s2.ProfitCode) from jdt1 s2 where s2.ProfitCode  = '[%2]')
    select
    J1.Account,
    max(A0.AcctName) as Name,
    j1.ProfitCode as Location,
    sum(J1.debit-j1.credit) as Balance
    From
    JDT1 J1,OACT A0
    Where
    J1.Account=A0.AcctCode and
    J1.RefDate >=@FromDate and
    J1.RefDate<= @ToDate and
    j1.ProfitCode=@Location and
    A0.GroupMask = 5
    Group By
    J1.Account,j1.ProfitCode

  • I have a form that i need to convert to a pdf with fields

    i am working on a form that will be used for registration. I created it in Publisher then saved it as a jpeg.  In order to be more efficient with collecting information, i need to save this form as a pdf with fields so it can be filled out online and perhaps saved and emailed back to me. Please help!!

    I am not sure Publisher was the best approach as there is no conversion from Publisher directly to the PDF format as there is with Word.
    You will Acrobat Standard or Professional to create PDF forms. There is a 30 day free trial of Acrobat Professional and after that period you need to either buy a copy of Professional or subscribe tot he cloud product. You could also uninstall the Professional version and buy or subscribe to the Standard version.
    Entire books have been written about creating forms with Acrobat.
    Once you acquire Acrobat, I would print the Publisher document to the Adobe PDF printer and then use Acrobat to add the form fields.
    You are also going to need to review how various computer systems work with PDF forms, which browsers work well with PDF forms, how the older versions or Acrobat/Reader work with forms, and email, and if any mobile device will be used how the different apps work or do not work with PDF forms.

  • Need Help ! Content Search Web Part with default callout menu as docoument library

    I want the above functionality with the Content Search Web Part(CSWP).

    Hi,
    Per my understanding, you might want to create something like a
    Content Search Web Part(which is introduced in SharePoint 2013) in your SharePoint 2010 environment with the callout menu functionality.
    As there is no OOTB Content Search Web Part in SharePoint 2010, a suggestion is that you can build a custom web part with the help of
    Search API and create custom callout menu for it.
    Two demos about
    how to work with Search API in SharePoint 2010 for your reference:
    http://nikpatel.net/2013/02/21/step-by-step-building-custom-sharepoint-2010-search-applications-using-keywordquery-api/
    http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2010/08/12/how-to-use-the-sharepoint-2010-enterprise-search-keywordquery-class.aspx
    For about
    how to create a custom callout menu, the JavaScript plugins below would be helpful:
    http://www.jqueryrain.com/demo/jquery-context-menu/
    Thanks 
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to put non-repeating field in a repeating frame?

    I have a formula field that creates the header for a list in a repeating frame. I seem to be in a quandary though-if I include the field inside the repeating frame the header gets repeated. If I put it outside the frame I get an error 'Field references Column at a frequency below its group'. If I move the formula column to the parent query it works except in the case where the child query returns no rows-then I get the header with no data.
    So, I either need a way to display the header inside the repeating frame, but only once, or I need a way to suppress the header when the child query returns no rows.

    So, I either need a way to display the header inside the repeating frame, but only once, or I need a way to suppress the header when the child query returns no rows.You can try one idea. Keep the formula column in detail group and create one more summary column as serial number for the detail records so in repeating frame place that field (formula column) in repeating frame and use the PL/SQL code for that field as below...
    IF :serial_no = 1 THEN
      RETURN TRUE;
    ELSE
      RETURN FALSE;
    END IF;Then it should display for the first record only.
    -Ammad

  • How to overwrite the header part of a wave file?????

    I need to overwirte the header part of a wave file. Any one has ideas or similar experiences?
    basically, I want to continousely save wave data from a sound card. At the end of my program, I need to write the data size of the final wave file to the header part of the wave file.
    Is there a function to replace the content of a file? Thanks

