Need help with making the webpage open in same window

Hi. I want to make the menu page load in the same window.
Right now, if you click on the index page, it will open the menu
page in a new window. I know I need to use _self, or _parent. But I
couldn't figure out where to insert it. Please help. Thanks.

in case of your mentioned function it'd be just like:
inv_btn.addEventListener(MouseEvent.CLICK,
buttonClickHandler);
function buttonClickHandler (event:MouseEvent):void {
navigateToURL(new URLRequest("
http://www.detailshardware.com/menu.html"),"_blank");
That's all.

Similar Messages

I need help in making the programe which updates our code into client machi

I need help in making the programme which updates our code into client machine from the server.
As yahoo messanger does if there is any updated version of yahoo messanger.
It asks when we login into it do you want to update new version of yahoo messanger
It automatically updates it
Need Help??

Sounds to me like you need Java Web Start.

Question: Need help with overcoming the following message: "Nothing was imported.

Need help with overcoming the following message: “Nothing was imported. The file(s) or folder(s) selection to import did not contain any supported file types, or the files are already in this catalogue”.
The photos being scanned are old film shots. They have NOT been previously scanned. I am using Photoshop Elements 9 software.
QUESTION: how do I override this STOP and or circumvent the photo comparison option????
Thanks for the help. Bob K --- [email protected]

Are you scanning as jpeg, tiff or some other format?
Are you using continuous numbering for files names as by definition scanned files have no exif data.

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

Need help with accessing the program.

I need help with accessing my adobe creative cloud on my windows 8.1 laptop. I have an account but do not have an app. I need this for my online classes. Please help!

Link for Download & Install & Setup & Activation may help
-Chat http://www.adobe.com/support/download-install/supportinfo/

I need help with making multiple measurements

Hello,
   I have photoshop cs6 extended addition and was told photoshop would work for the research application I need but so far I am finding it very difficult to do what I want. Basically, I need to be able to meausre multiple lines (the red ones in the screen shot) of an image precisely, and make sure that the lines I measure are documented so that they are actually visiable (so not just with the ruler tool) on the screen and labeled. Does anyone have any idea how to approach this problem? See image for example. I need the lengths (converted with the 2 micrometer scale at the bottom of the image). When I use the info, it gives me the lengths, but I can't save them, or look them up at a different time. Also, when using the line tool, then doing the "record measurement" it does not give me the length of the line but insted acts like it is a thin rectangle and gives me a height (which does not seem to be the same as if I used the measurement tool and put it next to the line, which is an idea I have, but not as accurate) and a width. Ideas?

Curt,
   I tried what you said but am still confused. First, while I will be viewing a few pictures, I am just concerned with getting the process to work with ONE picture measuring all the lines I need for it before worrying about other pictures. I don't understand what you mean when you say making a scale for each picture of any size. Its not about plotting a scale on the picture (I already have that in the form of the 2 micron line) its a matter of drawing new lines on top of the picture and calculating the lengths of those lines (like the red lines I put in the original screen shot). Do you understand?
After I make the box around the 2 micron scale in the image, then press copy then press paste, nothing seems to happen. So when I Click NEW and it opens a new window (for a completely new workspace) nothing different happens. You meant to click "New" after first going to the top and selecting "file" right?
Since I am having trouble with that step, im not sure I can do the rest.
For step 2, What do you mean by "In background content click the dropdown box and select Transparent."   ALl I see is a layer called background on the right. I can right click on it and set the opacity to 0, but I don't see the term 'transparent' to actually select.
Like for step three, how could I delete the selection I made by dragging to the trash? Once I press on it, it resets.....
Ok not sure whatelse I can ask since I couldn't really do the first step anyways....

Need help with changing the name.

