Need help suppressing some fields and tabs in documents

Hello everyone, I have just begun working as an SD consultant, and found the following challenge:
I was asked to figure out how to make some fields invisible and even take out an entire tab form the different sales documents.
Can anyone please guide me on how to accomplish this? I would be really grateful. If this post is not clear enough, please just let me know.
Thank you in advance,
Dan

Hi
By suppressing fields for particular transaction can be done as belwo
1. T code SHD0 and create the z variant for the t code that you want to supress the fields.
2.Once supress fields has been done u activate the same by going to standard variants
3.you can see the variant in the tcode by going to system --status
if you want to supress the whole tab then better to consult the ABAPER to do that
REgards
Damu

Similar Messages

Need help with parameter fields and report selection.

Hi all:
I hope some one can help me with the problem I am having with my parameter field and record selection.
First, can anyone explain to me why my parameter field CustStart, which is dynamic and is based on the field Customer in the table CustMaster. There are over 1800 records in the CustMaster table but the drop down list only shows maybe about half of them and there is no way to scroll down to the last customer record. What am I doing wrong?
Second, is there any way to base a parameter field on a formula field on my report? On my report I have created a field Cust that is the customer name and number joined together in one field. I would very much llike to use this formula in my record selection and in my parameter field. Can it be done?
All help is greatly appreciated
Thanks,
FatMan

Hi,
You can use the following for changin increasing the LOV.
Crystal Reports XI BusinessObjects Enterprise XI
For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
How can you modify the maximum number of values available in a dynamic parameter list?
Resolution
To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
CAUTION     The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
Crystal Reports XI Release 1
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
NOTE     The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
3.      After making changes to the registry, restart the affected service or application as required.
Crystal Reports XI Release 2
1.     Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
NOTE     Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
2.     Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE     The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3.     After making changes to the registry, restart the affected service or application as required.
I hope this helps you.
Regards,
Prashant

Need to show some fields in display mode

Hi, i need to show some fields in display mode for VA02 transaction code( is to change the values) for some particular users. so do we have any user exits for this requirement?
Please answer me. its very urgent.. thanks in advance.
ex: payment terms and freight terms.

you can try this for header level data
MV45AFZZ exit ""USEREXIT_FIELD_MODIFICATION"
code would be like below
   CASE screen-name.
To suppress Pricing total and Cuurency field at header
      WHEN 'VBAK-NETWR'.
*YOU CAN ADD YOUR CONDITION HERE WHICH IF SATISFY THEN *EXECUTE NEXT LINE OR SKIP IT
      screen-INPUT = 0.
      WHEN 'VBAK-WAERK'.
          screen-INPUT = 0
    ENDCASE.
but it depend upon what data AND in which tab you want to hide, like is it at header level or at item level or pricing (HEADER OR ITEM) data each of them have different exit to restrict data modification.
ENJOY SAP.

Need help in identifying fields of sd report creation

Hi Experts,
I need to create report in sd from manual report .The fileds in report are taken from Quickbooks.so inorder to create report in sap I need to identify fields in sap first.we dont had functional guy so i need help in identifying fields in sap for below mentioned report.
Report: invoice distribution report-service billing for all states.
Fields:customer number,customer name,city state,SAP Document number,Invoice date,period(month,year)invoice number,invoice type,currency,invoice amount in usd.
Please help me in suggesting tcodes or table names from where i can fetch these fields.
Thanking you in advance.
Regards,
narasimha.

Hi Experts,
Finally with all above suggestions i have chosen tables vbrk(billing document header data),kna1(customer header),vbrp.
1.I created view to find the output of report with conditions as follows:
tables:vbrk,kna1,vbrp
vbrk-vbeln(invoice number)
vbrk-fkart(invoice type)
vbrk-fkdat(invoice date)
vbrk-waerk(currency)
vbrk-netwr(netvalue)
vbrk-kunag(customer number)
kna1-name1(customer name)
kna1-ort01(customer city)
kna1-regio(customer state)
join condition:
kna1-mandt=vbrk-mandt
kna1-kunnr=vbrk-kunag.
when i execute the report i am getting same value for lot of times.
i am confused how to include sales document number.I hope sales document number and invoice are different.
2.i have also added vbrp-aubel and join condition as
vbrk-mandt = vbrp-mandt
vbrk-vbeln = vbrp-vbeln.
but when i execute the report i am getting lot of duplicated with same value and unknown invoice numbers.
please let me know where i went wrong.
is there any standard adhoc report so that i can manipulate it with above requirement.
vf05n is somewhat useful .is it possible to add customer details in this??
Thanks&Regards,
narasimha.

