Need help Reporting a post

Hi. I'd also like to get some assistance in reporting a message and ultimately having it removed. The user has intentionally posted a potential hack for a piece of software and is encouraging other users to steal. If someone with some points could report it for me, I'd be grateful.
Last Message: https://discussions.apple.com/message/23784678?tstart=0#23784678
Thread: https://discussions.apple.com/message/18249268#18249268
Username: William Stanton

Twice, acually.
Cheers, mate.

Similar Messages

Need Help on HTTP Post ?

Hi @,
I need to perform HTTP Post from webdypro application some XML data. How can I do this , I tried searching forums and blogs but couldn't find a suitable solution or Help.
Is it possible or will have to go for any external apis to achieve the same?
Regards

Hi,
This is possible - though not directly with Exit Plug of Interface View Controller.
You need to use Suspend plug to pass parameters with http POST. See this thread and this document for further directions.
From thread above, Replace
Map postParams = new HashMap();
postParams.put("Key1", "Value 1");
postParams.put("Key2", "Value2");
postParams.put("Key3", "Value 3");
wdThis.wdGetWDSuspendResumeWindowController().wdFirePlugTestSupend("http://www.sap.com", postParams);
with
WDDeployableObjectPart deployableObjectPart = WDDeployableObject.getDeployableObjectPart(deployableObjectName, "TargetApp", DDeployableObjectPartType.APPLICATION);
String urlToTargetApp = WDURLGenerator.getApplicationURL(deployableObjectPart);
Map postParams = new HashMap();
postParams.put("Key1", "Value1");
postParams.put("Key2", "Value2");
postParams.put("Key3", "Value 3");
wdThis.wdGetStartWindowController().wdFirePlugStartAppSuspend(urlToTargetApp, postParams);
In target application, onPlugDefault, use this code to get the values for parameters.
String val1 = WDProtocolAdapter.getProtocolAdapter().getRequestParameter("Key1");
String val2 = WDProtocolAdapter.getProtocolAdapter().getRequestParameter("Key2");
String val3 = WDProtocolAdapter.getProtocolAdapter().getRequestParameter("Key3");
wdComponentAPI.getMessageManager().reportSuccess(val1 + " - " + val2+ " - " + val3);
I've used this and it works.
Hope it helps.
Regards,
Sunaina Reddy T

Need help in getting posts deleted

HI,
I was trying to post a query problem whcih has been answered by Hugo earlier, but ran into "Unexpected error" and am unable to delte the post now, or even access it.
All post are in t-sql forum.
Can you please help delete them. These are the 2 recent ones.
Regards
Akhil

HI,
I was trying to post a query problem whcih has been answered by Hugo earlier, but ran into "Unexpected error" and am unable to delte the post now, or even access it.
All post are in t-sql forum.
Can you please help delete them. These are the 2 recent ones.
Regards
Akhil
hi ,
sign in , click delete and thats it if it does not go report it , left below of a post and state in the windows that opens that you want it deleted , a mod can then do it when he or she has the time
have a nice day and happy new yearhttp://www.microsoft.com/security + http://www.microsoft-hohm.com/default.aspx + http://www.getpivot.com/ + http://photosynth.net/ + http://seadragon.com/ + http://blogs.technet.com/mmpc + http://windowsteamblog.com/blogs/genuinewindows/default.aspx + http://technet.microsoft.com/en-us/sysinternals/default.aspx + https://www.microsoft.com/security/portal/Shared/Resources.aspx#rss + http://www.microsoft.com/security_essentials/ + http://onecare.live.com/site/en-us/center/whatsnew.htm + Plagued by the Privacy Center? Learn how to remove it > http://blogs.msdn.com/securitytipstalk/ + http://blogs.technet.com/ecostrat/ + http://memory.dataram.com/products-and-services/software/ramdisk + 50 Windows Tips > http://windowsvj.com/wpblog/2009/12/windowsvj-xclusive-release-windows-7-tips-tricks-ebook/ + http://windowsteamblog.com/

Need help on no post screen/ all outboard gadgets work

1st-time building from scratch. when i power up, all the right fans and devices run that are supposed to, but no signal to monitor and d-bracket does not light up, cpu fan going, vga fan right, both opticals going. had thought 480w would have been enough to power everything.

thanks, c things are better and wierder, posted and started to make my bios adjust. only had cpu, psu, dvd's, vga, and hdds hooked up,
sata 1& 2 hdds were reported as IDE 3 & 4. 2nd (slave) dvd not reported. couldn't unlock the raid menu to configure so I partitioned hdd 1 and loaded
windows for the heck of it. power readings were: Vcore 1.34-1.37, +3.3v 3.42, +12v 12.09, +5.0 5.13, batt 3.25, +5vsb 5.21
Do I need a new psu to power the other cards and fans/mods? good call there, now more chipper about the beast.

