Need help converting this html code into code that will work as a flash button

I have some html code that is for a button in html that when
pressed sends you to a certain url but also somehow adds an 'id
value' and a 'website value'.
How can I convert this code and or put it into a flash
button?
Disregard the gif info...that's just for the html graphic
that goes for the button.
[HTML]<form
action="https://secure.verotel.com/cgi-bin/vtjp.pl"
method="post">
<input type=hidden name=verotel_id
value="9804000000840231">
<input type=hidden name=verotel_website value="55461">
<center>
<input type="image" src="
http://buttons.verotel.com/join/button_00010155461.gif"
alt="Signup NOW!">
<img src="
http://buttons.verotel.com/signup/tbutton_55461.gif"
border="0" width="1" height="1" alt="">
</center>
</form>[/HTML]

What you want to do might look something like this:

Similar Messages

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

Need help converting Excel IF statement into CASE WHEN statement for Oracle

Hi,
Hope someone can help I have tried various ways of getting this to work, to no avail!
Bascially I have some figures that are minus figures, and I need to add them together to get a movement figure, but I need to treat the minus figures as minus, if that makes sense, rather than the usual... a minus and a minus makes a plus.
For example:- Budget Figure = -1% and Actual Figure = -68% so the movement needs to be -69%.
The IF statement I have been using in Excel is the following:-
=IF(FO110<0,(FP110-(IF(FO110=0,1,FO110)*-1)),FP110-IF(FO110=0,1,FO110))
Which when using the figures as above = -69%
Cell FO = The Budget Figure
Cell FP = The Actual Figure
However, when I created the CASE statement in Oracle, the figure in the query comes back as -0.67, which is oviously not what I want to happen when both actual and budget are minus figures; however when they are a minus and a plus, it works perfectly fine.
Any help on this would be most appreciated!
Kind regards,
Annmarie

Happy I did'n mess something up :)
Nevertheless, don't show it too much around because
case when budget < 0
     then actual - case when budget = 0 /* will never happen */
                        then 1           /* will never happen */
                        else budget
                   end * (-1)            /* -budget * (-1) remains only */
     else actual - case when budget = 0
                        then 1
                        else budget
                   end
endso at least try the following (if case is more readable as decode for you). Let's hope it works as I don't have a Database at hand
case when budget < 0
     then actual + budget
     else actual - case when budget = 0
                        then 1
                        else budget
                   end
end Regards
Etbin

Need help converting MS SQL query into Oracle, Function 'WHERE' issues

SELECT PERS_NBR, PAY_ID, PAY_CODE, LOGICAL_DATE, LOGICAL_DATE AS END_DATE, PCNAMES + REPLICATE(',', 39 - (LEN(PCNAMES) - LEN(REPLACE(PCNAMES, ',', ''))))
AS PC_NAMES_FINAL
FROM (SELECT DISTINCT A.PAY_ID, A.PAY_CODE, A.PERS_NBR, A.LOGICAL_DATE, PCNAMES = substring
((SELECT TOP 10 ',' + PC_NAME + ',' + SUBSTRING(CAST(B.VALUE AS VARCHAR), 0, LEN(CAST(B.VALUE AS VARCHAR)) - 2)
FROM T_PAY_CAT_RECORD B
WHERE B.PERS_NBR = A.PERS_NBR AND
B.LOGICAL_DATE = A.LOGICAL_DATE FOR XML path(''), elements), 2, 500)
FROM T_PAY_CAT_RECORD A, T_PERSON P
WHERE A.PERS_NBR = P.NBR) FINAL
Edited by: 919969 on Mar 9, 2012 3:45 PM

