Need help on Audigy 2, mic port is not work

Well, here it goes. I just recently formated and reinstalled windows. I did the dri'ves for my card, got all the sound out puts working. When I go to use my mic, I can not get it to even work. I changed my mic's out and still got nothing. I looked at all the input opitions, messed with mute and unmute still nothing.
I would gladly be greatful if someone could help to releave this problem of mine.
Thanks!

Those drivers are fine for your card.
Onboard sound is a separate sound 'card' which is integrated into motherboard ... it normally becomes disabled automatically when another audio device is present but not all systems does this w/o changing some BIOS settings regarding Onboard Audio.
You can disable the onboard sound through "Device manager" by just selecting "disable"? on device properties for onboard sound.
Did you run the mmsys.cpl and checked if those play and recording devices are correcttly set ... also, as you maybe don't? have Creative Surround Mixer available, then did you enable the Mic port (start run... sndvol32.exe (sndvol32.exe /R for recording options)?
Are you sure you have connected the microphone correctly (check on the user's guide (you'll find one from downloads if you have lost your CD))?
jutapa
Message Edited by jutapa on 07-3-2008 0:09 AM

Similar Messages

  • Need help with sound on media and itunes. not working

    The media player and itunes sound does not work. need help

    You either need to kill all sounds when they click the
    Next/Back buttons OR you could disable the buttons until the sound
    completes.
    Hope that helps!

  • Need help with XiFi Platinum... Not worki

    Hello everyone, I'm having (some?) trouble with my XiFi Platinum. I've had it for a little over a year now, and I personally think it's broken but I just want to be sure before I go out and buy something to replace it...
    So yesterday it worked fine justl like new. Then I installed a new 8800GT (From 2 7900GT's being removed) and connected that. I had to rewire some things, move a harddri've around to make it fit, etc, but i didnt really mess with the soundcard, there was no need to. But when I turned the computer on after installing I find that there is no sound at all. Windows didint even detect the card anymore and simply said ''no audio device'' in the sound properties.
    I then proceeded to re adjust the card in the same PCI slot and after reboot windows did recognize the card properly. I continued to test if it worked, because all the software settings said it should be working. I turned on my speakers and without even having any audio files running i had this high pitched ringing noise that never went away (until i turned off the speakers).
    OK so I thought it might have been the PCI slot, so I doubtfully tried another slot. The card isn't recognized at all in the second slot, and I go back where I started to ''no audio device detected." I deleted the Creative drivers and downloaded the most recent XP32 ones that I'd need (SBXF_PCDRV_LB_2_5_0006.exe), but at the start of the installation it simply said something like ''there is no supported device detected, installation will now close.'' So at this point I'm not sure what I need to do because I think it's broken...
    System Specs:
    Motherboard: MSI P6N SLI Platinum? LGA 775
    Processor: Intel Core 2 Duo E6550 @ 2.4GHz
    RAM: (2xGB) Patriot signature DDR2 800
    Hard Dri'ves: (2x) Western Digial Caviar 200GB (=400GB)
    Graphics Card: eVGA Geforce 8800GT 52MB
    Sound Card: CL SB Xi-Fi Platinum (http://us.creative.com/products/product.asp?category=&subcategory=208&product=4065 )
    OS: Windows XP Home 32bit
    Also, this is a ''relati'vely'' fresh install of win XP that I did about 2-3 weeks ago. Reinstalled nVida drivers last night after installing the 8800GT. At this point I'm thinking that i might have burnt out the card at some point while working with the computer, and I can't see otherwise, but I dont know..
    Any help is appreciated.:manvery-happy:
    **EDIT** I forgot to mention that after I switched the card to a new PCI slot it was detected by Windows as a new PCI device, but it didnt work and I couldnt install drivers. Strangely I think the bios got reset or something because after I moved the card the MSI logo was displayed as opposed to the boot information, which I had it set on. The clock also got reset.. I'll have to look more closely at the bios to see if anything else got changed too.
    Message Edited by sniper23 on 07-22-2008 02:06 PM

    Quote from: Svet on 13-October-09, 20:13:27
    Try with better PSU, single rail with at least 40A at +12V
    Any recommendations for a better PSU, I've also been looking at the stats for my current psu
    quote some specs on it..
    "Triple 12V Rails provide independent reliable power to the CPU, video card and other components with a combined rating of 50A (40A on 520W) maximum! Advanced circuitry design that automatically enables power sharing between the triple +12V rails in an event of overload on any single +12V rail."
    Really thought this PSU would handle it.

  • Need Help! Wierd loading percentage issue does not work in IE  but in other browsers it is ok, why?

    Hi!
    I have created a little test swf for my client and I have
    encountered a wierd problem because the loading percentage text
    field does not seem to function in IE 6 but the same file works
    fine when viewed in Firefox and Netscape. When I test the movie
    using simulate download in Flash it works well too. Is this a bug
    and how can be fixed?
    Please take a look online:
    http://www.attila.reinhardt.com/clients/accentcom/clientprofiles_cheyney.html
    I have also posted the related actionscript code below.
    Thank you for any help in advance,
    Attila

    << I Tried to post it through this link -
    http://input.mozilla.com/en-US/feedback#sad
    There was no visual clue that it took the feedback - just sat on the screen with my information in the text box. >>
    The same thing happens with me.

