Need Help to identify the server hardware high level details

Hi All,
I have browsed  and i couldn't find the high level hard ware details.
Can any one help me to take the below hardware HIGH level details of the sun solaris server machine.
1.CPU processor name.
2.CPU processor speed.
3.Total RAM size
4.Overall hard disk space.
Thanks in Advance,
Senthur

Hello chandandascyr07. I don't think Linksys will be able to provide you the GPIO data since it's basically a proprietary company  information.

Similar Messages

  • Need help in identifying the reason my MacBook (late 2008) is slow?

    Hello to all...
    I have had my MacBook since I graduated high school and have never had a single problem with it. Here more recently (a year or so), it has been slowing down incredibly just trying to play videos or opening up more than one tab in my browser (safari or chrome). I also cannot seem to open more than one application at a time on my computer without the whole computer locking up.
    Here are my MacBook's specifications:
    MacBook (13-inch, Aluminum, Late 2008)
    Processor 2 GHz Intel Core 2 Duo
    Memory 2 GB 1067 MHz DDR3
    Startup Disk Macintosh HD
    Graphics NVIDIA GeForce 9400M 256 MB
    13.3-inch (1280x800)
    Macintosh HD
    102.44 GB free of 159.18 GB
    Your Mac contains 2 memory slots, each of which accepts
    a 1067 MHz DDR3 memory module.
    All memory slots are currently in use.
    I have included screenshots of my Activity Monitor window to further answer any questions I thought might arise.
    This MacBook has been through a lot with me, I have already used a program to wipe all "unneeded" programs from my MacBook. It seemed to get slightly faster, but I am sure this is partially a placebo effect. At this point I have looked into just getting a new computer, but this one was a gift and I still to this day have no where near enough money to buy a new MacBook. I am very one sided for Apple, as I have had several Windows and just didn't have as much luck with them. None have lasted near as long as this computer and I plan to keep it going for as long as it can.
    If you have ANY questions for me feel free to ask, I can try to answer to my best knowledge. I am not a big computer person, so any technical language would be greatly appreciated if it were slightly translated for me. I hope this is a well enough composed forum entry to answer without too much trouble. Thanks for any and all help.

    2GB of RAM isn't enough for Yosemite. Here are the options you have (doing all of them is really going to help, but doing 1 of them will help too):
    Add RAM if your Mac supports it
    Downgrade the OS back to mavericks or mountain lion (Note however that this is not supported by Apple)
    (if you do not want to do the latter) :  Run a clean install of Yosemite.
    Change the Drive for an SSD (a 128GB SSD costs about 100$).

  • I have used firefox for years. I watched the Getting Started tutorial. I need help in identifying the "Firefox button"

    If some of the features on the tutorial are not new, I didn't know about them and have never used them. The video moved along very quickly. I found it difficult to keep up. I couldn't find the "Firefox button" referred to in the instructions. It seems there a lot of great features available that I would like to use. I don't like Safari or IE. I much prefer Firefox, but I need clearer guidance. Thank you for any help you might offer.

    You have no Firefox Menu button on a Mac.<br />
    The Firefox button is only available on Windows and Linux and shows when the Menu bar is hidden.<br />
    On Mac the menu bar is maintained by the Mac OS and not by Firefox and the Menu bar is always visible and can't be hidden, so there is no need for such a menu button.<br />

  • Need help to identify the GPIO pins of WRT160NL router

    Hi,
    Please share the following GPIOs location in the hardware board(image).
      - GPIO0,
      - GPIO6 (LED_WLAN),
      - GPIO8 (LED_WPS_BLUE),
      - GPIO9 (LED_WPS_AMBER),
      - GPIO13 (UART_RX),
      - GPIO14 (LED_PWR)

    Hello chandandascyr07. I don't think Linksys will be able to provide you the GPIO data since it's basically a proprietary company  information.

  • HT1918 I have Unknown Itunes charges on my credit card.  I need help to identify the purchases. It does not show in my Itunes purchase history but only one my credit card statement.

    I have some unknown Itunes charges on my credit card that I have been busting my brains on getting an answer.  I HATE not getting to talk to a real person!!!!  Same amount Charges show three consecutive days but does NOT show on my itunes purchase history. Suggestions greatly appreciated. A hammer to smash the computer would help too.