Hello
Like any language you need to understand what the messages coming from the syntax check are saying...
XXXX> SELECT PERS_NBR,
2          PAY_ID,
3          PAY_CODE,
4          LOGICAL_DATE,
5          LOGICAL_DATE AS END_DATE,
6          PCNAMES || LPAD(',', 39 - (LENGTH(PCNAMES) - NVL(LENGTH(REPLACE(PCNAMES,',')),0)),',') AS PC_NAMES_FINAL
7    FROM (
8           SELECT PAY_ID,
9                   PAY_CODE,
10                   PERS_NBR,
11                   LOGICAL_DATE,
12                   SUBSTR(
13                          RTRIM(XMLAGG(XMLELEMENT(e,PC_NAME || ',' || SUBSTR(VALUE,1,LEN(VALUE) - 2),',').EXTRACT('//text()')),',') PCNAMES
14                          2,
15                          500
16                         )
17             FROM (
18                    SELECT A.PAY_ID,
19                            A.PAY_CODE,
20                            A.PERS_NBR,
21                            A.LOGICAL_DATE,
22                            A.PC_NAME,
23                            ROW_NUMBER() OVER(PARTITION BY A.PERS_NBR,A.LOGICAL_DATE ORDER BY 1) RN
24                      FROM T_PAY_CAT_RECORD A,
25                            T_PERSON P
26                      WHERE A.PERS_NBR = P.NBR
27                   )
28             WHERE RN <= 10
29             GROUP BY PAY_ID,
30                      PAY_CODE,
31                      PERS_NBR,
32                      LOGICAL_DATE
33          ) FINAL
34 /
                        RTRIM(XMLAGG(XMLELEMENT(e,PC_NAME || ',' || SUBSTR(VALUE,1,LEN(VALUE) - 2),',').EXTRACT('//text()')),',') PCNAMES
ERROR at line 13:
ORA-00907: missing right parenthesisIf you use something like SQL*Plus or SQL Developer, they will give you the error stack which will point you to the source of the problem.
It's saying missing right parenthesis. Start by finding out if we've got all out matching brackets. Counting from the start of that statement i.e. SUBSTR on line 12, we have 7 open brackets and 6 close brackets. So there does appear to be a problem with brackets. However if we take a step back and look at lines 12 to 16, this is actually a single statement. It's a call to the SUBSTR function and within it it has calls to RTRIM, XMLAGG etc. For the statement as a whole there are the same number of left and right parenthesis so the problem is related to something else. Something that is leading the syntax check to think it has reached the end of a statement and hasn't found enough closing parethesis.
The issue here appears to be that we have the token PCNAMES at the end of line 13 but syntactically that's not correct. We can't have that token there because it's appearing in the middle of a function call. PCTNAMES is actually a column alias but it's just in the wrong place. We need it to be an alias for the whole expression from line 12 to 16. So make the change and see what happens...
XXXX> select PERS_NBR,
2          PAY_ID,
3          PAY_CODE,
4          LOGICAL_DATE,
5          LOGICAL_DATE AS END_DATE,
6          PCNAMES || LPAD(',', 39 - (LENGTH(PCNAMES) - NVL(LENGTH(REPLACE(PCNAMES,',')),0)),',') AS PC_NAMES_FINAL
7    FROM (
8           SELECT PAY_ID,
9                   PAY_CODE,
10                   PERS_NBR,
11                   LOGICAL_DATE,
12                   SUBSTR(
13                          RTRIM(XMLAGG(XMLELEMENT(e,PC_NAME || ',' || SUBSTR(VALUE,1,LEN(VALUE) - 2),',').EXTRACT('//text()')),',')
14                          2,
15                          500
16                         ) PCNAMES
17             FROM (
18                    SELECT A.PAY_ID,
19                            A.PAY_CODE,
20                            A.PERS_NBR,
21                            A.LOGICAL_DATE,
22                            A.PC_NAME,
23                            ROW_NUMBER() OVER(PARTITION BY A.PERS_NBR,A.LOGICAL_DATE ORDER BY 1) RN
24                      FROM T_PAY_CAT_RECORD A,
25                            T_PERSON P
26                      WHERE A.PERS_NBR = P.NBR
27                   )
28             WHERE RN <= 10
29             GROUP BY PAY_ID,
30                      PAY_CODE,
31                      PERS_NBR,
32                      LOGICAL_DATE
33          ) FINAL
34 /
                        2,
ERROR at line 14:
ORA-00907: missing right parenthesisNOw we've got a new error. Again it's saying we've got a missing parenthesis but this time on line 14. The issue here is that line 13 is a parameter to the SUBSTR function but there is no comma on the end. What we actually have at the moment is a line that looks like so
RTRIM(XMLAGG(XMLELEMENT(e,PC_NAME || ',' || SUBSTR(VALUE,1,LEN(VALUE) - 2),',').EXTRACT('//text()')),',') 2,Which is just not formed correctly. We need a comma at the end of line 13 to state that this is the end of that line as a parameter.
XXXX> select PERS_NBR,
2          PAY_ID,
3          PAY_CODE,
4          LOGICAL_DATE,
5          LOGICAL_DATE AS END_DATE,
6          PCNAMES || LPAD(',', 39 - (LENGTH(PCNAMES) - NVL(LENGTH(REPLACE(PCNAMES,',')),0)),',') AS PC_NAMES_FINAL
7    FROM (
8           SELECT PAY_ID,
9                   PAY_CODE,
10                   PERS_NBR,
11                   LOGICAL_DATE,
12                   SUBSTR(
13                          RTRIM(XMLAGG(XMLELEMENT(e,PC_NAME || ',' || SUBSTR(VALUE,1,LEN(VALUE) - 2),',').EXTRACT('//text()')),','),
14                          2,
15                          500
16                         ) PCNAMES
17             FROM (
18                    SELECT A.PAY_ID,
19                            A.PAY_CODE,
20                            A.PERS_NBR,
21                            A.LOGICAL_DATE,
22                            A.PC_NAME,
23                            ROW_NUMBER() OVER(PARTITION BY A.PERS_NBR,A.LOGICAL_DATE ORDER BY 1) RN
24                      FROM T_PAY_CAT_RECORD A,
25                            T_PERSON P
26                      WHERE A.PERS_NBR = P.NBR
27                   )
28             WHERE RN <= 10
29             GROUP BY PAY_ID,
30                      PAY_CODE,
31                      PERS_NBR,
32                      LOGICAL_DATE
33          ) FINAL
34 /
                          T_PERSON P
ERROR at line 25:
ORA-00942: table or view does not existNow we have a new error but this time it's because I don't have the t_person table on my database. Syntactically the statement above is now correct so it should work on your system.
HTH
David
Edited by: Bravid on Mar 12, 2012 10:20 AM

