NEED HELP IN SQL+ CODING USING POINTERS

GOOD MORNING BOARD,
I HAVE A CODING ISSUE DEALING WITH POINTERS AND BUILDING TABLES USING THEM CAN SOMEONE PLEASE HELP??
I CAN SEND THE CODE TO U VIA ATTACHMENT
THANK YOU IN ADVANCE
A...

Similar Messages

Need help in SQL Queries using GUI controls or variables

Hello, all
I have a big problem (I have already had with Visual Basic a few mounths ago) with Java while writing my SQL Queries.
I would like to know how I must do to use variable data or GUI control data in my SQL Query to select only some records.
Here, my first Query that works without any problem (no WHERE clause !!!) :
Statement requeteBedes = connectBedes.createStatement();
ResultSet resultatSeries = requeteBedes.executeQuery("SELECT * FROM Series");
initComboBoxSeries(resultatSeries);the method "initComboBoxSeries" fills a JComboBox with all the names of the series in my database.
Here comes my problem.I would like to use the value of the selected "series" in the JComboBox to search in another table of the same Database. I made another statement but it returns a Null ResultSet :
ResultSet resultatSearchAlbumsFromSeries = requeteBedes.executeQuery("SELECT * FROM bandes_dess WHERE ser_nom = '" + strComboBoxSeriesSelected + "' "); The variable strComboBoxSeriesSelected contains the value of the selected line in the combobox with all the series, filled after the first query that is here above and that works very well.
Could some one help me and tell me how I must use variables or GUI controls values in my SQL Queries or tell me if there is a place where I could find an explanation of that kind of problems (like more "advanced SQL Queries", as the ones currently used in all the Learning Java 2 books)
Thank you all for your help.
Christian.

executeQuery() will never return null. At least that's what the spec says. You are probably catching an exception (probably a syntax error caused by a single quote in strComboBoxSeriesSelected) and ignoring it. Or do you mean the ResultSet contains no rows?
Anyway, to use parameterized queries, take a look at PreparedStatements. Your code should look like this using PreparedStatement:Statement requeteBedes = connectBedes.prepareStatement("SELECT * FROM bandes_dess WHERE ser_nom = ?");
requeteBedes.setString(1, strComboBoxSeriesSelected);
ResultSet resultatSeries = requeteBedes.executeQuery();Alin.

NEED HELP IN SQL CODING

I AM HAVING SERIOUS PROBLEMS DROPPING TABLES IN MY SQL CODE... PLEASE HELP
...A

here is a copy of the code... i can also send it as an attachment via email... thank you in advance...
set pause on
spool output-file
echo on
rem Asfa Taitt
rem Project2
drop table T_ENROLL;
drop table T_SECTION;
drop table T_STUDENT;
drop table T_INSTRUCTOR;
drop table T_COURSES;
drop table T_SCHOOL;
drop table T_MAJOR;
create table T_SCHOOL (School char(4) not null,
primary key (School));
create table T_MAJOR (Major char(4) not null,
School char(4),
primary key (Major),
foriegn key (School) references T_SCHOOL);
create table T_STUDENT (Student_No integer not null,
Student_Name Char(20),
Major char(4),
primary key (Student_No),
foriegn key (Major) references T_MAJOR);
create table T_INSTRUCTOR (Instructor_No integer not null,
Instructor_Name Char(20),
School char(4),
primary key (Instructor_No),
foriegn key (School) references T_SCHOOL);
create table T_COURSES (Course Char(7) not null,
MAX_Allowed Integer,
Credit_Hours Integer,
GOA Char(1),
primary key (Course));
create table T_SECTION (semester Char(7),
School char(4),
Course Char(7),
Sec_No Char(4) not null,
Sec_Loc char(5),
Section_Time char(13),
Instructor_No integer,
primary key (Sec_No),
foreign key (Instructor_No) references T_INSTRUCTOR,
foreign key (Course) references T_COURSES,
foreign key (School) references T_SCHOOL);
create table T_ENROLL (
Semester Char(7),
Course Char(7),
Sec_No Char(4),
Student_No integer,
GOS Char(1),
Major char(4),
foreign key (Student_No) references T_STUDENT,
foreign key (Course) references T_COURSES,
foreign key (Sec_No) references T_SECTION,
foriegn key (Major) references T_MAJOR);
insert into T_COURSES values ('IFSM410',30,3,'R');
insert into T_COURSES VALUES ('CMIS300',30,3,'R');
insert into T_INSTRUCTOR values (111223333,'BABISKIN ROBERT G');
insert into T_INSTRUCTOR values (222997777,'CODD TED E');
insert into T_SECTION values ('SPR01','BUS','IFSM410','4031','RM32','TUTH3:30-5:00',111223333);
insert into T_SECTION values ('SPR01','ENG','CMIS300','4011','RM407','MWF 1:30-2:30',222997777);
insert into T_STUDENT values (222445555,'HARRIS JOHN H');
insert into T_STUDENT values (215557777,'LITTLE BOB K');
insert into T_STUDENT values (517443333,'JONES JANE G');
insert into T_ENROLL values ('SPR01','IFSM410','4031',222445555,'R','IFSM');
insert into T_ENROLL values ('SPR01','CMIS300','4011',215557777,'R','CMIS');
insert into T_ENROLL values ('SPR01','CMIS300','4011',222445555,'R','IFSM');
insert into T_ENROLL values ('SPR01','CMIS300','4011',517443333,'R','CMIS');
insert into T_ENROLL values ('SPR01','IFSM410','4031',517443333,'R','CMIS');
DELETE from T_ENROLL
WHERE T_ENROLL.Student_No = 222445555 and T_ENROLL.Course = 'IFSM410';
commit;
select * from T_INSTRUCTOR;
select * from T_COURSES;
spool ofF