    I assume that what you want to do is add documentation into the header of the wav file such as the media type, location, equipment used .....
    Some one may have written some routines to do this in Labview, unfortunately all the ones I have are written in Visual Basic, quite a long time ago.
    Here are some pointers in the event that no one has any Labview stuff, we could even knock a few togther, if its not been done.
    The WAV file falls into a cateory of Windows files known as RIFF format files, in fact you will see this written into the file header almost at the very front.
    I quote here from the Microsoft Technet Article:-
    See here for a nice picture and here for full details, although for the header structure I prefer here.
    "The basic building block of a RIFF file is a chunk. A chunk is
    a logical unit of multimedia data, such as a single frame in a video
    clip. Each chunk contains the following fields:
    A four-character code specifying the chunk identifier
    A doubleword value specifying the size of the data member in the chunk
    A data field
    Don't be put off by the fact that it often says AVI rather than WAV in the examples, the RIFF format is an extensible file format supporting lots of various media types even custom types. It's just that at the moment people are interested in Video.
    There are standard fourcc codes that exist to hold various specific types of information and if one of these is not suitable you can create your own, there is (well was) even a way to regiser your own special type with Microsoft!!
    There are a couple of ways of doing the job (assuming some kind sole does not donate a VI library).
    1) Handle all the file i/o yourself by reading in the file and then insert the appropriate headers and rewrite the file out again.
        Involved, but cross platform.
    2) Muck about with Windows 'mmio' librarys (mmioCreateChunk).
        Platform specific but possibly more reliable???
    If you select option 1, then what you have to do is read in the appropriate chunk sizes(lengths) contained in the header, insert your appropriate FOURCC code, size(length) and data then adjust the affected 'chunk' size indicators to put all the various size indicators in the correct place, simple ehhh
    If you select option 2, this requires linking to the appropriate DLL, it always my last resort to avoid DLL hell and portability issues.
    As an example I wrote my own Turbo Pascal and later Visual Basic handlers which allowed attachment of lots of information from a form, and then created a special media format for the data to allow storing native measured data. These files are still recognised by WAV file readers today such as Media Player 10. Of course the data format is not understood because the encoding type was special, but that's the point.
    One final point, there was a tool which read in a WAV file displaying all available headers, with C source (Windows 3.X) supplied in the MSDN toolkit. There are probalby other tools available by now, as a last resort If you decide to have a go I can send you my VB alpha version which reads all standard headers, it might write out a few as well (it was a very long time ago).
    Good  luck.
    Message Edité par Conseils le 12-10-2005 04:09 PM

  • How can I add a field to a Repeating Frame in the body of a 9i Report

    How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
    I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
    I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
    Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
    Thanks,

    Hi,
    i also got same query can u pls tell me elaborately, if u can can u pls send some code.
    Thanks & Regards
    Jagadeeshwar.B

  • Need sample code with RV_INVOICE_CREATE used

    Hi everybody!
    I need sample code with RV_INVOICE_CREATE or similar FMs used.
    The thing is that I do not know how to populate parametres of this and other invoicing FMs....
    For example, there are some tables to be passed to RV_INVOICE_CREATE
         TABLES
              XKOMFK     = XKOMFK
              XKOMV       = XKOMV
              XTHEAD      = XTHEAD
              XVBFS        = XVBFS
              XVBPA        = XVBPA
              XVBRK        = XVBRK
              XVBRP        = XVBRP
              XVBSS        = XVBSS
    How to populate them? I mean how to fill them with needed values?
    Useful answers will be awarded.
    Kind regards, M.

