Need help with links and fill color

Hi all, I just recently discovered liveCycle and am very impressed with it! I have been trying to make myself a homework calendar for a while now, and I have it done mostly, but there are a few more things I'd like to add that I don't know how to do.
I have some HTML and Java experience, but very little XML or JavaScript experience. I have a feeling that what I am trying to do is relatively simple, but I just can't figure it out! I have spent hours pouring over Google and the help files, and I feel like I have gotten close, but no joy yet.
I have attached my calendar so far (truncated to fit 5MB max attachment size). I'd like it to do two more things:
1. Have the background color of the table cells change from white to green when the check box is checked.
(Alternately, I'd really like to get rid of the check boxes all thogether and just have the background of the table cells turn green with a keyboard shortcut, like "ctrl + D" for 'done'. But if that isn't possible, then the color change with the check box is fine.)
2. I'd like the button called 'WORD DOC' in the upper right of the form to open a word document on my local computer. Where I just push that button and a work doc opens right up in Word in another window.
I was able to get .PDF documents to open up with those other two buttons there ('Big Java' and 'Beginning Java II') by adding the script
app.openDoc("Big Java.pdf");
and
app.openDoc("Beginning Java II.pdf");
to each of the buttons respectively, but those PDFs need to be in the same folder as the calendar for that to work. I tried just altering that script by replacing the name of the PDF file with the name of a Word doc file like this:
app.openDoc("test.docx");
but the button doesn’t work at all, it just does nothing.
So that’s what I am trying to do. I have spent hours messing around with anything I could think of to get this to work, but unfortunately I just don’t know the language well enough to get it to work.
I would really appreciate any advice on this at all. Thank you very much for your consideration.

Hi,
Thanks very much for your response! I was able to use the code to make the box turn green by adding that script to the 'click' event of textbox and changing the language from FormCalc to JavaScript. So what happened was that when I clicked in the textbox, the color turned green.
I couln't firgure out how to add it to the checkbox though. When I tried, it didn't do anything. The problem now is that when I click in the textbox to add my homework, it turns green. I need it to turn green once I finish my homework.
This would work great if the texbox turned green when I SHIFT clicked the box. Is there anything I could add to that scipt to do that?

Similar Messages

  • Acrobat  X Pro- Need Help with Linking and creating a flyout window in PDF

    I'm trying to create a flyout window in a PDF document (Have Acrobat X-Pro) I'm not a programmer or graphics designer. Almost like a flyout or callout in a Powerpoint presentation.
    Basically I want to create multiple icon/s on the base PDF page drawing and have several links to other pictures or items that when opened, wouldn't take up the whole screen and can then be closed so you'd only be looking at the base PDF page.
    I've tried using the link tool, but only seems to let me create a small rectangle box, click on it and have a new pdf or other file window open up. This is ok, but not really what I need it to do. I want this new window (or even a flyout) to be smaller so it doesn't cover the original base PDF layer and still be able to be closed.
    - Anyone have directions on how to do that in a pdf?
    - Also, is there a way to create a custom link icon instead of that lame rectangle in the link tool?

    Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
    You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
    // Get the icon from the b3 button
    var oIcon = getField("b3").buttonGetIcon();
    // Get  reference to the b0 button
    var f = getField("b0");
    // Set the icon of the b0 button to the icon retrieved from the hidden button
    f.buttonSetIcon(oIcon);
    // Show the b0 button
    f.display = display.visible;
    This code would go in the Mouse Up event of the smaller button.

  • MOVED: [Athlon64] Need Help with X64 and Promise 20378

    This topic has been moved to Operating Systems.
    [Athlon64] Need Help with X64 and Promise 20378

    I'm moving this the the Administration Forum.  It seems more apporpiate there.