Need help with ABAP coding using java

Dear experts,
I have used ABAP to code many reports/function modules.However as i know java quite well,i want to achieve the same using java.I have utilized JCO to retrieve information from RFC in this mission.
However i realized that i had to code all things using ABAP and use java only as interface to connect to
SAP fetch that module and display information on console.It was not that fun.
I want that i should not Login to SAP but work only using java.
I heard SAP Netweaver is a good choice.But i dont know much about it.Will i be able to develop reports only by java and how ?
Plz suggest.

hi,
I hope that you already have the J2ME Toolkit and that your emulator works okay. In the toolkit you get several examples to show you how to program a MIDlet. One has to do with a HTTP client server connection. Also in the API documentation for the J2ME there is a Connector class that you used to set up this communication and in the description of this class it pretty thoroughly explains how to set up an HTTP protocol client.
However, if you want to do some other kind of networking then you are pretty much out of luck, as the TCPIP socket protocol has not been fully implemented and is optional to the J2ME specifications, only the HTTP protocol is certain to be available. This means that mobile phone companies can add other networking functionality to their phone's java virtual machine if they feel like it. This is a bummer I know.
I hope this helps.
Cheers,
Mark

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Need help with SQL Query with Inline View + Group by

Hello Gurus,
I would really appreciate your time and effort regarding this query. I have the following data set.
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*20.00*-------------19
1234567----------11223--------------7/5/2008-----------Adjustment for bad quality---------44345563------------------A-----------------10.00------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765--------------------I---------------------30.00-------------19
Please Ignore '----', added it for clarity
I am trying to write a query to aggregate paid_amount based on Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number and display description with Invoice_type 'I' when there are multiple records with the same Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number. When there are no multiple records I want to display the respective Description.
The query should return the following data set
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*10.00*------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765-------------------I---------------------30.00--------------19
The following is my query. I am kind of lost.
select B.Description, A.sequence_id,A.check_date, A.check_number, A.invoice_number, A.amount, A.vendor_number
from (
select sequence_id,check_date, check_number, invoice_number, sum(paid_amount) amount, vendor_number
from INVOICE
group by sequence_id,check_date, check_number, invoice_number, vendor_number
) A, INVOICE B
where A.sequence_id = B.sequence_id
Thanks,
Nick

It looks like it is a duplicate thread - correct me if i'm wrong in this case ->
Need help with SQL Query with Inline View + Group by
Regards.
Satyaki De.