    RV_INVOICE_CREATE is the function module to create invoice based on delivery .
    when you pass delivery number ,it will create invoice ,see the invoice number in vf02,vf03 transaction. and also see the data vbrk,vbrp tables
    I have done this development and i have cancelled invoice,reverse goods issue,updated the delivery and again i am createing invoice..see the below progrm to get better understanding.
    REPORT ZWM_OVERWEIGHT_FIX  no standard page heading
                               message-id zwm.
    ======================================================================
    Program Name : ZWM_OVERWEIGHT_FIX                                    *
    Description  : Tool to fix Overweight in delivery line item,         *
                   Used All Function module to cancel invoice ,          *
                   Reverse the goods issue  ,Update Delivery qty,Create  *
                   invoice                                               *
    Author       : Seshu                                                 *
    Date         : 05/08/2007                                            *
    MODIFICATION HISTORY                                                 *
    DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
    --|||--
    05/08/07| Seshu    | DEVK921979 | Initial                            *
    D A T A - D E C L A R A T I O N     *******************
    Tables
    Tables : vbak,
             vbap,
             vbfa,
             likp,
             lips,
             vbrk,
             vbrp.
    Internal Tables
    data : i_lips like lips occurs 0 with header line,
           i_vbap like vbap occurs 0 with header line.
    Variables
    data : v_deliv like vbfa-vbelv,
           v_invoic like vbfa-vbelv.
    Data Declaration Part for Post Goods Issue
    DATA: l_vbeln LIKE likp-vbeln,
          l_vbkok LIKE vbkok,
          i_prot LIKE prott OCCURS 0 WITH HEADER LINE,
          ef_error_any_0 TYPE c,
          ef_error_in_item_deletion_0 TYPE c,
          ef_error_in_pod_update_0 TYPE c,
          ef_error_in_interface_0 TYPE c,
          ef_error_in_goods_issue_0 TYPE c,
          ef_error_in_final_check_0 TYPE c,
          d_return   LIKE bapireturn1.
    Internal tables for BAPI Function Module
    data : i_cret like BAPIRETURN1 occurs 0 with header line,
           i_csucess like BAPIVBRKSUCcESS occurs 0 with header line,
           i_ret2 like bapiret2 ,
           flag type c,
           i_mesg like mesg occurs 0 with header line.
    Data Declaration for Invoice Creation
    DATA: VBSK_I     LIKE  VBSK.
    data: d_success  type  c.
    DATA: XKOMFK LIKE      KOMFK   OCCURS 0 WITH HEADER LINE,
          XKOMV  LIKE      KOMV    OCCURS 0 WITH HEADER LINE,
          XTHEAD LIKE      THEADVB OCCURS 0 WITH HEADER LINE,
          XVBFS  LIKE      VBFS    OCCURS 0 WITH HEADER LINE,
          XVBPA  LIKE      VBPAVB  OCCURS 0 WITH HEADER LINE,
          XVBRK  LIKE      VBRKVB  OCCURS 0 WITH HEADER LINE,
          XVBRP  LIKE      VBRPVB  OCCURS 0 WITH HEADER LINE,
          XVBSS  LIKE      VBSS    OCCURS 0 WITH HEADER LINE,
          XKOMFKGN LIKE    KOMFKGN OCCURS 0 WITH HEADER LINE.
    S E L E C T I O N  -  S C R E E N   ******************
    Selection-screen
    Selection-screen : begin of block blk with frame title text-001.
    parameters : p_vbeln like vbak-vbeln obligatory.
    selection-screen : end of block blk.
    A T -  S E L E C T I O N  - S C R E E N ***************
    Validation on Sales order
    at selection-screen on p_vbeln.
    Check the data on VBAK Table
      select single vbeln from vbak into vbak-vbeln
                                where vbeln = p_vbeln.
      if sy-subrc ne 0.
        message e006 with p_vbeln.
      endif.
    S T A R T  - O F - S E L E C T I O N *******************
    Start-of-selection.
      break sreddy.
    Get the Invoice Number corresponding Sales Order Number
      perform get_invoice.
    Step 1.
    Cancel the Invoice  - Transaction VF11
