Need help with porting from Java 1.1 to 1.4

One of our applications is an applet and we're in the
process of upgrading it's version of Java from 1.1 to 1.4. For the most part,the upgrade has gone smoothly, but we are having two big problems. The first problem is that the list objects on one of the windows resize when a mouse event occurs on the Tabbed Panel it sits on. The list object is made from a Symantec class called MultiList. The list actually shrinks so that the data on it can hardly be seen.
The other problem is that when dispose() is called on all of the windows, an IllegalStateException: Cannot dispose InputContext while its active error occurs.

If you people have nothing good to say, please do the
rest of us in the forum(s) a favor and don't say
anything at all.
Also, do not assume that threads are posted because
people are lazy and haven't researched their
problem(s).
People post threads in these forums looking for help,
not abuse.What are you talking about?
If the original poster disregarded my advice and searched the bug database as indicated, they would have found the answer to their question. I know. I had the same problem and solved it by using the workaround I found in the bug database.
I would say it was very helpful advice.

Similar Messages

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Im DROWNING! need help with a simple java assignment! plz someone help me!

i need help with my java assignment, with validating a sin number. easy for must who know java. im drowning... please help!

You will need to store each digit of the social insurance number in a field of its own. To validate the entry you will:
1. Multiply the 2nd, 4th, 6th and 8th digit by 2.
2. If the product of any of the four multiplications result in a value greater than 9, add the two resulting digits together to yield a single-digit response. For example 6 * 2 = 12, so you would add the 1 and the 2 to get a result of 3.
3. Add these four calculated values together, along with the 1st, 3rd, 5th, and 7th digits of the original number.
4. Subtract this sum from the next highest multiple of 10.
5. The difference should be equal to the 9th digit, which is considered the check digit.
Example of validating S.I.N. 765932546
1st digit 7
2nd digit (6*2 =12 1+2=) 3
3rd digit 5
4th digit (9*2 = 18 1+8 =) 9
5th digit 3
6th digit (2*2 = 4) 4
7th digit 5
8th digit (4*2 = 8) 8
Total 44 next multiple of 10 is 50
50-44 = 6 which is the 9th digit
Therefore the S.I.N. 765932546 is Valid
********* SIN Validation *********
Welcome - Please enter the first number: 120406780
Second digit value multiplied by 2 4
Fourth digit value multiplied by 2 8
Sixth digit value multiplied by 2 12
Eighth digit value multiplied by 2 16
Value derived from 6th digit 3
Value derived from 8th digit 7
The total is 30
Calculated digit is 10
Check digit must be zero because calculated value is 10
The SIN 120406780 is Valid
this is my assignemtn this is what i have! i dont know where to start! please help me!
/*     File:     sinnumber.java
     Author:     Ashley
     Date:     October 2006
     Purpose: Lab1
import java.util.Scanner;
public class Lab1
          public static void main(String[] args)
               Scanner input = new Scanner(System.in);
               int sin = 0;
               int number0, number1, number2, number3, number4, number5, number6, number7, number8;
               int count = 0;
               int second, fourth, sixth, eighth;
               System.out.print("\t\n**********************************");
               System.out.print("\t\n**********SIN Validation**********");
               System.out.print("\t\n**********************************");
               System.out.println("\t\nPlease enter the First sin number: ");
               sin = input.nextInt();
               count = int.length(sin);
               if (count > 8 || count < 8)
               System.out.print("Valid: ");
     }

HT1766 I need help with restore from bachup

I NEED HELP WITH MY IPAD RESTORE FROM BACKUP

This is the iPod touch forum and you are not providing any information to help you.

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Need help on emailing from java

I need help on how to send an Email from a java application.
Can any body help me by providing correct code for that?
Thanks!

It worked.Thanks!So, are you gonna award the Dukes to prometheuzz or are you donating them to the forum pickle jar?
db

Need help with sum from previous years

Hi All,
In a report i have 4 fields. The first field shows the YTD invoice totals for the current FY 2010 (which i accomplished). The other 3 fields are :
2nd field Sum of the value of invoices for the FY 1YEAR prior to the current year
3rd field Sum of the value of invoices for the FY 2YEAR's prior to the current year.
4th field Sum of the value of invoices for the FY 3YEAR's prior to the current year.
How can i get the desired results for the second,third and the fourth fields, please need help or advice.
Thanks