  • Need help with JTextArea and Scrolling

    import java.awt.*;
    import java.awt.event.*;
    import java.text.DecimalFormat;
    import javax.swing.*;
    public class MORT_RETRY extends JFrame implements ActionListener
    private JPanel keypad;
    private JPanel buttons;
    private JTextField lcdLoanAmt;
    private JTextField lcdInterestRate;
    private JTextField lcdTerm;
    private JTextField lcdMonthlyPmt;
    private JTextArea displayArea;
    private JButton CalculateBtn;
    private JButton ClrBtn;
    private JButton CloseBtn;
    private JButton Amortize;
    private JScrollPane scroll;
    private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
    private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
    private JComboBox rateTermList;
    double interest[] = {5.35, 5.5, 5.75};
    int term[] = {7, 15, 30};
    double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
    int termInMonths, month, termLoop, monthLoop;
    public MORT_RETRY()
    Container pane = getContentPane();
    lcdLoanAmt = new JTextField();
    lcdMonthlyPmt = new JTextField();
    displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
    rateTermList = new JComboBox(rateTerm);
    scroll = new JScrollPane(displayArea);
    scroll.setSize(600,170);
    scroll.setLocation(150,270);//DEFINE BUTTONS
    CalculateBtn = new JButton("Calculate");
    ClrBtn = new JButton("Clear Fields");
    CloseBtn = new JButton("Close");
    Amortize = new JButton("Amortize");//DEFINE PANEL(S)
    keypad = new JPanel();
    buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
    keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
    keypad.add(new JLabel("Loan Amount$ : "));
    keypad.add(lcdLoanAmt);
    keypad.add(new JLabel("Term of loan and Interest Rate: "));
    keypad.add(rateTermList);
    keypad.add(new JLabel("Monthly Payment : "));
    keypad.add(lcdMonthlyPmt);
    lcdMonthlyPmt.setEditable(false);
    keypad.add(new JLabel("Amortize Table:"));
    keypad.add(displayArea);
    displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
    buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
    buttons.add(CalculateBtn);
    buttons.add(Amortize);
    buttons.add(ClrBtn);
    buttons.add(CloseBtn);//ADD ACTION LISTENER
    CalculateBtn.addActionListener(this);
    ClrBtn.addActionListener(this);
    CloseBtn.addActionListener(this);
    Amortize.addActionListener(this);
    rateTermList.addActionListener(this);//ADD PANELS
    pane.add(keypad, BorderLayout.NORTH);
    pane.add(buttons, BorderLayout.SOUTH);
    pane.add(scroll, BorderLayout.CENTER);
    addWindowListener( new WindowAdapter()
    public void windowClosing(WindowEvent e)
    System.exit(0);
    public void actionPerformed(ActionEvent e)
    String arg = lcdLoanAmt.getText();
    int combined = Integer.parseInt(arg);
    if (e.getSource() == CalculateBtn)
    try
    JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
    catch(NumberFormatException ev)
    JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
    if ((e.getSource() == CalculateBtn) && (arg != null))
    try{
    if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
    monthlyInterest = interest[0] / (12 * 100);
    termInMonths = term[0] * 12;
    monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest,  -termInMonths))));
    lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
    if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
    monthlyInterest = interest[1] / (12 * 100);
    termInMonths = term[1] * 12;
    monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest,  -termInMonths))));
    lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
    if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
    monthlyInterest = interest[2] / (12 * 100);
    termInMonths = term[2] * 12;
    monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest,  -termInMonths))));
    lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
    catch(NumberFormatException ev)
    JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
    }                    //IF STATEMENTS FOR AMORTIZATION
    if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
    loopy(7, 5.35);
    if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
    loopy(15, 5.5);
    if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
    loopy(30, 5.75);
    if (e.getSource() == ClrBtn)
    rateTermList.setSelectedIndex(0);
    lcdLoanAmt.setText(null);
    lcdMonthlyPmt.setText(null);
    displayArea.setText(null);
    if (e.getSource() == CloseBtn)
    System.exit(0);
    private void loopy(int lTerm,double lInterest)
    double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
    int amount, months, termloop, monthloop;
    String lcd2 = lcdLoanAmt.getText();
    amount = Integer.parseInt(lcd2);
    termloop = 1;
    paid = 0.00;
    monthlyrate = lInterest / (12 * 100);
    months = lTerm * 12;
    monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
    total = months * monthly;
    balance = amount;
    while (termloop <= lTerm)
    displayArea.setCaretPosition(0);
    displayArea.append("\n");
    displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
    displayArea.append("\n");
    displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
    monthloop = 1;
    while (monthloop <= 12)
    monthint = balance * monthlyrate;
    monthprin = monthly - monthint;
    balance -= monthprin;
    paid += monthly;
    displayArea.setCaretPosition(0);
    displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
    displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
    monthloop ++;
    termloop ++;
    public static void main(String args[])
    MORT_RETRY f = new MORT_RETRY();
    f.setTitle("MORTGAGE PAYMENT CALCULATOR");
    f.setBounds(600, 600, 500, 500);
    f.setLocationRelativeTo(null);
    f.setVisible(true);
    }need help with displaying the textarea correctly and the scroll bar please.
    Message was edited by:
    new2this2020

    What's the problem you're having ???
    PS.

