Need help identifying controller information in hyperdraw

Hello,
Sorry if this is a dumb questions, but I'm in the middle of a project and need help ASAP. In one of my tracks (Real Guitar) there is some form of controller information present at the start of the track and I have no clue what it is! Is there a preference/key command that shows all data in hyperdraw, and then lets you select it (similar to the way the matrix editor works if you double click in the background, and then click on a specific note?)
Thanks in advance for any help you can provide!

Jonathan,
I use the method that Jim suggested. I have the "H" key programmed for autodefine. (I've also got another two keys programmed to simply turn hyperdraw on and off for the selected region(s)). Autodefine is very cool. If there are, say, 4 different controllers in the track, hitting H the first time will show you the lowest-numbered controller; hit it again and it shows you the next higher number controller, and so on. The controller number is displayed in the lower LH area of the hyperdraw display for each region.
If a track contains controller information for multiple channels, you'll see two numeric values in the lower LH corner -- the controller number and MIDI channel for that controller, separated by a comma.

Similar Messages

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. This was the early 90's and I've been trying to hunt it down

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. It was animated, 2D i believe. This was the early 90's and I've been trying to hunt it down. I think there was some kind of animal in it, a giraffe maybe?

Could you be thinking of Microsoft Home's "Fine Artist" for Macintosh, as shown in this Amazon.com listing? This program was bundled with the Performa series of Macs during the mid-90s.

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

MSI P67A-G43 (B3) - Need help identifying this postcode

Need help identifying this postcode:
CPU:i7-2600k
Mobo:MSI P67A-G43 (B3)
PSU: Corsair 750w
GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

Hey Ctrl
Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

Need Help, put together information, summary to print

Hello,
I need help.
I want to make a e-learning for school children of the 5th class.
I have a lot of excersises like a fill-in-text or drag and drop and so on. Now my question is, can I put the information the children puts in together like a summary at the end of the lesson, so the children can print it like a worksheet at the end?

Happy to provide more detail, but on what, exactly?
Do you need more detail on how to create the PDF? If so, that's a bit beyond the scope of what we usually do here in the Captivate forums. There are many different ways to create a PDF.
As for linking the PDF, I already advised. But you may need more detail here. When you insert a Click Box or a Button object in Captivate, you assign an action that occurs when the user clicks the object. The assignment occurs in the properties panel on the right. The typical action is "Go to next slide", but it's a drop-down you may change. I suggested changing it to assign "Open URL or File". Once you do that, you will see a field where you may type the URL or the file name.
Cheers... Rick

Need help identifying a kernel panic

Hi all,
I've been struggling with my iMac now for six months or so. At the worst of things, I couldn't boot up in anything other than safe boot. I did end up identifying a stick of 4gb Corsair ram as the culprit, but after pulling it I am still having freezing, just less frequent.
Here is the most recent panic:
Interval Since Last Panic Report: 32225 sec
Panics Since Last Report:          1
Anonymous UUID:                    18854217-9731-4D91-81E2-A05A290D1592
Tue Jul 15 22:31:37 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c1ee, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00007fff70a17fc0, CR3: 0x0000000028c64000, CR4: 0x0000000000040660
RAX: 0xb2d900a8ffffffc8, RBX: 0xffffff800087ed20, RCX: 0xffffff800d6b0da8, RDX: 0x0000000a2388f363
RSP: 0xffffff805b07bce0, RBP: 0xffffff805b07bd10, RSI: 0xffffff8000843070, RDI: 0x0000000a2388f363
R8: 0x0000000000000001, R9: 0x0000000000000012, R10: 0x0000000000000002, R11: 0x0000000a1e2bb4fd
R12: 0x0000000a2388f363, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff800ee08cd8
RFL: 0x0000000000010007, RIP: 0xffffff800020c1ee, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805b07b980 : 0xffffff8000204d15
0xffffff805b07ba80 : 0xffffff80002d1208
0xffffff805b0
And here is my EtreCheck info for anyone taking a look:
EtreCheck version: 1.9.12 (48)
Report generated July 15, 2014 10:33:40 PM EDT
Hardware Information:
iMac (27-inch, Mid 2011) (Verified)
iMac - model: iMac12,2
1 3.1 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:3:7
Disk Information:
WDC WD1001FALS-403AA0 disk0 : (931.51 GB)
- (disk0s1) <not mounted>: 200 MB
EricV (disk0s2) / [Startup]: 931.19 GB (550.56 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Tablet PTZ-630
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information:
Apple, Inc. iMac
Kernel Extensions:
[loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.0.5) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.wacom.wacomtablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Microsoft AU Daemon
AdobeResourceSynchronizer
SuperDrive Update 2.1
System Events
SeagateRegReminder
Spotify
Dropbox
Google Drive
Internet Plug-ins:
Google Earth Web Plug-in: Version: 6.0 Support
OVSHelper: Version: 1.1 Support
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
Musicnotes: Version: 1.17.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
DivX Web Player: Version: 3.1.1.9 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
QuickTime Plugin: Version: 7.6.6
AdobePDFViewer: Version: 9.5.5 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
SOEWebInstaller: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
WacomTablet Support
Top Processes by CPU:
      25% mdworker
      1% Safari
      1% WindowServer
      0% WebProcess
      0% hidd
Top Processes by Memory:
111 MB WindowServer
98 MB WebProcess
78 MB App Store
78 MB Dropbox
78 MB Google Drive
Virtual Memory Information:
2.23 GB Free RAM
768 MB Active RAM
244 MB Inactive RAM
795 MB Wired RAM
197 MB Page-ins
0 B Page-outs

