Need help on Transport Requests in BI

Hi All,
I am doing BW Transports. I have collected all info Objects with Option "Necessary Objects" in one request.
In 2nd Request, i have selected Data target with the Option "Data Flow before", so that i can get all the objects from Datasource to Data target. By Default, the Info Objects Checkboxs are disabled and transport requests are displayed for Infobjects alone.
My Query is, there is a info Object called 0PLANT, which is having seperate data flow for master data. Do i need to install seperately for Master data flow. ie)0PLANT_ATTR of transfer rules and other Objects.
Or it will automatically be installed while collecting the 1st request itself.Please help on this issue.
Thanks,
Siva.

HEllo,
First check whether 0PLANT is already in the prod box and whether its loading. Its a part of global master data and there are chances that it already may be in use.
If so then there is no need to capture and re send it.
Secondly, if its not available till prod, then you need to analyze whether you really need to load 0PLANT master, if your requirement does need it then only you need to capture it and sent it ahead.
Check your first request and verify if its already captured. If so then no need to capture it again, rather the system wont allow you to capture the objects which are already locked in some other active transport request.
Regards,
Shashank

Similar Messages

Need help in fetching requested data from JSP

Hello,
I really need help in fecthing requested data from JSP to servlet. Can anyone assist me as soon
as possible because I must finish my program by today.....( 20/02/2002).
Thanks in advance.

It is very likely that somebody can help you, if you say what your problem is. In fact somebody might already have helped you. What is your problem?

Need help on transportable tablespace, after convert and move datafile over

I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.

I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?

Need help on Adhoc Request functionality in PI

Hi Experts ,
Need help on the design approach . How can PI handles if Sender System prefers to send an Adhoc Request(Outbound) to PI .
Here is the complete requirement .
" An Adhoc Request is send to PI from the Legacy Sender System (Whenever Legacy system has Planned and unplanned shutdowns) . Legacy system uses web client based request ( HTTP ) to PI . As soon as the http request is received to PI . PI needs provide back the information to Legacy System "
Note : PI needs to provide the Requested data to Legacy system from the External Shared folders . (Data content is stored in an .xml format in shared folders)
I can see file adapter is one of the option which i can choose to connect to the external folders .
How can i achieve the Adhoc Request functionality ? Needs advice and suggestions on this please ?
Regards,
Khan

Hi Aziz - I don't think you should worry about "Ad hoc" here. It's nothing but a specific request from your sender application.
Please refer to the scenario #8 SOAP- File and i assume it would be the same case with your interface.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f96dbf-adca-3010-ffb5-daf2d1f0e276?QuickLink=index&…

Help..Transport request

Hi All,
Can anybody guide how to import transport reqests of diffrent sap landscape to my SAP landscape. List is also too log 500 nos. Is it possible? if yes plz tell me how to import these request. Plz reply ASAP.
thanks and regards,
Vikram

Hi
 first copy all the data & co-files in the necessary directories as specified earlier.
Steps to Import a Request
1. Go to Transport Management screen, using STMS transaction code.
2. Go to Import queue. Overview  Import (F5)
3. Now in the import queues select the appropriate queue, into which the request has to be imported.
4. Then select the queue into which that particular request has to me moved. And refresh that queue to see latest updates. Then select for that particular request, and click that truck icon (import request).
5. And select the necessary options in the window and click ok.
Note
In synchronous mode, the request will assigned to a dedicated dialog or batch process, which is blocked until import has ended.
In asynchronous mode, the request will not be assigned to any dialog or batch process, any work process which is in waiting state will handle that.
Conditional Imports
Conditional imports can be done at OS level commands with the number associated with u describes the condition for transports; here Basis can select multiple options at a time.
0 Imported transport requests are not deleted from buffer
1 Ignore that the change request has already been imported
2 Overwrite originals
6 Overwrite objects in unconfirmed repairs.
8 Ignore restrictions based on table classification
9 Ignore the fact that the system is locked for this type of transport.
At Application level (Transaction STMS) user can state the conditions while importing the request on following screen.
6. We will see truck icon in the request status.
7. After import is completed, we can see the return code of the request in RC column.
8. If the request ended with errors, then check the log files for details of the error.
9. If the request is terminated, then the corresponding data & co files are missing or some log file will be missing. If the data & file are place, try re-importing the request.
hope this info helps!
with regards,
raj.
pls, award points