Hi
If you have the values for several years in the same report you should be able to do what you want using the analytic LEAD and LAG.
LAG will retrieve values from previous rows whereas LEAD will retrieve values from following rows.
The basic syntax is the same and look like this:
LAG(value, offset) OVER ({optional_partition_clause} ORDER BY mandatory_order_clause)
The ORDER BY clause is mandatory and cannot be omitted. However, this ORDER BY has nothing to do with the sort order you manually create in the worksheet. Generally, most people will set their sort order the same as the ORDER BY in the calculation.
Here's an example that gets year to date from 2 financial years ago:
LAG(YTD,2) OVER (ORDER BY FY)
You have to understand that Discoverer will pull values from previous rows not from previous cells as displayed on the report, although if the cells may happen to be rows too then it will appear as though it is pulling previous cells. I personally am very experienced with analytuc functions and can make manipulate data within Discoverer just about any way that I want. Generally, if I can see data on the screen even when they are in different cells or rows I can create functions to manipulate it. This capability only comes about as a result of experience and I would strongly advise you to practice with the analytics and see if you can at least master some of them. You'll find your Discoverer capabilities will improve dramatically and you will become a great asset at work.
When working with a new report I generally duplicate the report as a table so that I can see the values. Then if I need to sort the items in order to line up the values I want to work with I do so. Having worked out what sort order I need I can then see what offset I use then I create the analytic and use it in the main worksheet.
Hope this helps
Best wishes
Michael

Need help with long term Java problems

I've been having problems with Java on my computer for about a year now, and I'm hoping that someone here can help me out.
Java used to work fine on the computer when I first got it (a Dell laptop) and I hadn't installed anything myself. But then one day it stopped loading Java applets, and hasn't worked since. By this, I mean that I get the little colorful symbol in a box when I try to play Yahoo games, use the http://www.jigzone.com site, go to chat rooms, etc. Java menus on websites like http://www.hartattack.tv used to work still, but lately they've been giving me that symbol too.
I've tried downloading a newer version of Java, but nothing I do seems to work, and I don't know of anything I did to trigger it not working. I'm hoping there's a simple solution to this, and I'm just dumb.
Thanks.

This might be way off, but it's something that's tripped me up in the past:
If you are using Sun's Java plugin, the first time you go to a site that has a particular Java applet, you may be asked to approve/reject a security request.
If you have clicked on any other windows while the request is first being loaded (which can take some time, because this is swing based), then the security dialog box does not pop to the top of the window stack, and doesn't add an entry into the task bar.
It appears that Java just doesn't work, but it's actually waiting for you to click "Yes". You can check this by hitting alt-tab and seeing if the Java coffee cup icon is one of the options.
- K

Need help with port mapping on Airport Utility 6.1

Ive been trying to port map on my TC with Airport Utility 6.1 and failing miserably. Port still closed. Can anyone advise where Im going wrong? Am trying to set up my home camera to be viewed outside.
I managed to key in the ports etc under Network and Port Settings. But nothing works. I'm tearing my hair out.
Any suggestions to try would be helpful.
Thanks

Use the 5.6 utility.. it is much easier and I think works better.. although you cannot load 5.6 directly into 10.8 the version for Lion actually works fine.
Download 5.6.
http://support.apple.com/kb/DL1482
Download unpkg
http://www.macupdate.com/app/mac/16357/unpkg
Open the AU 5.6 dmg and drag the pkg over the open unpkg.. it will create the directory on the desktop. You can either run it from there or drag the utility to your utilties directory.
Take screen shots of each step. Post them here.
That way we can tell you where it has gone wrong.
What port exactly does the camera need open?
How are you connecting remotely?
ie do you have a fixed public IP?? If not how are you getting IP?
Is the TC the only router in the network.. it is irrelevant unless the TC is the one and only router.

Need help with running a Java program on Linux

I am trying to get a Java program to run on a Linux machine. The program is actually meant for a Mac computer. I want to see if someone with Java experience can help me determine what is causing the program to stall. I was successful in getting it installed on my Linux machine and to partially run.
The program is an interface to a database. I get the login screen to appear, but then once I enter my information and hit enter the rest of the program never shows, however, it does appear to connect in the background.
Here is the error when I launch the .jar file from the command screen:
Exception in thread "main" java.lang.IllegalArgumentException: illegal component position
at java.awt.Container.addImpl(Unknown Source)
at java.awt.Container.add(Unknown Source)
I am not a programmer and I am hoping this will make some sense to someone. Any help in resolving this is greatly appreciated!