You say you can start up in safe mode. Does that mean you hold down the shift key? If so, see below.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Need help identifying model of a Treo

I rarely need a PDA, so I didn't replace the old M105 that died. A friend replaced a Treo she'd been using and gave it to me, but all I got was the device itself, the charger, and the USB cable. I'm having trouble getting it to load my contacts and calendar (for some reason it did transfer four items in a ToDo list!), and I can't even figure out what model it is, let alone can I find a user's manual. It is definitely just a PDA and not a phone.
On the back of the Treo is the following identification:
GMHED248700FX
What is it?! And what version of Palm software is required in order to get it to sync with the Palm software on my computer? I thought at first it might be a model 700FX, but I can't find that model listed anywhere on the Palm site, so clearly that isn't it. Is there any other way to identify it?
Thank you for any help!
Post relates to: None

Thank you! That certainly seems to be the one I have, and the age isn't important for what I need. Now, though, that leads to the next issue, which is that I can't sync my contacts and calendar, although I think I've figured out why for myself. Still, it generates another question.
I am currently using Palm v 4.2.1 on my desktop (Mac 10.4.11) I bet it's too new, isn't it? Is it going to be possible for me to back off to Palm 4.0 without losing the information that's currently stored in 4.2.1? I don't mind installing an older version of the software (and I found the download), but if it means losing my information, I'll just pass this free Treo on to some other unsuspecting person.

Need help identifying icons!

Hello, i downloaded a template at work for a commercial spot. I pretty much understand how the project was made and what needs to be done with it except a few icons i dont understand. Can anyone tell me what these icons mean in this precomp of text please?
Just having difficulty understanding the different icons from 1 down to 5. This is what the comp window looks like.
Whoever can help me, it would be greatly appreciated. The project is finished and the commercial runs fine, but im trying to learn from this template and make my own. I know those are maybe a few mask icons and such, but not really sure. so if anyone can explain what 1 through 5 are, that'd be great.

A solid color layer is just that, a layer with a solid color applied. It has no content except the color unless you add a plug-in to render something on the layer.
A text layer is just that, a layer of text
A track Matte is a layer that provides transparency information to the layer directly below it
A guide layer is a layer that can contain anything from footage to graphics that is used for a guide when placing other elements. Guide layers do not render.
The very top layer in your project does not appear to be doing anything It is turned off.
The text layer is also turned off.
The second revealer matte layer is set to provide alpha transparency to the layer below but it is also visible. Again, I don't know what it's doing because I can't see effects applied or other info about your comp. If you want to see what's really going on select all layers and press the U key twice. You'll also need to include the comp window in the screenshot.
The stripe layer is a blue solid with an effect applied that is taking some alpha information from the revealer matte layer.
I'm not sure what the guide layer is showing. You can find out by turning it on and off.
Layers are stacked up exactly the same way they are in Photoshop or when making a collage with a pair of scissors and a bunch of photos or colored paper. Put the background on the bottom then add your elements as required to make your composition.
This is more than basic stuff. Please follow Todd's suggestion and read the getting started materials and feel free to type those terms in AE;'s Search Help field at the top right corner of the App. You'll find lots of info. You can't effectively learn AE by just poking around in it unless you are already very familiar with compositing, layering, mattes, blend modes, and the like. AE is a program that can perform any type of composite or motion graphics you have ever seen in a movie if you have the right source material and understand how compositing works. Because it's so powerful and versatile you can't effectively just jump in and figure things out without some serious study. You'll be hopelessly lost.