Acrobat form broke field into 2 separate fields and tabbed it wrong

I created a pdf form from a word doc. The form looks great with a couple of exceptions. One of the fields had four buttons. Adobe split that field into two fields and tabbed it wrong. It has tabbed it 4,4 and 5,5, instead of 4, 5, 6, 7, as it sees it as two different fields. I have tried to move the tabs up on the right (edit) side of the screen but they will not move. I don't know if this is because they are two fields now. I have tried everything I can think of and nothing works. I am new to this and scrambling to get this form turned around to my boss.
Any help would be greatly appreciated.
Deb

Thank you...I have been sitting here all morning working on it again and realized there was a way to do it manually that didn't require dragging and dropping the tabs....which it will not do. Yikes! Thank you for your response.
Now I have realized there is a problem with the word doc in another field. The spacing for a telephone number is wrong. Is there anyway to change it in the form or do I have to go back to the word doc, fix it, then re-import it? My desire to not do this is because I have to take it back to the original word doc and then when I re-import it, it obviously won't have all these changes I have just made.
Deb

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried. Can you help? thank

I need help, yesterday I installed and reinstalled the Yosemite system and take long to turn on my laptop, the bar takes to fill, and I'm worried.
Can you help? thank

revert back to Maverick that is what I had to finally do. This was the worst upgrade I have ever seen. Hopefully you have Time Machine backup and can revert back. It was pretty painless except for a few issues. I will wait until Apple gets their stuff together on this upgrade or may never will.

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

HT201210 i need to update to the latest version of itunes, but need to download some images and video first.....it is telling me that this will all be erased if i update, but it is not letting me do anything else.....what can i do??

i need to update to the latest version of itunes, but need to download some images and video first.....it is telling me that this will all be erased if i update, but it is not letting me do anything else.....what can i do??

You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right?

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

I need help importing navigation bars and rollover buttons from fireworks?

I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
Thanks

In my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O.

It keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing

it keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing.

Connect the iPod to your computer. Click on the iPod under Devices and iTunes. How large is the "other" category as shown in the colored bargraph? If larger than about 3/4 GB, restore the iPod. That large of "other" indicates corrupted files.

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Attaching search help to SCREEN FIELDS AND TABLE FIELDS

Hello experts,
Himanshu here.
Could you please explain how we can assign search Help to a screen field AND TABLE FIELDS in ABAP?
Please reply at the earliest,as we have some deliverables to be met
Thanks

Hi,
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
regards,
veeresh.

Need help with Zen Micro and Win

Hi,
I bought a Zen Micro 2 days ago and I can't get it to work with my Win XP machine.
I did what was told in the manual: install the software first then plug the player.
When I plug the player in I get the following message:
Found New Hardware:
Zen Micro
According to the manual, it should be detected and the drivers installed automatically.
But it dosen't. Instead I get the Wizard that try to find the drivers and it dosen't find them.
I let the battery get a full charge and I tried again. Same results.
I tried to update the firmware but since the player is not detected that didn't work.
I also tried to get the new MediaSource/Zen driver (ZENM_PCAPP_LB_4_00_8_PDE.exe) but that didn't fix my problem either.
I also tried to install the Creative Zen Micro Driver version .27.02 but it tell me that I can't install it because the user I tried to install it with is not an administrator. But this is not true since there is only one user on this machine and it's the administrator. First software that tell me this.
I'm using XP Home with SP2.
Thanks for the help.

SSR wrote:
The reason it won't install is because the drivers aren't installed.
I've seen a very few others with this strange error about administrati've pri'veleges, so I'm wondering if it's a Windows issue here. You could try downloading the drivers from to see if this is any different.
Try creating another administrator account and see if it will install from that, and try searching back (perhaps someone had found a solution). I think there's also a way of running a program with forced pri'veleges, perhaps Google can turn something up on that.
I remember one user needs to change some rights of the registry in order to install the software. It looks like under some cases, the login account does not have sufficient rights to write registry.

I need Help with Some CSS

I am in the process of making a new template for my site.
I can't really provide any code and here's why, I need help finding the code that I need to change. The new template is actually being designed here.
If you scroll over the home link you will find a sub-menu pops up, if you scroll over the menu items they get bigger and come 'at" you, if you hover over sub-2 and then hover over sub-3 you will notice there is a wild transition effect, I need to know how to get rid of those, it is a different CSS code from another template link to my site. I can't find out how, if somebody could please help me out it would be wonderful. Thank you a whole bunch in advance.

Your menu moves for a couple of reasons first, you have a border in the hover, which is going to move all of the text. You can get rid of the border in the hover or add a border of the same size/style in the active.
The second reason it appears you have some paddng in the hover that moves the text.
Find those and you can solve the issue.
Gary

Need help suppressing some fields and tabs in documents

Similar Messages

Maybe you are looking for