Need help on self referencing a ssrs report

Hi All,
I have a graph on one of my report which shows data on level 1 by default and go on showing level 2 and level 3 data on successive clicks. This has been achieved by self referencing a ssrs report and passing respective parameters. Now to identify which level
data needs to be shown on graph, I have used one more parameter which default value is 1 and go on increasing to 2 then 3 on successive click and this parameter value is used in group expression of graph. This works just fine.
But the real problem has occurred when you go and select report parameters which are corresponding to level 1, level 2 and level 2 values and click on apply in between. For e.g. Assume level 1=Region, level 2=SubRegion and level 3=Country. When you run this
report it shows region wise data on graph and value of fourth parameter is 1, now when you click on graph it takes you to level 2 i.e. it shows sub region wise data on graph and value of fourth parameter is 2 but when you go and select all region, sub region
and countries from report parameters and click on apply button then it should show data on graph region wise but since the time you were selecting parameter data was sub region wise and value of fourth parameter was 2 it shows data for all sub regions which
is weird and not acceptable at all.
I am hoping SSRS should provide a way to pass parameters just like we pass in action on any control within ssrs report to solve this issue. Please help me out to solve this issue or let me know if need more infor.

Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards

Similar Messages

Need help showing multiple parameters in a report header

Post Author: Annette
CA Forum: Formula
hi-- i am new to this and i have created a report where the person picks one or more items (they are different hospital suites) and i need for them to print on the report header all of the selections that they chose. right now it only prints the name of the first one they choose..
any help would be good..
i do know it's a string value....
thank-you for anything you can help me with....
basically if 1 is picked then it needs to state that name, if 2 or more are picked id like it to say Name, name, name, etx...

Post Author: Annette
CA Forum: Formula
the actual parameter is a number, but what im trying to populate on the heading is the name of the number..
for example... when you choose the resource unit of 31 when you refresh i want it to show the name of it which is ORA Surgery.... but if they choose 31 & 53 then id like it to show ORA Surgery, ORD Surgery.... right now it just pulls the first name choosen.. does that make sense..
so the parameter is a number, but the name(the one i want populated) is a string
and oh gosh,, thanks for your quick responses..

Need help in identifying fields of sd report creation

Hi Experts,
I need to create report in sd from manual report .The fileds in report are taken from Quickbooks.so inorder to create report in sap I need to identify fields in sap first.we dont had functional guy so i need help in identifying fields in sap for below mentioned report.
Report: invoice distribution report-service billing for all states.
Fields:customer number,customer name,city state,SAP Document number,Invoice date,period(month,year)invoice number,invoice type,currency,invoice amount in usd.
Please help me in suggesting tcodes or table names from where i can fetch these fields.
Thanking you in advance.
Regards,
narasimha.

Hi Experts,
Finally with all above suggestions i have chosen tables vbrk(billing document header data),kna1(customer header),vbrp.
1.I created view to find the output of report with conditions as follows:
tables:vbrk,kna1,vbrp
vbrk-vbeln(invoice number)
vbrk-fkart(invoice type)
vbrk-fkdat(invoice date)
vbrk-waerk(currency)
vbrk-netwr(netvalue)
vbrk-kunag(customer number)
kna1-name1(customer name)
kna1-ort01(customer city)
kna1-regio(customer state)
join condition:
kna1-mandt=vbrk-mandt
kna1-kunnr=vbrk-kunag.
when i execute the report i am getting same value for lot of times.
i am confused how to include sales document number.I hope sales document number and invoice are different.
2.i have also added vbrp-aubel and join condition as
vbrk-mandt = vbrp-mandt
vbrk-vbeln = vbrp-vbeln.
but when i execute the report i am getting lot of duplicated with same value and unknown invoice numbers.
please let me know where i went wrong.
is there any standard adhoc report so that i can manipulate it with above requirement.
vf05n is somewhat useful .is it possible to add customer details in this??
Thanks&Regards,
narasimha.