Need help identifying the application responsible for an insert...

Hi,
I'm a MSSQL guy and Oracle is still a bit mysterious to me. I'm looking for some assistance tracking down the application in an environment which is responsible for particular inserts.
For example, suppose I have 10 different programs running and inserting values to a DB. I need to know which one of them inserts a "0" in a particular column.
I found a trigger which will tell me the user, unfortunately these programs use a shared credential so that doesn't help me.... here's what I've got:
CREATE OR REPLACE TRIGGER check_for_zero_insert
AFTER INSERT
ON DATA_TABLE_0001
FOR EACH ROW
DECLARE
v_username varchar2(10);
BEGIN
-- Find username of person performing the INSERT into the table
SELECT user INTO v_username
FROM dual;
-- Insert record into audit table
INSERT INTO audit_table
( samplevalue
sampletime,
username )
VALUES
( :sampletime,
:samplevalue
v_username );
END;
But again, username won't help me, I need the originating process if at all possible (either an executable name, PID, or something to identify the specific application on the other side.)

use this in your trigger
select sys_context('USERENV','OS_USER') ||'-' ||user into v_username from dual;
You might need to increase the v_username data type length.
Thanks,
GPU

Need help identifying a font

I've been asked to finalize this web site
http://www.ru308.com/
I want to make a clean version of the logo, without the
grainy background.
Can anyone help me identify the font used for the company
name?
RUSSELL INDUSTRIES, INC.
Or suggest a good resource that can help me identify the
font?
Thanks in advance
Steve
Adobe Community Expert: Authorware, Flash Mobile and Devices
http://www.magnoliamultimedia.com
You need to go to MAX -
http://adobemax2007.com/na/

My Fonts - What the Font? A great resource!
http://www.myfonts.com/WhatTheFont/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Steve Howard" <[email protected]> wrote in
message
news:f95ijg$7ra$[email protected]..
> I've been asked to finalize this web site
>
>
http://www.ru308.com/
>
> I want to make a clean version of the logo, without the
grainy background.
> Can anyone help me identify the font used for the
company name?
>
> RUSSELL INDUSTRIES, INC.
>
>
> Or suggest a good resource that can help me identify the
font?
>
> Thanks in advance
>
> Steve
>
> --
> Adobe Community Expert: Authorware, Flash Mobile and
Devices
>
http://www.magnoliamultimedia.com
>
> You need to go to MAX -
http://adobemax2007.com/na/
>

Need help identifying problem (lockup/freezing in Warcraft III & CS)

my macbook pro:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
Serial Number: W862318KVWY
Sudden Motion Sensor:
State: Enabled
It freezes and has black screens during games in which apple Q and force quit doesn't work. I would need to restart the comp. when it freezes the sound would stutter, repeating whatever the game had playing.
things I tried but the macbook pro still froze:
running the game off USB storage device(so i think HD is fine)
wiping HD and reinstalling OS, updating everything and playing it on both USB and the installation of game (not 3rd party apps)
opening the macbook pro and cleaning out the dust (didn't take anything out, just blew dust off)
resetting RAM with apple options P R
took RAM out and put it back in
ran apple hardware test (everything was okay)
running a different game (Counter-Strike on CrossOver and still froze)
Disk Warrior 4 (only minor repairs and it froze in the test game after i ran DW4)
booting system from an external and running the game from USB
things to note:
although sometimes when it freezes, the temperatures are really high - even with fan control (70-80C) but, i've reproduced the lock up with the temperatures at 60C, so i don't think its a heat problem (thermal paste and whatnot)
sometimes in safari, quicktime, itunes, or just on desktop picture i would see a single, horizontal, 1 pixel-height distorted line running across the screen, which i can take screenshots of. no idea what's causing it but it could have some relation with the freezing/lockups
some days it will run without problems for the entire day, just to see lockups the very next day. I think it could be random.
help please..

=\ no one....

Need help in getting information/training material for SAP CRM (Functional)

Hello,
I am a SD Consultant.
I want to learn SAP CRM (Functional) on my own without going to any training institute or some thing.
Therefore, can anyone help me in forwarding the link(s) or document(s) with which I can learn about SAP CRM (Functional).
I want information/training material regarding SAP CRM 7.0 (on system/software working, not the general information, for example- why CRM, where CRM, etc)
For example, about org data, org structure, possible scenarios, etc.
Thanks in advance for spending your valuable time for me.
Regards,
T. Chaitanya
<<Moderator Message: Sorry, can't do. Search!>>
Message was edited by: kishan P

