Need help on how a user can control a video clip using their mouse

I need help. I've got a video clip of a rotating 3D
object(left to right) and i would like the user to be able to
control the rotation of the object using their mouse. I've looked
everywhere and i'm at a lost. Can anyone help me
Here is a link to what i'm trying to achieve:
http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
I know they use Java but i'm sure this can be done in Flash.
Thanks
Ray

Just use the plain linear fit!
(If you are discussing something you found in the forum, you should always include a link so we can see what you area talking about. What you probably found was a workaround that forces an intercept of zero for a special scenario. If you want to use general linear fit anyway, your matrix simply also needs a constant term)
If you still have problems, show us your code and some data.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Need help on how to a user can control a video clip using their mouse

I need help. I've got a video clip of a rotating 3D
object(left to right) and i would like the user to be able to
control the rotation of the object using their mouse. I've looked
everywhere and i'm at a lost. Can anyone help me
Here is a link to what i'm trying to achieve:
http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
I know they use Java but i'm sure this can be done in Flash.
Thanks
Ray

Here are the instructions...
Update firmware with DOS CD
To boot from CD you have to hold down the option key (<alt>) during startup. A HDD icon and a CD should appear on the gray screen. The HDD has the volume name written below and the CD is named Windows. Select the CD and boot to DOS.
Hit <ESC> to skip the README.TXT
Use PG UP/DOWN keys on an external keyboard to scroll through the readme, using arrow keys may lock DOS.
SeaFlash offers some options you should explore before performing the update. If you just want to do it ASAP then hit <D>.
Hit <L> to list compatible drives and FW version. (Column New FW version should state SD24, hit <ESC> to go back to main menu.)
Hit to scan your drive(s). (Shows your model and FW, <ESC> for main menu)
Finally hit <D> to update your Momentus XT to SD24. (takes about 15s to update)
Power off your Mac.
-- Although it did made sense to what you are saying to just follow Seagate's instructions. But they only had instructions outside the realm of MS Windows is to burn it on a disk and run a cold boot to the disk drive. Otherwise if Seagate did provide detail instruction on how to install this then can you provide me a link?
Thanks again....

Need help in how to print new line character in unix using java

Hi All,
I use the printstream class to print some line in a text using java.
here is the code:
   FileOutputStream out; // declare a file output object
        PrintStream p; // declare a print stream object
                p.print("\t");
                p.print(date);
                p.print("\t\t");
                p.print(RecCount);
                p.println("\n");when i use this and output of this character in windows is
date RecCount
22-07-2007 23456
when i use the same code in unix it shows the following output:
date RecCount[]22-07-2007
it wont accept the new line character could any one give me an idea to solve this problem.

PrintStream has a println() method. Use that. Or System.getProperty("line.separator").
Because a newline char doesn't necessarily specify a line break. It's system-dependent.

Can't import video clips using Transfer Utility LE

I'm experimenting with my new VIXIA HF R50 camcorder. Having trouble getting the scenes onto my computer. Is it necessary to use Transfer Utility LE with this camcorder, or can I import them using my video editing software - Studio 16 Ultimate? I tried the latter, and it hasn't worked yet, but then nothing is working.

Hello Magnolia!
When saving movies on a computer, you can use Transfer Utility LE for AVCHD movies and ImageBrowser EX for MP4 movies.
Saving AVCHD Movies
With Transfer Utility LE, you can save to your computer the scenes you have recorded. Download the software and install it before you connect the camcorder to the computer for the first time.
1. Power the camcorder using the compact power adapter.
2. Camcorder: Press < > to set the camcorder to Playback mode.
3. Camcorder: Open the desired index screen for AVCHD movies.
4. Connect the camcorder to the computer using the supplied USB cable.
NOTE : Camcorder: When the [Select the memory for connection] message appears, touch [All (for PC only)].
5. Computer: Double-click the icon shown below to open the software Transfer Utility LE.
6. Use Transfer Utility LE to save your AVCHD movies.
Saving MP4 Movies and Photos
When saving MP4 movies to a computer for the first time, it is necessary to install theImageBrowser EX software..
1. Power the camcorder using the compact power adapter.
2. Camcorder: Press < > to set the camcorder to Playback mode.
3. Camcorder: Open the [Movie Playback] index screen for MP4 movies or [Photo Playback] index screen.
4. Connect the camcorder to the computer using the supplied USB cable.
5. Computer: Start CameraWindow.
6. Computer: Save the desired MP4 movies or photos to the computer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How ALBPMEngine logs can be read other than using log viewer