    If they don't show on your purchase history on your account then have you have you added or changed your credit card details on your account - when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) ? If not then you could contact iTunes Support via this page and see if they can see what they are for : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I Need Help to Access The Source Code From A Form to Know the Calculation Formula

    Hi,
    I Need Help to Access The Source Code From A Form to Know the Calculation Formula. The application is a windows form application that is linked to SQL Server 2008. In one of the application forms it generates an invoice and does some calculations. I just
    need to know where behind that form is the code that's doing the calculations to generate the invoice, I just need to get into the formula that's doing these calculations.
    Thank you so much.

    Hi, 
    Thanks for the reply. This is a view and [AmountDue] is supposed to be [CurrentDueAmount] + [PastDueAmount] - [PaidAmount]. The view is not calculating [PaidAmount] right . Below is the complete code of the view. Do you see anything wrong in the code ?
    Thanks. 
    SELECT     [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
    [iff].[FacilityFeeID], [LoanID] = NULL, [isi].[PortfolioID], [isi].[Portfolio], 
                          [PaymentType] = [isis_fee].[SectionType], [Name]
    = [iff].[Name], [ReceivedAmount], [dates].[CurrentDueAmount], 
                          [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
    0) > 0 THEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0) 
                          WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply reset to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN 0 ELSE [pastdue].[PastDueFeeAmount]
    + ISNULL([ReceivedAmount], 0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [pastdue].[PastDueFeeAmount] < 0 THEN 0 ELSE
    [pastdue].[PastDueFeeAmount] END, [PaidAmount] = CASE WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN - ([pastdue].[PastDueFeeAmount]
    + ISNULL([ReceivedAmount], 0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [pastdue].[PastDueFeeAmount] < 0 THEN - [pastdue].[PastDueFeeAmount]
    ELSE 0 END, [AmountDue] = [unpaid].[UnpaidFeeAmount], [ID] = [iff].[FacilityFeeID]
    FROM         [dbo].[INV_SubInvoice] isi JOIN
                          [dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
    = [ii].[ID] JOIN
                          [dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
    JOIN
                          [dbo].[INV_FacilityFee] iff ON [if].[ID] = [iff].[INV_FacilityID]
    JOIN
                              (SELECT     [sis_fee].[ID],
    [sis_fee].[SectionTypeCode], [SectionType] = [st_fee].[Name], [sis_fee].[INV_FacilityFeeID]
                                FROM      
       [dbo].[INV_SubInvoiceSection] sis_fee JOIN
                   [dbo].[INV_SectionType] st_fee ON [sis_fee].[SectionTypeCode] = [st_fee].[Code]
                                WHERE      [INV_FacilityFeeID]
    IS NOT NULL AND [StatusCode] = 'BILL') isis_fee ON [iff].[ID] = [isis_fee].[INV_FacilityFeeID] JOIN
                              (SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                   [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedFeeAmount]), 
                   [ReceivedAmount] = SUM([iffa].[ReceivedFeeAmount])
                                FROM      
       [dbo].[INV_FacilityFeeAccrual] iffa
                                GROUP BY [iffa].[SectionID])
    dates ON [isis_fee].[ID] = [dates].[SectionID] LEFT JOIN
                              (SELECT     *
                                FROM      
       [dbo].[INV_FacilityFeeAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND 
                          [dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
    LEFT JOIN
                              (SELECT     [SectionID],
    [PastDueFeeAmount] = SUM([PastDueFeeAmount])
                                FROM      
       [dbo].[INV_FacilityFeeAccrual]
                                GROUP BY [SectionID]) pastdue
    ON [dates].[SectionID] = [pastdue].[SectionID]
    UNION
    SELECT     [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
    [FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio], 
                          [PaymentType] = [isis_loan].[SectionType], [Name]
    = [il].[Name], [ReceivedAmount], [CurrentDueAmount], [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount], 
                          0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount],
    0) WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
    0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
    END, 
                          [PaidAmount] = CASE WHEN [isis_loan].[SectionTypeCode]
    = 'LOAN_PRIN' THEN 0 ELSE CASE WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
    0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN - [PastDueAmount]
    ELSE 0 END END, 
                          [AmountDue] = CASE WHEN [isis_loan].[SectionTypeCode]
    = 'LOAN_PRIN' THEN [CurrentDueAmount] ELSE [unpaid].[AmountDue] END, [ID] = [il].[LoanID]
    FROM         [dbo].[INV_SubInvoice] isi JOIN
                          [dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
    = [ii].[ID] JOIN
                          [dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
    JOIN
                          [dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
    JOIN
                              (SELECT     [sis_loan].[ID],
    [sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
                                FROM      
       [dbo].[INV_SubInvoiceSection] sis_loan JOIN
                   [dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
                                WHERE      [INV_LoanID]
    IS NOT NULL AND [StatusCode] = 'BILL') isis_loan ON [il].[ID] = [isis_loan].[INV_LoanID] JOIN
                              (SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                   [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[ExpectedPrincipalAmount]), 
