Need help AT LINE SELECTION

Hi Guys,
I need ur help regarding my coding: AT LINE SELECTION.
Here is my codes, but it is not working.
AT LINE-SELECTION.
IF ( wa_list-auart = 'ZCS' AND wa_list-auart = 'ZSA' ).
    IF NOT wa_list-sonum IS INITIAL.
      SET PARAMETER ID 'AUN' FIELD wa_list-sonum.
      CALL TRANSACTION 'VF01' AND SKIP FIRST SCREEN.
      CLEAR wa_list-sonum.
    ENDIF.
ELSE.
    IF NOT wa_list-drnum IS INITIAL.
      SET PARAMETER ID 'AUN' FIELD wa_list-drnum.
      CALL TRANSACTION 'VF01' AND SKIP FIRST SCREEN.
      CLEAR wa_list-drnum.
    ENDIF.
ENDIF.
The requirements are:
1. Data selection on column Item + Magnifying Glass Icon click will direct user to transaction code VF01 ====>><b>its working, but the problem is when i click the line item no 1, it wasnt work. Line item no 1 only but the rest items its workin.</b>
2. Sales Order No (VBAK-VBELN) will be the default value on document column of VF01 if Sales Order Type (VBAK-AUART) = ZCS or ZSA else Delivery No (LIKP-VBELN) will be the default value on document column of VF01. ===><b>the problem is when i click the line item, there is no default Sales Order No or Delivery NO on parameter 'AUN' <Document column> based on if statement.</b>
3. Warning Message Select a line item to proceed. will be displayed if no line item selected on magnifying glass icon click. ===> <b>help me on how to codes this one if i click to a non line item, there should be a Warning Message Select a line item to proceed.</b>
Thanks in advance.
zhien.

hi joycee
i think one of the command written by u
:-"IF NOT wa_list-sonum IS INITIAL."
shoud be written like
:- IF wa_list-sonum IS NOT INITIAL.

Similar Messages

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

Need help with db select

As usual I have been stuck for a while on what is probably a very simple solution so perhaps someone can help me, thanks.
I have a portfolio page to which I post a url to filter the portfolio type (0, 1 or 2) and display the results.
It works ok except that I can't get the url right to show all records. I have tried things like
/portfolio.php?websitetype=1&2
and
/portfolio.php?websitetype=*
/portfolio.php?websitetype>0
Perhaps I need to change my select?
$query_portfolio = "SELECT * FROM portfoliodb WHERE portfoliodb.websitetype='". $_GET['websitetype'] ."' AND portfoliodb.visible = 1 ORDER BY portfoliodb.portfolio_id DESC";

bikeman01 wrote:
Ok I've now got it working as suggested so that's a big improvement, thanks but it's not quite what I was after. What I want is for all records to be retrieved by default when there is no url suffix and not require ?websitetype=ALL
That is not what your OP asked for!
It works ok except that I can't get the url right to show all records. I have tried things like
/portfolio.php?websitetype=1&2
and
/portfolio.php?websitetype=*
/portfolio.php?websitetype>0
// determine if the URL parameter for websitetype is set.
if (isset($_GET['websitetype'])) {
               // run a query to filter only selected types
               // based off value of URL parameter
                    $query_portfolio = "SELECT *
                    FROM portfoliodb
                    WHERE portfoliodb.websitetype='". $_GET['websitetype'] ."'
                    AND portfoliodb.visible = 1
                    ORDER BY portfoliodb.portfolio_id DESC";
// else if the URL parameter for websitetype is not set.
} else {
                    // run query to display ALL types
                    $query_portfolio = "SELECT *
                    FROM portfoliodb
                    ORDER BY portfoliodb.portfolio_id DESC";
// end condition if the URL parameter for websitetype is set.

Need help in writing SELECT   (strange, to many data in output?)