Need help choosing optimal hardware for a laptop that will run AE CS5

BACKGROUND INFO (Questions listed below)
I need some help figuring out the best hardware configuration for a new laptop. I’m a student at a design school and I will be using the laptop to mainly run After Effects and to a lesser extent Photoshop and Illustrator. I don’t need to worry about 3D rendering software or Premier Pro. I am primarily interested in getting the best performance during editing. I am not looking for the best performance for final output. I would prefer to sacrifice final output times for better editing/interface performance.
I will be working with standard definition content and perhaps HD up to 720p on occasion. I do not need to operate in resolutions higher than 720p. My projects are generally animation and use many sources and many layers.
I’ve been reading up on optimal hardware configurations for CS5 but my understanding is still a little foggy and I would like to use this thread to figure out how to build the best machine for my budget. The budget is about $1400 to $1600 CANADIAN after tax.
I DON’T need help finding the laptop. I will search for it on my own. I just need to understand the best hardware to purchase within my budget.
I realize that it is probably impossible to buy the laptop I want with the hardware configuration I need “off the shelf”. Instead I will be looking for a good base model (~$900-$1100) and I will purchase the necessary hardware upgrades separately. I will not be purchasing a Mac.
Right now I’m thinking of a machine built something like this:
- 15”-16” screen (17” models are too big/heavy)
- Mid to high end i5 processor OR entry level i7 quad core
- 8GB RAM (I would go to 12GB, but it’s hard to find a 15”-16” laptop with 3 memory slots)
- SSD to replace HDD (However, if possible, I would like a laptop with dual HDD support or swap the optical drive for another HDD. If I had access to 2 drives, I would have and HDD/SSD combo).
- Medium/high end NVIDIA GPU to take advantage of OpenGL while editing.
QUESTIONS
1) Does the “Render Multiple Frames Simultaneously” option enhance general editing performance (applying filters, scrubbing through the timeline, reverting history states)? Or does it ONLY help speed up RAM previews and final output? Does it reduce the length of RAM previews?
1b) Is this option even necessary to enable on 64bit systems? (As far as I understand it was used to solve a problem where 32bit systems/software would only recognize 4GB of RAM per instance of AE).
1c) If I turn this option on to help with RAM previews, would I be hindering general editing performance in any way? Or does this option have basically zero drawbacks?
2) How come “Actual CPUs that will be used” will read 0 even if the sum total of RAM assigned to the CPUs plus the RAM reserved for other applications is less than the total available system RAM (on a 64bit system)? For example, I currently have 4GB RAM and 2 installed CPUs. I have 1.5GB reserved for other programs and when I set 0.75GB per CPU both CPUs are used. However when I set 1GB per CPU then 0 CPUs are used, even though the total RAM adds up to only 3.5GB.
CPU
3.) Considering the fact that I am more concerned with smooth performance while editing rather than final output speeds, would it be better to get a dual core i5 clocked around 2.5 or a quad core i7 clocked around 1.8?
4.) What is the difference between an i3 and an i5 processor even if they are clocked at the same speed? How does an i5 460M compare on the grand scheme of things?
RAM
6.) Should the quantity of RAM that I get (8GB vs 12GB) be based on the number of cores in my CPU? If so, how should I be calculating optimal RAM based on # of cores. Should I also be counting threads, or just actual physical cores?
STORAGE/SWAP
7.) Should I replace the HDD with an SSD? I'm looking for snappy interface performance while editing. I would think that if the RAM fills up it would be best to have the SSD for scratch/cache.
8.) What performance benchmarks are most important when considering an SSD for After Effects? (4k writes? IOs per second? Max read/write?)
9.) I can afford the OCZ Vertex2 120GB SSD. Would this be a good choice if an SSD is recommended?
10.) Would it be better to have 8GB of RAM and an SSD, or 12GB of RAM and an HDD? Explain why.
GPU
10.) After Effects utilizes OpenGL to enhance editing performance. I will not really be using Premier Pro, so catering to the CUDA Mercury Engine is not a concern. Do high end gaming cards provide significant gains in OpenGL performance? Or do OpenGL performance gains taper off around the mid-range GPUs? (i.e. can you justify buying a high end GTX 260M graphics card for enhanced editing performance versus an "entry level" dedicated card like the 310M?)
11.) What hardware specs are most important when considering a GPU for editing performance in AE? (Memory size? # of Pixel shaders? Core speed? Shader speed?)
Thanks so much for any answers you can offer to these questions.

