Need help about Post  goods movement with refernece to Inbound delivery

Hi All,
I am using  FMs MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT and commit to create a goods movement. I am successfully creating the MM doc and also posting.But still the Inbound delivery is open for GR.Is there any other function module or BAPI that creates GR with reference to Inbound delivery and update the document flow?Or is there any parameter in the above FM that sets the inbound delivery.Kindly provide your guidance on the same.
Best Regards,
Sailaja.

I used BAPI_GOODSMVT_CREATE and it posted the GR successfully and the document flow was updated also.
You have to use GM_code '01' and give the delivery number / item number w/o PO (if I gave the PO additionally, it also worked).
If still your document flow is not updated then have a look at OSS note 1050944 and check your config.

Similar Messages

  • Find a bapi for Creates a Goods Receipt with correspond to Inbound Delivery

    hi expert!
    exist a bapi for tcode:MIGO_GR ( Goods Receipt with correspond to Inbound Delivery)
    i know one bapI  BAPI_GOODSMVT_CREATE can Creates a Goods Receipt,
      but i can't know to use it to Creates a Goods Receipt with correspond to Inbound Delivery.
    or other bapi exist for MIGO_GR?
    Best Regard!

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Error in posting goods movement with production order

    Hi all,
        I have a custom program that post goods movement using function  'Bapi_Goodsmvt_Create'.
    The material passed into is a FERT material along with movement type 101,  goods-movement code = 02', movement indicator = 'F'.    This function gives an error :
    'E M7 022 Order quantity exceeded by 21.390 cse : item xxxxxx, plant xx prod order xxxxx'.
    The material is a take weight material.   In production order, it came up to 910lb for total weight.
    In goods receiving this material, i have changed the material from 910lb to 1016.950.
    This is where the error came in.  Note: 21.39 cases = 106.95 lb.
    We had such take weight material worked before.
    Can anyone pls suggestion what can be done about this ?
    Thanks
    Joyce

    Hi Dario,
        Because the finised material is a take weight product, it should be ok unless there is a tolerance in the takeweight.   Also the production order is generated from 2 sales orders.
       To migo a production order, would it be A01 Goods Receipt and  R08 for prod order ?
    Thank you.
    Joyce

  • User exit for post good receipt for tcode VL32n(inbound delivery)

    HI,
    I need a user exit which should get triggered when the user hit the button "post good receipt" under tcode VL32N. I appreciate your help.
    Thanks,
    Sanjay

    Hi,
    Here is the list
    Enhancement                                                                               
    VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)       
    VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)       
    VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)      
    VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc           
    V53W0001                                User exits for creating picking waves                       
    V53C0002                                W&S: RWE enhancement - shipping material type/time slot     
    V53C0001                                Rough workload calculation in time per item                 
    V50S0001                                User Exits for Delivery Processing                          
    V50R0004                                Calculation of Stock for POs for Shipping Due Date List     
    V50R0002                                Collective processing for delivery creation                 
    V50R0001                                Collective processing for delivery creation                 
    V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields     
    V50PSTAT                                Delivery: Item Status Calculation                           
    V02V0004                                User Exit for Staging Area Determination (Item)             
    V02V0003                                User exit for gate + matl staging area determination (headr)
    V02V0002                                User exit for storage location determination                
    V02V0001                                Sales area determination for stock transport order                                                                               
    Business Add-in                                                                               
    DELIVERY_ADDR_SAP                       Address Change in Delivery Processing                       
    DELIVERY_PUBLISH                        Announcement of delivery data during database update        
    Shib

  • Issue in Goods Receipt with respect to Inbound Delivery

    Hi Gurus,
    We have a scenario where goods receipt (Migo) is done based on inbound delivery.
    i have created a PO for 10 Qty..
    i have done inbound delivery for 10 qty
    In actual GR (MIGO) only 8 qty is received and i posted it. whether the actual qty received will be updated in inbound delivery.
    please note GR will also be done in EWM.
    Please let me know if any standard config is required.

