Need help using LabVIEW 7.1 and data socket to transfer images

I need help transferring images across a company network using: LV 7.1, IMAQ 3.0 and a PCI 1407 image aquisition card. I am trying to use datasocket to transfer video image across a company network. I have attached sample vis. Thanks in advance for your help.
I. Cyr
Attachments:
Vibration Chamber Vision_Cyr.llb ‏129 KB

Hello –
Something that you need to consider is the fact that when you are sending an image over Data Socket, it is not really the image what is being transferred but a pointer to the image. Please take a look into this Knowledgebase.
Also, you might find this Example Program useful.
Hope this helps.
S Vences
Applications Engineer
National Instruments

Similar Messages

Hello everyone, Need help using POI to access xslx data

Hi,
i am trying to make a simple program in OATS which will fetch data and display the output from a xlsx file.
The file name is DriverAdapter and its java script is as below. I have written a java class called ActionDriver whch performs the actions for me using the POI api. But when i instantiate ActionDriver,
it is throwing the exception referrring to POI api classes cannot be found. ClassNotFoundException : org.apache.poi.openxml4j.exceptions.InvalidOperationException;
Can someone help me out to find how can i run this through DriverAdapter. When i tried to run ActionDriver from the same project as a java application by replacing my method with main, it is running fine.
import oracle.oats.scripting.modules.basic.api.*;
import oracle.oats.scripting.modules.browser.api.*;
import oracle.oats.scripting.modules.functionalTest.api.*;
import oracle.oats.scripting.modules.utilities.api.*;
import oracle.oats.scripting.modules.utilities.api.sql.*;
import oracle.oats.scripting.modules.utilities.api.xml.*;
import oracle.oats.scripting.modules.utilities.api.file.*;
import oracle.oats.scripting.modules.webdom.api.*;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Iterator;
import ats.test.ActionDriver;
public class script extends IteratingVUserScript {
     @ScriptService oracle.oats.scripting.modules.utilities.api.UtilitiesService utilities;
     @ScriptService oracle.oats.scripting.modules.browser.api.BrowserService browser;
     @ScriptService oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService ft;
     @ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
     @ScriptService oracle.oats.scripting.modules.formsFT.api.FormsService forms;
     private static String myData="C:/data.xlsx";
     public void initialize() throws Exception {
          //initializing ActionDriver
          dAction = new ActionDriver();
     * Add code to be executed each iteration for this virtual user.
     public void run() throws Exception{
          dAction.startAction(myData);
     public void finish() throws Exception {
Below is the code for my ActionDriver
package ats.test;
//package sni.test.ats;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Iterator;
import org.apache.poi.openxml4j.exceptions.InvalidOperationException;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.xssf.usermodel.XSSFCell;
import org.apache.poi.xssf.usermodel.XSSFRow;
import org.apache.poi.xssf.usermodel.XSSFSheet;
import org.apache.poi.xssf.usermodel.XSSFWorkbook;
public class ActionDriver
     public static void main (String ar[])
     //public void startAction(String myData)
          boolean b = true;
          try
               XSSFWorkbook wb = new XSSFWorkbook("c:/data.xlsx");
               //XSSFWorkbook wb = new XSSFWorkbook(myData);
               XSSFSheet sheet = wb.getSheet(DataConstants.businessFlow);
               ArrayList businessRule = new ArrayList();
Iterator rows = sheet.rowIterator();
String myScripts[];
while (rows.hasNext())
XSSFRow row = (XSSFRow) rows.next();
row = (XSSFRow) rows.next();
Iterator cells = row.cellIterator();
while (cells.hasNext())
     XSSFCell cell = (XSSFCell) cells.next();
     if (cell.getCellType()==XSSFCell.CELL_TYPE_NUMERIC )
          businessRule.add(cell.getNumericCellValue());
     else
          businessRule.add(cell.getStringCellValue());
performAction(businessRule);
          catch(Exception fife)
               System.out.println("Exception Occured"+fife);
               b=false;
          /*catch(IOException ie)
               System.out.println("Error Handling Input File"+ie);
     public static void performAction(ArrayList businessRules)
          Object[] businessRuleArray = businessRules.toArray();
          boolean b=true;
          for (int i=1; i<businessRuleArray.length;i++)
               if(b)
                    String rule = businessRuleArray.toString();
                    System.out.println(rule);
               else
               break;

[this |http://blogs.oracle.com/aamat/2009/06/load_testing_your_oracle_datab_1.html] Hi
Is that class located in the same folder as the script.java class?
If note you will need to add it on the manifest, you can look at this blogs for instructions on how to edit the manifest file.
Regards
Alex

HT4356 Need help using my air printer and iphone 5s...it prints but the page is SMALL.

When using my air printer with my iphone 5s the pdf comes out very small. I've tried numerous times to print different pdf files (from attachments in email) and it won't print an 8 x 11 page, only 3 x 5 size. I finally tried again by opening it with adobe and it printed correctly. Is there a way to get it to work without using adobe?