Need help for a post-processing "trigger"

Dear all,
Without getting into much detail, I have a system that is simultaneously introducing a sinusoidal Force (F) and measuring the sinusoidal response (X) of a structure under resonance. I need to acquire the whole time signal, including the free decay response in the end (please find attached a sample picture of the time signal and the corresponding data file), so I cannot use a trigger during the measurement. During the stationary response it may be seen that the signal has a slight negative slope: that is due to a phenomenon of dilatation of my structure that is dissipating heat at the same time.
My problem is how to know exactly when my NI-USB 6216 DAQ has stopped the excitation force, which, in my sample waveform would be around 0.025s (I require an automatic process of identifying it).
Is there any VI, filter or trigger function that might provide me that information?
Thank you in advance for your help.
Kind regards,
Diogo Montalvão
Attachments:
R50_18um_controlo_40_60_temp_24_1_12_v0_time_16.txt ‏373 KB

The brute force method:
Can't you use another analog input channel and capture the excitation voltage?
Or if you have a shaker with an amplifier that provide a current monitor output you can capture the excitation current and might find that due to the voltage control some amount of force is still introduced after setting the control voltage to zero and you might have to implement a system model that include the shaker and the output impedance of your amplifier :0
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

I need help report

hi bw gurus,
our team implementing bw for client,client requirement is to see the report weekly wise llike 1 to 7(1st week),8to14(2 week),15to21(3 wk),22 to 28(4 wk) and remaining days r 2 r 3 days take 5 th wk like this report display by user give period in the selection screen, weekly wise for everymonth seperately should dispaly, is ther any function module to calculate month covert to weeklly of everymonth else need to write code in variables,
give me suggestion how to proceed,
i would appriciate anybody give response.

Hello Ravi,
I suggest to setup a fiscal year variant. The periods (52 or 53) represent the week and should map the required days. Then you can use the automatic time derivation in the update rules to fill fiscal period from the date in your data source.
Regards,
Marc
SAP NetWeaver RIG, US BI

[SOLVED, Thanks]Need help with pacman post install

Hi
It took me a bit of time to install arch but i finally did it, turns out i just needed to disable ipv6. Anyway yesterday everything worked fine and now that i try to complete the install by downloading a wm suddenly pacman refuse to download anything, it says it can't synchronise. Can anybody help pls ?
http://www.hostingpics.net/viewer.php?i … roblem.png
Last edited by oozernem (2015-05-09 08:15:51)

Head_on_a_Stick wrote:
Have you tried:
# systemctl start dhcpcd.service
If that brings your connection up, use:
# systemctl enable dhcpcd.service
https://wiki.archlinux.org/index.php/Be … uide#Wired
Thanks m8, it fixed it
Thanks to everybody else who replied in the thread.

Need help on Tuxedo11g post installation

Hi,
I've installed Tuxedo 11g in Linux 5.3. Can anybody please tell what is the post installation steps to complete the configuration.

Hi,
I'm assuming you are using the workstation protocol. If so, after installing the client, you need to set the "standard" Tuxedo environment variables. There should be a script installed in the TUXDIR (where Tuxedo was installed) called $TUXDIR/tux.env that will set all necessary environment variables except WSNADDR. WSNADDR needs to be set to point to the host and port that the WSL is listening on. Also, your client application needs to be built using the -w switch to the buildclient command in order to use the workstation protocol.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Need help reporting

Hi all,
Before excuting query one pop up box coming in that i dont want to populate one field how to remove that field (that is restricted key figure)
Eg: one key figure like current fiscal year
and one is previous fiscal year
these both are populating when i am going to excute the query but my requirement is i have to populate one key figure that is current fiscal year
help me out
thanks,
phanidhar

Hi
There is user enrtry variable which is causing pop up for that field to show up..
Remove up tht var from query - you will be fine
thanks for points assigned
gaurav

NEed help with HTTP Post

I am doing an application to login to www.ideas.singtel.com website. There is no error but how do i know that my userName & password is verified?
[codeimport java.net.*;
import java.io.*;
import java.awt.event.*;
import javax.swing.*;
import javax.net.ssl.*;
class demo_process implements Runnable, ActionListener
     private Thread on;
     //Create Output & Input Stream
     //Connection
     private URL url;
     private URLConnection connection;
     //Create The GUI
     demo client1;
     public void actionPerformed(ActionEvent e)
          String command = e.getActionCommand();
          //TC_MainGUI1 Action Performed
          if(command == "Log In"
          && !(client1.userName.getText().equals(""))
          && !(client1.password.getText().equals("")))
               on = new Thread(this);
               on.start();
               //sms client2 = new sms();
          else if(command == "Log In"
          && !(client1.userName.getText().equals("")))
               JOptionPane.showMessageDialog(client1,
               "Invalid Password");
               client1.userName.setText("");
          else if(command == "Log In"
          && !(client1.password.getText().equals("")))
               JOptionPane.showMessageDialog(client1,
               "Invalid User Name");
               client1.password.setText("");
          else
               JOptionPane.showMessageDialog(client1,
               "Invalid User Name & Password");
               client1.userName.setText("");
               client1.password.setText("");
     public demo_process(demo client1)
          this.client1=client1;
     public void run()
          Thread thisThread = Thread.currentThread();
          //Establishing the connection
          try
               url = new URL("https://www.ideas.singtel.com/myideas/AccessController.jsp?");
               connection = url.openConnection();
               login();
          catch(IOException e)
               System.out.println("Cannot get connected!");
               System.out.println(e);
     public void login()
          try
               //Send the Mobile no. & Password
               connection.setAllowUserInteraction(true);
               connection.setDoInput(true);
               connection.setDoOutput(true);
               connection.setUseCaches(false);
               connection.setDefaultUseCaches(false);
               //Establish the Input & Output Streams
               OutputStream ostream = connection.getOutputStream();
               String send = "userName="+client1.userName.getText()+"&password="+client1.password.getText();
               byte[] send2= send.getBytes();
               ostream.write(send2);
               ostream.close();
               System.out.println(send2);
               System.out.println("Echo: " + client1.userName.getText());
               System.out.println("Echo: " + client1.password.getText());
               InputStream in = connection.getInputStream();
               InputStreamReader r = new InputStreamReader(in);
               int c;
               while((c = r.read()) != -1)
                    System.out.println((char) c);
               System.out.println(c);
               in.close();
          catch(IOException e)
               System.out.println(e);
}]