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Need help about MS SQL Gate with Mess Code Data

    My Database is Oracle9i, and select * from nls_database_parameters with fellow table params
    PARAMETER VALUE
    1 NLS_CSMIG_SCHEMA_VERSION 3
    2 NLS_NCHAR_CHARACTERSET AL16UTF16
    3 NLS_LANGUAGE AMERICAN
    4 NLS_TERRITORY AMERICA
    5 NLS_CURRENCY $
    6 NLS_ISO_CURRENCY AMERICA
    7 NLS_NUMERIC_CHARACTERS .,
    8 NLS_CHARACTERSET UTF8
    9 NLS_CALENDAR GREGORIAN
    10 NLS_DATE_FORMAT DD-MON-RR
    11 NLS_DATE_LANGUAGE AMERICAN
    12 NLS_SORT BINARY
    13 NLS_TIME_FORMAT HH.MI.SSXFF AM
    14 NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    15 NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
    16 NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
    17 NLS_DUAL_CURRENCY $
    18 NLS_COMP BINARY
    19 NLS_LENGTH_SEMANTICS BYTE
    20 NLS_NCHAR_CONV_EXCP FALSE
    21 NLS_RDBMS_VERSION 9.2.0.5.0
    22 NLS_SAVED_NCHAR_CS WE8ISO8859P1
    and confing access ms sql with oracle gate by ODBC, and the ms sql characterset with Chinese_PRC_CS_AI, Chinese_PRC_CS_AS.
    my pc NLS_LANG=AMERICAN_AMERICA.ZHS16GBK.
    when i query oracle database chinese data is ok, but when access the chinese data in ms sql will be ????(mess code data)?
    How can i confing to access mssql chinese data be normal format, pls ?
    Edited by: Rain.zhang on 2008-10-8 下午3:15

    hi llturro,
    Thanks for answering my question. I have tried out what you suggested, but I still can't fix my problem. The following are the messages that display when I try to run my servlet. It seems that the DataSource, Connection and Statement are ok, however when it comes to the ResultSet the error message appear. What's wrong with my ResultSet coding ?
    ResultSet rs = stat.executeQuery("SELECT ISBN FROM BOOKSINFO WHERE ISBN='"+primarykey+"'");
    setEntityContext Method
    Find by primary key
    DataSource OK
    Connection OK
    Primary Key = 013-00-675721-9
    Statement OK
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
    java.rmi.RemoteException: Unknown Exception/Error thrown by EJB method.; nested exception is:
    java.lang.NullPointerException
    java.rmi.RemoteException: Unknown Exception/Error thrown by EJB method.; nested exception is:
    java.lang.NullPointerException
    java.lang.NullPointerException
    <<no stack trace available>>

  • Posting Goods Receipt with ASN number in ECC with Message type: MBGMCR

    We are using Basic Idoc Type :MBGMCR02 to Post Auto Goods Receipt in ECC.
    This happens when external system ( 3rd Party System) sends this message which in turn posts the GR in ECC.
    Thru Goods Movement BAPI
    My Question is CAN WE POST auto goods receipt thru MBGMCR02 with Inbound delivery as reference document - Instead use ASN ( Advanced shipping notification ) which is Reference document in inbound delivery to Post Goods receipt in ECC.
    This is required for our integration peice with 3rd party system.
    And also pl let me if we can use Basic types MBGMCR01 or MBGMCR03 to post auto goods receipt in ECC with reference to PO which has confirmation control key set and instead of passing inbound delivery number can we pass ASN number which is external delivery ( Reference ) number and post goods receipt successfully in ECC.
    Would appreciate your immediate help in this regard.
    Regards,
    Mahesh