I need help from chile and use a language translator to write and not turn my iphone4

I need help from chile and use a language translator to write and not turn my iphone4

http://support.apple.com/kb/TS3281
Not turn on

Need help transfer sql o/p as email using Shell scirpt

Hi all
I tring to Email the sql report using the shell script
I am using this command in the shell script
Then how to initialize the org_id ?
I written fnd_client_info.set_org_contex(fnd_profile.value('org_id'); in the sql script. is this the write way to write
Can any one help on this..
Edited by: Sravprem on Sep 20, 2012 1:46 AM

Hi Helios
Our Erp vesion was 11i & i tried like below in sql script (to initialize the org_id). program was error outed .. Can you tell how to use view in sql script
set lines 32767
set feedback off
set emb on pages 0 newp 0
set trimspool on
set tab off
set trimout on
set echo off
set underline off
set verify off
set show off
set head off
set colsep,
COLUMN ERR_REC_CNT format a500 HEADING 'ERROR_RECORD_COUNT'
COLUMN PRCS_STTS_FLG format a10 HEADING 'PROCESS_FLAG'
COLUMN CREATION_DATE format a35 HEADING 'CREATION_DATE'
BEGIN
FND_CLIENT_INFO.SET_ORG_CONTEXT(FND_PROFILE.VALUE('ORG_ID'));
END;
SELECT 'ERROR_RECORD,PROCESS_STATUS_FLAG,CREATION_DATE'
FROM DUAL
UNION ALL
SELECT order_number ||',' ||
customer_number ||',' ||
line_number
FROM oe_order_lines_v;
EXIT;
/

Need help in SQL (DENSE_RANK) function

Hello All,
I need the help in SQL.
We have a table called status and the column are
status_id number
account_id number
status_cd varchar2(10)
created_id varchar2(10)
created_by date
and data is as follows
insert into status values (1,101,'ENTER','ABC',to_date('21-JAN-2007 11:15:14','DD-MON-YYYY HH:MI:SS'));
insert into status values (2,101,'REVIEW','DEF',to_date('21-JAN-2007 11:30:25','DD-MON-YYYY HH:MI:SS'));
insert into status values (3,101,'APPROVE','GHI',to_date('21-JAN-2007 11:30:25','DD-MON-YYYY HH:MI:SS'));
insert into status values (4,102,'ENTER','ABC',to_date('21-JAN-2007 11:18:14','DD-MON-YYYY HH:MI:SS'));
insert into status values (5,102,'REVIEW','DEF',to_date('21-JAN-2007 11:33:25','DD-MON-YYYY HH:MI:SS'));
insert into status values (6,102,'CANCEL','GHI',to_date('21-JAN-2007 11:33:25','DD-MON-YYYY HH:MI:SS'));
insert into status values (7,103,'ENTER','ABC',to_date('21-JAN-2007 11:21:14','DD-MON-YYYY HH:MI:SS'));We have different status as follows
1. ENTER
2. REVIEW
3. APPROVE
4. CANCEL
5. REJECT
My requirement ..
I need the max of created_id column for the status in ('APPROVE','CANCEL') and if there is no status in ('APPROVE','REVIEW') than it should be NULL.
I wrote an SQL as
select account_id,max(created_id) keep (dense_rank first order by decode(status_cd,'APPROVE',created_dt,'REVIEW',created_dt,NULL) DESC NULLS LAST,
      decode(status_cd,'APPROVE',status_id,'REVIEW',status_id,NULL) DESC NULLS LAST) last_app_rev_user
from status
group by account_id and gives me the output like
ACCOUNT_ID LAST_APP_R
       101 GHI
       102 DEF
       103 ABCBut I want the Output like
ACCOUNT_ID LAST_APP_R
       101 GHI
       102 DEF
       103 NULLAs the account 103 has no status called 'REVIEW' and 'APPROVE'
My DB Version in 10.2.0.3.0.
Hope I explain it properly. And if you have any other option without dense_rank still i will be happy.
Thanks in advance for your help.
AB
null
Message was edited by:
AB

instead of max(created_id) keep... use
smth like max(case when status_cd in ('APPROVE','REVIEW') then created_id end) keep...

Need Help On SQL Statement

I am using Sybase as my back end database. I need help on my SQL statement regarding datetime. The datetime is store as a 9 digit integer in the database (...I believe it is a Decimal(30,6) format, let me know if I am wrong).
If I do this, "select * from mytable;" It works out fine (except I don't know what the date means e.g. 998919534)
If I do this, "select * from mytable where datetime_col < '9/5/2002' ; I got an error. I even tried '9/5/02 11:00 000 am' but it didn't help.
How do I specify a date or datetime in my query?
Thanks in advance.