If "form2.php" processes the POST request then you shouldn't be sending it to "myform.php" in the first place.

Need help with http POST concept

hi i just started learning about HTTP..im trying to pass a value from a thin java client from command prompt through POST method directly to a destination (another java bean) without any HTML/jsp (no pages) .
i've created a caller.java which is used on command prompt :
java caller param1 param2
then, this caller will actually point to a struts path on my server, (which i think is a servlet) and do proper processing.
caller.java :
public static void main(String[] args) {...
String url = str + "/do_something/prog0001_getAnswer?" +
"param1=" + args[0] +
"&param2=" + args[1];
URL server = new URL(url);
HttpURLConnection connection =
(HttpURLConnection) server.openConnection();
connection.setRequestMethod("POST");
connection.connect();
System.out.println("connecting to server..... " + connection.getResponseMessage());
then on servlet :
httprequest's .getParameter("param1");
httprequest's .getParameter("param2");
to obtain the values.
even if set my URL's instance (server) 's RequestMethod to POST, i'm still able to obtain the parameter values in the servlet? I thought POST method requires different way to pass the values to a servlet? i've been searching..the most i could get are examples with HTML's FORM's name attribute

What method have you written in Servlet?
service, doGet or doPost.
If you have written service, then it does not matter what mthod you specified.

ME_PROCESS_PO_CUST - Need Help on Methods POST, PROCESS_HEADER

Hi,
I will explain the requirement and my approach and the problem i am facing.
During save of Purchase order, a confirm popup should be shown and according to the user confirmation, it will hit a Z Field in CI_EKKODB.
For this, i implemented the solution in BADI ME_PROCESS_PO_CUST and Method POST. Even though i use SET_DATA to set the data, it never updates the database table.
For testing purpose, i put the code in Method PROCESS_HEADER, the SET_DATA worked fine and it finally updated the database table. So, I thought of implementing the solution here by checking sy-ucomm and executing only during SAVE of PO. But here my problem is, Not always all the time this PROCESS_HEADER method executes. For example, If you change any header data and Press "Enter", then the "PROCESS_HEADER" is called. and then immediately without changing any data and you Press "SAVE", the Method PROCESS_HEADER will not be called.
Could you please anyone suggest me either how to forcefully call the PROCESS_HEADER method everytime or is there any other way to set the Z Data into the database table.
Thank you in advance.
Karthik

I have the same issue. Do you know how you solved ths issue? if so can you please post the reply. Thanks

Need help. first time posting

i was updating my iphone and it came unplugged,so then i had to restore it. After the restore all my numbers were gone. is there anyway i can get them back? ANY help will be greatly appreciated.
thanks for any help.

OPEESE wrote:
i was updating my iphone and it came unplugged,so then i had to restore it. After the restore all my numbers were gone. is there anyway i can get them back? ANY help will be greatly appreciated.
See if you can find them in your PC, likely somewhere in 'MyDocuments'. If they are there (e.g., a prior backup version) you can probably put them somewhere that can be found by iTunes. Otherwise ...
Phil

I need help from someone smart

Ok, I'm using QuickTime 7 Pro and am having some troubles. First question. Is there anything I can do if, when I try to export a video it says "Error -2048: This file is not a video". Next, sometimes it exports the videos extremely fast (like 2 seconds) and then I can't find the exported version and it doesn't work. It looks like nothing happened. Just looking for some help please.

this is NOT the videora suport website video stop soliciting help for it!!!!!!
find help here
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: http://www.videora.com/en-us/Converter/iPod/
If you have questions: http://www.videora.com/en-us/Converter/guides.html
If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
GFF

Videora is complicated need help Please???

hi i have movies that i downloaded and are mpg format and i want to know how to use videora i tried it but it seem confusing can u help step by step in anyway????

this is not the videora siupport forum. this software is not supported by apple you ned to go to their website for info and support. go to the links below.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: http://www.videora.com/en-us/Converter/iPod/
If you have questions: http://www.videora.com/en-us/Converter/guides.html
If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
GFF

Need help Reporting a post

Similar Messages

Maybe you are looking for