Need help on Self Hosting Using channel Factory

Hello,
     Need Help.
     I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception.
The scenario is something like below this : -
I want to create the endpoint connection to WCF service. I want to achieve this using custom channel factory(not using default channel factory API provided in .Net Framework).
I have written one class and it is derived from channel factory and we are reading the service endpoints, behaviors, bindings from external configuration file added in the project.
I am able to connect to server side service hosted on different machine using following sample code successfully.
In the case of “self-hosting”  I am receiving following error : --
     "There was an error reading from the pipe: The pipe has been ended. (109, 0x6d)."
Below is the code which I have written for self hosting WCF service using custom channel factory.
// Method where I am calling CustomChannel Factory constructor
internal void ProxyCall(string msgEndpointConfigurationName, string url)
            string appConfigDirName, extConfigFilePath;
            FileInfo configFileInfo = new FileInfo(appConfigName);
            appConfigDirName = configFileInfo.DirectoryName;
            extConfigFilePath = appConfigDirName + "\\" + extConfigFileName;
            this.messageEndpointConfigurationName = msgEndpointConfigurationName;
            if (string.IsNullOrEmpty(url))
                this.messageFactory = new CustomChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName);
            else
               //EndpointAddress e = new EndpointAddress(url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new ChannelFactory<IServerOperationsMessage>(this.messageEndpointConfigurationName, e);
               this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, url + ClientToServerOperations.ServiceAddress);
               //this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, e);
   ClientMessageFormatterBehavior formatterBehavior = new ClientMessageFormatterBehavior();
   foreach (OperationDescription operation in this.messageFactory.Endpoint.Contract.Operations)
    if (!operation.Behaviors.Contains(typeof(ClientMessageFormatterBehavior)))
     operation.Behaviors.Add(formatterBehavior);
   this.messageFactory.Endpoint.Behaviors.Add(new MessageStatisticsBehavior());
   this.messageFactory.Open();
// Custom Channel Factory Class
internal class CustomSelfHostingChannelFactory<T> : ChannelFactory<T>
        /// Custom client channel. Allows to specify a different configuration file
        /// <typeparam name="T"></typeparam>
        private string configurationPath, selectedMsgEndPoint, uriAddress;
        public PPCCustomSelfHostingChannelFactory(string configurationPath, string selectedEndPoint, string uriAddress)
            : base(typeof(T))
            this.configurationPath = configurationPath;
            this.selectedMsgEndPoint = selectedEndPoint;
            this.uriAddress = uriAddress;
            EndpointAddress e = new EndpointAddress(this.uriAddress);
            base.InitializeEndpoint(selectedEndPoint,e);
        //As you can see, a call to the method InitialiazeEndpoint of the base class is required.
        //That method will automatically call to our CreateDescription method to configure the service endpoint.
        ///Loads the serviceEndpoint description from the specified configuration file
        protected override ServiceEndpoint CreateDescription()
            ServiceEndpoint serviceEndpoint = base.CreateDescription();
            return serviceEndpoint;
        private EndpointIdentity GetIdentity(IdentityElement element)
            EndpointIdentity identity = null;
            PropertyInformationCollection properties = element.ElementInformation.Properties;
            if (properties["userPrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateUpnIdentity(element.UserPrincipalName.Value);
            if (properties["servicePrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateSpnIdentity(element.ServicePrincipalName.Value);
            if (properties["dns"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateDnsIdentity(element.Dns.Value);
            if (properties["rsa"].ValueOrigin != PropertyValueOrigin.Default)
                return EndpointIdentity.CreateRsaIdentity(element.Rsa.Value);
            return identity;
        private Binding GetBinding(IBindingConfigurationElement configurationElement)
            if (configurationElement is CustomBindingElement) return new CustomBinding();
            else if (configurationElement is BasicHttpBindingElement) return new BasicHttpBinding();
            else if (configurationElement is NetMsmqBindingElement) return new NetMsmqBinding();
            else if (configurationElement is NetNamedPipeBindingElement) return new NetNamedPipeBinding();
            else if (configurationElement is NetPeerTcpBindingElement) return new NetPeerTcpBinding();
            else if (configurationElement is NetTcpBindingElement) return new NetTcpBinding();
            else if (configurationElement is WSDualHttpBindingElement) return new WSDualHttpBinding();
            else if (configurationElement is WSHttpBindingElement) return new WSHttpBinding();
            else if (configurationElement is WSFederationHttpBindingElement) return new WSFederationHttpBinding();
            return null;
        private Binding CreateBinding(string bindingName, ServiceModelSectionGroup group)
            BindingCollectionElement bindingElementCollection = group.Bindings[bindingName];
            if (bindingElementCollection.ConfiguredBindings.Count > 0)
                IBindingConfigurationElement be = bindingElementCollection.ConfiguredBindings[0];
                Binding binding = GetBinding(be);
                if (be != null)
                    be.ApplyConfiguration(binding);
                return binding;
            return null;
        private void AddBehaviors(string behaviorConfiguration, ServiceEndpoint serviceEndpoint, ServiceModelSectionGroup group)
            EndpointBehaviorElement behaviorElement = group.Behaviors.EndpointBehaviors[behaviorConfiguration];
            for (int i = 0; i < behaviorElement.Count; i++)
                BehaviorExtensionElement behaviorExtension = behaviorElement[i];
                object extension = behaviorExtension.GetType().InvokeMember("CreateBehavior", BindingFlags.InvokeMethod | BindingFlags.NonPublic | BindingFlags.Instance, null,
behaviorExtension, null);
                if (extension != null)
                    serviceEndpoint.Behaviors.Add((IEndpointBehavior)extension);
Thanks in advance !! :-)

Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards

Query output help: Display self-referencing table

Hello,
I'm trying to display in a cfoutput a self-referencing table.
I'll start by showing some of the data in the table.
There are only 3 columns, pl_id (auto increment id pri-key),
pl_name and pl_parent_id (it's 0 if it's a parent, otherwise it's
the pl_id value for the parent).
pl_id pl_name pl_parent_id
1 Country 0
2 Food 0
3 US 1
4 Japan 1
5 Hamburger 2
6 Idaho 3
7 Florida 3
8 Cheese 2
What I'm trying to output is something like this:
Country - US - Idaho (3 levels here) or
Country - US - Florida (or if there are only 2 levels like
the next line)
Food - Cheese
I've tried using a cfoutput with a cfloop as well as grouping
but not having any luck. Could someone clear my clouded head on
this one?
thanks much,
Joe
ps. Adobe should really use a fixed width font for these
forums, it's impossible to line up table info!

JoeNH2k wrote:
> It would be nice if it were that easy, I (of course)
tried that. The sort order
> of the query doesn't matter. The data is not sorted once
the function runs. The
> sort has to come after the select box is populated by
the function. I need to
> get the data at this point and sort it, probably somehow
creating a structure
> or array from this data and sorting that(?).
>
<cfset myArr = ArrayNew(1)>
<cfloop query="qryGetAll">
<cfset temp = ArrayAppend(myArr,
"#getNameWithParent(pl_id)#")>
</cfloop>
<cfset ArraySort(myArr, "textnocase", "asc")>
<cfset myList = ArrayToList(myArr, ",")>
then loop through myList to populate your <select>...
how about that?
Azadi Saryev
Sabai-dee.com
Vientiane, Laos
http://www.sabai-dee.com

Need help adding a second page on reports builder, paper layout.

Hi,
I have a requirement where I need to create a paper layout using Reports Builder (10.1.2.0.2). This report will print out the following:
1) Invoice
2) VAT Slip (on a separate page)
So far I have created the invoice part and it is printing properly. Now I want to add the Vat slip. When I use the "Trailer Section" on the rdf report, I create a frame and inserted some text. The report ran just fine. Then in the same frame, I added a repeating frame. And now the report is completing with the following error:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 86
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
*** glibc detected *** ora_rw20_run: munmap_chunk(): invalid pointer: 0x09067b10 ***
Anyone have any idea why this is happening? Any help is much appreciated.
Or is there any way I can add a page that has to be printed after the invoice?
Thanks
-Nelly