Please make sure that you've read through this page and what it points to.
> 1) Does the “Render Multiple Frames Simultaneously” option
enhance general editing performance (applying filters, scrubbing through
the timeline, reverting history states)? Or does it ONLY help speed up
RAM previews and final output? Does it reduce the length of RAM
previews?
It only increases rendering speed for RAM previews and rendering for final output. In After Effects CS5, it doesn't decrease the length of RAM previews. (In CS4, it does.)
1b) Is this option even necessary to enable on 64bit
systems? (As far as I understand it was used to solve a problem where
32bit systems/software would only recognize 4GB of RAM per instance of
AE).
You misunderstood. Yes, it's still relevant on 64-bit computers. Moreso, in a way. (I'd rather not spend my entire Sunday writing out detailed answers to satisfy idle curiosity, so I'm not going to give all the technical detail to that answer.)
> 1c) If I turn this option on to help with RAM previews,
would I be hindering general editing performance in any way? Or does
this option have basically zero drawbacks?
It takes a small but nonzero time for the background processes to start up when they need to be used and shut down when they're done. And as they sit waiting, they take up a little bit of memory. So, it's not exactly correct to say that there are no downsides to leaving it on. But it's close. I leave it on.
> 2) How come “Actual CPUs that will be used” will read 0 even
if the sum total of RAM assigned to the CPUs plus the RAM reserved for
other applications is less than the total available system RAM (on a
64bit system)? For example, I currently have 4GB RAM and 2 installed
CPUs. I have 1.5GB reserved for other programs and when I set 0.75GB per
CPU both CPUs are used. However when I set 1GB per CPU then 0 CPUs are
used, even though the total RAM adds up to only 3.5GB.
4GB - 1.5GB for other software leaves 2.5 GB for After Effects.
If you have 1GB assigned per background CPU, then the foreground takes 1.2x that = 1.2GB. That leaves 1.3GB for background processes, which is enough for one background process. There's no point in starting only one background process to do rendering, so it doesn't bother. (Note: When background processes are rendering, the foreground process isn't rendering.)
> 3.) Considering the fact that I am more concerned with
smooth performance while editing rather than final output speeds, would
it be better to get a dual core i5 clocked around 2.5 or a quad core i7
clocked around 1.8?
Get the quad-core. That gives you a greater total number of cycles. And After Effects works very well with mutliple processors, even beyond Render Multiple Frames Simultaneously multiprocessing. An entirely unrelated sort of multiprocessing (multithreading) spreads work out to multiple processors.
> 6.) Should the quantity of RAM that I get (8GB vs 12GB) be based on the number of cores in my CPU? If
so, how should I be calculating optimal RAM based on # of cores. Should
I also be counting threads, or just actual physical cores?
The optimum amount is the amount that you can cram into the computer. I'm not kidding. Spend your budget on RAM until you have 4GB installed per processor (and I'm counting the virtual processors due to hyperthreading). If you have a quad-core, that's 8 CPUs with hyperthreading, so the optimum amount of RAM installed is 32GB. You can work with less, but you did ask about optimum. For HD work (i.e., 1920 pixels across), you're OK with more like 3GB installed per CPU. That's what I have at home: 24GB in a quad-core. You're going to assign 2/3 or so of the RAM to After Effects, so 3GB installed per CPU is 2GB per core for HD work in After Effects.
> 10.) Would it be better to have 8GB of RAM and an SSD, or 12GB of RAM and an HDD? Explain why.
12GB of RAM. Because After Effects likes RAM. (If you're thinking of deliberatly using virtual memory to swap memory to the hard disk, don't. That's a performance killer.)
> 10.) After Effects utilizes OpenGL to enhance editing performance.
Not really. If you're on a limited budget, don't even think about the GPU until you've already got the most RAM, the fastest CPUs, the largest number of CPUs, two fast hard disks, and a couple of good monitors. Then, and only then, should you even consider getting soemthing beyond a non-stock graphics card. Yes, OpenGL can be used to accelerate some things, but that's only for the low-fidelity preview renderer. (Pardon the bluntness, but I want to make sure that you heed this.)

