Need help exporting (CS4)

Everytime I try to export a file it either exports wrong (posterizes ny movie) or gives me errors.
I want to export my film uncompressed. I tried setting the video codec to "none" but it posterizes (or really it desaturates it and adds random splotches of color). I then tried using Uncompressed YUV 10bit, it rendered once nicely, but I realized an error I had made in the video, fixed it and tried again only to recieve error after error after error. It doesn't even tell me what the error is as far as I can tell, it just gives me the yellow triangle with an exclamation point in it.
I tried recreating the project, but it still isn't working.
Below is a screengrab of the YUV settings.
[IMG]http://i19.photobucket.com/albums/b168/Erailea2/grab.jpg[/IMG]

Try encoding to an entirely new (unique) filename.
Maybe try exporting progressive fields. ( What is the source?)
What is the 853 x480 Custom all about?
Try a standard preset.

Similar Messages

I need help exporting pages newsletters as single page PDF's or as a .jpeg for an online photo book.

need help exporting pages newsletters as single page PDF's or as a .jpeg for an online photo book.

No same idea: 1. Look 2. Try.
This is in Mavericks:
Peter

Need help with CS4 transitions

Hi,
I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime, it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
Terry Lee Martin
Date: Sat, 22 Aug 2009 23:15:55 -0600
From: [email protected]
To: [email protected]
Subject: Need help with CS4 transitions
From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip. That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player. What's the point?
>

I need help exporting Apple Mail messages to Outlook for MAC 2011

Good morning,
I need help exporting Apple Mail messages to Outlook for MAC 2011. Please....

It is possible to do this without external tools, but it is a tremendous faff. See
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/import-ema il-from-mail-to-outlook-2011/5e858173-e1f4-4adc-99d7-253cc467169d?page=2 for details.
The easiest way, however, is to use Mail Exporter Pro https://itunes.apple.com/us/app/mail-exporter-pro/id675131616?mt=12 which will convert the email for you from one format to the other, and comes with an excellent manual.
A third possibility is to connect Apple Mail to an email account via IMAP (this doesn’t have to be your usual account, you can just create a Gmail account for the purpose) . Copy all the messages into it and they will be uploaded. Then connect Outlook 2011 to the same account, via IMAP again, and let the messages download, then copy them to wherever you want to keep them and disconnect from that account. This is slow but preserves the attributes of your email (e.g. read/unead) better than any other method.

Need Help Exporting Previous Recipients to File

Need help exporting "Previous Recipients" to file not to Contacts. Sorry if this is a duplicate, I can't find this answer
anywhere for Maverick. Thanks.

Hi,
This'll do what you're after:
$out = @()
$mbxs = Get-Mailbox -Identity '*smith*'
foreach ($mbx in $mbxs) {
$whenCreated = $mbx.WhenCreated
$out += Get-MailboxStatistics -Identity $mbx.SamAccountName |
Select DisplayName,TotalItemSize,ItemCount,LastLoggedOnUserAccount,LastLogonTime, @{n="WhenCreated";e={$whencreated}}
$out | Sort DisplayName | Export-Csv .\mbxStats.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Need help need help exporting epub to iTunes Producer

Need help need help exporting epub to iTunes Producer. Nothing will load only get that little spinning wheel.

It's not necessary to post a second time. I'm locking this version so others may reply at the first thread you created:
Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer

I need help export on dvd premiere pro cs4

Hi, I am a new consumer of Premiere Cs4 and I need help. I have used, in my life, only simple authoring programs as well as Pinnacle studio and now I have some problems with Premiere. I hope that someone help me and it answer my simple questions.
1) In studio I knew, in real time, how much space the project occupied on the DVD but in premiere? How I can know speedily how much space occupied my project? I have noticed that the space occupied is visualized in encore but it is the unique methods for to have this information?
2) Because the space occupied from the project not change when I change the preference of project? An example: I create a project and I export it in encore. I set bitrate 8 and the project occupied 50mb. If I change the bitrate, an example 6, the space occupied not change! Why?
thanks

Projects don't have a bitrate. You choose your desired bitrate when you export.
You will find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Need help exporting animation to Wordpress (I've looked at all the tutorials I could find).

Alright, I've been working on a slide show animation for sometime now, but I need to export it to wordpress and I can't exactly understand how to do it correctly. I've even used the edge wordpress plugin, but it doesn't seem to work at all (I tried on two different sites, first seems to be a projram script error, the other site didn't upload anything). I've done a few of the tutorials floating around but none of them make sense to me, I don't know exaclty which parts of code to edit and in which clients to work them in. If someone could help make these five hours of confusion make sense for me that that would be amazing.
Where should I start on trying to get my animation to wordpress?