Hi,
I have:drop table jk_t1;
drop table jk_t2;
create table jk_t1 (
c1 number,
c2 varchar2(3),
c3 number
create table jk_t2 (
d1 number primary key,
d2 varchar2(4)
alter table jk_t1 add constraint t1_t2_fk foreign key (c3) references jk_t2(d1);
insert into jk_t2 values (1,'T2_1');
insert into jk_t1 values (1,'A11',1);
insert into jk_t1 values (2,'A21',1);
commit;I need to write a SELECT to get an output as:<ALL>
<D1>1</D1>
<D2>T2_1</D2>
<INN>
    <T1>
      <ROW><C1>1</C1><C2>A11</C2><C3>1</C3></ROW>
      <ROW><C1>2</C1><C2>A21</C2><C3>1</C3></ROW>
    </T1>
</INN>
</ALL>I'm trying:SELECT XMLElement("ALL",
extract(XMLType(CURSOR(SELECT t2.*, XMLElement("T1",extract(XMLType(CURSOR(
                            SELECT t1.*
                              FROM jk_t1 t1
                             WHERE t1.c3=t2.d1
                          )), '//ROW')) as inn
            FROM jk_t2 t2
           ORDER BY d2)
),'//ROW/*')
) AS output
FROM dual;but the output is<ALL>
<D1>1</D1>
<D2>T2_1</D2>
<INN>
    <T1>
      <ROW><C1>1</C1><C2>A11</C2><C3>1</C3></ROW>
      <ROW><C1>2</C1><C2>A21</C2><C3>1</C3></ROW>
    </T1>
</INN>
<C1>1</C1>
<C2>A11</C2>
<C3>1</C3>
<C1>2</C1>
<C2>A21</C2>
<C3>1</C3>
</ALL>What SELECT should it be to give me the correct output?
Thanks in advance,
JackK

Hi,
Drop the CURSOR thing, and use only SQL/XML functions :
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE     10.2.0.5.0     Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
SQL>
SQL> set long 5000
SQL>
SQL> select xmlelement("ALL",
2           xmlelement("D1", d1)
3         , xmlelement("D2", d2)
4         , xmlelement("INN",
5             xmlelement("T1",
6               xmlagg(
7                 xmlelement("ROW",
8                   xmlforest(c1, c2, c3)
9                 )
10               )
11             )
12           )
13         ).extract('/*') -- for display purpose only
14 from jk_t2 t2
15       join jk_t1 t1 on t1.c3 = t2.d1
16 group by t2.d1, t2.d2 ;
XMLELEMENT("ALL",XMLELEMENT("D
<ALL>
<D1>1</D1>
<D2>T2_1</D2>
<INN>
    <T1>
      <ROW>
        <C1>1</C1>
        <C2>A11</C2>
        <C3>1</C3>
      </ROW>
      <ROW>
        <C1>2</C1>
        <C2>A21</C2>
        <C3>1</C3>
      </ROW>
    </T1>
</INN>
</ALL>
{code}

Need help using the selection tool

Hi all,
I have some strange (to me) occurrences while using the 'quick selection tool'...
Explanation
I'm using PS Elements 11 on a Win 7 (64) PC.
What I want to do is to create a new pic from an existing pic. The existing pic's background is unsuitable for what I want. But the FG is what I need. I thought that selecting the FG object and placing into a new pic would be what I needed using the <quick selection tool>.
To do this, I am trying to use the <quick selection tool>. I've had varying degrees of success using it. One main thing I don't understand & pretty much renders my project useless & undoable, is the fact that whenever I use <refine edge> so that I can refine my edge selection, my pic is immediately lost or taken away. Since I have no idea as to what's happening, I am forced to close the pic (W/O saving changes, of course) & then re-opening the pic. All's well until I click the <refine edge> button again, then, my pic disappears AGAIN!
My guess is that maybe the pic is somehow transformed to a layer or something. But, how can I turn this behavior off and not make my pic disappear??
There are a few more details about this <selection tool> that I'm muddy on. Is there something where I can read more about its use? I would love to know more, but how? Where?
I've now read the online manual part about selection tools. Although it shed some light, I'm still needing more.
I am not a constant user of PSE, rather, I only use it on occasions. Normally, I use its scanning features. I may play around with a few other features, but I also know that PSE offers many other powerful features, I rarely, if ever, use.