I NEED HELP CONVERTING A MOVIE FILE INTO A DVD

So this is my problem.
I have FCE and made a movie. Now, after i rendered it and used iDVD to make a DVD, it works and everything, BUT when i play back the DVD on any DVD player, the picture is not that great and at points looks like a bad TV reception.
I have a SONY handycam and this is what i used to captured the footage so i dont know if i need a HD camcorder. So my question is how do i make my DVD's look smooth??? does it have to do with the way i am rendering the movie, saving it, capturing it????Please let me know. Thank you

When you have finished editing in FCE this is the setting you MUST use:-
File>Export>QuickTime Movie. (For speed, deselect the "Make Movie Self-contained" box).
You must NOT use QuickTime CONVERSION.
The QT Movie is then dragged into iDVD etc.
This will produce good quality DVDs.
If you get jitter you may have to apply FCE's De-interlace Filter.

Need help in installing the camera raw update that will cover my Sony Alpha 77 & let me open & edit them in CS5 Extended.

I have the Photoshop CS5 Extended installed, but have just got around to using it to size some photos for an internet circle only to find that I cannot open my cameras Raw files, a Sony Alpha 77. The camera is obviously to new for the software installed with my version of CS5.
Can anyone help me out please?
Paul.

Hi Paul
Your camera was supported in Adobe Camera Raw 6.5 but you could install the last update for CS5 which is version 6.7.1
Use one of the links below to download and install.
Mac
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&PID=2159 997
Windows
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows&PID=215999 7

Convert Windows Media Player to something that will work on the IPOD

I just bought my I-Pod today, and I don't know what type of video will play on it. I was trying to upload some window media player files, but no luck. How do I get my Windows Media Player files to work on my I-Pod. Oh, yes, my computer is a Mac. I'm on OS X 3-9.
Thank you for your help!
John

Hi All, Thanks so much for responding to my question...not a powerpoint -- so forget that. I have tried all of your suggestions. First, the h264 route: creates a file that is something on the order of 3X the size of the .mov (which was too big to begin with). Took forever -- became such a size that I couldn't get it onto a flash drive (11gb became 30+gb).
Now, if necessary, I'll take my machine to theirs and make a transfer via ethernet -- but that doesn't account for backup copies....
Second, I made an MPEG2 version and stored it on DVDs. They would not play on the PC either. This is the way I have delivered to non-broadcast clients for years and has always worked. I use the DVD MPEG2 Best Quality 90 minutes and AAC audio settings.
I looked at the flip4mac site and of course, the version I need is the most expensive. There must be some alternative to spending $180 to convert these files.
Again I thank you for your suggestions and taking the time to respond to my query.

I want to convert this excel formula into a formula that works in Numbers =INDEX(Codes!$B$1:$B$9998;MATCH(TRUE;ISNUMBER(SEARCH(Codes!$A$1:$A$9998;'Curren t Account'!E4358));0))

I want to convert this excel formula into Numbers formula =INDEX(Codes!$B$1:$B$9998;MATCH(TRUE;ISNUMBER(SEARCH(Codes!$A$1:$A$9998;'Curren t Account'!E4358));0))

Without knowing the structure of the spreadsheet, or what e3xactly you are trying to do, it would be hard to advise. however, have a look here: http://help.apple.com/numbers/ipad/2.0/