I've come with the same issue myself. I love Adobe Edge and i find it dead easy to make wonderful stuff there, though making it work in Wordpress has become a challenge. I followed the instructions in this video and in this guide and they seem to work only if you happen to use wordpress with a plain theme with no fancy jquery animations and functionality using these libs. I tried intergrating an Edge animation in my wordpress site, though because i happen to use a theme with a slider which uses jquery, when following the instructions step by step then neither the slider worked neither the edge animation itself. I found somewhere that you need to edit some .js libs using the noconflict mode though that did not work either (it was an example for joomla).
I tried installing the Edge Suite wordpress plugin which is still in developing stage. You need to export your Edge composition using the File > Publish tool found in edge in order to import the .aom files. Unfortunatelly no luck with that. I'm still looking for a solution in order to make animations for my website. I sent a tweet to Adobe Edge and they refered me to the support forums. Uhg!
I'm sure there's a workaorund using the .js libraries. Im not experienced with them so i'll have to wait for a solution to come about. I'm sorry for not helping though be sure to check the links above

Need help exporting large file to bitmap format

I have a large file that I need to export to a bitmap format and I am experiencing unknown "IMer" errors, memory and file size limitations.
The file contains only one artboard of size around 8000 pixels by 6000 pixels. I can successfully export as a png at 72dpi giving me a 100% image of my AI file. However I need to export an image at 200% of the AI file. If I export as a png at 144dpi to achieve this I get the following error(s)
"The operation cannot complete because of an unknown error (IMer)" or "Could not complete this operation. The rasterised image exceeded the maximum bounds for savung to the png format"
I have tried exporting as tiff, bmp and jpeg but all give "not enough memory" or "dimensions out of range" errors.
Does anyone know the limitations with AI for saving large files to bitmap format?
Does anyone have a workaround I could try?

You could try printing to Adobe Postscript files.
This will actually save a .ps file and you can scale it to 200% when doing so. You'll need to "print" for every image change.
Then open a Photoshop document at your final size (16000x12000 pixels) and place or drag the .ps files into the Photoshop document.
I just tested this and it seems to work fine here. But, of course, I don't have your art, so complexity of objects might factor in and I'm not seeing that here.
And you are aware that Photoshop won't allow you to save a png at those dimension either, right? The image is too large for PNG. Perhaps you could explain why you specifically need a png that large???

Need help exporting .mov files for editing in PE3

hi,
i'm trying to export HD .mov files from an Aiptek GO-HD camcorder that seems to record in QT format with some funky codecs. I need to export it into a format that i can edit on a PC using Premier Elements 3.0. The few tests i've run have shown a huge increase in size when exporting from .mov to .avi (100m to 30 GB).
Does anyone have any suggestions or experience doing this?

You just need to open the .mov file with Elements.
You don't need to convert it using QuickTime Pro
first.
Premiere may "convert" it to some other format to
allow editing (I don't know) and that would only take
some time at import.
HD files are anywhere from 10 to 60 MB's per second
(some even higher) so a DV version will drastically
increase in file size.
What, besides editing, is the goal of your work?
that doesn't work with this camcorder. apparently the encoding is called QT, but it really isn't. i have to export into something else in order to edit.
the goal of my work is to convert choppy family video into something clean that i can share with friends and family via CD / DVD (not streaming on net).

Need help exporting in cs4

I am looking into a film major, or a television and brodcast major.
i biught a sony XR150 to film some stuff for portfolio (short films. I work at a TV station near me, so i can use the stuff i produced also.)
for some reason, i am having a MAJOR problem exporting my .mts footage. I can get it into premiere fine, i am just looking for a way to export it, and have it look as good as raw footage does.
I have done uncompressed avi, and that makes it.. streak? a bit. (hard to explain) and uncompressed mov, but that gives it a noise type look to it (yes like old tvs)
I have never delt with exporting .mts before, and i would really appreciate some export settings. Thank you all for helping me!
PS: I am on my phone, so i have some grammar mistakes!

no. when i do uncompressed avi. The video streaks. Like, lines dont match up. It is hard to explaine. All i know is uncompressed is still givingme a major loss in quality.
The uncompressed avi doesnt lose too much quality, but no matter what resolution i do with it, it puts black bars on top and bottom.