  • Need help with trim and null function

    Hi all,
    I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
    Thanks

    Hi,
    Thanks for the reply. What am I doing wrong?
    SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
    (AL1.user_data_text,'XX')
    FROM Table
    I want the XX to appear in the same column as the
    trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
    What you're saying is:
    SELECT  trim ( SUBSTR (AL1.user_data_text, 1, 3))
    ,       NVL ( AL1.user_data_text, 'XX' )
    FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
    If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
    SELECT  NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
                , 'XX'
    FROM    Table

  • I need help with CSS and floating

    Okay, I know I need to get up on CSS and get rid of tables in
    my sites.
    However, I'm running up against a problem, and after banging
    my head
    against it for a while, I realize I need help. I've stripped
    this down
    so as to only show the area where I'm having difficulty.
    What I want is a page that has everything down the center,
    taking up no
    more than 750 pixels and no more than 550 pixels of width. No
    problem there.
    After the header and the top content, I'd like to have two
    "columns",
    each in it's own separately-colored box. I would like the
    right-side
    column/box to be a static size, while the left-side
    column/box sizes
    dynamically.
    Where I'm having problems is that when one column is boxed,
    it's fine,
    but whenever I wrap each column in its own box, the
    fixed-size box
    either jumps below or above the other box (depending on which
    one has
    been floated and which order the div's appear in the code).
    Here are the links:
    CSS:
    http://www.afice.org/stylesheet/floatmestyles.css
    ex 1:
    http://www.afice.org/floatme1.html
    ex 2:
    http://www.afice.org/floatme2.html
    Before sending, I took a look again, just to see if I was
    missing
    anything. I did notice that it doesn't seem to be that the
    box is
    jumping down so much as it is that it's getting written over.
    Anyway, sorry for the long-winded explanation. I hope I've
    managed to
    explain what I'm trying to do well enough that someone can
    tell me where
    I'm going wrong.
    Thanks,
    --Kevin

    Do you want something like this:
    http://www.pmob.co.uk/temp/spointfooter.htm
    You will need to look at the code to see how it was done.
    Otherwise, there are different examples here on Pauls' site:
    http://www.pmob.co.uk/temp/3colfixedtest_4.htm
    Nadia
    Adobe� Community Expert : Dreamweaver
    http://www.csstemplates.com.au
    - CSS Templates | Free Templates
    http://www.perrelink.com.au
    - Web Dev
    http://www.DreamweaverResources.com
    - Dropdown Menu Templates|Tutorials
    http://www.adobe.com/devnet/dreamweaver/css.html
    "Kevin D-R" <[email protected]> wrote in
    message
    news:[email protected]...
    > Okay, I know I need to get up on CSS and get rid of
    tables in my sites.
    > However, I'm running up against a problem, and after
    banging my head
    > against it for a while, I realize I need help. I've
    stripped this down so
    > as to only show the area where I'm having difficulty.
    >
    > What I want is a page that has everything down the
    center, taking up no
    > more than 750 pixels and no more than 550 pixels of
    width. No problem
    > there.
    >
    > After the header and the top content, I'd like to have
    two "columns", each
    > in it's own separately-colored box. I would like the
    right-side column/box
    > to be a static size, while the left-side column/box
    sizes dynamically.
    >
    > Where I'm having problems is that when one column is
    boxed, it's fine, but
    > whenever I wrap each column in its own box, the
    fixed-size box either
    > jumps below or above the other box (depending on which
    one has been
    > floated and which order the div's appear in the code).
    >
    > Here are the links:
    >
    > CSS:
    http://www.afice.org/stylesheet/floatmestyles.css
    >
    > ex 1:
    http://www.afice.org/floatme1.html
    >
    > ex 2:
    http://www.afice.org/floatme2.html
    >
    > Before sending, I took a look again, just to see if I
    was missing
    > anything. I did notice that it doesn't seem to be that
    the box is jumping
    > down so much as it is that it's getting written over.
    >
    > Anyway, sorry for the long-winded explanation. I hope
    I've managed to
    > explain what I'm trying to do well enough that someone
    can tell me where
    > I'm going wrong.
    >
    > Thanks,
    >
    > --Kevin