I execute the sql statement
select * from mytable where datetim_col < convert(datetime, '3/4/2002', 101) ;
I got mix result. I got an error message "cannot convert 10375584 to a date.
Yet, he statistics window of the I-sql says
"estimated 493 rows in query (I/O estimate 87)
PLan> mytable (seq)"
It looks like I my the SQL statement is correct and then the system can't display it in the Data window.
Any thought ?

Need help on SQL Statement for UDF

Hi,
as I am not so familiar with SQL statements on currently selected values, I urgently need help.
The scenario looks as follows:
I have defined two UDFs named Subgroup1 and Subgroup2 which represent the subgroups dependent on my article groups. So for example: When the user selects article group "pianos", he only sees the specific subgroups like "new pianos" and "used pianos" in field "Subgroup1". After he has selected one of these specific values, he sees only the specific sub-subgroups in field "Subgroup2", like "used grand pianos".
I have defined UDTs for both UDFs. The UDT for field "Subgroup1" has a UDF called "ArticleGroup" which represents the relation to the article group codes. The UDT for field "Subgroup2" has a UDF called "Subgroup1" which represents the relation to the subgroups one level higher.
The SQL statement for the formatted search in field "Subgroup1" looks as follows:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP1] T0 WHERE T0.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod])
It works fine.
However, I cannot find the right statement for the formatted search in field "Subgroup2".
Unfortunately this does NOT WORK:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT $[OITM.U_Subgroup1])
I tried a lot of others that didn't work either.
Then I tried the following one:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT T1.[Code] FROM [dbo].[@B_SUBGROUP1] T1 WHERE T1.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod]))
Unfortunately that only works as long as there is only one specific subgroup1 for the selected article group.
I would be sooooo happy if there is anyone who can tell me the correct statement for my second UDF!
Thanks so much in advance!!!!
Edited by: Corinna Hochheim on Jan 18, 2010 10:16 PM
Please ignore the "http://" in the above statements - it is certainly not part of my SQL.
Please also ignore the strikes.

Hello Dear,
Use the below queries to get the values:
Item Sub Group on the basis of Item Group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[U_GroupCod] =$[OITM.ItmsGrpCod]
Item Sub Group 1 on the basis of item sub group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[U_SubGrpCod]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp])
Sub group 2 on the basis of sub group 1
SELECT T0.[Name] FROM [dbo].[@SUBGROUP2] T0 WHERE T0.[U_SubGrpCod1]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp1])
this will help you.
regards,
Neetu

Need help about ref cursor using like table

Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advance

My understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks

Need help in writing coding in HTML?

HI All
I have requirement like this.
1st RFC i pass Plant and i will get trasportation point.
in display template i need to display trasportation point in dropdown box and user will select the trasportation point and iam passing this trasportation to aother RFC and gettting shipment cost.
i need help in how to write coding in .IRPT
i created the transactions for both the RFC and its working fine.First RFC iam getting trasportaion point ...i created Xecute query.
I need how to display !st one in dropdown box and pass that data into 2nd RFC.
Regards,
Phani

Phani,
You have to use the iBrowser displaytemplate.
Map the transportion point Xacute qquery in iBrowser displaytemplate.
In code use :
document.APP1.getBrowserObject().getSelectedItem();
Store the value of above code in a variable.
And pass this variable in other appalet which displays the R/3 details as below:
document.APP2.getQueryObject().setParam(1,var);
document.APP2.refresh();
-Suresh

Need help in english to use my iphone4 with orange.fr in france

I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?

Hello
The whole story is a little bit confusing for me. So lets see what you wrote:
>... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
> So now I have a computer I can't use
Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
> I have also bought the product recovery disks from toshiba's backup media site
But why if you already have recovery disc that you have used at the beginning of the whole story?
What you need to do is to use this original disc for OS installation.
-start your notebook and press F12 several times to enter BOOT menu
-when the menu is shown put recovery disc into ODD
-select CD/DVD drive in the menu and press ENTER
-follow the menu on the screen
After recovery image installation you will have factory settings again and everything should be OK.
More questions?

NEED HELP IN SQL+ CODING USING POINTERS

Similar Messages

Maybe you are looking for