Dear Friends,
Can anybody help on How ALBPMEngine logs can be read other than using log viewer?
Look forward for rsponse.
cheers

Max Meilleur wrote:
Mark,
I would be interested in knowing how you can decouple the obpmlogviewer.exe app from the OBPM Enterprise installation.
How can I send a simple .zip file to others and tell them: "hey, unzip (or install) this only and you will be able to read OBPM engine logs files on your local machine" ?
The logViewer executable can't be run without an enterprise install (at least not easily decoupled), however, an alternative, would be to pass someone the .jnlp and some log files.... To do this, open up the process admin, and in the top right, is a link for 'Launch Log Viewer'. Open that, and then go to 'File - Save As', and this will save a java executable to your computer.
I'm pretty sure you can pass that, and either an admin user and password to view 'live' logs, or just have them cancel the remote log, and open a local file....
Adam,
PS: I don't see any opbmlogreader.exe or .sh or .bet in the OBPM_HOME\bin directory. I am looking at OBPM standalone, and the only relevant files I can see are obpmlogviewer.exe , obpmlogviewer.lax , lax.jar. Am I missing something?
MaxI too don't have the log reader, however I do remember it... I'm thinking the .sh might only be included in the linux distribution of enterprise, so I'm downloading that now to verify... I will let you know what I find...
HTH,
-Kevin

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

How to set up the time a user can control a remote panel

Hi Everybody.
I'm doing an application using remote panels, however, I can't find information about how can I limit the time a user can control the remote panel.
I've seen in the Property Node in Remote Panels:Connection To Clients the value "Control end time" which I supose it contains the time when the control is returned to the server but I have no idea how to modify this.
Best Regards.

Hi inner_trax, actually LabVIEW does not provide such a feature natively; however you can start thinking about having your remote panel VI shutting down after some specific time and then having in your server another VI running always and that each specific time ti starts the remote VI; think about it, it may help you reaching your goal.
Eric NI

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

Hi, I need help on how to update software for my ipad1, can someone help me?

The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

I need help! How can i spend my $0.46 cent? Can I delete it? Because I want to change to my country yet I cannot due to remaining dollar balance..

I need help! How can i spend my $0.46 cent? Can I delete it? Because I want to change to my country yet I cannot due to remaining dollar balance..

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so it goes to Default. thanks

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks

Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.

How many users can be on creative cloud

How many users can be on creative cloud

Hi,
With each subscription you are allowed to download on two different machines, but you cannot use the apps at the same time. So, in short the answer is just 1 person per Creative Cloud subscription.
"Adobe has moved to identity-based licensing with a technology that will not support multiple same-product subscriptions, so you can only buy one membership per Adobe ID. If you need two subscriptions to Creative Cloud, you will need to purchase each subscription with a unique Adobe ID.
When you install your software, you will be required to enter the same Adobe ID that you used when purchasing your membership, for the following reasons:
- To help ensure that the person who subscribed is the same person who is installing the software
- To enable Adobe to send you important account information in the event your subscription is about to expire or cannot be charged to your credit card"
Information is from the Creative Cloud FAQ
Michael

Need help on how implement security.

Hello everybody,
I have developed an application with many pages,
It's time now for me to strat working on the security ....
I will have the following :
-Some pages will be accessible by some users but not some others.
-For some reports, there is a column that will be updatable by some users but nor by others.
-The users will be grouped into groups.
I need help on how can I start develop this security model, creating groups perhaps.....
Thanks for any help.

Jina,
Check out Authorization Schemes in the User Guide and under the Security tab in the builder.
Also search this forum for keywords like "security", "authorization", and "groups"... I think you'll get lots of useful threads.
Scott

From Forms Product Management - How many users can my Forms App run??

A question we often receive on the OTN list is how may users can
your Forms application cope with? - To help you plan and
understand how a Forms application scales, we have completed a
new white paper called "Oracle Forms Services Release 6i Capacity
Planning Guide". Please go to
http://otn.oracle.com/products/forms/pdf/6iscalability.pdf.
In this paper we discuss how you can load test your application,
how to design realistic scenarios and documents Oracle's own
scalability testing of Oracle Forms.
This paper is a valuable source of information for those decision
makers who need to deploy performant and scalable Forms
applications.
Regards
Grant Ronald
Forms Product Management

This is a very useful piece of information however the link
terminated with a period and a space which allow browsers to
display error page, to view this document remove the trailing
space and period or click the corrected link below.
Thanks you Oracle Forms Group!!!
http://otn.oracle.com/products/forms/pdf/6iscalability.pdf

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

Need help on how a user can control a video clip using their mouse

Similar Messages

Maybe you are looking for