Well, without knowing a little bit about programming, and how to run your debugger, I don't think you're going to fix it. The IllegalArgumentException is saying that some call does not like what it's getting. So you'll have to go in an refactor at least that part of the code.

Need help with upgrade from Adobe Creative Suite to PS CS4

My old laptop with Photoshop on it crashed and I ended up purchasing a new laptop.
I'm trying to reload my PS CS4. I am using an upgrade from an educational Adobe Creative Suite Premium to the CS4 and when I loaded it on my old laptop I had to get installation help through customer service, but now customer service will not help me since it is CS4.
When installing the upgrade, it tell me to select the product I already own. I own the educational full creative suite, but am only upgrading the Photoshop. I chose Photoshop CS and tried entering the serial number for the suite. It tells me that the serial number doesn't match the product chosen. Of course the only products I'm allowed to choose from is Photoshop CS, CS2, or CS3 and not Creative Suite Premium.
The other serial numbers on this CS is Golive CO and Pagemaker Plug-in.
I was told there are Adobe customer service reps here on the forum, please tell me what it was I need to do to get my Photoshop installed.
Thanks

i wasn't aware that you could get a ps4 at an upgrade price using an older creative suite produect. i searched online and found this thread (http://forums.adobe.com/thread/476009) which makes it appear that was not a valid upgrade path.
but, if you're confident that was a valid upgrade path, i'm pretty sure something will need to be done on adobe's end and no amount of manipulation, on your end only, will work.
your best bet would be to get help in this forum from an adobe staff member like jeff wright who is very knowledgeable and goes out of his way to help adobe customers. to that end, if i were you, i would start a new thread mentioning his name in your title and in your initial post explaining:
you have the educational Adobe Creative Suite Premium and purchased a photoshop cs4 upgrade years ago that required adobe support help to install years ago.
that worked well until a recent computer problem forced you buy a new laptop and you are now trying to reinstall that ps cs4 and again need support help but have been refused help because cs4 is not current.

HT1296 Need help with sync from phone to computer

When I sync my phone to my laptop, I would like info I entered on the calendar on my phone to be added to the calendar on my computer. I can only get it to sync from computer to phone. I need to update both
any ideas. I have searched the help files and can't find this anywhere

My problem is similar. I just upgraded from the 4S to the 5 and I used to be able to sync the calendar on my iMac and iPhone using iCloud without getting duplicates by selecting/deselecting the appropriate calendars on the respective devices. Everything synced as I entered it.
I'm pretty sure it was working with the 5 until recently...
Today I noticed that an event I entered on the 5 for last week didn't show up on my iMac. When I checked the EDIT screen on the phone to see what calendars were checked, only the calendar for that event was (on the All on my iPhone). All but the Unfiled calendar are checked on the All on my iCloud. When I unchecked and rechecked the calendars under the Phone didn't help. Can't get the thing to sync...
Seems like most people are having problems with Exchange accts, but here I am with my iMac/Phone/Cloud...

Need help with calc from tables

I have a table that contains query #1 and have another table
that contains a field that needs to use the result of the cfset in
another calc.
The new calc in query #2 needs to divide the Num_Checks_Trans
from query #1 by the by the Weekly_Hours_Recorded in query #2.
Can anyone help me figure this out?
<b>1.</b>
<cfquery name="QryEmployeeDetail"
datasource="NBProdReports">
SELECT TblContractInfo_SubMenuTable.User_ID,
TblContractInfo_SubMenuTable.Contract_Number,
TblContractInfo_SubMenuTable.Transaction_Type,
TblContractInfo_SubMenuTable.Num_Checks_Trans, TblTransType.Value,
TblContractInfo_SubMenuTable.Notes, TblMasterTrans.Date_Opened
from TblContractInfo_SubMenuTable, TblMasterTrans,
TblTransType
WHERE TblContractInfo_SubMenuTable.Task_Number =
TblMasterTrans.Task_Number
and TblTransType.Transaction_Type =
TblContractInfo_SubMenuTable.Transaction_Type
And TblMasterTrans.Date_Opened BETWEEN
#createODBCDate(DED_startDate)# AND #createODBCDate(DED_endDate)#
order BY TblMasterTrans.Date_Opened ASC,
TblContractInfo_SubMenuTable.User_id ASC
</cfquery>
<cfset totalTrans = 0 />
<cfloop query="QryEmployeeDetail">
<cfset totalTrans = totalTrans +
(QryEmployeeDetail.Num_Checks_Trans * QryEmployeeDetail.Value)
/></cfloop>
Text
2.
<cfquery name="QryEmployeeDetail"
datasource="NBProdReports">
SELECT TblContractInfo_SubMenuTable.User_ID,
TblContractInfo_SubMenuTable.Contract_Number,
TblContractInfo_SubMenuTable.Transaction_Type,
TblContractInfo_SubMenuTable.Num_Checks_Trans, TblTransType.Value,
TblContractInfo_SubMenuTable.Notes, TblMasterTrans.Date_Opened
from TblContractInfo_SubMenuTable, TblMasterTrans,
TblTransType
WHERE TblContractInfo_SubMenuTable.Task_Number =
TblMasterTrans.Task_Number
and TblTransType.Transaction_Type =
TblContractInfo_SubMenuTable.Transaction_Type
And TblMasterTrans.Date_Opened BETWEEN
#createODBCDate(DED_startDate)# AND #createODBCDate(DED_endDate)#
order BY TblMasterTrans.Date_Opened ASC,
TblContractInfo_SubMenuTable.User_id ASC
</cfquery>