    Thank you Vinod.
    We are using MBGMCR02 to post Auto GR by using BAPI - Inbound into ECC.
    We have a 3PL scenario where third Party system will push this message to us ( ECC) which in turn post Auto Goods receipt.
    Here is the process:
    Systems involved : SNC / ECC / 3rd Party
    ASN gets published in SNC  which in turn posts inbound delivery in ECC and a copy of Inbound delivery with SNC ASN number is sent to third party system.
    Third party system is the Carrier ( shipper) they in turn send us the shipment confirmation when they send the goods.
    When they send it to our ECC we have MBGMCR02 to post Auto GR in ECC thru BAPI calling MB_GOODS_MOVEMENT
    This will post the GR with respect to inbound delivery- That works fine..
    Now we are testing an scenario where instead of sendindg ASN to 3rd part system from ECC after Inbound delivery is created.
    We want to send the ASN information ( Which will have PO number as well ) without  ECC 's inbound delivery number directly to 3rd party system  after ASN gets published in SNC thru PI - This is before inbound delivery is created in ECC.
    And the requirement is when 3rd Party system sends the shipment confirmation to ECC  - They will send ASN ( SNC ASN) and ECC  PO number with quantity , vendor , movement type :101 , movement indicator etc -  CAN in ECC when you send these information without inbound delivery posts Auto Goods receipt.
    Based on SNC ASN which is external delivery number in ECC as per PO / Reference number in Inbound delivery document.
    Can MBGMCR01/ 02 / 03  posts GR in ECC with these information ( Mean without the ECC inbound delivery number )
    Which will allow us to avoid the step of sending ASN information along with inbound delivery to 3rd party system after inbound delivery is created - Instead will send directly from SNC / PI / 3rd party
    Point to be noted is - These are SNC PO's which will always have confirmation control key.
    When 3rd part send the shipemnt confirmation with SNC ASN number and PO number while posting Idoc in ECC any of MBGMCR idoc types should check / search for inbound delivery associated and post the GR in ECC
    Can you pl let me know your thoughts pl
    Thanks,
    Mahesh

  • BAPI for posting GR with reference to inbound delivery

    Hi Gurus,
    Please suggest me a BAPI to post the GR with respect to inbound delivery. Also, it would be better , if the partial GR can be done using this BAPI. We need to use a BAPI, so that the material document flow is updated as well after the processing of BAPI.
    I can not use the BAPI: BAPI_GOODSMVT_CREATE, as this does not update the material document flow. Also, the BAPI BAPI_INB_DELIVERY_CONFIRM_DEC can not be used, as this BAPI does not let me do a partial GR.
    Regards,
    Neha Gupta

    Hi ,
    thank you for quick response.
    FM L_TO_CREATE_DN.. use to create wrt to Delivery number(all line items together), but in current scenario want to create TO
    for single line item and also with partial quantity .
    Regards,
    Madhavi

  • Batch needs to be created 1st then post goods receipt with inbound delivery

    Hi,
    We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
    When we create inbound delivery with PO batch is blank which is correct.
    Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
    In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
    If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
    Can you please let me know this behaviour, is there any SAP note available about this behaviour.
    Thanks
    Sudhir

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

    Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
    I think my wireless rooter's setting has some problem but cannot found anything to solve,
    I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
    Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
    need help
    thanks

    Thanks
    I will and share the result.

  • Need help about career life

    Hi All,
    Em..i just need some advice about choosing correct career path.I graduated with a first class in IT with business information science in 2009. In 2009 after looking for jobs for few months i took a manager post in a petrol station which i never wanted.(Due to the credit crunch & the Family financial reasons) .Then unfortunately i had to stay out of work for 18months due to a serious spinal code operation i had to face.now in 2011 July im fit & ready to start my life again. but im lost where to start/ which career path to choose. (i've still got the job at the petrol station as the manager)
    ive liked data base management subject when i was in the University so, Ive been reading OCA-051 & interested on OCA qualification I just want to know what are the possible jobs i can apply if i get the certification? Basically what should i do to get any IT related job? :( ( i dont like programming)..
    Please be kind to reply.
    ps:i live in the Uk.
    Thanks.

    872882 wrote:
    Hi All,
    Em..i just need some advice about choosing correct career path.I graduated with a first class in IT with business information science in 2009. In 2009 after looking for jobs for few months i took a manager post in a petrol station which i never wanted.(Due to the credit crunch & the Family financial reasons) .Then unfortunately i had to stay out of work for 18months due to a serious spinal code operation i had to face.now in 2011 July im fit & ready to start my life again. but im lost where to start/ which career path to choose. (i've still got the job at the petrol station as the manager)
    ive liked data base management subject when i was in the University so, Ive been reading OCA-051 & interested on OCA qualification I just want to know what are the possible jobs i can apply if i get the certification? Basically what should i do to get any IT related job? :( ( i dont like programming)..
    Please be kind to reply.
    ps:i live in the Uk.
    Thanks.You'll sit on your bum and ruin your back again with most IT jobs. With your government shrinking, OCA qualification won't have much worth unless you personally know someone in the private sector that needs help. An operator job with your petrol company (assuming it's not just a mom 'n pop station) would probably require heavy lifting.
    IT is a good, solid, growing career path, but most of the work is still programming, and most ways up to better jobs go through that experience. You might be an exception if you have a way to join other skills with your IT education, such as business analysis or sales or web prettyfying. Perhaps the determinants are your personality and goals.
    I know, it's tough, but if you are honest with yourself and check out some of the "what color is my parachute" kinds of career advice books, you can find a happy medium. There actually are some benefits in starting a career during economically troubled times, but you only see that in retrospect. You have to decide on goals, pursue them vigorously, and reevaluate when it doesn't work for you.