The paper size would normally be coming from the application rather than some setting in the driver. I've never seen the Generic PCL driver send a request for B5, but then I do use A4 rather than Letter and I don't have a PCL printer at home to check this. But I do think it has more to do with the application/document being printed.
For the application that you are using, is there are a separate Page Setup menu?
If the page and document is correctly set to Letter, you mention a wireless secure. If you mean something more than a wireless network that requires a password to access it, such as using https to connect to a remote server, then it could be settings for the shared printer queue. Although these shared printers are usually just an access point (throughport) for the remote client. Still, if you do have some additional network server for this secure wireless network, then this could be contributing to the incorrect paper size call.

Re: Beginner needs help using a array of class objects, and quick

Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ? In html, I assume. How did you generate the html code of your three classes ? By help of your IDE ? NetBeans ? References ?
I already posted my question with six source code classes ... in text mode --> Awful : See "Polymorphism did you say ?"
Is there a way to discard and replace a post (with html source code) in the Sun forum ?
Thanks for your help.
Chavada

chavada wrote:
Dear Cynthiaw,
I just read your Beginner needs help using a array of class objects, and quick of Dec 7, 2006 9:25 PM . I really like your nice example.You think she's still around almost a year later?
I also want to put a question on the forum and display the source code of my classe in a pretty way as you did : with colors, indentation, ... But how ?Just use [code] and [/code] around it, or use the CODE button
[code]
public class Foo() {
* This is the bar method
public void bar() {
// do stuff
}[/code]

HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>

You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend.

I need helping using iAds in my application.

I need helping using iAds in my application. I currently am not using any storyboards. I am using Sprite builder for my UI.
I attatched an image ot show all the different file name I have.
Everyone is being used & they all work fully.
The "iAdViewController.h & .m" files are just example codes I looked up and was messing with so that my iAd can work.

I wouldn't even be able to use the Mathscript node in an executable?
What I am trying to do is make a user configurable data stream.
They tell me how many bytes are in the stream and what parameters they
want to be put in to it. Currently I have to make vi's that are
called dynamicaly to make the parameters.   Then recompile
the code and send it to them. This is somewhat of how the config
file is set up so I know how to make the data.
Data_Type foo
Bytes 30
parameter_name
function
   byte#          format
sync
foo_sync
29               int
time
foo_time
1,2,3,4    double
If I can't use MathScript to allow the user to make there own functions
is there another way that I might be able to do this so I do not have
to recompile the code atleast? Were I might just be able to make
the new function and send that to them.
Any Idea would be great.

Help Using Labview to control Kikusui power supply with a PIA4850 controller

HI I need some help using Labview to control 4 Kikusui power supplies. We have a PIA4850 Kikusui power supply controller. I can use the visa test panel and see the PIA4850 but can see any of the power supplies. I have very limited use of Labview and only wrote a couple programs using GPIB. The PIA4850 is a USB controller and can control up to 32 PS. I can get it to work with a Excel demo software that came with the controllers so I know that it is working. Any help will be appreciated. I am using LabView 8.2 and have updated to the Ni-DAQ 9.0. I have a program that I need to incorporate the PIA4850 into once I figure out how to operate it. Thanks in advance.

HI and thanks for the help. I did get one power supply to work but have another problem. I need to control 4 power supplies at the same time and can only operate the one that is addressed N5!C1. If I set the other to N6!C1 and so on I get an error stating
“Error -1074135008 occurred at ki4800_2 Configure Voltage Level.vi Possible reason(s):IVI Error in the method "get_Item" in the component "Kikusui4800". E_IVI_UNKNOWN_CHANNEL_NAME: Unknown channel name (N6!C1)”
I am assuming that I should be able to change the node number and that will change the supply that I need to use. Everything works great if I use N5!C1 I can change any of the supplies to address 5 and can control it with no problem. I can even have multiple supplies with the same address N5!C1 (don’t think I should do that) and change them all at once. I need independent control of each supply.
I am in a pinch here and need to figure it out but could use some help. Any ideas will be greatly appreciated.
Thanks
GBlair
Attachments:
KIKUSUI PS.llb ‏179 KB
Kikusui Ps Controller.JPG ‏63 KB

Need help with representing 2 bits of data in a column

I Need help representing only 2 bits of data in a column in order to save space.
Is that possible?

