Need help with a bookmarkable/Anonymous page, Got wierd error.

Thanks in advance for your help. I have created a custom password reset page follow Kalimuthu Vellaichamy's instruction, the link for the instruction is the following if that helps:
http://mukx.blogspot.com/2008/07/creation-of-anonymous-page-introduction.html .
I get an error the first time I access the page, but if I refresh the page I can access the page successfully after then. If I clear browser's history and try to access the page, I get error again. Here is the error message:
You have encountered an unexpected error. Please contact the System Administrator for assistance.
Thank you for help
-Bill

Kali,
I tried again this morning, Here is what I did.
I made sure I did not logged in to the application and made sure I only opened one brower window. Then I tried to open the page. I was not able to log in the first time I opened the page, I got the error I mentioned in the first post, and on the right top corner of the error page it has a logout link.
Then I clicked refresh button and I could access the page. I could tell I did not logged in at that time because there is no logout link on the right top corner, there were only links for "home" and "preferences".
Then I closed the browser and reopened the browser, and tried to open the page, at this time I got error again, then I click refresh button and I could open the page again.
Then I kept this browser window open and I opened another browser window and just went to blank page. Then I close the first browser window(the one with the bookmarkable page) and opened a new window (during this time the blank page was still open) and went to the bookmarkable page again. And this time it worked.
I think there is something like cookie changed when I got the error so I could open the page after click refresh. But dont know what it is.
Thanks
-Bill

Similar Messages

Need help with an "exit door" page

My office has a page on our webserver that serves as an "exit door". It basically tells you when you're leaving our site (they do this because it's a gov't site, and thus rquired) and you have to click on a link to confirm that you want to leave.
The way it works is that when you code a page with a link that needs an exit door, you prepend the url with "exit.cfm?link=" and then the URL. It works adequately on simple URLS that pass no parameters. Where it has a problem is when a URL has GET arguments like ?page=23&item=43.
The original coder used URL.link, which of course only captures the first GET argument. As a work-around, we're required to edit the target URLS being passed to the exit door and replace things like & and # with [amp], [pound], etc. Needless to say, this gets rather tedious, so I decided to have a look at that old exit door page to see what I could do with it.
After playing around a bit, I achieved a reasonable level of success by using the following:
#xmlformat(ListDeleteAt(CGI.QUERY_STRING,1,"="))#
This gives me a properly encoded full URL to use as a link on the exit door page. But there's one problem. If there's a link that contains an anchor (like foo.com#section1) it doesn't capture the anchor. The # and what's after it isn't being passed.
I'm trying to figure out how to make this work. Has anyone else here had to make an exit door, and if so, how did you do yours?

Thanks mack. I'm starting to think the answer to this is "it can't be done". Which is probably why my predecessor was replacing &s with [amp]s.
What led me to try to change this was that I was trying to build a regex for Dreamweaver that changed things like & and # to [amp] and [pound], but only when the URL began with the exit door page URL. I was only able to get my regex to replace one occurance of an item per pass, which sort of defeated its purpose. So I decided to change the exit door page instead.
Maybe I'll go back to trying to get the regex to work.
Ian, thanks for your help as well.

Need help with fitting text onto page

I'm working on a website where I have a template with an
editable region where I put all the main text for each page. I
originally had it set up for scroll bars so when the text inside
the cell of the editable region didn't fit, scroll bars would
appear (I used overflow in the CSS). Now the client tells me they
don't want scroll bars but want the text area to dynamically expand
vertically to fit whatever amount of text. The problem is, when I
try to put in a lot of text in the editable region, it breaks the
table and the nav bar on the side gets all messed up. How can I
have the text inside of a cell dynamically expand without affecting
the rest of the table?
Any help is greatly greatly appreciated, thanks in
advance!