I got my palm pre from an uncle who lives in the states. The problem is I can't call tech support to ask them because I live in belize. The proble I have with my pre is that I have added my email account to the phone, but when I send an email, they receive it in my uncles name, my name is lanny and they receive an email form cesar, I think you can see where the problem lies. Is there anyway I can change it to my name? Please help!
Post relates to: Pre p100eww (Sprint)

Hello and thank you for using the Palm Help Forums!
I would create a new Palm Profile. To do this you will need to go to the Device Info app, Reset Options, then select Full Erase. All pictures, videos, and anything else stored in the USB side of the device will be erased. I recommend that if you want to keep any of that to connect your device to a computer then click and drag everything you want to keep off of the device and onto your computer.
After you perform the Full Erase the device is going to reboot. It is going to come up with a screen to sign in to a Palm Profile or Create a New Palm Profile. NOTE*** You will need a data connection to do this. Select Create a New Palm Profile and fill in the blanks. Once you are back into the device you can set up your email accounts again and it should display the name you created the Palm Profile with.
I hope this helps,
-Pat

I need help with using the Make With Top Object envelope distortion.

I'm doing a project for school called "Ocean Of Stars". I have a few objects,a sheet of purple stars and a few blue gradient colored circles. I need to merge the stars and the circles as one object, but when I click the Make with top object command, the color in the cicles disappear. I don't know what I'm doing wrong.
this is what my screen looks like now.
And this is what I need to make.
Any help is greatly appreciated!
Thanks!

His spheres are 3d yours are 2d. See what happens when you revolve a 1/2 a sphere. You will find a way to apply the stars in that same dialog box if you look really hard.

Need help with Raw file converter for ps6 on windows xp

I had to re-install my CS6 on my computer and now I can't get any of the raw files open. I'm not on the cloud and am running Windows xp, service pack 3. Can anyone help?

Thanks Richard. I made sure that I was totally up to date via help-updates on all programs (cs6 & bridge) and it still doesn't work. Any other thoughts? I remember vaguely that I had this problem before and had to download a new file. I tried looking on Adobe site and the suggestion is the raw conversion 8.3. Downloaded that (said it was for windows xp, serv. pack 3) and I can see the file but when I click on that it comes up as a .pf file and I"m not sure where to go from here ... or if I have now messed up everything really well.
Yes, XP is on the way out of my life as I need a new computer so this maybe the push that I need. But in the meantime, I really need to process some images.
Any other thoughts?
Noella

Need help with pictures on an external HDD and windows labtop to Ipad3

Hallo everybody!
This week (I finally) bought an Ipad 3 and an Apple TV!
For the time being I still have a windows labtop and an external HDD full with photo's.
The ICloud software for windows has been installed because I would like to stream the pictures from this external HDD to my Ipad and then ofcourse on my flatscreen TV (via Apple TV). And ofcourse back, when I have taken a photo or a movie on the Ipad 3.
I would appreciate some help with the following questions:
do I have add all pictures from the HDD into a new map on the windows labtop. So that via Icloud the contain could become 'in the cloud'.
or do I have to add all the pictures from the HDD into the Itunes map on the windows labtop.
I have connected the Ipad to the windows labtop and via Itunes I have synchroniced a lot of pictures to the Ipad. I asume these are copies? And is it possible to remove them from the Ipad, because it will take a lot of memory (currently already 35 GB from the 64 GB).
Well I hope somebody could help me.
Many thanks in advance!
Ronald from the Netherland

I just found out that ICloud isen't really a storage place for photo's. Just a passing throw station to your other devices.

Need help with making a Watermark

I am using Photoshop Elements 8 to make a watermark. All goes well until I get to the (Go to edit>select "Define Brushes") Define Brushes is not highlighted and will not let me select it. Helpful solutions would be most welcome. I have tried a number of things including uninstallingthe program, restarting, installing. I'm out of ideas.

You need to have an open image. So you must first create your watermark. Here are instructions for making a text watermark with bevel.
Create a template using the editor:
File >> New >> Blank File
Set your dimensions and resolution of 72 and choose transparent for your background color.
Select the type tool and add your name or watermark information.
Choose the effects pallet and under styles find the bevels. Drag the one you cant on top of the text. The go to File >> Save For Web
Select file type PNG24 (that will preserve the transparency) and then save your file.
You can now use this file to make your brush.
Go to Edit >> Define Brush
After you have saved your new brush pre-set select the brush tool and scroll down to the bottom of the brush list. You can apply to photos with one click.