This is the Photoshop forum. You want the Photoshop Elements forum:
Photoshop Elements

Need Help With A Select Staement

This is my data set.
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08
I'm need totals for those that are opened and closed per day. Here is what I'm trying to achieve...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
Open 0 03-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
Open 0 05-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
Close 0 09-JAN-08
This select statement gets me close but the problem is how to get the ones that should have a Value of 0
select 'Open' "Status", count(*) "Value", to_char(open_date, 'DD-MON-YY') "DATE"
from usar_log2
where open_date IS NOT NULL and
to_char(open_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
group by to_char(open_date, 'DD-MON-YY')
UNION
select 'Closed' "status", count(*) "Close", to_char(close_date, 'DD-MON-YY')
from usar_log2
where close_date is not null and
to_char(close_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
group by to_char(close_date, 'DD-MON-YY')
order by 3, 1 desc;
The above select statement's results...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
But I need this instead...
Status Value DATE
Open 6 02-JAN-08
Closed 3 02-JAN-08
<----- Open 0 03-JAN-08
Closed 1 03-JAN-08
Open 1 04-JAN-08
Closed 1 04-JAN-08
<----- Open 0 05-JAN-08
Closed 1 05-JAN-08
Open 3 07-JAN-08
Closed 2 07-JAN-08
Open 3 08-JAN-08
Closed 1 08-JAN-08
Open 1 09-JAN-08
<----- Close 0 09-JAN-08
Any help would be more appreciative.

Thank you...You all are great. While I'm still
looking at the various ways you all provided, from
what I have looked at so far, they don't address
05-JAN-08 which has a null open date. There are
three possiblities, maybe four. Does 05-JAN-08 have a null open date in the data you supplied?
You showed us:
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08
which looks like they all have open dates.
Perhaps, if there was null open dates you should have used [code][/code] or [pre][/pre] tags around your data so it looked something like
OPEN_DATE CLOSE_DATE
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 02-JAN-08
02-JAN-08 03-JAN-08
04-JAN-08 04-JAN-08
          05-JAN-08
07-JAN-08
07-JAN-08 07-JAN-08
07-JAN-08 07-JAN-08
08-JAN-08 08-JAN-08
08-JAN-08
02-JAN-08
02-JAN-08
08-JAN-08
09-JAN-08And then it would have required the ANSI outer join in my query to allow for outer joining on more than one column...
SQL> ed
Wrote file afiedt.buf
1 WITH t as (SELECT to_date('02-JAN-2008','DD-MON-YYYY') as open_date, to_date('02-JAN-2008','DD-MON-YYYY') as closed_date from dual union all
2             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
3             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
4             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('03-JAN-2008','DD-MON-YYYY') from dual union all
5             SELECT to_date('04-JAN-2008','DD-MON-YYYY'), to_date('04-JAN-2008','DD-MON-YYYY') from dual union all
6             SELECT NULL, to_date('05-JAN-2008','DD-MON-YYYY') from dual union all
7             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), NULL from dual union all
8             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
9             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
10             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), to_date('08-JAN-2008','DD-MON-YYYY') from dual union all
11             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
12             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
13             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
14             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
15             SELECT to_date('09-JAN-2008','DD-MON-YYYY'), NULL from dual)
16      ,all_dates as (select minod+rownum-1 as dt
17                     from   dual, (select min(open_date) minod, max(open_date) maxod from t)
18                     connect by rownum <= maxod-minod+1)
19      ,stat as (select 'open' as status from dual union all select 'closed' from dual)
20 -- END OF DATA
21 select all_dates.dt, stat.status, sum(decode(decode(stat.status, 'open', t.open_date, t.closed_date), all_dates.dt, 1, 0)) as cnt
22 from   stat JOIN all_dates ON (1=1)
23         LEFT OUTER JOIN t ON (NVL(t.open_date, NVL(t.closed_date, all_dates.dt)) = all_dates.dt)
24 group by all_dates.dt, stat.status
25* order by 1,2 desc
SQL> /
DT        STATUS        CNT
02-JAN-08 open            6
02-JAN-08 closed          3
03-JAN-08 open            0
03-JAN-08 closed          0
04-JAN-08 open            1
04-JAN-08 closed          1
05-JAN-08 open            0
05-JAN-08 closed          1
06-JAN-08 open            0
06-JAN-08 closed          0
07-JAN-08 open            3
07-JAN-08 closed          2
08-JAN-08 open            3
08-JAN-08 closed          1
09-JAN-08 open            1
09-JAN-08 closed          0
16 rows selected.
SQL>Make your requirements clear in the future.