> Here's the code...
sorry, but again- please upload the page someplace.
Don't attach it to a post, don't paste it in a post, upload
the page
someplace pls.
I and many others are viewing this forum with a newsreader,
not using the
web forums at the adobe web page.
The webforum-->NNTP newsgroup thingee has truncated your
post. So i can't
copy/paste it and use tools and sight read it. The code i see
is incomplete.
your post ends here for me:
Advanced course (9-4) — $450<br>
This course is for students already u
Just upload the thing to some ftp account someplace pls.
or if not possible, zip or rar the folder and send as an
attachment to
blu
at
formdude
dot
com
pls don't email anything over 10megs.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Re: Need help with open a web page

Dear friend i cant open www.truperenlinea.com maybe you can support me because i install IE but other 5.2 version,
i dont want install parallel and Windows, you can try to open for me and explain me.
See the right side in the web need can see the username and password space to fill.
Thank you so much
Best regards

Sorry, I got confused.
You need to stick you your original post.
Please don't post in someone elses thread, especially when the thread is completely in the wrong place to begin with and you post has nothing to do with the original post.

Need Help With Work Group Wiki Page (404)

I am somwhat of a novice with all this server stuff so I will try to explain....
I have done a standard server install of OS X 10.5.6 Server on my Xserve. Everything seemed to work like a charm. The only problem I am having is when I select my home page to be my Workgroup Wiki page (inside the standard server prefences window). When I select this and try to test the page with the link under the drop down (open home page), it opens Safari and the header looks right but the page says "Not Found. 404: No group with that name (workgroup) hosted on this server).
I have a Workgroup and then two other groups....print and interactive. I want people to be able to log-on and see the main work group wiki page and then be able to select to go to one of the other two groups. I have had this working before but had to reformat my hard drive and reinstall the OS.
From the page that comes-up, I CAN click on the "groups" link in the header bar and that does take me to a working page, but I want to be able to have people go to this workgroup page first.
Any help would be MUCH appreciated. Thanks in advance.

Hi,
If you have the original index.html file installed in the /Library/WebServer/Documents/ folder then your wikid server will use it to display the web service groups.
If you have changed the index.html file or substituted a different index.html then wikid will not be able to perform its display action.
HTH,
Harry

Need help with a simple php page link

I have a small .php to force the download of a file when a user clicks on a link:
<?php
header ("Content-type:application/pdf");
header ("Content-Disposition:attachment;filename='form.pdf'");
readfile ("form.pdf");
?>
I need to include code which will redirect the user back to the home page without opening a new browser window, either during or immediately after downloading the file. And if it's possible, prevent the browser back button to return the user to the download page.
I tried adding this after the readfile line: echo "<a href="mywebsite.com/index.html" /a>";
but that failed miserably. My php knowledge is as weak as a bull moose after the mating season. Can someone help me out on this?

If you couldn't tell whether it is AS2 or AS3, it is doubtful you can turn it from AS2 into AS3, at least not until you learn both languages. There is no tool made that does it for you.

Need help with iPad 2 web page access requiring Adobe Flash Player

New to apple have iPad 2 WiFi and need to access web pages that utilize adobe flash player what are my options since adobe and apple are not friends

There are options in the app store, which may or may not work. iSwifter and puffin are two you may try.......

Need help with class info and cannot find symbol error.