                   [ReceivedAmount] = SUM([ReceivedPrincipalAmount])
                                FROM      
       [dbo].[INV_LoanPrincipalAmortization] iffa
                                GROUP BY [iffa].[SectionID]
                                UNION
                                SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                  [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]), 
                  [ReceivedAmount] = SUM([ReceivedInterestAmount])
                                FROM      
      [dbo].[INV_LoanCashInterestAccrual] iffa
                                GROUP BY [iffa].[SectionID]
                                UNION
                                SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                  [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]), 
                  [ReceivedAmount] = SUM([ReceivedInterestAmount])
                                FROM      
      [dbo].[INV_LoanPIKInterestAccrual] iffa
                                GROUP BY [iffa].[SectionID])
    dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
                              (SELECT     [AmountDue]
    = [UnpaidPrincipalAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
       [dbo].[INV_LoanPrincipalAmortization]
                                UNION
                                SELECT     [AmountDue]
    = [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
      [dbo].[INV_LoanCashInterestAccrual]
                                UNION
                                SELECT     [AmountDue]
    = [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
      [dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND 
                          [dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
    LEFT JOIN
                              (SELECT     [PastDueAmount]
    = SUM([PastDuePrincipalAmount]), [SectionID]
                                FROM      
       [dbo].[INV_LoanPrincipalAmortization]
                                GROUP BY [SectionID]
                                UNION
                                SELECT     [PastDueAmount]
    = SUM([PastDueInterestAmount]), [SectionID]
                                FROM      
      [dbo].[INV_LoanCashInterestAccrual]
                                GROUP BY [SectionID]
                                UNION
                                SELECT     [PastDueAmount]
    = SUM([PastDueInterestAmount]), [SectionID]
                                FROM      
      [dbo].[INV_LoanPIKInterestAccrual]
                                GROUP BY [SectionID]) pastdue
    ON [dates].[SectionID] = [pastdue].[SectionID]
    UNION
    SELECT     [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
    [FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio], 
                          [PaymentType] = 'PIK Interest Applied', [Name]
    = [il].[Name], [ReceivedAmount], [CurrentDueAmount] = - [dates].[CurrentDueAmount], 
                          [PastDueAmount] = - CASE WHEN ISNULL([ReceivedAmount],
    0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
    0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
    END, [PaidAmount] = - CASE WHEN ISNULL([ReceivedAmount], 0) 
                          < 0 THEN /* We bring past due to zero and
    apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) 
                          < 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
    0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND 
                          [PastDueAmount] < 0 THEN - [PastDueAmount]
    ELSE 0 END, [AmountDue] = - [AmountDue], [ID] = [il].[LoanID]
    FROM         [dbo].[INV_SubInvoice] isi JOIN
                          [dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
    = [ii].[ID] JOIN
                          [dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
    JOIN
                          [dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
    JOIN
                              (SELECT     [sis_loan].[ID],
    [sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
                                FROM      
       [dbo].[INV_SubInvoiceSection] sis_loan JOIN
                   [dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
                                WHERE      [INV_LoanID]
    IS NOT NULL AND [StatusCode] = 'BILL' AND [sis_loan].[SectionTypeCode] = 'LOAN_INT_PIK') isis_loan ON 
                          [il].[ID] = [isis_loan].[INV_LoanID] JOIN
                              (SELECT     [iffa].[SectionID],
    [AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]), 
                   [AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]), 
                   [ReceivedAmount] = SUM([ReceivedInterestAmount])
                                FROM      
       [dbo].[INV_LoanPIKInterestAccrual] iffa
                                GROUP BY [iffa].[SectionID])
    dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
                              (SELECT     [AmountDue]
    = [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
                                FROM      
       [dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND 
                          [dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
    LEFT JOIN
                              (SELECT     [PastDueAmount]
    = SUM([PastDueInterestAmount]), [SectionID]
                                FROM      
       [dbo].[INV_LoanPIKInterestAccrual]
                                GROUP BY [SectionID]) pastdue
    ON [dates].[SectionID] = [pastdue].[SectionID]

  • I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5.  It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

    I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5.  It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

    You will need to get the required info to create/access the account with an email client from your school.
    Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

  • Need help setting up Mac server for dental practice?

