Need help on the Portal Logged on Users Custom tool

Hello Everyone
I am trying to build a tool by following the below blog written by Micheal Nicholls,
Building a tool to monitor who is logged on to an SAP NetWeaver Portal...
can some body suggest me on how to start building this.
I am assuming I need to create two portal components and create an iview with the second component. so that it will fetch the users from the file wher the first component has placed on the temp directory. is it correct.
Do I just need to deploy the first component or do anything specific with that?
could some body pls suggest me regarding this. Appreciate your valuable answer.
Thanks
RIo

Yes you need to make two components and deploy them to your portal. After that you need to find the file SessionManager.jsp at the o/s level of the portal and replace the call of the rtc_script with a call to your component. Restart the portal server and see what happens!
Please note that this is not supported. The idea was to show how you might want to proceed. It is not a fully functioning solution.

Similar Messages

Need help regarding the location of Exchange 2013 Logs for parsing

Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
Matt

Audit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx

When I log in the Portal using Administrator user, I can use it correctly.

I have created a Room IView.
When I log in the Portal using Administrator user, I can use it correctly. However when I am using another user, I get this error message:
com.sap.portal.pcm.Title
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/00a2953f-0d06-2a10-749d-afc6884d33a7/workset/com.sap.netweaver.coll.ProjectHome/relatedItems/DynamicNavigation/com.sap.netweaver.coll.ARoomQuickLaunch
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
What should I do??
Regards
Ika

Hi Ika,
This seems to be a permission issue.
Go to the pcd and give read access to portal_content/com.sap.ip.collaboration/Rooms .
That should solve the problem.
Points are welcome if this helps
Rgrds
Vineeth

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

I am having the same problem...did you ever fix it?

My Tasks View in my custom task list fails to display the tasks assigned to me (that is the currently logged in user)

Hi
I am new to sharepoint 2010.
I created a custom task list, where I have many tasks assigned to users (I had tasks assigned to me as well). I created a view as "My tasks "and having a filter as Assigned To is equal to [Me]. When I do that my view fails to show the
tasks assigned to me. This happens same with the Sharepoints 'My Tasks' view as well. I tested by creating some test tasks under my name and when I selected 'My Tasks' view no tasks are getting displayed.
Please help.
Thanks,
Gokulkumar.

Hi,
According to your post, my understanding is that you wanted to display the tasks assigned the current logged in user.
In my environment, if I used the System Account, My Task view didn’t display any tasks.
However , if I used other users except the System Account, My Task view could display current user tasks correctly.
I recommend to use other accounts except System Account to log in site. Then everything will work well.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to access Portal Logged in user in Web Service application

Hi Experts,
I have created one Deployable Proxy and based on that i have created Web Based (WAR) project. to consume the proxy i have created Servlet based java file which invokes Web services. Based on this WAR project i created EAR application which deploys on J2EE server.
I am facing issue while accessing Portal Logged in user in my Servlet Class in WAR project so can you please provide inputs for how we can access Portal Logged in user in our Servlet class? also how we can access LDAP detailes of portal Logged inuser ?
I tried to fetch the Logged in user from servlet request but i can't access it giving me null value. Following is the method details that i am using in my servlet.
protected void doGet(HttpServletRequest request,HttpServletResponse response)throws ServletException, IOException
IUser user = UMFactory.getAuthenticator().getLoggedInUser();
String strName = user.getFirstName();
If I checked in LDAP values First name for logged in user is present but in my code its giving Null value.
Can you please provide your inputs on above issue.
Regards,
Rahul

have you found a solution this problem yet?

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Get the current Logged on User on Mobile Client

Hi
I have to display the current logged in User of the Mobile client in my application. I think I have to use the User and UserManager API for that. But the thing is I am not able to instantiate the class to use the methods in it.I think I have to create a session object for using these classes, but in Session API I can see that I will have to create a new session and I want to use the current session.
Please tell me how to use these APIs and get the instance of User or UserManager.
Regards,
Priya

Hi Priya,
You can try with:
User user = UserManager.getInstance().getCurrentUser();
The User interface has methods to get relevant information (for ie. getName() or getFirstName()), take a look on the [javadocs|http://help.sap.com/javadocs/nwmobile/SP3/laptops/com/sap/ip/me/api/user/User.html]
Best Regards,
Simon.

I need help on the below problem..