I having problems with a cannot find symbol error. I cant seem to figure it out.
I have about 12 of them in a program I am trying to do. I was wondering if anyone could help me out?
Here is some code I am working on:
// This will test the invoice class application.
// This program involves a hardware store's invoice.
//import java.util.*;
public class InvoiceTest
     public static void main( String args[] )
     Invoice invoice1 = new Invoice( "1234", "Hammer", 2, 14.95 );
// display invoice1
     System.out.println("Original invoice information" );
     System.out.println("Part number: ", invoice1.getPartNumber() );
     System.out.println("Description: ", invoice1.getPartDescription() );
     System.out.println("Quantity: ", invoice1.getQuantity() );
     System.out.println("Price: ", invoice1.getPricePerItem() );
     System.out.println("Invoice amount: ", invoice1.getInvoiceAmount() );
// change invoice1's data
     invoice1.setPartNumber( "001234" );
     invoice1.setPartDescription( "Yellow Hammer" );
     invoice1.setQuantity( 3 );
     invoice1.setPricePerItem( 19.49 );
// display invoice1 with new data
     System.out.println("Updated invoice information" );
     System.out.println("Part number: ", invoice1.getPartNumber() );
     System.out.println("Description: ", invoice1.getPartDescription() );
     System.out.println("Quantity: ", invoice1.getQuantity() );
     System.out.println("Price: ", invoice1.getPricePerItem() );
     System.out.println("Invoice amount: ", invoice1.getInvoiceAmount() );
and that uses this class file:
public class Invoice
private String partNumber;
private String partDescription;
private int quantityPurchased;
private double pricePerItem;
     public Invoice( String ID, String desc, int purchased, double price )
          partNumber = ID;
     partDescription = desc;
     if ( purchased >= 0 )
     quantityPurchased = purchased;
     if ( price > 0 )
     pricePerItem = price;
public double getInvoiceAmount()
     return quantityPurchased * pricePerItem;
public void setPartNumber( String newNumber )
     partNumber = newNumber;
     System.out.println(partDescription+" has changed to part "+newNumber);
public String getPartNumber()
     return partNumber;
public void setDescription( String newDescription )
     System.out.printf("%s now refers to %s, not %s.\n",
partNumber, newDescription, partDescription);
     partDescription = newDescription;
public String getDescription()
     return partDescription;
public void setPricePerItem( double newPrice )
     if ( newPrice > 0 )
pricePerItem = newPrice;
public double getPricePerItem()
return pricePerItem;
Any tips for helping me out?

System.out.println("Part number:
"+invoice1.getPartNumber;
The + sign will concatenate invoice1.getPartNumber()
after "Part number: " forming only one String.I added the plus sign and it gives me more errors:
C:\>javac InvoiceTest.java
InvoiceTest.java:16: operator + cannot be applied to java.lang.String
        System.out.println("Part number: ",   + invoice1.getPartNumber() );
                                              ^
InvoiceTest.java:17: cannot find symbol
symbol : method getPartDescription()
location: class Invoice
        System.out.println("Description: ", + invoice1.getPartDescription() );
                                                      ^
InvoiceTest.java:17: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Description: ", + invoice1.getPartDescription() );
                  ^
InvoiceTest.java:18: cannot find symbol
symbol : method getQuantity()
location: class Invoice
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                                                   ^
InvoiceTest.java:18: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                  ^
InvoiceTest.java:19: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Price: ", + invoice1.getPricePerItem() );
                  ^
InvoiceTest.java:20: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Invoice amount: ", + invoice1.getInvoiceAmount() );
                  ^
InvoiceTest.java:24: cannot find symbol
symbol : method setPartDescription(java.lang.String)
location: class Invoice
        invoice1.setPartDescription( "Yellow Hammer" );
                ^
InvoiceTest.java:25: cannot find symbol
symbol : method setQuantity(int)
location: class Invoice
        invoice1.setQuantity( 3 );
                ^
InvoiceTest.java:30: operator + cannot be applied to java.lang.String
        System.out.println("Part number: ", + invoice1.getPartNumber() );
                                            ^
InvoiceTest.java:31: cannot find symbol
symbol : method getPartDescription()
location: class Invoice
        System.out.println("Description: ", + invoice1.getPartDescription() );
                                                      ^
InvoiceTest.java:31: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Description: ", + invoice1.getPartDescription() );
                  ^
InvoiceTest.java:32: cannot find symbol
symbol : method getQuantity()
location: class Invoice
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                                                   ^
InvoiceTest.java:32: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
        System.out.println("Quantity: ", + invoice1.getQuantity() );
                  ^
InvoiceTest.java:33: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Price: ", + invoice1.getPricePerItem() );
                  ^
InvoiceTest.java:34: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
        System.out.println("Invoice amount: ", + invoice1.getInvoiceAmount() );
                  ^
16 errors