If you have created your own template (but it sounds like you haven't) you will need to 'capture' that page so it repeats on following pages.
The whole process is described here:
"Letterhead and follower sets"
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

Please Need help for change chart automaticly in report builder

Hello,
I have a problem under transfer Builder oracle 6i and I wish that you help me.
I developed a report which contains a Camembert cheese, The parameters to enter are the date of edition and the code of the customer. For every customer that works very well. But when I wish to generate all the customers I have to get back the code of the customer from the request and to spend it in parameter automatically without the seizure of the code, the information of the customer is exact but the Camembert cheese generates without change and I think that I have to cross(spend) the code of the customer in parameter in the Camembert cheese but I do not know how.
My questions:
how to give a parameter in a Camembert cheese under graphic builder either adjournment(transfer)?
do you have another solution so that the Camembert cheese generates for every customer?
Thank you very much

can someone please give a work around for this issue.
Regards,
Amrit

Need help in Multi language XML Publisher report

Hi Experts,
I am working in EBS R12, database 10g.
I am have a requirement to develop the multilanuge XML Publisher report.
Details i have till now:
query in report builder: select * from emp;
RTF: created RTF(test_rtf)
Datadefinition: test_dd
Template:test_t (Language:English, terittory:US, uploaded the RTF)
Requirement: I need the output in English and German Language.
For French language, how to proceed further.... Could somebody help me with procedure to get it.
Do i need to create any RTF and Template for FRENCH language.
Kindly help me with procedure to be followed.
Thanks in advance.

Hi Experts,
I have below procedure to achieve this but still not able to print output in desired language.
1. created rtf
2. created data definition (dd)
3. created template (tt) [language-english, terittory-US, translatable].
4. Exported the translated file(.xlf file) to local system
5. In .xlf file, changed the target language to 'fr-FR' (I want to print in french)
6. It was successfull done and status is complete
Through SRS window, i submitted the program...but it's still showing output in english only not in french.
Note:At SRS window, it's showing only ENGLISH LANGUAGE.
Am i missing anything....How to show desired languages at SRS WINDOW.
Could somebody help me how to print data in FRENCH language.
I hope that i can get the solution from this forum.
Thanks in advance.

Need help on Date Parameters for BIP Report

Hello,
I need to add a date parameter in my BIP report. I have used a date parameter on a BIP report that has a for-each grouping, but my BIP report RTF template that was converted from Actuate do not have a for-each grouping and I was getting an error when I validate the RTF template. Can someone please help?
Thank you

can u send me template and xml . i will try at my side. email: [email protected]
Some times converted templates won't work straight away. you still need to do manual adjustments to make it work based one the requirement u have.
check this:
http://bipconsulting.blogspot.com/2009/08/actuate-to-bi-publisher-reports.html

Need help in creating table in crystal report for visual studio 2010

Since there is no table support in crystal report,how can I create a table in crystal report for visual studio 2010?
I have a datatable and I need to show that in crystal report in table structure.
I have tried using lines and boxes to generate the table but it is not working perfectly.
How can I export the report in excel format in read/write mode saving all the formatting in the report

Hi,
Check sample codes from following:
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
You can download the [Developer's Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm] & [API Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_apiRef_12_en.chm]
Thanks,
Saurabh

Need help connect Access Database to Crystal Report Viewer in java

Need example for passing parameters to PropertyBag Class and IConnectionInfo Class.
We use CR_JRC_11.8
Thanks

A sample that demonstrates how to change the database that a report uses at runtime in the JRC can be found at the following link on the SAP Portal:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0ad3d3d-be66-2b10-2181-f46c6e05a420
To help determine what connection properties need to be changed at runtime through code, create a copy of your original report and use the Crystal Reports designer to change this report to new datasource manually. You can then use the jrc_display_connection_info helper sample to examine what the parameters should be in the property bag before setting the IConnection information. The jrc_display_connection_info helper sample can be found at the following link on the SAP Portal:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706202a4-bd66-2b10-4e8b-92f4a8024ea1
Hope these samples help.
Regards.
- Robert