Hi All,
I need help on the below problem..
I've 2 Schemas called
1. MAXIMO and DBLink is GQMFOF
2. GQMMGR adn DBLink is MAXFOFNC
Now i would likw to retrive the data from both the schemas,
i.e some columns from WORKORDER table of maximo schema and some columns from ESTIMATE_HEADER table
of GQMMGR schema..
I'm trying to get the data using DB links, but it is giving TABLE/VIEW doesn't exist.
Please help me on this.
Regards,
gr.

Does your user has the SELECT privelage granted for accessing those tables?

I need help with the processes running a media server.

Hi there!   I need some help with the following log please. The processes listed I am assuming are the current processes being used from my MacBook Pro to the media server? Is that correct? Are these common processes?
Incident Identifier: EC931B64-E141-4C64-B428-427DF014C7E8
CrashReporter Key:   b16be41bf16206d8f231e7e71676ab2a9c4dd25e
Hardware Model:      iPhone4,1
OS Version:          iPhone OS 5.0.1 (9A405)
Kernel Version:      Darwin Kernel Version 11.0.0: Tue Nov 1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
Date:                2012-08-24 16:06:18 -0400
Time since snapshot: 152 ms
Free pages:        1195
Wired pages:       88383
Purgeable pages:   0
Largest process:   mediaserverd
Processes
         Name                 UUID                    Count resident pages
             atc <2271ed33ec773eeb9f381bf1baac9dee>     390
       securityd <e31a714c227a3d1c98ef8aacd44d91ee>     243
         assetsd <281396d3e7d831fbb6a5374157663dbc>    1370
      MobileMail <7064f2baf3f23db987bc8ec99855fe53>    1438 (jettisoned)
        mstreamd <cbe9881735043a389e7cdad3b5bcf5ce>    1099 (jettisoned)
          Camera <88291709452932ac9cbd0f1c06902214>    3105 (active)
     dataaccessd <b4f61f117ee635c48329af8572733d30>    1760
     MobilePhone <fe38c6944a053c9187b41ee50aa151b0>    5549
        networkd <6ee7a78e56073f6e8db4c2cc3265fdb4>     170
      aosnotifyd <58089d732ab43bbea0aec4a6f812f446>     320
        BTServer <e03baab8e0103188979ce54b87591065>     261
      aggregated <68a25a1690cb372096543a46abed14d7>     337
            apsd <e4b6e6e4f31e36f79815747ecbf52907>     291
   fairplayd.N94 <2c0105776e393b39ba95edffaf3bdd17>     294
       fseventsd <78af02202422321885dfc85c24534b0e>     170
            iapd <3ee7f82879033b4fb93b9cf1f4ecae29>     366
         imagent <8e2042f2ec9e3af9ba400f031f1bbfa7>     416
   mDNSResponder <b75f43f012ad3d9ea172d37491994e22>     265
    mediaremoted <b9fa7d1381013c2fa90ea134ff905f59>     258
    mediaserverd <478e5e8345c83be5ba1868906813bb75>    6774
             ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19>     389
           wifid <e176ab123beb3000bdb89e020612c1d6>     284
       locationd <91c84ab19dd03e4ab1b4cc30178ab1c0>     831
          powerd <25ddef6b52e4385b819e777dd2eeed3c>     167
       lockdownd <a68aa1526ef13a9bb4426bb71ffc1e3c>     250
      CommCenter <51922c9a50e73fe3badccaa4b1b1123b>     781
         syslogd <dd3766bcb1213e91b66283635db09773>     107
     SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d>    5673 (active)
         configd <3430c0025ed13f56800a329b7254d2ae>     418
         notifyd <3793fabace3a385687b3c29c1fa1fcac>     252
UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa>     433
         launchd <cc35dd7a872334319ed028e6bbeae081>     133
**End**
Thanks a bunch!!!

COULD NOT OF BEEN BOUGHT BRANDNEW IN 2011** apologies

HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>

You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend.

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access. i.e. my wife

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife

Greetings Niel
I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
Can you still assist?

Hi everyone, to use the portal with many users using the same portal user?

I have an another question is possible to use the portal with many users using the same portal user with diferent roles in the same time?
thanks

Hi Israel,
It is possible to have same user logged in through differnt terminals or browser windows. However if there are say 10 roles assigned to that user, all 10 will be visible in all the windows. However you may open and work on different roles.. in the different windows.
Note that the real time collaboration features shall not be available if the same user logs in multiple times.
Hope this is useful.
Regards,
Anagha

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

Need help on the Portal Logged on Users Custom tool

Similar Messages

Maybe you are looking for