Need help for SQL SELECT query to fetch XML records from Oracle tables having CLOB field

Hello,
I have a scenario wherein i need to fetch records from several oracle tables having CLOB fields(which is holding XML) and then merge them logically to form a hierarchy XML. All these tables are related with PK-FK relationship. This XML hierarchy is having 'OP' as top-most root node and ‘DE’ as it’s bottom-most node with One-To-Many relationship. Hence, Each OP can have multiple GM, Each GM can have multiple DM and so on.
Table structures are mentioned below:
OP:
Name                             Null                    Type
OP_NBR                    NOT NULL      NUMBER(4)    (Primary Key)
OP_DESC                                        VARCHAR2(50)
OP_PAYLOD_XML                           CLOB
GM:
Name                          Null                   Type
GM_NBR                  NOT NULL       NUMBER(4)    (Primary Key)
GM_DESC                                       VARCHAR2(40)
OP_NBR               NOT NULL          NUMBER(4)    (Foreign Key)
GM_PAYLOD_XML                          CLOB
DM:
Name                          Null                    Type
DM_NBR                  NOT NULL         NUMBER(4)    (Primary Key)
DM_DESC                                         VARCHAR2(40)
GM_NBR                  NOT NULL         NUMBER(4)    (Foreign Key)
DM_PAYLOD_XML                            CLOB
DE:
Name                          Null                    Type
DE_NBR                     NOT NULL           NUMBER(4)    (Primary Key)
DE_DESC                   NOT NULL           VARCHAR2(40)
DM_NBR                    NOT NULL           NUMBER(4)    (Foreign Key)
DE_PAYLOD_XML                                CLOB
+++++++++++++++++++++++++++++++++++++++++++++++++++++
SELECT
j.op_nbr||'||'||j.op_desc||'||'||j.op_paylod_xml AS op_paylod_xml,
i.gm_nbr||'||'||i.gm_desc||'||'||i.gm_paylod_xml AS gm_paylod_xml,
h.dm_nbr||'||'||h.dm_desc||'||'||h.dm_paylod_xml AS dm_paylod_xml,
g.de_nbr||'||'||g.de_desc||'||'||g.de_paylod_xml AS de_paylod_xml,
FROM
DE g, DM h, GM i, OP j
WHERE
h.dm_nbr = g.dm_nbr(+) and
i.gm_nbr = h.gm_nbr(+) and
j.op_nbr = i.op_nbr(+)
+++++++++++++++++++++++++++++++++++++++++++++++++++++
I am using above SQL select statement for fetching the XML records and this gives me all related xmls for each entity in a single record(OP, GM, DM. DE). Output of this SQL query is as below:
Current O/P:
<resultSet>
     <Record1>
          <OP_PAYLOD_XML1>
          <GM_PAYLOD_XML1>
          <DM_PAYLOD_XML1>
          <DE_PAYLOD_XML1>
     </Record1>
     <Record2>
          <OP_PAYLOD_XML2>
          <GM_PAYLOD_XML2>
          <DM_PAYLOD_XML2>
          <DE_PAYLOD_XML2>
     </Record2>
     <RecordN>
          <OP_PAYLOD_XMLN>
          <GM_PAYLOD_XMLN>
          <DM_PAYLOD_XMLN>
          <DE_PAYLOD_XMLN>
     </RecordN>
</resultSet>
Now i want to change my SQL query so that i get following output structure:
<resultSet>
     <Record>
          <OP_PAYLOD_XML1>
          <GM_PAYLOD_XML1>
          <GM_PAYLOD_XML2> .......
          <GM_PAYLOD_XMLN>
          <DM_PAYLOD_XML1>
          <DM_PAYLOD_XML2> .......
          <DM_PAYLOD_XMLN>
          <DE_PAYLOD_XML1>
          <DE_PAYLOD_XML2> .......
          <DE_PAYLOD_XMLN>
     </Record>
     <Record>
          <OP_PAYLOD_XML2>
          <GM_PAYLOD_XML1'>
          <GM_PAYLOD_XML2'> .......
          <GM_PAYLOD_XMLN'>
          <DM_PAYLOD_XML1'>
          <DM_PAYLOD_XML2'> .......
          <DM_PAYLOD_XMLN'>
          <DE_PAYLOD_XML1'>
          <DE_PAYLOD_XML2'> .......
          <DE_PAYLOD_XMLN'>
     </Record>
<resultSet>
Appreciate your help in this regard!