I need help with this code error "unreachable statement"

the error_
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errors
import java.util.*;
import javax.swing.*;
import java.awt.*;
public class Tools//tool class
private int numberOfToolItems;
private ToolItems[] toolArray = new ToolItems[10];
public Tools()//array of tool
numberOfToolItems = 0;
for(int i = 0; i < toolArray.length; i++)//for loop to create the array tools
toolArray[i] = new ToolItems();
}//end for loop
}//end of array of tools
public int search(int id)//search mehtod
int index = 0;
while (index < numberOfToolItems)//while and if loop search
if(toolArray[index].getID() == id)
return index;
else
index ++;
}//en while and if loop
return -1;
}//end search method
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0;
int index;
index = search(id); <-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
}//end delete method
public void display()//display method
for(int i = 0; i < numberOfToolItems; i++)
//toolArray.display(g,y,x);
}//end display method
public String getRecord(int i)//get record method
// return toolArray[i].getName()+ "ID: "+toolArray[i].getID()
}//end getrecod
}//end class
Edited by: ladsoftware on Oct 9, 2009 6:08 AM
Edited by: ladsoftware on Oct 9, 2009 6:09 AM
Edited by: ladsoftware on Oct 9, 2009 6:10 AM
Edited by: ladsoftware on Oct 9, 2009 6:11 AM

ladsoftware wrote:
Subject: Re: I need help with this code error "unreachable statement"
F:\Java\Projects\Tools.java:51: unreachable statement <-----------------------------------------------------------------------------------------------------------------THIS
int index;
^
F:\Java\Projects\Tools.java:71: missing return statement
}//end delete method
^
F:\Java\Projects\Tools.java:86: missing return statement
}//end getrecod
^
3 errorsThe compiler is telling you exactly what the problems are:
public int insert(int id, int numberInStock, int quality, double basePrice, String nm)//insert method
if(numberOfToolItems >= toolArray.length)
return 0; // <<== HERE you return, so everyting in the if block after this is unreachable
int index;
index = search(id); //< -----------------------------------------------------------------------------------------------------------------HERE
if (index == -1)
toolArray[index].assign(id,numberInStock, quality, basePrice,nm);
numberInStock ++;
return 1;
}//end if index
}//end if toolitem array
return -1;
}//end insert method
public int delete(/*int id*/)//delete method
// <<== HERE where is the return statement?
}//end delete method
public String getRecord(int i)//get record method
// return toolArray.getName()+ "ID: "+toolArray[i].getID() <<== HERE you commented out the return statement
}//end getrecod
}//end class

Need help - Error: MDN is not found (code: 33)

Whenever I open my Verizon Cloud it says "Error: MDN is not found (code: 33). I NEED HELP! This phone has to be sent back soon becuase I got a replacment. HELP HELP HELP
I have a galaxy s3
Subject line edited into post.
Message was edited by: Admin Moderator

Make sure both phones (iPhone, Moto X, Droid X, Samsung Galaxy, Nokia, Motorola) are connected to the same wifi .. on the new device you will first have to download and install the updates by going to Settings >> About Device >> Updates. Once the updates have been installed you will not receive the error "MDN is not found (code: 33). You can proceed to pair the devices and transfer your content. It will also give the option to select the type of content (contacts, photos, video) you want to transfer.
Thanks www.strongpurpose.com for helping find this solution .. they made it easy for me to get my content transferred so I can get back to the important stuff .. Follow Your Passion!

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I need help converting a PDF to a word file. I purchased Acrobat for this purpose?

I need help using this download. I purchased Acrobat because I need to convert a PDF file to a word file. Can you give me instruction on how to do this.
Thank you,

Open the file in Acrobat, use File --> Save As... --> Microsoft Word.
Mylenium

Please I really need help with this video problem.

Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
          preloaderBar.visible = true;
          preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
          var perc:Number = e.bytesLoaded / e.bytesTotal;
          preloaderBar.percent.text = Math.ceil(perc*100).toString();
          preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
          preloaderBar.percent.text = '';
          preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
          if (filme != "sets.swf")
                      filme = "sets.swf";
                      carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
          if (filme != "home.swf")
                      filme = "home.swf";
                      carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
          btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
          btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
          btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
          btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
          btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
          btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
          trace(stat.info.code);
meta.onMetaData = function(meta:Object)
          trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
            ns.resume();
            t.removeEventListener(TimerEvent.TIMER,timeHandler);
            t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank you

My first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/

Need help converting this html code into code that will work as a flash button

Similar Messages

Maybe you are looking for