Need help: message split and send in BPM
i have this mapping where the idoc has to be split first before passing it to a BPM. the mapping should perform like this
from
IDOC
segA
segB1
segB2
segB3
/segA
/IDOC
to
IDOC
segA
segB1
/IDOC
IDOC
segA
segB2
/IDOC
IDOC
segA
segB3
/IDOC
I was successful in doing the 1st step of mapping requirement for the above transformation. The next step was to map per occurence of IDOC to another target message and send it (ex. above is 3 occurence of IDOC, so there should be 3 mapping and sending that should happen. My problem now is how to design the BPM for this. Any suggestions?
Message was edited by:
Brian Lo
create one MT such as
root
|__IDoc
|__segment
duplicate the subnode in the target message mapping (right click on the node and select dupliate subtree) and ten do the mapping...here u can go 4 this approach only if the number of number source segments (ie. sega, segb1, segb2, segb3) are constant....have read in coupe of threads that split mapping is not possible for idocs.....u may also need to check on it
Similar Messages
-
1:n Message split and Abap Proxies??
Hello,
Can I not use Message split and Abap Proxy together? My scenario is MDM->File ->XI->Proxy->BI.
I am getting a single file syndicated from MDM and in XI If I use message mapping to do 1:n split in the message mapping, can I use it with Abap Proxies? As per the link below, XI adapter is not present in the list..We are on PI 7.0 SP14. Thank you..
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thank you for any suggestion..Hi Thanujja,
If you see the message from Raj, I dont think we can split the messages for the proxy. This is beacause the splitting of messages take place at the Adapter Level only for the adapters on the Java stack.
As suggested by Guru, you can try splitting the messages in the inbound proxy instead of using a BPM, in that way you can acheive good performance.
Thanks,
Srini
Edited by: srinivas kapu on Mar 27, 2008 9:09 AM
Edited by: srinivas kapu on Mar 27, 2008 9:10 AM -
Hi, My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress iss: http://lisbondreamwalk.li.funpic.org This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */ send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void { if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URL var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress); thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = ""; } }
HThank you Kglad, I am going to see if I can make it work. I will let you know!
Date: Thu, 13 Oct 2011 08:55:05 -0600
From: [email protected]
To: [email protected]
Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
created by kglad in Action Script 3 - View the full discussion
you missed part of the tutorial (or the tutorial is incomplete): send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{ if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
}} var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Action Script 3 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?
Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exceptionDo you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/ -
I need help why does i send to this friend there is a redbox + x
i need help why does i send to this friend there is a redbox + x , but i send to other friend there is no problem. for anorid samung s3 phone
Are you sure you have the right pin for your other friend? Try deleting the contact and re-adding them. Also, BBM has to be approved in the countries of both parties.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
This is a second try to get help. I need help to uninstall and reinstall Photoshop cc 2014
Bridge is not working well, I need to reinstall Photoshop cc 2014 . Someone from Communities was suppose to help me.
Hi John,
I used the chat "Creative chat support" this afternoon at around 14:40
and the person, Karthik M , gave me a link to Technical Support. I
guess he could not help me, but he said he understood the issue. With
the link "Help, Adobe Installation problems", I will follow the
instructions to clean ps cc2014 with CCleaner and reinstall the app.
It looks quite complicated but I will give it a try and hopefully succeed.
You have to understand when reading my previous messages, the issue is
no longer "Retreiving Photoshop CC" but reinstalling Phoshop 2014 to try
to repair Bridge.
Thanks for caring,
Suzanne Lanthier
Le 2014-08-13 15:50, John T Smith a écrit :
>
This is a second try to get help. I need help to uninstall and
reinstall Photoshop cc 2014
created by John T Smith <https://forums.adobe.com/people/JohnTSmith>
in /Adobe Creative Cloud/ - View the full discussion
<https://forums.adobe.com/message/6637788#6637788> -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
Need Help in Splitting a String Using SQL QUERY
Hi,
I need help in splitting a string using a SQL Query:
String IS:
AFTER PAINT.ACOUSTICAL.1..9'' MEMBRAIN'I would like to seperate this string into multiple lines using the delimeter .(dot)
Sample Output should look like:
SNO STRING
1 AFTER PAINT
2 ACOUSTICAL
3 1
4
5 9" MEMBRAIN
{code}
FYI i am using Oracle 9.2There's this as well:
with x as ( --generating sample data:
select 'AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN' str from dual union all
select 'BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN' str from dual)
select str,
row_number() over (partition by str order by rownum) s_no,
cast(dbms_xmlgen.convert(t.column_value.extract('//text()').getstringval(),1) as varchar2(100)) res
from x,
table(xmlsequence(xmltype('<x><x>' || replace(str,'.','</x><x>') || '</x></x>').extract('//x/*'))) t;
STR S_NO RES
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 1 AFTER PAINT
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 2 ACOUSTICAL
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 3 1
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 4
AFTER PAINT.ACOUSTICAL.1..9" MEMBRAIN 5 9" MEMBRAIN
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 1 BEFORE PAINT
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 2 ELECTRIC
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 3 2
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 4
BEFORE PAINT.ELECTRIC.2..45 caliber MEMBRAIN 5 45 caliber MEMBRAIN
{code} -
I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165
Please do not share serial numbers or Order numbers on Forums . Serial numbers and order numbers are very confidential.
You can only share serial number with Adobe Customer support staff. -
I need help in downloading and installing a previously purchased version of Photoshop Elements 12: <Serial number removed by moderator>
Hi There,
Kindly try: Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Thanks,
Atul Saini -
Need Help in installations and connecting displays. Please!
Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you. -
I need help from chile and use a language translator to write and not turn my iphone4
I need help from chile and use a language translator to write and not turn my iphone4
http://support.apple.com/kb/TS3281
Not turn on -
Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!
That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer. -
I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?
We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.
-
I need help locating where and how to update Mac OS-X to Mountain Lion.....Thanx....Jay
First update your 10.6 version to 10.6.8 from the software update under the Apple Menu.
This will add direct access to the Mac App store via a new application.
Now launch the App Store from your Applications folder - Its the new icon a letter A formed from a ruler pencil and pen on a blue circle !
Once launched you need to add your iTunes account details or create an account add payment details etc...
Sign in purchase download and follow install processes to upgrade to 10.8 Mountain Lion.
OH and to be safe BEFORE you install backup your current system to an external drive !
Maybe you are looking for
-
ISight is not working after upgrade to Mountain Lion.
Please help! After upgrade to Mountain Lion, Skype, Photobooth and etc can't detect iSight.
-
Flag appears in tool bar...
Alright, I know how to get rid of the flag, and I know what it is related to. However, I have no idea what would have caused it to (seemingly) randomly appear... What are the possible actions to get the flag to appear in the toolbar (other than going
-
Hi, I just installed Arch (wauw it boots fast ) and everything is working (even my wireless with Ndiswrapper) except my Xorg. I dit: pacman -S xorg xorgconfig pacman -S hwd hwd -x mv xorg.conf.hwd xorg.conf (in /etc/X11) and when I try Xorg-configure
-
Extract-Export iCloud Contacts Locally
Greetz Commnunity! I'd like your help with something if anybody knows.. I'm in need to extract or export my iCloud contacts to my local Address Book. I happen not to backup the Address book when i bought a new macbook pro 6.2, so now.. i have'em on m
-
OK, do we all agree that the green button in the upper-left corner is completely worthless? I think it's meant to me a "minimize / maximize window" button, but it does jack. So, after all the brouhaha about Apple and its advances, can anyone tell me