Hi,
A few questions :
How's your first query supposed to give you an XML output like you show ?
Is there something you're not telling us?
What's the content of, for example, <OP_PAYLOD_XML1> ?
I don't think it's a good idea to embed the node level in the tag name, it would make much sense to expose that as an attribute.
What's the db version BTW?

Need help in Data selection in Smartforms

Hi All,
this data selection is for displaying data in smartforms.
I have a internal table passed on to the Smartforms where i have the Main item and its batches.
posnr text
10 line text1
90004
90005
20 line text2
90006
90007
And in the coding i have made the posnr for batches as 00000 for someother purpose.
now i need to display a text after an item and its batches.
like :
Item Prodcode description Qty uom Picked Factor
batchNo batch qty reel size to ship qty
10 19501 material description 200 M 0 3
Batch1 200 482448
Batch2 200 482448
Special instructions :
i used the following code in the Smartforms to display the Text.
                                                                                V_SPL = 'Special Line Instructions:'.
V_INDEX1 = V_INDEX + 1.
CLEAR IT_FINAL.
READ TABLE IT_FINAL INDEX V_INDEX1.
CLEAR V_INDEX1.
IF IT_FINAL-POSNR > 0.
   CLEAR IT_FINAL.
   READ TABLE IT_FINAL INDEX V_INDEX.
   V_INDEX1 = '9999'.
                                                                                V_ITEMTEXT = IT_FINAL-ITEMTEXT.
V_PACKTEXT = IT_FINAL-PACKTEXT.
ENDIF.
V_INDEX = V_INDEX + 1.
DESCRIBE TABLE IT_FINAL LINES V_LINE.
IF V_INDEX > V_LINE.
   V_INDEX1 = '9999'.
its ok now if the data in the internal table is like this without any batches.
10
20
30
if the data in the internal table is like :
posnr text
10 line text1
0000
0000
0000
20 line text2
0000
0000
30 line text3
0000
it is not getting the data for the text.
Actually in the code i have written to read the next record in the internal table and if it is greater than 0, i will write the TEXT before writing the next item.
But if the next record is 0000, how to code it.
and the main this is , the text has to be written only after writing the item and its batches.
please tell me how to do this.
Waiting for your replies.
Vikki.

Hi,
Just use the internal table to print the data in main window.
for first line which has not batchspitted(main line item) put condition as POSNR NE INITIAL.
and for batch split items, you already made posnr as '0000',
so put condition as POSNR eq INITIAL.
I think this will solve your problem.
Regards,
S Raju.