Need help with easy script for open / close app and move files

Hi,
I'm not a scripter.. never done anything special perhaps more complicated than /shutdown -s on cmd..
I actually learned ASCII C language on university but never used it in real.
I'm trying to create a basic script that perhaps you could help me or guide me how to do it..
The commands are
1) Close a running app (end task it or force kill it, I prefer end task it)
2) delete files from x location
3) run .exe app from y location
4) close that running app
5) move files from z to y
Perhaps adding few "wait few seconds" commands in between each, so the apps will launch successfully..
My first question will be whats the easiest script language to do that?
I tried VBScript but couldn't find commands for open or close apps.. also for controlling files..
And what commands can do that? I could google them up for better understanding no need for rough guide
And lastly, does it too hard? If it takes more than hour to make it (learn and process) than it ain't worth it..
Thanks alot ahead!
Jordan.

hmm 2 questions:
1) taskkill.exe causing me access deny error.. I used "taskkill.exe /IM softwarename.exe"
how do I get permission or something to fix that?
2) on the "move" command..
First, its a "copy" instead.. but I easily figured that out..
but more important is that I want to copy a folder.. with unknown list of way too long files and sub folders..
and all I see is ability to move a file..
Is this possible?
Thanks

Task Scheduling Script - Need help with passing the scheduled command (variables are not being evaluated)

Hi Everyone,
I'm trying to get a simple task scheduler script to work for me and can't get the command I need passed to the scheduler to evaluate properly.
Here's the script:
###Create a new task running $Command and execute it Daily at 6am.
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$Command = 'winscp.com /command "option batch abort" "option confirm off" "open $Proto://$User:$Pwd@$Server" "put $NetworkDir $RemoteDir" "exit"'
$TaskAction = New-ScheduledTaskAction -Execute "$Command"
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"
What's messing up is the $Command creation, the command needs to have the quotes around "option blah blah", but if I wrap the whole line in single quotes the variables that are evaluated for the "open blah blah" strings (which also need
to be inside quotes) and the "put blah blah" string are not being evaluated properly.
I've dorked about with different bracketing and quoting but can't nail the syntax down, could someone point me in the right direction? My Google-fu seems to be lacking when it comes to nailing down this issue.
Thanks

Hmmn, closer. I'm getting this error now:
+ $Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (winscp.com /com...t {4} {5}" exit:String) [], RuntimeException
+ FullyQualifiedErrorId : FormatError
And the command being added to the new task looks like this:
winscp.com /command "option batch abort" "option confirm off" "open ($Proto)://($User):($Pwd)@($Server)" "put $NetworkDir $RemoteDir" "exit"
Here's the current state of the script. I get what you're doing to try to bypass the quotes issue, using an array. I'm just not awesome at this yet sooooooo...
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$tmpl = 'winscp.com /command "option batch abort" "option confirm off" "open {0}://{1}:{2}@{3}" "put {4} {5}" exit'
$Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
$TaskAction = New-ScheduledTaskAction -Execute $Command
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"

I need help with installing the flash player!

I am trying to install the flash player and as the download progresses it asks me to close internet explorer to continue. I close internet explorer and press the continue button and it repeats the request to close internet explorer. I have completely closed out of everything except the installing process and it still won't continue the download, it wants me to close out of internet explorer and I have already done that! Can anyone help me with this??? I am so frustrated. I am not an advanced computer user, but I have followed all the instructions for this procedure and end up with the same result... close internet explorer. I would appreciate assistance so much!

You need to close all iexplore.exe instances; use the Task Manager's Processes tab.

Need help with looping/repeat webpage in Apple Script

I would like to repeat an action in AppleScript by opening up a URL page in Safari, closing it, and then re-opening it again.
Can someone please help me with this action? Please be very specific in your response. I am not very familiar with this program.
Thank you

tell application "Safari"
    repeat with theURL in theURLs
        make new document
        set URL of front document to theURL
        delay 1
        repeat until ((do JavaScript "document.readyState" in front document) is "complete")
            delay 1
        end repeat
        close front document
    end repeat
end tell
This is what I have so far..but it is not working. It only opens it up ONCE. What I want is for the web page to repeatedly be generating every 1 or 2 seconds, after it closes out the previous one.
I want only ONE website continously being opened up.
Someone help please!!

Need help with making the webpage open in same window

Similar Messages

Maybe you are looking for