      perform cancel_invoice.
    Reverse the goods issue
      perform reverse_goodsissue.
    Get the Order and Delivery Items
      perform get_sales_deliv.
    Delivery Change
      perform Delivery_change.
    Create Invoice document
      perform invoice_create.
    E N D  -  O F -  S E L E C T I O N  *******************
    end-of-selection.
    if flag = 'X'.
    message i012 with p_vbeln.
    endif.
    *&      Form  get_invoice
          Get Invoice Number
    FORM get_invoice.
    Clear Variables
      clear : v_deliv,
              v_invoic,
              flag.
    Get the Delivery Number First
      select single vbeln from vbfa into v_deliv
                               where vbelv = p_vbeln
                               and   vbtyp_n = 'J'.
      if sy-subrc ne 0.
        message i004 with p_vbeln.
        stop.
      endif.
    Get the Invoice Number
      select single vbeln from vbfa into v_invoic
                               where vbelv = p_vbeln
                               and   vbtyp_n = 'M'.
      if sy-subrc ne 0.
        message i003 with p_vbeln.
        stop.
      endif.
    ENDFORM.                    " get_invoice
    *&      Form  cancel_invoice
          Cancel the Invoice
    FORM cancel_invoice.
      clear : i_ret2,
              i_cret,
              i_csucess.
      refresh : i_cret,
                i_csucess.
      CALL FUNCTION 'BAPI_BILLINGDOC_CANCEL1'
        EXPORTING
          BILLINGDOCUMENT       = v_invoic
      TESTRUN               =
      NO_COMMIT             =
      BILLINGDATE           =
        TABLES
          RETURN                = i_cret
          SUCCESS               = i_csucess
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
                WAIT   = space
           IMPORTING
                RETURN = i_ret2.
    read table i_cret with key type = 'E'.
      if sy-subrc ne 0.
        message i005 with v_invoic.
        stop.
      endif.
    ENDFORM.                    " cancel_invoice
    *&      Form  reverse_goodsissue
          Reverse the goods Issue
    FORM reverse_goodsissue.
    Local Variable
      data : lv_vbtyp like likp-vbtyp.
      clear : i_mesg,
              lv_vbtyp.
      refresh : i_mesg.
      select single vbtyp from likp into lv_vbtyp
                               where vbeln = v_deliv.
      CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
        EXPORTING
          I_VBELN                         = v_deliv
          I_BUDAT                         = sy-datum
        I_COUNT                         =
        I_MBLNR                         =
        I_TCODE                         =
          I_VBTYP                         = lv_vbtyp
        TABLES
          T_MESG                          = i_mesg
       EXCEPTIONS
         ERROR_REVERSE_GOODS_ISSUE       = 1
         OTHERS                          = 2
      if sy-subrc ne 0.
        message i007 with v_deliv.
      endif.
    ENDFORM.                    " reverse_goodsissue
    *&      Form  get_sales_deliv
          Get the Sales order and Deliv Items
    FORM get_sales_deliv.
    Local Variables
      data : lv_kwmeng like vbap-kwmeng.
      clear : i_lips,
              i_vbap.
      refresh : i_lips,
                i_vbap.
    Select the data from LIPS
      select * from lips into table i_lips
                         where vbeln = v_deliv.
      if sy-subrc ne 0.
        message i008 with v_deliv.
        stop.
      endif.
      sort i_lips by vbeln posnr.
      Get the Sales order Item Data.
      select * from vbap into table i_vbap
                              where vbeln = p_vbeln.
      if sy-subrc ne 0.
        message i006 with p_vbeln.
        stop.
      endif.
      sort i_vbap by vbeln posnr.
    Compare delivery Item and Order Items
      loop at i_lips.
        clear lv_kwmeng.
        read table i_vbap with key posnr = i_lips-posnr.
        if sy-subrc eq 0.
          lv_kwmeng = i_vbap-kwmeng * 2.
          if lv_kwmeng >= i_lips-lfimg.
            i_lips-lfimg = i_vbap-kwmeng.