  • Inbound idoc for posting Goods movements

    hi,
      iam using Transaction WE19 and posting some test data to post goods movement into same system for testing . i have used the message type MBGMCR and process code BAPI for the inbound processing.
    Iam posting test data for movement types 101,102,641 and 642 .and iam processing with the unbound FM BAPI_IDOC_INPUT1,  but iam getting a status 51 (application dod not posted ) with error as ' Update control of movement type is incorrect (entry 101 X X )'.
    what does this mean? please suggest why this error could come?
    if i get a status of 54 - EDI: Partner profile inbound not available .what may be the error? my partner profile setting were correct.
    thanks,
    soha

    Hi !
    The error means that there is an inconsistency between the "given" data and the date that BWA 101 is needing.
    The Table that is beeing checked is the T156.
    Check the data you are giving to the idoc. You may check it with the IDOC-docu or with the Docu of the FM BAPI_GOODSMVT_CREATE to see what fields
    have to be filled in what way to create an 101 .
    Regards
    Rainer
    Some points would be nice if that helped...

  • Goods Movements with Handling Units

    Hi:
    Any one knows how can I get make Goods Movement with Handling Units  inter plants?
    I am trying by VLMOVE but this Tcode just has process for into a Plant not for Transfer posting plant to plant., so, I need give out for materials in Handling Units and Receive the sames in the Receptor Plant
    Is there a special configuration for get this?
    Thanks in advance.
    Omar Perea

    Hi Vishal:
    You're right... I was missing the 301, 303 y 305, but with this operations I can try to resolve my Isuue.
    Thanks
    OP

  • BAPI for Goods Movement with Movement Type 701

    Hi,
    I want to post a goods movement with movement type 701.
    Is there any BAPI I can take?
    I already tried the movement with 'BAPI_GOODSMVT_CREATE' but i got an error message that the movement ist not possible.
    Can anyone help me?
    Regards, Alex

    why dont you tell what message was issued?

  • Inbound IDOC to post goods receipt with inbound delivery as reference

    Kindly let me know the message and IDOC type for
    Inbound IDOC to POST GOODS RECEIPT  with inbound delivery as reference
    I tried using WMMBXY but it didn;t work.
    Pls let me know asap.Your help is appreciated.
    Thanks and Regards
    Priti
    Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

    Hi Nicole,
    What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
    INBOUND - Parter LI with
                            Message DESADV
                            Operation code DELS
    OUTBOUND - Partner KU
                            Message DESADV
                            Operation code ???
    Please advise
    Suchart

Maybe you are looking for

  • Display text file in servlet with preserved formatting(newlines, etc)

    how do i display a text file in servlet, but all the blanks and newlines are preserved. this is what i did: RandomAccessFile text = new RandomAccessFile("D:/FYP/tempMessage.txt","r"); long length = text.length(); byte[] bytes = new byte[(int)length];

  • J2EE or Oracle Portal

    hi folk, I'm gonna work on an J2EE application that deployed on Oracle Application server , It is a PORTAL APPLICATION , the problem is that i don't have experience with PORTAL applications , my question is should i begin with studying J2EE PORTAL OR

  • Slow moving iphone

    i've had my iphone for a month only and it's been running slow when i go to apps store or itunes. when i go to apps store sometimes it would take up to 20 seconds and then the "cannot connect to itunes store" comes up, so i have to click ok and try a

  • How to get the Business One UDF description from the UDF name

    Hi I have a matrix that gets populated by a datatable, which has a query set dependent on a folder that is selected and therefore it is possible to populate the matrix with different data. The problem I am having is that currently the column headings

  • Nokia 5130 7.97 OTA update

    My nokia 5130 current version is 6.93. Nokia suite shows that 7.97 is available, but I cant install it because usb port of mobile does not works. OTA update of mobile says no update available. Please make it available. Solved! Go to Solution.