Hi Chaitanya,
Since You are already a SD Consultant, We assume you are very much familliar with SAP and for you CRM will also be not a big Deal.
Customer Relationships Management (CRM) is a model for managing any Organization's interaction with current and future customers. It involves technology to organize, automate and synchronize SALES, SERVICES(postsales) AND MARKETING(presales).
First of all you need to get SAP CRM installed in your system and then you need to get command over Account and Contact Management (Business Partner). The same can be learned using WebUI or GUI. From GUI the transaction launcher is WUI then web page opens up enter your credentials and select Role - Salespro. Open the Account and Contact section and do some R&D and you can learn. But in GUI you need to go to SPRO -> IMG -> Cross Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Number Ranges & Groupings -> Define Number Ranges. Here you have defined number range then you need to assign to some group created from SPRO same way. And Finally maintain Business Partner using Tcode - BP.
Then You Learn Organizational Management which allows us to map our marketing, sales, service structure maintaining company's structure including the position and Employees in an Application and assign specific attributes to the otganizational units.
Path: SPRO -> IMG -> CRM -> Master Data -> Organizational Management -> Organizational Model -> Create Org Model/Change org model.
Just Go ahead and with some more R&D in the system and taking of F1 Help of SAP Documentation I think you can easily learn SAP CRM.
Regards,
Piyush

Need help to crypt information in database

Hi,
I need to crypt different data before inserting them in the database and, of course, to be able to retrieve and uncrypt them.
I don't know how to do it and even how to start.
I found different help about crypting passwords and testing the crypted password but nothing about crypting long or string values, strore them and uncrypt them.
please, help.

http://java.sun.com/j2se/1.4.2/docs/api/javax/crypto/package-summary.html
http://java.sun.com/j2se/1.4.2/docs/api/javax/crypto/interfaces/package-summary.html
http://java.sun.com/j2se/1.4.2/docs/api/javax/crypto/spec/package-summary.html
Read especially the dcumentation for the javax.crypto package (see the first link), it refers to yet more information.

I need help identifying and removing annoying gadget that shows all open windows and applications when I mouse over a corner.

It seemed like a good idea at the time. Some time ago I installed a gadget (doesn't seem to be an item in my Applications folder) which, when I mouse-over the lower-left corner of my screen, brings up a screen showing reduced-size versions of all open application windows and Finder windows. I've tried to identify what it is, and where it is located, so I can remove it, but to no avail.
I'd really appreciate any help getting rid of this thing. Thanks!

Hi Paul,
Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Check the System Preferences>Keyboard>Keyboard Shortcuts.

Need help identifying effect in RH8

Hello!
I recently installed RH8. I was looking at the Help (Adobe
Help Viewer 2) and found a cool effect in the Help that I would
like to use in my project, but I'm not sure what it is. It looks a
bit like a DHTML drop-down hotspot, except the hotspot is removed
when clicked.
Here's how it works: There is a hotspot phrase ("View full
size graphic") and a small graphic underneath. When the phrase is
clicked, the phrase and small graphic disappears and is replaced by
another hotspot ("View small graphic") and the large graphic. So
you can click back & forth, replacing the hotspot & graphic
displayed each time.
This effect can be found in the Adobe Help Viewer 2, under
Exploring the workspace>Workspace overview.
I'm not an expert, but when I've used the DHTML drop-down
hotspot, the hotspot remains on the window when clicked. I also
played around with the trigger/target, but I couldn't make that fit
the effect either, although maybe I'm not configuring it properly?
Hope somebody can help me.
Thanks!

Hi all
To add to what Colum said, I saw the post last night and
quickly looked at the page. Here is my own observation after
picking things apart.
Firstly, we all need to be aware that while the page is
presented using Adobe AIR, it's not part of AIR. Think of the AIR
help viewer as being similar to the browser, but specialized. I
believe in this case, it's kind of like a hybrid between the CHM
viewer and a Web Browser. Like the CHM viewer, it's a specialized
application for displaying content. But like a Web Browser, that
content simply exists as a collection of pages on a server. For
example, I can view the same page in my FireFox web browser using
the link below:
Click
here to view
After picking the page apart, I determined that some
JavaScript is being used to provide that effect. And it's quite a
neat one! The JavaScript function seems to be titled
showHideImage and is found in a linked JavaScript file
called
help.js.
So here's the kicker. I do not believe the page in question
was created using RoboHelp. If it was, maybe this is a preview of
coming attractions?
If not, I would think that at least that function
should be added to RoboHelp among its many DHTML effects.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Need help identifying controller information in hyperdraw

Similar Messages

Maybe you are looking for