  • Need help with 7204vxr and metro-e

    ok i have a cisco 7204vxr that i am trying to use for metro ethernet that we had turned up today that is dmarc'd and ready.
    the isp gave us this:
    Customer router IP
    Customer router default gateway "not sure how to set that up"
    and customer network IP range
    i have the assigned FastEthernet 3/0 port in the front bay of the router the IP address and subnet that our ISP gave us for our router address.  this interface is connected to the d'marc.
    i have also assigned GigabitEthernet 1/0 in the back of the router with the an ip and subnet from the ip range we were given for our use and saved the config.
    if i take a laptop and plug in into the GigabitEthernet 1/0 on the back and assign it an ip and subnet from our new useable range and the ISP's dns i can't browse or ping anything past of the router.
    i am able to ping the ISP's router from the mine.
    i have not set up any routes because i am not sure what to do yet.
    any help would be appreciated as our current ISP is turning our business' service off at midnight tonight.

    ok i have a cisco 7204vxr that i am trying to use for metro ethernet that we had turned up today that is dmarc'd and ready.the isp gave us this:
    Customer router IP
    Customer router default gateway "not sure how to set that up"and customer network IP rangei
    have the assigned FastEthernet 3/0 port in the front bay of the router
    the IP address and subnet that our ISP gave us for our router address.
    this interface is connected to the d'marc.i
    have also assigned GigabitEthernet 1/0 in the back of the router with
    the an ip and subnet from the ip range we were given for our use and
    saved the config.if
    i take a laptop and plug in into the GigabitEthernet 1/0 on the back
    and assign it an ip and subnet from our new useable range and the ISP's
    dns i can't browse or ping anything past of the router. i am able to ping the ISP's router from the mine.i have not set up any routes because i am not sure what to do yet.any help would be appreciated as our current ISP is turning our business' service off at midnight tonight.
    Hi,
    As per the thread what i understand a router with two interface one facing towards the isp with point to point link and other end as lan interface,If yes then you need to configure a default route towards your isp for outgoing traffic and ask your isp to put a reverse route for your local lan subnet towards your routers want interface.
    Hope that Help !!
    Remember to rate the helpful post
    Ganesh.H

  • Need help with INSERT and WITH clause

    I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
    with t1 as(
    select a.budat,a.monat as period,b.vtweg,
    c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
    c.wrbtr,
    c.matnr,
    c.menge,
    a.monat,
    c.zuonr
    from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
    where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
    and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
    and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
    ,t2 as(
    select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
    where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
    ,tcogs as (
    select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
    sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
    from t2, ldw_v1.bseg
    where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
    group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
    bseg.matnr,bseg.kunnr
    ,t3 as
    select a.budat,a.monat,b.vtweg,
    c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
    case when c.shkzg='S' then c.wrbtr*(-1)
    else c.wrbtr end as NTS,
    c.matnr,c.kunnr,
    c.menge*(-1) as Quantity
    from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
    where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
    and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
    and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
    ,trevenue as (
    select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
    sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
    from t3
    group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
    select NVL(tr.budat,tc.budat) as budat,
    NVL(tr.monat,tc.monat) as monat,
    NVL(tr.vtweg,tc.vtweg) as vtweg,
    NVL(tr.gjahr, tc.gjahr) as gjahr,
    tr.hkont as NTS_hkont,
    tc.hkont as COGS_hkont,
    NVL(tr.prctr,tc.prctr) as prctr,
    NVL(tr.MATNR, tc.MATNR) as matnr,
    NVL(tr.kunnr, tc.kunnr) as kunnr,
    NVL(tr.Quantity, tc.Quantity) as Quantity,
    tr.NTS as NTS,
    tc.COGS as COGS
    from trevenue TR full outer join tcogs TC
    on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
    and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
    and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
    Edited by: user13566113 on 25.03.2011 5:26

    Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
    SQL> create table t ( n number );
    Table created.
    SQL> insert into t
      2  with test_data as
      3    (select 1 x from dual union all
      4     select 2 x from dual union all
      5     select 3 x from dual union all
      6     select 4 x from dual)
      7  select x from test_data;
    4 rows created.
    SQL>

  • Noob needs help with Logic and Motu live setup.