Need help with Monthly Transaction By Hour Report

Post Author: cbcombs
CA Forum: General
Hello,Newbie needs to write a transaction report that is grouped by days of the week for a calendar month. It will have one column for each day of the week and each of those columns will contain a whole months of week day data. Then it will be grouped by each hour of the day. It will contain the number of transactions for each hour. And then a weekly average of the number of transactions for each hour of the day. The week starts on a Monday and goes through Sunday. They are probably going to want the dollar amount of the transactions too. Below is an example with the first two rows of data populated. Monthly Transaction Report For August 2007 Mon Tue Wed Thu Fri Sat Sun Average08:00 0 2 2 1 10 5 2 3.1409:00 25 3 5 4 5 8 6 4.43 10:00 5011:00 10012:00 15013:00 15013:00 12514:00 10015:00 5016:00 1017:00 2 Any help would be appreciated.

Post Author: kbrinton
CA Forum: General
You could use the cross tab expert and set the columns to the day and the row to hours with it summing your transactions. So for the rows choose your date field and then choose Group options and have it set to "for each hour". Then the column choose your date field and have it set to "for each day". Then have it summarize your transactions.
Hope this helps!!

Complete novice needs help getting SQL Query into Crystal Reports XI

Post Author: MissMarnie
CA Forum: Data Connectivity and SQL
So I was given an intro level web course and a monster reference guide in prep to format a report. One of our developers wrote me everything I need for the report into a SQL Query and now I'm supposed to format it in CR XII literally do not know what to do from here. I'm able to set up the correct server as a datasource, if that's useful, but I don't know how to make the querey into a bunch of formattable fields in CR. If anyone can walk me through this, I'd be so grateful. I've attempted to look up SQL query in both the help and the book but I keep hitting a wall. The help dialog says things like "press this button" with no reference to what "this button" is. I'm sure it's obvious to the knowledgeable but I'm in a complete fog. Thanks in advance

Post Author: synapsevampire
CA Forum: Data Connectivity and SQL
IF you're trying to get assistance with setting up a query as the source for a report, try posting your Crystal version and the database type.
Different software works differently.
In CR 9 and above, under the connection to the database you'll see Add Command. Select that and you can paste the query in.
As for not knowing how to generate a report, that requires experience, there's no generic solution of course..
-k

Need help pulling unrelated counts into a report

Post Author: tminner
CA Forum: Crystal Reports
Right now I'm using Crystal 9 to create Performance Reviews for all our employees (about 400/month) and everything is fine except I need 4 counts for tardies, warnings, absences, and suspensions. Of course these are kept in unrelated tables for example I'm counting tardies from VP_TIMESHEETCOMMENTS.comments = "Tardy-Late for Work" and absences from VP_TIMESHEETCOMMENTS.comments = "Absent".
When I create running totals for these it works fine, however when I try to count warnings from EVENTS.event = "Warning" then all my running totals give me wrong information.
What would be a better way of doing this? I'm also grouping by person ID and have the entire Performance Review in the group footer. I just need accurate counts for the last year. Please help....
Tim

Post Author: crimson
CA Forum: Crystal Reports
Try this:
If you are grouping on 'person ID' in your main report, group on 'person ID' in your subreport. Then from your main report, Right Click on the subreport. Click on Change Subreport Links. Set up a subreport parameter field 'person ID' and it will create a parameter field in the subreport (ex: ?Pm-person_ID) that ties it to the group value in the main report. Be sure and click on the checkbox that says "Select data in subreport based on field:" with the person ID field name right underneath it.

Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

Hi Everybody,
Did any body developed Funnel based graph report in Answers..
Scenario: I need to develop a report which is based on 4 Facts(4 Subject Areas) Report is sectioned with 4 block one blovk with one Fact Metrics like this four blocks.
If any idea on such scenario it will be huge benefit for me.
Thanks in advance.
Thanks,
Govardhana

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

Need help on self referencing a ssrs report

Similar Messages

Maybe you are looking for