CommitMan wrote:
I Need help representing only 2 bits of data in a column in order to save space.
Is that possible?Yes - using Assembler....
If you need to count bits to save space, then you must be on 70's, or early 80's, hardware. So using Assembler should not be a problem. Let me guess.. a 8051 microcontroller from the 1980?
Here's what the 8051 code and memory optimisation manual says:
>
The simplest and best way to get dramatic improvements
in efficiency is to look for all variables that will have only
binary values (0 and not 0), and define them as type 'bit‘:
bit myVar;With bit variables, the full set of 8051 bit-level assembler
instructions can be used to generate very fast and
compact code. For example, the following C code:
myVar = ~myVar;
if (!myVar)
}Generates only two lines of assembler:
B200 CPL myVar
200006 JB myvar,?C0002This example uses only 5 flash bytes and 8 CPU cycles.
When you use bit variables, you can implement a
nontrivial line of C code with just one assembler
instruction.
>
<i>PS. Yes, the above is really from a manual for a real 80s microcontroller. And yes, I'm poking fun at your question as saving bits were a problem in the 80s and prior. It should not be a problem in the 21st century information system and database.</i>

Need help using dbms_scheduler to submit an immediate job on the database

Hi. I need help using dbms_scheduler to submit an immediate job on the database. Essentially I want to issue a one-time call to an Oracle Stored Procedure - this procedure will then send an email. I've never used dbms_scheduler before, but here's what I have so far.
So my Program is a stored database procedure named 'TTMS.dropperVacationConflict_Notify', but my problem is that I need to pass 3 parameter values to this job each time I run it. This is what I can't figure out. The procedure expects an 'Id' as number(5), begin_dt as a date, and end_dt as a date.
How do I pass these values when I run my job? Can anyone help?
begin
    dbms_scheduler.create_program(program_name=> 'PROG_DROPVACCONFLICTS_NOTIFY',
     program_type=> 'STORED_PROCEDURE',
     program_action=> 'TTMS.dropperVacationConflict_Notify',
     number_of_arguments => 3,
     enabled=>true,
     comments=> 'Procedure to notify PCM of a Dropper Vacation Conflict. Pass in Dropper Id, Begin_dt, and End_dt');
end;
begin
    dbms_scheduler.create_schedule
    (schedule_name=> 'INTERVAL_EVERY5_MINUTES',
     start_date=> trunc(sysdate)+18/24,
     repeat_interval => 'freq=MINUTELY;interval=5',
     end_date => null
     comments=> 'Runtime: Every day all 5 minutes, forever'
end;
begin
    dbms_scheduler.create_job
    (job_name => 'JOB_DROPVACCONFLICTS_NOTIFY',
     program_name => 'PROG_DROPVACCONFLICTS_NOTIFY',
     schedule_name => 'INTERVAL_EVERY5_MINUTES',
     enabled => true,
     auto_drop => true,
     comments => 'Job to notify PCM of Dropper Vacation Conflicts'
end;
/And I use this to execute the job as needed...
begin
    dbms_scheduler.run_job('JOB_DROPVACCONFLICTS_NOTIFY',true);
end;
/

Duplicate Post
Need help using dbms_scheduler to submit an immediate job on the database

LabView 6.0 and data bank

Hi;
Its possible i use labview conected with a data bank like mysql for example ?
Im needing implement a data bank for future consult ....

Yes it is. Here is a link, LabSQL which works with LabVIEW 6.0
System
requirements :
LabVIEW
6.0 or higher, running on Windows. In the future, we hope to add
JDBC modules
so that LabSQL can run on other platforms
The
database you are connecting to should have an ODBC driver (almost
all databases do: Access, SQL Server, Oracle, Pervasive, etc.)
MDAC
2.6 installed. You may already have MDAC installed, but if you
don't, download
it from Microsoft here.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible

Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app

I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone. It works well for me for the past couple of years.
As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think.

Need help with my iPhone 5 and my Macbook Pro.

Need help with my iPhone 5 and my Macbook Pro. I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5. Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac. Can anyone help me with that ??....
iPhone 5, iOS 6.0.1

You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

TS4268 I need help getting my face time and imessage to work.

I need help getting my face time and imessage to work. It is saying wating for activation. I just got my iphone 5 2 days ago. I have reset it from the phone and from itunes on the computer, made sure I'm attached to wifi.

The 3 basic troubleshooting steps are these in order: 1. Restart your iphone 2. Reset your settings/iphone 3. Restore your iphone. Since your iphone is only a couple of days old, you should backup your device before restoring. If you don't have anything on your iphone that you care to lose, then simply restoring without a backup is fine. A quick reset of pressing the sleep/wake button (top of iphone) and your home button simultaneously and holding it until the silver Apple logo appears.

What application do I need to use to download PS and LR? [was:?]

What application do I need to use to download PS and LR

i think you are reffering to 'adobe application manager':
Adobe - Adobe Application Manager : For Windows : Adobe ...

How can I do to communicate to parallel port using labview 5.0 and NT ?

I am trying to write and read from parallel port using Labview 5.0. It does not work with NT.
How can I do to communicate to parallel port using labview 5.0 and NT ?
Thank you in advance.
Regards,

If you are trying to use In/Out port functions that come with LabVIEW they will not work with NT. I think the AccessHW file at the following link will fix that problem:
http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/49664743ded6f1da862564bc004e3a7f?OpenDocument
Try also this link:
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/0989d3d9dafae64e8625680400679736?OpenDocument
and do some searchs at NI.com for parallel port, you should find some more usefull info.
Good luck
Brian

Need help using LabVIEW 7.1 and data socket to transfer images

Similar Messages

Maybe you are looking for