Need help in data selection

Hi All,
this data selection is for displaying data in smartforms.
I have a internal table passed on to the Smartforms where i have the Main item and its batches.
posnr        text
10            line text1
90004
90005
20           line text2
90006
90007
And in the coding i have made the posnr for batches as 00000 for someother purpose.
now i need to display a text after an item and its batches.
like :
Item    Prodcode           description                   Qty uom     Picked   Factor
            batchNo           batch qty   reel size        to ship              qty
10         19501            material description            200       M         0          3
            Batch1     200               482448
            Batch2     200               482448
Special instructions :
i used the following code in the Smartforms to display the Text.
V_SPL = 'Special Line Instructions:'.
V_INDEX1 = V_INDEX + 1.
CLEAR IT_FINAL.
READ TABLE IT_FINAL INDEX V_INDEX1.
CLEAR V_INDEX1.
IF IT_FINAL-POSNR > 0.
   CLEAR IT_FINAL.
   READ TABLE IT_FINAL INDEX V_INDEX.
   V_INDEX1 = '9999'.
                                                                                V_ITEMTEXT = IT_FINAL-ITEMTEXT.
V_PACKTEXT = IT_FINAL-PACKTEXT.
ENDIF.
V_INDEX = V_INDEX + 1.
DESCRIBE TABLE IT_FINAL LINES V_LINE.
IF V_INDEX > V_LINE.
   V_INDEX1 = '9999'.
its ok now if the data in the internal table is like this without any batches.
10
20
30
if the data in the internal table is like :
posnr         text
10            line text1
0000
0000
0000
20            line text2
0000
0000
30            line text3
0000
it is not getting the data for the text.
Actually in the code i have written to read the next record in the internal table and if it is greater than 0, i will write the TEXT before writing the next item.
But if the next record is 0000, how to code it.
and the main this is , the text has to be written only after writing the item and its batches.
please tell me how to do this.
Waiting for your replies.
Vikki.

Hi,
Just use the internal table to print the data in main window.
for first line which has not batchspitted(main line item) put condition as POSNR NE INITIAL.
and for batch split items, you already made posnr as '0000',
so put condition as POSNR eq INITIAL.
I think this will solve your problem.
Regards,
S Raju.

CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. The Problem: CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors. Are there some Hot Fixes that I need to apply to my copy of CR?
Thanks

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

Need help animating line art/paths

Help please...
I am trying to animate a line, to have it tween/morph between a line and a question mark and then back to a line. I've drawn my two shapes in Illustrator as line art (as paths, not as closed shapes), but I'm not seeing the paths as a mask when I paste them into my Solid Layer. The parts of my drawing that have closed shapes come in and form a mask, but not the individual lines/paths, not matter how thick I make them. I can see there is a path in AE if I click on the shape, but it does not come up as a masked area.
Is there a better way to do this, than to animate a mask? Animating masks seems to be the consensus how to do a lot of animation, but I'm stuck trying to get my line appear as part of my mask.
Happy to try another way; I have yet to see a tutorial that does what I'm trying to do, can't be a reveal, since the final shape needs to morph a few times. I am sure this is do-able (and probably not that hard!), but I can't figure it out; in Flash I would just tween between the two shapes, but not seeing how to do that effect in AE.
Thank you!

hi, i took some screengrabs also, so that you can perhaps see what i might be doing wrong...i inlcuded the original shape, from Illustrator, as well as what happens when I paste in AE. for my shape, blends won't work from Illustrator, I need the line to move in a certain way that Illustrator won't do using that feature. thanks very much .

Need help - payment type selection

I need some help with this.
I have 4 different payment types on my registration buy online form. I want to be able to display relevant information depending on which type is selected;
if cc is selected then display cc input fields then process through payment gateway on submit
if phone for payment is selected then display phone number and times to call
if bank transfer is selected then display bank detail
if paypal is selected then process on paypal on submit.
Has anyone done this before?
Any help will be appreciated.

Hey there, how is your Javascript/jQuery and CSS skills?
These will need to be implemented so it shows hide content depending on what is chosen.