            modify i_lips.
          endif.
        endif.
      endloop.
    ENDFORM.                    " get_sales_deliv
    *&      Form  Delivery_change
          Delivery Update
    FORM Delivery_change.
      Clear : i_prot.
      refresh : i_prot.
    Delivery Update
      CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
           EXPORTING
                do_commit                = 'X'
           TABLES
                t_delivery_items         = i_lips
                prot                     = i_prot
           EXCEPTIONS
                conversion_overflow      = 1
                essential_data_missing   = 2
                error                    = 3
                nothing_to_update        = 4
                lock_after_update_failed = 5
                error_in_delivery_update = 6
                OTHERS                   = 7.
      COMMIT WORK.
      IF sy-subrc <> 0.
        MESSAGE i009 with v_deliv.
      endif.
    Post Goods Issue
      CLEAR:    d_return,
                i_prot,
                l_vbeln,
                l_vbkok.
      REFRESH i_prot.
      CLEAR:  ef_error_in_item_deletion_0    ,
              ef_error_in_pod_update_0       ,
              ef_error_in_interface_0        ,
              ef_error_in_goods_issue_0      ,
              ef_error_in_final_check_0      .
    carry out goods issue
      l_vbeln          = v_deliv.
      l_vbkok-vbeln_vl = l_vbeln.
      l_vbkok-wabuc    = 'X'.
    carry out goods issue
      l_vbeln          = v_deliv.
      l_vbkok-vbeln_vl = l_vbeln.
      l_vbkok-wabuc    = 'X'.
    SET UPDATE TASK LOCAL.
      CALL FUNCTION 'WS_DELIVERY_UPDATE'
           EXPORTING
                vbkok_wa                    = l_vbkok
                synchron                    = 'X'
                no_messages_update          = ' '
                update_picking              = 'X'
                commit                      = 'X'
                delivery                    = l_vbeln
                nicht_sperren               = 'X'
                if_error_messages_send_0    = space
           IMPORTING
                ef_error_any_0              = ef_error_any_0
                ef_error_in_item_deletion_0 = ef_error_in_item_deletion_0
                ef_error_in_pod_update_0    = ef_error_in_pod_update_0
                ef_error_in_interface_0     = ef_error_in_interface_0
                ef_error_in_goods_issue_0   = ef_error_in_goods_issue_0
                ef_error_in_final_check_0   = ef_error_in_final_check_0
           TABLES
                prot                        = i_prot
           EXCEPTIONS
                error_message               = 1
                OTHERS                      = 2.
      if sy-subrc ne 0.
        message i010 with v_deliv.
      else.
        COMMIT WORK .
      endif.
    ENDFORM.                    " Delivery_change
    *&      Form  invoice_create
          Invoice Creation
    FORM invoice_create.
      refresh: XKOMFK, XKOMV,
               XTHEAD, XVBFS,
               XVBPA,  XVBRK,
               XVBRP,  XVBSS.
      clear  : XKOMFK, XKOMV,
               XTHEAD, XVBFS,
               XVBPA,  XVBRK,
               XVBRP,  XVBSS,
               VBSK_I.
      VBSK_I-SMART = 'F'.
      XKOMFK-VBELN =  v_deliv.
      XKOMFK-VBTYP = 'J'.
      APPEND XKOMFK.
      CALL FUNCTION 'RV_INVOICE_CREATE'
           EXPORTING
                VBSK_I       = VBSK_I
                WITH_POSTING = 'C'
           TABLES
                XKOMFK       = XKOMFK
                XKOMV        = XKOMV
                XTHEAD       = XTHEAD
                XVBFS        = XVBFS
                XVBPA        = XVBPA
                XVBRK        = XVBRK
                XVBRP        = XVBRP
                XVBSS        = XVBSS.
      if sy-subrc eq 0.
        COMMIT WORK.
       flag = 'X'.
      else.
      message i011 with p_vbeln.
      endif.
    ENDFORM.                    " invoice_create
    Reward Points if it is helpful
    Thanks
    Seshu