Need help with transporting User Exit Variable in CMOD ZXRSRU01

Hello Gurus.,
I changed the existing user exit variable in CMOD ZXRSRU01.,before changing neither it ask for any transport request, nor when I activated the include program .
Well., I tried this........I went to goto-> Object Directory Entry.,
changed the Package and person responsible for and then it asked for transport request...but this dint work...
Now., how can I capture the changes in a transport request, so that, i can move the changes to production system?
is there anyway to solve my problem?
Regards,
PNK

Thanks for ur help VIKRAM...i solved the issue...the changes are captured in someother request, but it was not showing in the Version Management.'
I checked the Lock Overview in the Object DIrectory Entry and found out that it was capturing in different request. I released the request and when I tried to change the code, it asked for new transport request.
It worked..
Thanks for your help..
Regards,
PNK

Need table for Transport Request component

Hi,
I need the name of the table that stores the TR name and all the Objects to be transported in them.
Thnx in advance,
Chirantan

Check E070
E070 Change & Transport System: Header of Requests/Tasks
E070A Change & Transport System: Attributes of a Request
E070C CTS: Source/Target Client of Requests/Tasks
E070CREATE Change & Transport System: Creation Date of Request
E070DEP Change & Transport System: Dependencies of Requests
E070L CTS: Index for Assigning Numbers to Requests/Tasks
E070M CTS: Target Development Class/Layer for Requests
E070N UNIX/SAP User Connection
E070P Path under which a C correction is created
E070TC Help Table for E070 for Client-Specific Imports
E070USE Use of Current Requests by Users
E071 Change & Transport System: Object Entries of Requests/Tasks
E071C Change & Transport System: Client-Specific Lock Flag
E071E Lang. Transport: Positive List for Generic Object Selection
E071K Change & Transport System: Key Entries of Requests/Tasks
E071KF Change & Transport System: Nametab Information on Key Fields
E071KFINI Change & Transport System: Nametab Information on Key Fields
E071L Language Transport: Transport Information
E07T Change & Transport System: Short Texts for Requests/Tasks

Need help to this request urgent plzz

Hi i am new to coldfusion i had a form and in form we have two date fields like date1------------ to date2---------------- and i need to make the second date field default to 7 calendar days from the first date field that was entered.The new date field needs to be non changale
any help regarding this
thanks.

Thanks BKBK for ur help but i had problem with this
because i had a componet that is used to select date ie datepicker so when i try to do this i am getting
error , below is my code , would u please help me
<cfform name="dateForm" id="dateForm">
<table>
 <td width="440">
 <cfinput type="text"
 name="avDateFrom"
 message="Job Available Date missing - please reenter in the mm/dd/yyyy format."
 validate="date"
 required="Yes"
 size="10" > <cf_calendar datefield="avDateFrom">
 through 
 <cfinput type="Text"
 name="avDateTo"
 message="Position Available date is missing, please reenter in the mm/dd/yyyy format. "
 validate="date"
 size="10" bind="javascript:addDays({dateForm:avDateFrom})" ><img align="absbottom" src="/media/701/calendar.gif" alt="date"/>
 </td>
</table>
</cfform>

Need Help with Transporting Playlists Back to I-Tunes

If anyone can help with this issue, I would really appreciate it. Here's my situation:
After many long hours organizing my playlists on I-Tunes, my pc malfunctioned and I needed a complete software overhaul. Therefore, I have had to reinstall all software programs on my computer...including I-Tunes. Due to these procedures, I have lost all of my playlists on I-Tunes.
I did manage to save all of my songs to an external hard drive, and I have copied them back to my I-Tunes library (albeit without any playlists). What I would like to be able to do is transfer the organized playlists from my ipod back to I-Tunes to avoid a massive reorganization project.
I should point out that hardly any of my music has come from buying songs on I-Tunes so the "Transfer Purchases" option does not seem a viable option.
Thanks so much to anyone who can offer suggestions.