Need help in this select drop down box

Hi i had a drop down box written with select and i had many options , when user selects the option it will insert this to database and when user goes to the edit form the preselected value has to be populate automatically in dropdown , but the last option is populating everytime when uses edit form.
below is the code:
insert page:
            <select name="council" id="council" name="Please select Council from dropdown box">
                <option value="Division">Division</option>
                <option value="Facility">Facility</option>
                <option value="District D">District D </option>
                <option value="District E">District E </option>
                <option value="District J">District J </option>
                <option value="District K">District K </option>
                <option value="District L">District L </option>
                <option value="District M">District M </option>
                <option value="District N">District N </option>
                <option value="District O">District O </option>
                <option value="District Q">District Q </option>
                <option value="District S">District S </option>
                <option value="District T">District T </option>
                
                <option value="D 506">D 506</option>
                <option value="D 524">D 524</option>
                <option value="D 525">D 525</option>
                <option value="D 530">D 530</option>
                <option value="D 531">D 531</option>
                <option value="D 536">D 536</option>
                <option value="D 549">D 549</option>
                <option value="D 558">D 558</option>
                <option value="D 562">D 562</option>
                <option value="D 581">D 581</option>
                <option value="D 583">D 583</option>
                <option value="D 597">D 597</option>
                <option value="D 598">D 598</option>
                <option value="D 599">D 599</option>
                <option value="D 628">D 628</option>
                <option value="D 686">D 686</option>
                <option value="D 698">D 698</option>
                <option value="D 848">D 848</option>
                <option value="D 862">D 862</option>
                <option value="D 870">D 870</option></select>
this is edit page code:
                   <select name="council" id="council">
               <cfoutput query="getdata">
                <option value="Division" <cfif council IS "#getdata.council#"> selected</cfif>>Division</option>
                <option value="Facility" <cfif council IS "#getdata.council#"> selected</cfif>>Facility</option>
                <option value="District D" <cfif council IS "#getdata.council#"> selected</cfif>>District D </option>
                <option value="District E" <cfif council IS "#getdata.council#"> selected</cfif>>District E </option>
                <option value="District J" <cfif council IS "#getdata.council#"> selected</cfif>>District J </option>
                <option value="District K" <cfif council IS "#getdata.council#"> selected</cfif>>District K </option>
                <option value="District L" <cfif council IS "#getdata.council#"> selected</cfif>>District L </option>
                <option value="District M" <cfif council IS "#getdata.council#"> selected</cfif>>District M </option>
                <option value="District N" <cfif council IS "#getdata.council#"> selected</cfif>>District N </option>
                <option value="District O" <cfif council IS "#getdata.council#"> selected</cfif>>District O </option>
                <option value="District Q" <cfif council IS "#getdata.council#"> selected</cfif>>District Q </option>
                <option value="District S" <cfif council IS "#getdata.council#"> selected</cfif>>District S </option>
                <option value="District T" <cfif council IS "#getdata.council#"> selected</cfif>>District T </option>
                <option value="D 506" <cfif council IS "#getdata.council#"> selected</cfif>>D 506</option>
                <option value="D 524" <cfif council IS "#getdata.council#"> selected</cfif>>D 524</option>
                <option value="D 525" <cfif council IS "#getdata.council#"> selected</cfif>>D 525</option>
                <option value="D 530" <cfif council IS "#getdata.council#"> selected</cfif>>D 530</option>
                <option value="D 531" <cfif council IS "#getdata.council#"> selected</cfif>>D 531</option>
                <option value="D 536" <cfif council IS "#getdata.council#"> selected</cfif>>D 536</option>
                <option value="D 549" <cfif council IS "#getdata.council#"> selected</cfif>>D 549</option>
                <option value="D 558" <cfif council IS "#getdata.council#"> selected</cfif>>D 558</option>
                <option value="D 562" <cfif council IS "#getdata.council#"> selected</cfif>>D 562</option>
                <option value="D 581" <cfif council IS "#getdata.council#"> selected</cfif>>D 581</option>
                <option value="D 583" <cfif council IS "#getdata.council#"> selected</cfif>>D 583</option>
                <option value="D 597" <cfif council IS "#getdata.council#"> selected</cfif>>D 597</option>
                <option value="D 598" <cfif council IS "#getdata.council#"> selected</cfif>>D 598</option>
                <option value="D 599" <cfif council IS "#getdata.council#"> selected</cfif>>D 599</option>
                <option value="D 628" <cfif council IS "#getdata.council#"> selected</cfif>>D 628</option>
                <option value="D 686" <cfif council IS "#getdata.council#"> selected</cfif>>D 686</option>
                <option value="D 698" <cfif council IS "#getdata.council#"> selected</cfif>>D 698</option>
                <option value="D 848" <cfif council IS "#getdata.council#"> selected</cfif>>D 848</option>
                <option value="D 862" <cfif council IS "#getdata.council#"> selected</cfif>>D 862</option>
                <option value="D 870" <cfif council IS "#getdata.council#"> selected</cfif>>D 870</option>
</cfoutput>
            </select>
i dont know where i am making mistake and i observered one behavoir that if i have less options it is working but not with many why like that , please help me in this
Thanks