    My dentist is running windows server 2003 and wants to do a total upgrade to Apple server components. The issue is that the software his office uses for patient records is not Mac compatible. He is really set on the Mac environment and is curious if he can run the software on a Mac running Windows and I guess my question is the same. I don't have the specifics on the software he needs to run but from what he says it is fairly low overhead and handles some large jpeg files but mostly small data files.
    I am curios how difficult the task of migrating all the info into the Mac environment will be? He is also curious about remote access from home or wherever he needs to get to his info and am curious if a VPN or other method is best.
    Thanks

    Ok, I am a sucker. I will bite.
    The answer is yes. OS X and OS X Server can run Windows in a virtual machine using Parallels of VMWare (or virtual box, or Crossover, or... you get my point). This will allow you to run Mac hardware with Mac software but at the same time run Windows and the required applications.
    But, there is a cost penalty here. First, there is the cost of the hardware. Not a big deal, Apple is competitive in price and the server hardware is very nice. Then there is the cost of Windows and the VM software. This is your tax. You have to add these costs on top of what you are already buying and then there is the hidden cost of the additional support. You are now supporting two operating systems, OS X and Windows. And just because Window is running on a Mac does not make it immune to viruses/spyware/trojans/etc.
    If this guy really wants to go the Mac route, then go all Mac. Check out http://www.macpractice.com/mp/dds/ or http://www.macdentpro.com/index.php or do a search. There are a number of products that can handle dental practices on Macs, including the radiology aspect. Google is your friend.
    As for remote access, OS X Server has a VPN built in that works well. That is not a problem. Or you can get a dedicated VPN appliance to handle security. Once bit of advice. Make sure you implement a good backup solution. Don't be foolish and think that TIme Machine alone is going to save you. This is medical records. Do not mess with them. Spend the dollars to properly harden the environment and ensure record retention policies are met.
    Hope this helps

  • Request for help in tuning the server which is running opmn process.

    Hi Folks,
    I request for an help in tuning the server which is running oracle app server opmn process , It is chewing arround 40% of the CPU resource,and our sysadmin is back of me to resolve this issues.
    any feedback on this is highly appriciated...
    Thanks in advance

    Re: How to Achieve Performance Tuning
    I hope you may find answers here..
    Sharma

  • Need help in identifying fields of sd report creation

    Hi Experts,
    I need to create report in sd from manual report .The fileds in report are taken from Quickbooks.so inorder to create report in sap I need to identify fields  in sap first.we dont had functional guy so i need help in identifying fields in sap for below mentioned report.
    Report: invoice distribution report-service billing for all states.
    Fields:customer number,customer name,city state,SAP Document number,Invoice date,period(month,year)invoice number,invoice type,currency,invoice amount in usd.
    Please help me in suggesting tcodes or table names from where i can fetch these fields.
    Thanking you in advance.
    Regards,
    narasimha.

    Hi Experts,
    Finally with all above suggestions i have chosen tables vbrk(billing document header data),kna1(customer header),vbrp.
    1.I created view to find the output of report with conditions as follows:
    tables:vbrk,kna1,vbrp
    vbrk-vbeln(invoice number)
    vbrk-fkart(invoice type)
    vbrk-fkdat(invoice date)
    vbrk-waerk(currency)
    vbrk-netwr(netvalue)
    vbrk-kunag(customer number)
    kna1-name1(customer name)
    kna1-ort01(customer city)
    kna1-regio(customer state)
    join condition:
    kna1-mandt=vbrk-mandt
    kna1-kunnr=vbrk-kunag.
    when i execute the report i am getting same value for lot of times.
    i am confused how to include sales document number.I hope sales document number and invoice are different.
    2.i have also added vbrp-aubel and join condition as
    vbrk-mandt = vbrp-mandt
    vbrk-vbeln = vbrp-vbeln.
    but when i execute the report i am getting lot of duplicated with same value and unknown invoice numbers.
    please let me know where i went wrong.
    is  there any standard adhoc report so that i can manipulate it with above requirement.
    vf05n is somewhat useful .is it possible to add  customer details in this??
    Thanks&Regards,
    narasimha.

  • I need help in understanding the customization of Landscape in R/3.