  • Sorry... Newbie need help... Win XP Javac not working

    Hello....I am pretty new at Java programming, and from wut I have heard...I can run Java applications out of Dos... I learn the codes are Javac and appletviewer. but it doesnt seem to work with win XP professional.... it said that the codes are not internal or external command or something like that....can someone please show me the right way...thanks

    I'm assuming you put the path in the Environmental Variables on the Advanced tab in the System settings. You need to put in the path to java bin folder. Make sure you put the right path in - for example on my XP the path I added is c:\j2sdk1.4.0\bin
    You can do a search for a file named javac.exe if you aren't sure where it is installed. Also, reboot after setting.

  • I need help with my serial number - it's not working. The wizard is asking for 24 numbers - I only have 18?

    The serial number is on the back of the box my DVD came in.

    If you only have 18 numbers that's not a serial number. Try this first:
    Find your serial number quickly

  • Need HELP with Error -69.  Conventional method NOT working.

    Hello,
    I have had problems on and off with the iTunes-iPod syncing, encountering the -69 error message at points. I have read the Apple documentation on this error message. Removing the suddenly-offending music file from iTunes was easy enough in most cases, but now I am unable to sync the iPod at all. It seems that every file I have is suddenly causing this error message. Even new files I just downloaded and added to iTunes are giving me this message. It seems my iPod is unusable at this point. Is there anything else that I can do, or should I just get a new iPod?
    Frustrated,
    Julie

    Well, things just kept getting worse until even just connecting my ipod to the computer resulted in a complete crash of the whole machine.
    In case anyone has a similar problem, uninstalling iTunes 9 and reinstalling an older version fixed the problem. I can now use my ipod again.

  • My Macbook Pro USB port is not working please help

    Please help..
    My usb port has been working perfectly until one day it just stopped working, does anyone know how to help me?

    Bring it to an Apple store or AASP.

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Need help in formatting the Date - Date does not

    Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
    select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
    --- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
    (r.formdate, 'DD-MON-YYYY'),12) "formdate2"
    from  table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
    Edited by: Lucy Discover on Jul 7, 2011 1:05 PM

    Your syntax is wrong - look at the post above where this syntax is given:
    to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
    take formdate, add 12 months
    add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
    to_char(date, 'MM/DD/YYYY')Compare to your syntax:
    to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
    Good luck!

  • After installation, the mobo LAN port is not working? urgent, help ple

    I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
    Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
    Have you seen anything like this, what possibly is the reason?
    Thanks, any help will be appreciated.

    heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
    It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
    But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
    Now I am really curious.
    Last edited by mark.altern (2010-04-18 09:52:09)

  • TS4268 I need help getting my face time and imessage to work.

    I need help getting my face time and imessage to work. It is saying wating for activation. I just got my iphone 5 2 days ago. I have reset it from the phone and from itunes on the computer, made sure I'm attached to wifi.

    The 3 basic troubleshooting steps are these in order: 1. Restart your iphone  2.  Reset your settings/iphone  3.  Restore your iphone.  Since your iphone is only a couple of days old, you should backup your device before restoring.  If you don't have anything on your iphone that you care to lose, then simply restoring without a backup is fine.  A quick reset of pressing the sleep/wake button (top of iphone) and your home button simultaneously and holding it until the silver Apple logo appears. 

  • I need help getting my OS X Mavricks download to work and start downloading but it wont work

    i need help getting my OS X Mavricks download to work and start downloading but it wont work

    Contact http://www.apple.com/support/mac/app-store/contact/. They're responsible for getting this abysmal delivery system to work.

  • I need help getting my os x mountain lion to work for my pro tools

    I need help getting my os x mountain lion to work for my pro tools

    Since you provide no details I can do nothing but guess, so perhaps this will help:
    http://avid.force.com/pkb/articles/en_US/how_to/Upgrading-to-Mac-OS-10-8?popup=t rue&NewLang=en&DocType=1080
    http://avid.force.com/pkb/articles/en_US/compatibility/Avid-Software-and-Mac-OS- X-10-8?popup=true&NewLang=en&DocType=1083
    If you continue to have problems, you probably should contact Avid support.
    Regards.

  • 1 of my USB ports is not working. Help?

    Suddenly one of my USB ports is not working. No matter what I plug into it, it doesn't work.  Any help or ideas would be appreciated.  Thanks.

    Not in the one that's ailing, but it does in the other one.  I've also plugged in an external USB hard drive and that doesn't connect.  Also a mouse's USB dongle and that doesn't work in the ailing one, but is fine in the other one.
    I've also tried ( a couple of times ) to simple reboot hoping that would jog it, but that doesn't seem to help either.

Maybe you are looking for