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Dynamic table with field type table

    Hi,
    I´m using "cl_alv_table_create=>create_dynamic_table" to create a dynamic table for ALV Grid.
    But...I need to use colors in ALV, then I need to declare a field type LVC_S_SCOL in dynamic table from "cl_alv_table_create=>create_dynamic_table".
    How can I declare this in fieldcat?
    The code:
    Creating dynamic table
    DATA: table_agrup TYPE REF TO data,
            line_agrup  TYPE REF TO data.
    CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog           = t_fieldcat
        IMPORTING
          ep_table                  = table_agrup
        EXCEPTIONS
          generate_subpool_dir_full = 1
          OTHERS                    = 2.
        ASSIGN table_agrup->* TO .
    Printing ALV
      CALL METHOD obj_grid->set_table_for_first_display
        EXPORTING
          is_variant                    = w_variant
          i_save                        = 'A'
          is_layout                     = w_layout
        CHANGING
          it_outtab                     =
          it_fieldcatalog               = t_fieldcat
          it_sort                       = t_sort
        EXCEPTIONS
          invalid_parameter_combination = 1
          program_error                 = 2
          too_many_lines                = 3
          OTHERS                        = 4.
    Thanks.

    It is not possible with the  METHOD cl_alv_table_create=>create_dynamic_table to include another table inside that newly generated table.
    I have tried to do it with the code and I got the dynamic table created after at the end of the program.
    In the code,
    <DYN_TABLE> has same effect as your <table> variable
    <DYN_WA> has same effect as your <HEADER>
    REPORT  ZTEST_NP_DYNAMIC.
    DATA: DY_TABLE TYPE REF TO DATA,
          DY_LINE  TYPE REF TO DATA.
    FIELD-SYMBOLS: <DYN_TABLE> TYPE STANDARD TABLE,
                   <DYN_WA>,
                   <DYN_FIELD>.
    FIELD-SYMBOLS: <FS> TYPE ANY.
    * To generate the Dyanmic table with the COLOR
    DATA: LS_SOURCE TYPE STRING.
    DATA: LT_SOURCE LIKE STANDARD TABLE OF LS_SOURCE WITH HEADER LINE.
    DATA: L_NAME LIKE SY-REPID.
    DATA: L_MESSAGE(240) TYPE C,
          L_LINE TYPE I,
          L_WORD(72) TYPE C.
    DATA: L_FORM(30) TYPE C VALUE 'TABLE_CREATE'.
    LT_SOURCE = 'REPORT ZTEST_SUBROUTINE_POOL.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'FORM  TABLE_CREATE USING I_FS TYPE ANY.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'DATA: BEGIN OF LT_GENTAB OCCURS 0.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'DATA: BUKRS TYPE BUKRS. '.
    APPEND LT_SOURCE.
    LT_SOURCE = 'DATA: BKTXT TYPE BKTXT. '.
    APPEND LT_SOURCE.
    * you can add your fields here.....
    LT_SOURCE = 'DATA: COLOR TYPE lvc_t_scol. '.
    APPEND LT_SOURCE.
    LT_SOURCE = 'DATA: END OF LT_GENTAB.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'DATA: POINTER TYPE REF TO DATA.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'CREATE DATA POINTER LIKE STANDARD TABLE OF LT_GENTAB.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'I_FS = POINTER.'.
    APPEND LT_SOURCE.
    LT_SOURCE = 'ENDFORM. '.
    APPEND LT_SOURCE.
    L_NAME = 'ZTEST_SUBROUTINE_POOL'.
    CATCH SYSTEM-EXCEPTIONS GENERATE_SUBPOOL_DIR_FULL = 9.
      GENERATE SUBROUTINE POOL LT_SOURCE NAME L_NAME
               MESSAGE L_MESSAGE LINE L_LINE WORD L_WORD.  "#EC CI_GENERATE
    ENDCATCH.
    IF NOT L_MESSAGE IS INITIAL.
      MESSAGE E000(0K) WITH L_MESSAGE L_LINE L_WORD.
    ENDIF.
    ASSIGN DY_TABLE TO <FS>.
    PERFORM (L_FORM) IN PROGRAM (L_NAME) USING <FS>.
    ASSIGN DY_TABLE->* TO <DYN_TABLE>.
    * Create dynamic work area and assign to FS
    CREATE DATA DY_LINE LIKE LINE OF <DYN_TABLE>.
    ASSIGN DY_LINE->* TO <DYN_WA>.
    Write: 'bye'.
    Regards,
    Naimesh Patel

  • How can I put an image in the page header so that it will be repeated on every page?

    Hi to everyone!
    I want to create a Pages template with the logo of our company in the page header.
    I'd like to put that image (logo) in the page header so that it will be repeated on every page but it will not modify the content of the page.
    Anyone know how to achive this, or something similar without have to copy-paste that image every time we add a page to the document?
    Thanks in advance

    Takashi,
    Turn off the Page Headers (not absolutely necessary, but since you don't need it, why not)
    Put your Graphic on the page and make the following settings:
    Then Insert > Text Box and make the same settings as for the graphic.
    Place your "Header text" in the text box and arrange the box and graphic as you want them. Move both to Section Master using the Arrange menu.
    Jerry

Maybe you are looking for

  • Sending Midi Timecode to ETC Ion Lighting Console

    Hello, I am not very experienced with MIDI at all, but I am helping to explore options for a project I am involved with.   Does anyone know if Audition 3.0 supports MIDI Show Control (MSC) or if there are any 3rd party plugins that add this functiona

  • CFFORM regex Problem

    I'm trying to restrict a form value to something like mm/dd as follows: <cfinput type="text" name="AnStartDate#i#" id="AnStartDate#i#" validate="regular_expression" pattern="^[0-1]?[0-9]/[0-3]?[0-9]*$" size="4" maxlength="5" validateat="onSubmit" mes

  • Quadro 4000 and FCPX

    Hey guys, I'm running a Quadro 4000 on a 2010 Mac Pro with 32 GB Memory. Running FCPX is not nearly as smooth as it is on my 2010 iMac with the ATI 5770M. I understand that's because the NVidia card doesn't do opencl well... BUT, especially now with

  • I get a question mark next to email addresses when I try to send a meeting request and it fails

    Outlook 2010, standard Win 7 setup. I am trying to send a meeting request and when I bring up the address book to insert email addresses it seems to insert the address but it has a gray question mark next to it.  Sending then fails. Even an email add

  • Dock question for MacBook?

    Any hacks on getting this Kensington Notebook Dock to work with my MacBook Pro? It says Windows only, but I'm wondering there is a workaround. http://us.kensington.com/html/10362.html Thanks!