    I need help in understanding the customization of Landscape in R/3. Setup of SAP Landscape from an SAP SD point of view. Being as SAP SD consultant what would be my role in customizing the Landscape server. Help needed. Thx

    Hi,
    In a standard SAP project implementation, the 3 standard transport procedures are:
    Development System (DEV) --> QA System (QAS) --> Production System (PRD)
    In the above structure, the Training Client (TRN) could be made from the copy of PRD (after when real-time master data has been available) or from QA system (where configuration has been tested in DEV client, and the master data is uploaded manually for training purposes)
    Sandbox (standalone): This can be refreshed with Golden Client to reflect the latest configuration performed to facilitate the development/testing purposes.
    -Development (DEV): Where all system configurations and development activities are carried out.
    -Quality Assurance (QAS): Where functional testing is carried out. The System Integration Testing (carried out by the -Development Team) and the User Acceptance Testing (carried out by XXX appointed personnel) is carried out in this server.
    -Training (TRN): End Users are trained on this server.
    -Production (PRD): After the System is commissioned all data entry and administrative functions will be carried out in this server.
    This is by far the standard landscape architecture that is adopted and practiced in most implementations.
    Hope the above helps.
    Thanks.

  • I need help in making the programe which updates our code into client machi

    I need help in making the programme which updates our code into client machine from the server.
    As yahoo messanger does if there is any updated version of yahoo messanger.
    It asks when we login into it do you want to update new version of yahoo messanger
    It automatically updates it
    Need Help??

    Sounds to me like you need Java Web Start.

  • The server hardware configuration of IndesignServer ?

    I'm going to use IndesignServer within the enterprise network to establish a platform for online editing, there are about 200 users, the server hardware configuration, please?

    There are a lot of questions here, but I'll throw in my 2 cents on a couple of them.
    How many databases are on your database machine? The correct answer here is "1".
    What is the current load on the system in terms of percent CPU / IO? If it's 99%, then sure, APEX apps will probably push it over the edge.
    APEX page view times are typically measured in tenths and hundredths of a second. From my experience, OLTP APEX page views are usually in the range of 0.2 to 0.4 seconds per page view as indicated by the performance reports or simply putting a page in debug mode. So, if your avg page view time were say, 0.5 seconds and you have 2 cores, you can handle about 4 page views per second (240 / minute, 14,400 /hour, 115,200 / day). With that said, you'll need to benchmark your own page view times on your own system. If you write slow SQL, say 2 seconds per page view, you're now down to 14,400 per day! So, it's up to you.
    Are you currently reviewing ADDM or StatsPack reports on a regular basis? I STRONGLY suggest you run a few ADDM reports for 15 minute intervals during busy times of the day BEFORE you put APEX in production. Then you can run the same reports AFTER APEX is in production and review the impact on your database.
    As far as hardware, you don't indicate the platform or OS. 2 cores and 4 GB of RAM seems pretty low for any database these days (my laptop has the same specs), but will probably do the trick.
    Tyler Muth
    http://tylermuth.wordpress.com

  • I need help understanding how the Apple components integrate to create a system across all my devices?

    I need help understanding how the Apple components connect to create a whole system across all my devices?
    Is there a resource that describes current system and associated functionality?
    For example:
    Buy A, B, C to achieve "X" 
    You will need:
    an internet provider which supports <specs>
    add D to achieve "Y"
    You will need:
    an internet provider which supports <specs>
    add "E" to achieve "Z"
    You will need:
    an internet provider which supports <specs>
    For example, I am looking at the Gen 6 Airport extreme.  For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice?  Do I need the internet provider's modem or does the Airport extreme replace that?  And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why?  Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel  or sit on the couch in my PJs?
    If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
    I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy. 
    A "System Configuration App" would be a really great sales tool--Just saying.

    I have no idea what "fully optimized" means.
    No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
    Any Mac computer or iPad will allow you to surf the web.
    What business software?
    Time Capsule is a good option for back ups.
    Update what across all devices?
    For accessing documents from all devices, a service like Dropbox is your best bet.
    I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
    Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
    Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
    The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
    Best of luck.

  • I need help to remove the wrong email on my Iphone.  I can't down load app because my apple ID doese not match with the wrong email please help

    I need help to remove the wrong email on my Iphone.  the represnter who set up my phone put in the wrong email, and now I can't down loand apps on my phone because the apple ID does not match

    So sign out of the Apple ID under Settings > iTunes & App Store, then sign in with your own.

Maybe you are looking for