Need help with correct setup for SuiteLink - Get ACE error message 7078

When I enable SuiteLink via:
ace_set_mode( g_ah, ACE_MODE_ENABLE_SUITELINK, TRUE );
ace_set_file( g_ah, ACE_DIR_SUITELINK, "D:
PW
201108
SuiteLink" );
ace_set_file( g_ah, ACE_DIR_NAME_PARSING_FILES, (char*)"D:
PW
201108
ncoalink");
Right after
ace_open( g_ah );
I get the following ACE error: 7078
where the description is: an incompatible version of the name parsing library required to run was found.
1) I'm not entirely sure where ACE_DIR_NAME_PARSING_FILES should be pointing to. We don't use NCOA but the documention says both SuiteLink and NCOALink use the same parsing files.
Inside NCOALink\ there is parsing.dct with a datestamp of 1/13/2009 which seems old.
I am running ACE800cRev5, just downloaded the July 2011 directories. ace32.dll version 8.4.5.0
Thanks!

Michael,
A regular ACE job with Suitlink enabled would also use the same parsing files located in ncoalink\. The parsing.dct included with my ACE 8.00c.05 is also dated 1/13/2009.
I have little expertise with ACE RAPID, but I would guess that ACE_DIR_NAME_PARSING_FILES should also be set ncoalink\
Regards,
Brandon

Need help with RAID Card and degraded Raid-5 errors

Dear all,
I recently purchased a used Apple RAID card for my 2008 Mac Pro 8-Core. The installation went smooth, the card was immediately recognized and the battery reconditioned within one night.
So I started setting up a Raid Set with the 4 identical drives which I already used before as a software Raid. But each time the Raid Level-5 Volume is created, somewhat later the status turns red and the Raid is listed as "degraded"!
A closer look at log reveals:
+19:42:54 Drive carrier 00:01 inserted+
+19:42:27 Background task aborted: Task=Init,Scope=DRVGRP,Group=RS1+
+19:42:27 Degraded RAID set RS1 - No spare available for rebuild+
+19:42:26 Degraded RAID set RS1+
+19:42:22 Drive carrier 00:01 removed+
+15:10:57 Created volume “R1V1” on RAID set “RS1”+
So it seems that the drive from Bay 1 somehow gets lost (removed) a few hours after the volume is being created and anysoon later it's being "reinserted"...
Of course, the drive is NOT removed, nobody touched the Mac Pro! Also I did the same procedure 3 times and the result was always the same.
I also tried setting up JBOD and different RAID levels which do all work without a problem. Only when choosing RAID5 (what I intentionally bought the card for), the problem reappears
Anyone any solution or hint for me concerning this problem? Many thanks in advance!

One drive completely broke down later. Replaced that drive and since the problem's gone!

I need help with iTunes sign in, I get an error!

When ever I try to sign in to my iTunes account, I just get "We could not complete your iTunes Store request. An unknown error occurred (-9808) There was an error in the iTunes Store. Please try again later"
I have been "trying again later" for months! What can I do to FIX THIS?

Check your internet settings.
Control Panel – Internet Options – Advanced
Uncheck “Check for server certificate revocation (requires restart)”
Click okay

I need help with my mapping - CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV

hi, guys, i need help with my mapping, i dont know this error (i not speak english)
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 4B903E2DDC853C1493E1DED5C5ED70A3 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 88D96A70BAAE11DFAE5EE925C0A800C2 </Trace>
<Trace level="1" type="T">Mapping-Object-Id:4B903E2DDC853C1493E1DED5C5ED70A3 </Trace>
<Trace level="1" type="T">Mapping-SWCV:88D96A70BAAE11DFAE5EE925C0A800C2 </Trace>
<Trace level="1" type="T">Mapping-Step:1 </Trace>
<Trace level="1" type="T">Mapping-Type:JAVA_JDK </Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_mm_sgipi_fi001_vta_clientes_ </Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload </Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty </Trace>
<Trace level="3" type="T">Executing multi-mapping </Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
help me please

you can use the sharedobject to record a user/computer has taken your quiz, the session data and record their results. at the start of your quiz, check for the sharedobject and, if it exists, check the other data and take appropriate action.