This can be rewritten as a single query which is good for a
number of reasons, including we only make one trip to the database
and we do our calculations on the SQL backend, which is faster than
doing them in CFML.
What you're going to want to do is SUM() the total
transaction values by having a column like SUM(Num_Checks_Trans *
Value) AS totalTrans. To get the value for your other column you
can calculate that like Num_Checks_Trans / Weekly_Hours_Recorded. I
didn't see the latter in either of your queries so I'm not sure
where it comes from, but you can definitely use it in your SELECT
clause when calculating.
Since SUM() is an aggregate function, you'll have to use a
GROUP BY clause to make it work. You'll have to GROUP BY each
column in the SELECT statement. If some of the columns have
differing data that you won't want to use in the GROUP, you can
always use a nested subquery as part of your FROM clause and then
join that to the original queries with the totals.
I hope that helps.
- William

Need help with a basic java thing..

Sorry, just started java a few weeks ago and i'm having trouble figuring out how to do something.
I wanted to know how to make this work. It cant be more than 6 characters in length and of those six characters, the first two have to be letters only, followed by a dash (-) and then three numbers. EG: ab-234 or gf-643...
Im using it as a serial number generator type thing, thats only one part of the entire program, but I cant figure it out.
Just need the most basic way to do that if anyone could help! been looking for hours in a couple java books i have and dont know where to look or what to look for!!
Any help figuring out the code for that would be great! Here's what I have so far and how i need the rest to be implemented! Thanks! PS: using TextIO
<code>
String itemNum1
     itemNum1 = new String ( " Enter Item Number(AB-123): " );
     TextIO.put("\n" + itemNum1);
     itemnum = TextIO.getlnString();
</code>

Oh hey sorry, i figured the bit of text i put in there
would be enough. I basically need a user to enter the
information, but i just need to know (or get a hint)
of how to prevent them from entering an invalid
number/serial code type thing in regards to the
parameters that I need met. (such as no more than 6
chars, but alternating numbers/letters). I presume I
use the char and not the getlnString command but
nonetheless im still stuck as to how I'd manage that.
Do i need to code each character seperately? (such as
letters by themselves, then another prompt to enter
the numbers??) or is there a way to get it all in one
go?
Thanks for any advice! oh and Sorry for the bad
wording in my question :P.
You could read the String from console using something like
public static String readWord()
   { int ch;
      String r = "";
      boolean done = false;
      while (!done)
      { try
         { ch = System.in.read();
            if (ch < 0
               || java.lang.Character.isSpace((char)ch))
               done = true;
            else
               r = r + (char) ch;
         catch(java.io.IOException e)
         { done = true;
      return r;
   }you would have to modify it according to your needs and after that you could use the String API to confirm if the user has entered it right or not. If not you could ask him to do that again

New ipod need help with songs from old one NEED HELP!!!!

I got a new ipod nano 3rd gen. but it wont let me take all of my old songs from my old ipod(nano 1st gen) and put them on my new one! I dont want to lose my songs so PLEASE HELP!!

When I did that on my old ipod and it said doing so will delete all the songs on it and replace it with my library. When I did it on my new ipod it just put the songs that was already in that playlist back on the ipod, not the songs that i need from the old one.

Need help with porting from Java 1.1 to 1.4

Similar Messages

Maybe you are looking for