Aside from the method I already mentioned in this thread, there is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola.

Need inputs in Transport Request

Hi Experts,
I have done one file to file scenario with out IR. Its just transferring the file from one FTP to other FTP server.
My scenario is working fine in production.
Now i need to develop the two more channels and two more agreements and colloboration profiles.
So when i select for transport using CMS, can i select individual objects and select the required channel/agreements/profiles.
I just want to add these new development to the existing scenario in the production.
Please suggest selecting individual objets works..
Thanks,
Bhaskar

what i want is i need to add newly developed channels and agreements from dev to the scenario working in production.
Transport the Configuration scenario....new changes will get added and even the existing wont be lost....you can even transport the objects one-by-one....did I mis-understood your question :S .....suppose if I make some changes to Message Interface and Interface mapping in DEV and have to transport it to PROD....then i transport the Namespace from DEV to PROD....so that nothing is lost...just new change is added.
Regards,
Abhishek.

Help on Transport Request Error

In a client System while transporting from development to quality the following two errors ended with number 8
Please could you give cause and Solution
1. ABAP Dictionary Activation (manually the checked the tables and tables were activated)
2. Generation of Programs and Screens.

Hi,
While transporting the Tables , we have to take the special care.
See to it all the data elemnts , domains are activated in the dev server.
While transporting the programs , screens etc we need to check whether all the dependant includes function modules etc are transported together.
some times the data elements ,Function modules etc may not be present or active in the quality server.
To find out that,you can check the log in the quality server.
Or in the dev server you can check the activation log for each server.
Feel free to ask any other info..
good luck..

Need help with Payment Terms

Good Morning SAP Gurus-
I need help with an request. My client wishes to create a new Payment term with the following:
Due date should fall on the 1st day of the month after the due period of 60 days end of month. So for example; an invoice with document date of March 8th should have a due date of June 1st 2012.
How would I configure that in OBB8?

OBB8
Base line date as "Document dat"
Fixed day 01
Additional months 2
try this,
thanks

How can i change transport request description

I need to change transport request description for one table
Note:
Considering this post as Basic and Locking it for futher postings.
Answer: Double click on the Request and using the change option, change it's Description
Edited by: Vijay Babu Dudla on Jun 29, 2009 7:02 AM

Hi,
I know I am a little to late to the party! But for all those who are going to search for this in the future there is a very good blog...i am posting the link below...
Basically run the program RDDIT076...
http://scn.sap.com/community/abap/blog/2015/03/12/program-to-change-transport-request-description-after-release
Regards,
Divaker

How to create a Transport Request?

Hi Experts!
I need transport all my BI objects from Development to QA.
I need create a Transport Request for this by t.code SE09..
What type of transport must I create ? (workbench? customizing?
Is a good idea create a request type 'relocation of complete package' and move all $TMP to a new package?
thanks!

Hi,
Usually when you try to transport the object, the popup for TR at the heading shows which type of TR is required.
All the objects other than like customizing related objects like tables can be transported using workbench TR.
objects which are in $TEM development class are not able to Transport. so you need to change to user defined development class then you can transport.
Reg,
Vishwa

Creating transportation requests.

Hi,
how can I create transportation requests for all customizing objects created before setting in trx SCC4 "Automatic recording of changes"?
Best Regards

Hi,
the problem is that before setting "Automatic recording of changes" there were being created customizing objects as company code, plant etc.etc. without transportation requests.
Now what I need is creating transportation requests, for those objects without transportation requests for the above reason.
To do this I found in SAP customizing implementation guide (SPRO) that in each customizing object from the menu is possible do that clicking Table view, Transport.
Best regards

Need help on Transport Requests in BI

Similar Messages

Maybe you are looking for