Need help exporting videos in final cut

Hi guys, I have been using Final Cut for about 6 months now and I am STILL having trouble exporting my files. I mean there are so many options I am unsure which one to choose.
This current wedding video I did for a client...due to my lack of expertise, the footage turned out very grainy. I still put together a decent video, and it was time for me to export the video in order to upload on vimeo. I do not know the proper settings to use when uploading to vimeo, so I just use Final Cut's Quicktime Conversion and I just export the file with LAN/Intranet settings. When I saw this footage, I noticed the grain was ALL GONE... but has aliasing
question # 1...why did this happen?
If I export the file as quicktime movie, the grain is all still there.
When its time for me to burn the movie, exported sending the the file to compression, and then using DVD: Best quality 90 minutes setting
when I saw the footage, GRAINY again!!
I threw the smaller file which had no grain on it but had aliasing...and the dvd, looked okay but the aliasing was still there, so obviously I'm doing SOMETHING wrong..
here's the file
http://vimeo.com/5312419
pass: vimeoaccount101
Question #2: What is the best way for me to export my movies so that I see minimal grain and no Aliasing..
Thanks!

First of all let me say you do great work. I was very impressed! I would hire you to do my wedding.
#1 As far as vimeo is concerned if you go to their help section they have very clear instructions as to the best specs for uploading video.
#2 With the graininess & Aliasing, we need to know more info. What camera/s did you use and at what settings(e.g. interlaced, progressive, etc.)
Off subject, I am curious to know how you achieved your pan effect. Was it hand held, did you use a glidecam? Once again I am a fan of how you pick and choose your shots...great work! You should be doing movies, not weddings.

Need help exporting video

(I have Premiere Pro CS4 and I'm pretty new to it)
All my videos are 640 by 480 AVI files and the frame rate is 30fps. What are the best settings to export these videos at?
For some reason when I set the dimensions at the beginning to 640 to 480, and then I set the Pixel Aspect Ratio to "Square Pixels" because that is the only setting that will give me a 4:3 ratio, which is what I need since the videos are 640 by 480. But when I go to 'Export', the dimensions have been changed to 720 by 480, and I can't change the settings. What should I do? (I'm trying to save them as AVI)

Can you give us the full details of these AVI files. If you do not have that, the great, free utility, G-SPOT will give it to you.
You will want to set your Project/Sequence to that. If necessary, choose Desktop for the Preset and then fill in all of the attributes to match your source footage.
What do you wish to Export to?
What is your delivery scheme?
That will determine your Export settings in AME. You will need to choose a Preset that matches that. You have probably chosen a DV Preset.
Good luck,
Hunt

Need help exporting ID file with TOC to EPUB.

I've been troubleshooting a file created in ID CS5.5 and then moved to CC. When I export to EPUB the TOC ends up at the end of the file rather than at the point where I originally inserted the TOC. The vendor I'm sending the EPUB to won't accept a file with the TOC out of place. I tried exporting to an HTML editor and moving the TOC there. (I'm no whiz at HTML though.) Now I see no way to import the file back into ID to export it as EPUB ( and doubt that's the best way to deal with this anyway). I'd deeply appreciate any suggestions!

First of all, a TOC is not only "The Toc". You need to distinguish between the dynamic Reader TOC and a optional TOC e.g. on page 3. While the first is generally required, the second is optional in most cases.
You must also distinguish whether the export is EPUB 2 or EPUB 3.
1. Assume you mean the dynamic TOC > InDesign will create the TOC on the right place, if you choose the TOC-Style during the export.
2. Assume you mean the TOC on page 3 > Here the content- or article-order is important! If you have a threaded story from page 2-100 and your TOC as a single frame on page 3 > InDesign will first export the content on page 2 AND the content of all threaded frames and at least your TOC on page 3.
3. Assume further your exported file is correct in most cases, you can change the order of your TOC in the EPUB directly in the content.opf file in the spine-area
To give you more help, I must have a look at your file.
Kai Rübsamen

Need help exporting Quicktime on FCE 3.5.1

I edit HDV on FCE 3.5.1 and every time i export Quicktime, it comes out looking squeezed and not widescreen, and only saves as Quicktime movie and not FCE movie file like it used to when i first got it. and also how can i export for ipod in widescreen format as well because it it doesn't do that any more, has this got to do with my last update? because i can't seem to import LiveType to FCE anymore it keeps giving me an error report, so i'm going crazy trying to figure this out can someone please help.

What format are you working in exactly? 1080i HDV is squeezed. You can change the display in QuickTime to 1920. You may need the QuickTime Pro player for that.
"only saves as Quicktime movie and not FCE movie file like it used to when i first got it"
Don't know when you first got it but in early versions of FCE the export function was called Final Cut Movie. It's now called QuickTime Movie. Either function does the same thing.
iPod compression was changed in QuickTime. You'll have to export for either iPhone or iPod and change the output size to a widescreen format.
You'll probably need to completely uninstall and reinstall LiveType. Not the LT media content, just the application and preferences and receipts.

Need help exporting (CS4)

Similar Messages

Maybe you are looking for