Need help with home work see what you got

1. The MEMBERS table has the phone number broken into three fields:
   CountryCode - e,g., '1' for the United States
   AreaCode - e.g., three digits for the United States
   Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
   Any or all of the fields may be missing (null) or blank or contain only spaces.
   Write a T-SQL statement to concatenate the three fields into a complete phone number
   with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
   If no Phone is present, return a blank string.
   If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
   For this purpose, each row contains:
   PersonID - unique member identifier
   Campaign - name of war/conflict
   Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
   E.g., PersonID    Campaigns
         12345678    Global War on Terror, Iraq, Afghanistan
3. The MEMBER_STATISTICS table contains one row per post.
   For this purpose, each row contains the post's:
   Division - a way of grouping posts by their member size
   Department - the state in which the post is located
   PostNumber - unique post identifier
   Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
   Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
   Rank them by highest to lowest reinstated count.
   Return their Division, Rank, Department, PostNumber, Reinstated

I got 3 home work questions think i have the first two need help with the last one please.
Kinda stuck on #3 hard I can see data not sure witch to sum or count?
1. The MEMBERS table has the phone number broken into three fields:
CountryCode - e,g., '1' for the United States
AreaCode - e.g., three digits for the United States
Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
Any or all of the fields may be missing (null) or blank or contain only spaces.
Write a T-SQL statement to concatenate the three fields into a complete phone number
with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
If no Phone is present, return a blank string.
If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
ANSWER******************
Notes: created a funtion to format the phone
Then used the this function in a select to concatenate Phone
CREATE FUNCTION dbo.FORMATPHONE (@CountryCode int, @AreCode int, @Phone VARCHAR(14))
RETURNS VARCHAR(14)
AS BEGIN
DECLARE @ReturnPhone VARCHAR(14)
DECLARE @NewPhone VARCHAR(14)
-- Note case sets newphone to null if phone null or '' also to see if phone has '-' in it if not inserts into newphone
case
when @Phone is null or @Phone = ''
Then SET @NewPhone = Null
when @Phone = substring(@Phone,4,1)='-'
Then SET @NewPhone = @Phone
else
SET @NewPhone = substring(@Phone,1,3)+'-'+ substring(@Phone,4,4)
End
case
when @NewPhone is null then SET @ReturnPhone = @NewPhone
elese case
when @AreCode is null or @AreCode = '' then SET @ReturnPhone = @NewPhone
else
SET @ReturnPhone = @CountryCode + '(' + @AreCode + ')' + @NewPhone
END
END
RETURN @ReturnPhone
END
select dbo.FORMATPHONE(CountryCode,AreCode,Phone)
from MEMBERS
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
For this purpose, each row contains:
PersonID - unique member identifier
Campaign - name of war/conflict
Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
E.g., PersonID Campaigns
12345678 Global War on Terror, Iraq, Afghanistan
ANSWER******************
SELECT PersonID,
STUFF(( SELECT ',' + Campaign AS [text()]
FROM PERSON_CAMPAIGN
WHERE (PersonID = Results.ID)
FOR XML PATH('')
), 1, 1, '' )
AS Campaigns
FROM PERSON_CAMPAIGN Results
3. The MEMBER_STATISTICS table contains one row per post.
For this purpose, each row contains the post's:
Division - a way of grouping posts by their member size
Department - the state in which the post is located
PostNumber - unique post identifier
Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
Rank them by highest to lowest reinstated count.
Return their Division, Rank, Department, PostNumber, Reinstated

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

I have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest from itouch to laptop please??

i have an itouch, most songs i got off my cd's. i have a new laptop and want to put songs from itouch to laptop.I can only get the songs that i purchased onto the laptop? need help with how to get the rest of the songs (from my cd's) from itouch to laptop please??

See this previous discussion:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Need help with a bookmarkable/Anonymous page, Got wierd error.

Similar Messages

Maybe you are looking for