Seems to me your conditionals should look something like this:
<option value="Division"<cfif getData.council is "Division"> selected="selected"</cfif>>Division</option>
<option value="Facility"<cfif getData.council is "Facility"> selected="selected"</cfif>>Facility</option>
Your condition is the same for every option, and would likely never evaluate to true:
<cfif council IS "#getdata.council#"> selected</cfif>
getData.council will be "Division" or "Facility" or "District D" or ...
... but it would never be "council".
HTH.
Charlie

Need help with a SELECT statement

Dear forumers,
I'm a newbie in ABAP and I'm trying to figure out what the following line means (in bold letters):-
SELECT SINGLE STAT2 FROM PA0000 INTO PA0000-STAT2
WHERE PERNR = ITAB_DATA-STAFF_NO.
Does this mean that the single data from the STAT2 field is selected and then placed back into the same field (doesn't quite makes sense, right)?
Please help and many thanks in advance!

SELECT SINGLE STAT2 FROM PA0000 INTO PA0000-STAT2
WHERE PERNR = ITAB_DATA-STAFF_NO.
Does this mean that the single data from the STAT2 field is selected and then placed back into the same field (doesn't quite makes sense, right)?
it sense very much right.
have you heared about table buffer concept?
here this concept exactly comes.
try with this below code:
TABLES:pa0000."tables must be decleare
SELECT SINGLE STAT2 FROM PA0000 INTO PA0000-STAT2.
write:PA0000-STAT2.
and since you are using select single than you should be use much key as much possible for getting accurate data.other wise system will pick first data which match your where condition.
Amit.

Need help : cannot anymore select local info in site definition only remote

Hi
I made the mistake choosing in site deffintion for remote info and not local info
Now it seems impossible to reverse it cannot anymore select local info in site definition only remote
So now I can not make the site normally.
I've closed dreamweaver a couple times and tried it again and even my pc but it seems to be something irreparable?
Does anyone know a better idea than reinstall?
thank you
Paul

You are on the Basic Tab of the Site definition dialog in DW CS3. Unfortunately, that's also the more confusing way to define a site. Nevertheless, you'll note that there are 3 selections across the top of the dialog:
1. Editing Files
2. Testing Files
3. Sharing Files
Have you already filled out the first two?
A site definition in DW *could* only have the first of those three filled out - you really only need the local site defined until you are ready to upload your files (assuming you are only creating static pages - that is, pages without server scripting).
To define most remote sites, all you need to do is to select that you connect to your remote server using FTP, and then to state the folder within which your website files are stored on the remote server (often this is a folder called 'www' or 'wwwroot' or 'public_html').
In my mind, the better way to define a site is to go right to the Advanced tab - it's less confusing because you just fill in all of the fields without going through this 'wizard-type' interface....
So - does that help at all?

Need help AT LINE SELECTION

Similar Messages

Maybe you are looking for