    Hello everyone,
    I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
    Here's the scenario:
    I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
    Here's the confusion:
    There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
    Here's the goal:
    All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
    I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
    I want to be able to EQ and balance the ensemble via Logic.
    Here's another question:
    How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
    Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
    Thanks in advance,
    Chris

    You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
    1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
    2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
    3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

  • Need help with mac and java

    Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
    I'm having a herrendous time trying to get quicktime to work on it.
    I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
    Now 1.4.1 doesnt work with quicktime
    I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
    Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
    But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
    Thank you

    If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
    Cheers,
    --Arnout                                                                                                                                                                                                                                                                                                                                                                   

  • I need help with CC and Lr

    I've been using Lr4 for quite a while and have bought a new camera. Lr4 doesn't support the camera so I downloaded the "trail" version of Lr5.4. When opening the program it gives me an option to try or buy. Well after trying I wanted to buy. I clicked on the link and it sent me to the Adobe page. There I was sent further into the site to purchase the program. When I got there a chat window popped open and I started a dialog with someone about my purchasing options. I could buy the full version for $149 or join the CC for $9.99 a month. After careful consideration I chose the CC. It took a while to figure out how to navigate through it, but have finally got a handle on it. The issue now is it tells me that my Lr is up to date, but when I open the program it still asks me to try or buy??? It asks if I have a serial number as if I purchased it and when I go on to the add a serial number I don't actually have one so I'm forced to "try" to open the program.
    What do I do now to run the program without being prompted to try or buy???
    Thanks

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    You may also simply need to run the cleaner tool and reinstall it from inside the CC app.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Need help with linked lists.

    I have a school assignment to make a linked list with a linked list.
    The first basic is to make a list of people, and link them together in a linked list. So far, so good.
    The problem comes when I'm going to make linked lists in each of these objects that include the relationships between the people in it.
    So If I have 10 peolpe in a list, person 1 might know person 3, 4 and 8. They will all know person 1 back of course. My problem is that it isn't just one group of friends, person 3 might not know person 4 and 8, but maybe he knows person 10. So all need "their own" list.
    Therefor I can't see how I'm supposed to use linked lists for them, as I can't just link them togeter with e.g. "Person nextFriend;" The text says specifically to use linked lists. Well, I'm stuck.
    Edited by: Skruf on Jan 27, 2009 3:22 PM

    Skruf wrote:
    I know it doesn't matter what the objects represent, I just needed a way to explain.
    But a linked list is basically just a redirect to the next in the list, right?No, a linked list is a particular implementation of a list.
    Then I can't see how it's possible to make individual friend lists.No clue what problem you're having.
    People with links
    null - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - nullThat means nothing.
    I can't see how that can be used to make independent links. Do they mean that I'm support to stort it in arrays or something then?
    The person list, is (as you can see in my "illustration") only a "next" and "previous" person, so I can't use that way to link the friends together. nextFriend and lastFriend obviously doesn't work.
    That's my problemLike I said: A Person object contains a linked list. In that linked list you put references to that Person's friends.

  • Day one of my new MacBook Pro & I desparately need help with calendar and email

    It's day one of my new relationship with a Mac, and I need help! I'd like to use microsoft exchange to sync my calendars to iCal &amp; my emails the way I currently do with my iPhone 4 and iPad 2. The problem is that all I get are error messages. They either say that communication with the server cannot be established or communication to ports 80 &amp; 440 cannot be established. One account I'd an ssl and the others are gmail. Please advise!

    anyone? please? i would appreciate any information.

  • Need help with GetStringUTFChars and JAB

    Please help,
    I want to use the JNI function GetStringUTFChars with JAB (Java Access Bridge), without having to call JNI_CreateJavaVM as no matter what I do, JNI_CreateJavaVM fails. I have JAB successfully loaded, and I have used GetAccesibleFromHWND to get a valid jobect. Is there any way I can go from the jobect to use GetStringUTFChars?
    If not, is the source code availabe for GetStringUTFChars? OR is there an Windows/C++ equivalent available?

    RPhilbrook12, you've reached the right place for information regarding how to suspend your line while you're deployed. Are you being deployed for military purposes? If you have received military orders to relocate for 90 days or more to an area where Verizon Wireless doesn’t provide coverage and you need to suspend your service, you can contact us at 800-922-0204. You will need to be  prepared to provide information from your orders, including where you’ll be stationed and the name and rank of your Commanding Officer. Please be advised that your service can be suspended for up to 3 years for military deployment.
    For more details regarding your options to suspend services, click http://vz.to/1lfmyUI
    LasinaH_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Hey guys i need help with facetime and i am ready to blow up!

    I got some many ppl telling me that i have to pay for facetime! My dad got iphone 4 and we live in canada (calgary) My brother lives in Australia and i have mac! Is facetime free to talk to him! Telus is telling us that it will cost my dad 2 dollars a min then Rogers is telling us it is free! I need help cause if both have wifi it should be free! We want to know! Please let me know! thanks! I am ready to blow up here LOL!

    All FaceTime calls are over WiFi, thus they are "free", unless you're using a WiFi hotspot that charges for its use.

Maybe you are looking for